Control keys stop working after the last tigervnc upgrade

I've upgrade to the last tigervnc package (tigervnc-1.3.0-1-x86_64.pkg.tar.xz) and control keys like CTRL+C, CTRL+V stop working.
Is someone facing the same problem?

Yes, I have the same problem.  It seems to be the viewer as I can connect to the server with
a different vncviewer (tightvnc) and all keyboard control keys work.  I ran xev and pressing
CTRL-T and it shows:
KeyPress event, serial 34, synthetic NO, window 0x2c00001,
root 0x13d, subw 0x0, time 272693323, (-452,-13), root:(362,803),
state 0x0, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
KeyPress event, serial 37, synthetic NO, window 0x2c00001,
root 0x13d, subw 0x0, time 272693402, (-452,-13), root:(362,803),
state 0x4, keycode 255 (keysym 0x1000014, (no name)), same_screen YES,
XLookupString gives 1 bytes: (14) ""
XmbLookupString gives 1 bytes: (14) ""
XFilterEvent returns: False
KeyRelease event, serial 37, synthetic NO, window 0x2c00001,
root 0x13d, subw 0x0, time 272693530, (-452,-13), root:(362,803),
state 0x4, keycode 255 (keysym 0x1000014, (no name)), same_screen YES,
XLookupString gives 1 bytes: (14) ""
XFilterEvent returns: False
KeyRelease event, serial 37, synthetic NO, window 0x2c00001,
root 0x13d, subw 0x0, time 272694875, (-452,-13), root:(362,803),
state 0x4, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
The
(keysym 0x1000014, (no name))
shows up on a normal xserver as
(keysym 0x74, t)
I'm not sure how to fix it though.

Similar Messages

  • Brightness control keys stop working after booting MacOSX

    I bought a new iMac 27" a couple of weeks ago, and I installed Windows 7 using bootcamp.
    All the control keys (brightness, volume, etc) works ok on Windows until I reboot it in MacOSX. When i start windows again, brightness controls keys stops working, leaving the screen with the maximus bright, which is killing my eyes.
    Reparing boot camp drivers doesn't do the trick. Am I missing something?

    Try fn + the controls. It might be that Windows defaulted to those buttons as F1, F2, etc. Using fn while pressing the buttons will 'tell' Windows that it has to listen to the Bootcamp software and lower the brightness.

  • Why did AME stop working after the last Windows 7 update

    AME suddenly stopped working after the last Windows 7 update. After the initial splash screen, I get a message saying that AME is not working and the program will be closed. Then I get the windows message that it is searching for a solution, then nothing. I am using the Production CS6. This happens whether I try to start AME directly, or queuing through Premiere Pro. I have tried reinstalling the entire package and have implemented all available updates from Adobe. I have no clue why this happened, but AME is crucial to my workflow.

    Try to delete the following folders and then launch AME:
    %AppData%\Adobe\Adobe Media Encoder
    %AppData%\Adobe\Common
    Make sure to first make a backup of those folders.

  • I have been using GRAB to capture screen displays.  It has just stopped working since the last OSX Upgrade.  Can anyone, please help restore functionality?

    I have been using GRAB to capture screen displays.  It has just stopped working since the last OSX Upgrade.  Can anyone, please help restore functionality?

    Thanks for that.  I did as suggested but when I tried again, it still did not work.  Another  com.apple.Grab.plist appeared in the Library.
    I now have the following files in Library
    file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.LSSharedFil eList.plist
    file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.LSSharedFil eList.plist.lockfile
    file://localhost/Users/peterpatel/Library/Preferences/
    file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.plist.lockf ile
    What do you suggest I do now?

  • Internet Don't work after the last IOS Upgrade. What can I do?

    Internet Don't work after the last IOS Upgrade. What can I do?

    Can you give us more details?
    Is Wi-Fi working, i.e. not greyed out in Settings/Wi-Fi?
    Can you go online by using the Mobile Network?
    Any error messages given?
    Problem with your router?
    See these articles for help with Wi-Fi issues:
    Issues with Wi-Fi networks and connection
    Wi-Fi or Bluetooth settings grayed our or dim
    If you see No Service in the status bar of your iPhone or iPad - Apple Support
    iOS and OS X: Recommended settings for Wi-Fi routers and access points

  • I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function works

    I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function, render workspace function, export file are still operational. How can I fix it so I may complete my assignment?
    Besides DaVinci Resolve, Adobe Creative Suite 6 is the only software on the machine. I am using Windows 7 Professional 64-bit Operating System on AMD FX 6100 six-Core Processor at 3.31gHz and 32 GB RAM memory. There are two SLI-bridged GTX680 NVidia cards.
    The software was very stable for the last six months, working with 720P proxy files from 2.5K masters (Blackmagic Design Camera). I am working on a feature-length project that exceeds 1000 edits. I have broken the file into 2 one hour segments.
    I have deactivated the software before reinstalling the entire OS from scratch. PP6 was very stable for 48 hours. Then the freezing space bar returns. After a dozen strokes into the project, same problem.  I have made cache files store next to originals, I have deleted preview files if they were corrupted and causing instability. Am I missing something?
    I have Microsoft Security Essentials for virus protection. I double checked the memory for damage/defect. Nothing says that the motherboard or other components are damaged.
    I am in film competition overseas and need to have deliverables in less than a month's time.  I lost the last two weeks troubleshooting and this crisis came at an inopportune moment of the project.
    Any assistance would be greatly appreciated.

    Still getting software freezes but found a way to mitigate for the mean time.
    Upon launching Adobe Premiere Pro, hit CTRL-ALT-DEL to launch TaskManager as well.
    You will want to highlight Adobe QT32 Server.exe
    Right click and select "End Process Tree"
    You will get considerable stability in the program, long enough to get timing of cuts done. Be sure to save often.
    If the program freezes, do not hit Save. You definitely want to avoid saving the corruption into your TimeLine
    CTRL-ALT-DEL to relaunch the TaskManager and highlight Adobe Premiere Pro.exe
    Right-click to "End Process"
    No need to reboot the whole system; just launch Premiere Pro again and continue with the session. Note that your work reverted to Last Save.
    Hope this helps until the bug is fixed.

  • My "9-o-l-." keys stop working after startup, and spreading! ahh help?

    My "9-O-L-." keys stop working after startup and my arrow keys too.
    Sometimes when I start up the keys will work for a bit then one by one stop functioning and then randomly work every so often, then it seems to "spread" to the right shift key, and sometimes the "8-I-K-," keys.
    Around the same time when this all began my Battery completely stopped working too, does this have anything to do with it? I've reset my PRAM and no luck.
    I'm planning on replacing the keyboard, will that fix the problem? or is it something deeper?
    Thanks in advance!
    -Andrew

    I assume you've rebooted? Can you control the computer well enough to make a new account and log into it? Doubt this will fix it but maybe. The keyboard may need replacing but it might also be that the cable has worked loose so that some of the wires have disconnected but not all. Sounds like a trip or call to Apple is in order.

  • The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu

    PROVA

    Yes, I know that, but I ever work with the right mouse button,
    because selecting groups and subgroups with double click make some confusion for me.
    Regards,
    Fabio
    ufficio tecnico
    grafica e prestampa
    Via Verdi, 11 - 43058 Sorbolo (PR)
    Tel. 0521.694111 - Fax 0521.694360
    E-mail: [email protected] <mailto:[email protected]>
    E-mail: [email protected] <mailto:[email protected]>
    Web: www.litoexpress.it <http://www.litoexpress.it/>
    Il giorno 28/ott/2014, alle ore 06:57, Satinder S Bains <[email protected]> ha scritto:
    The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu
    created by Satinder S Bains <https://forums.adobe.com/people/SatinderSBains> in Illustrator - View the full discussion <https://forums.adobe.com/message/6874053#6874053>
    You can double click on the selected object to get into the multilevel isolation mode.
    Regards,
    Satinder
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6874053#6874053
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

  • My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update.

    My apple remote app on my iPhone 4S has stopped working after the 7.0.6 security update. It's not my home sharing or router setting, I have an ipad that I haven't yet updated that works completely fine and my network is run on the newest AirPort Extreme.

    i have same problem but much worst.. i update my iphone4s ios 7.1.1 to 7.1.2 and my iphone CAN'T READ MY SIM, MODEM FIRMWAY GONE, IMEI GONE, and same issue as you guys can't hear sound on my speaker but using earphone works, battery drain much faster than before. Any suggestion guys to Fix my iphone.thanks a lot. APPLE PLEASE FIX. TAKE ACTION.

  • Hi i have iPhone 4S and some of the apps i've bought or downloade for free don't work after the last update iOS 6.0.1.Can you tell me why?

    I have iPhone 4S and some of the apps I've bought don't work after
    the last update iOS 6.0.1
    Can you tell me the reason?

    most likely the app developer havent made it compatible

  • Mail exchange stop working after the latest upgrade, how do you reboot it to restart again

    Mail exchange stop working after the latest upgrade, how do you reboot it to restart again

    Hmmm, here's the opposite problem/fix...
    Gmail send but not receive...
    Here are two steps that have come in handy in related situations
    1) login to gmail on your computer or device via a web browser
    2) once logged in successfully, go to this URL to unlock:
    https://www.google.com/accounts/DisplayUnlockCaptch
    Is your gMail POP or IMAP?
    If IMAP...
    Is the Outgoing server smtp.gmail.com, port 25, SSL on, & Authentication = Password

  • I'm unable to update my apps or download new apps to my Iphone. When I try I get a message "An unknown error has occurred".  It was happening before and after the last OS upgrade.  I've done a hard reboot with no effect.  Any suggestions???

    I'm unable to update my apps or download new apps to my Iphone. When I try I get a message "An unknown error has occurred".  It was happening before and after the last OS upgrade.  I've done a hard reboot with no effect.  Any suggestions???

    Have either of you had any luck with this issue.  It began happening to me today when I was trying to purchase music on iTunes.  I have purchased music and games in the past and have had no problem.  Any help would be appreciated.

  • Delete key stopped working after update

    The delete key stopped working last night after updating both safari and itubnes.

    No one has any ideas?

  • Lighting cables and adapters are not working after the last iOS 7 update.

    Looking for some help from Apple here. After the last iOS 7 update, some of my lightning cables and adapters have stopped working.
    I have an iPhone 5 funning iOS 7.0.2.
    I have a car charger/FM RF transmitter that has worked like a charm for years. Because none of these have been made with a lighting connector, I've had a genuine Apple adapter on it since I bought my iPhone 5 a year ago. Never had a problem until the last iOS update. Now when I plug it in, not connection is registered. I've verified the charger is working by removing the adapter and plugging the old iPhone connecting into an iPhone 4 running iOS 6. I've also verified the adapter is working by plugging the charger with adapter into an iPad mini running iOS 6.
    I also have a Belkin USB car charger. This came with a black lighting cable. Also worked like a charm until the last update. Now, half the file when I plug it in, no conncetion is registered. The other half of the time, it says this cable is not supported but does not connect my phone or charge it. I've also verified that the cable is working by plugging it into an iPad mini running iOS 6.

    I had the same bug. Powering off the phone and back on resolved the issue

  • Satellite A105 Shift Keys stop working after BIOS update

    I have a stack of laptop boards from the A105 series (Intel chipset) that I received with bad BIOS's. Two worked, and I updated the BIOS's on them to fix CPU compatibility issues. After that, the shift keys stopped working, and pressing Shift-A causes the power light to dim. Reverting to ANY previous version BIOS, whether through the Windows program, CD, or Crisis Recovery floppy (magic key is "F", not "B", "Esc", or "U"), does not fix the keyboard problem.
    To make things more confusing, I did notice that the one single BIOS that seems to actually correct the problem is version 1.50, which I haven't seen available for any Tecra A7 or Satellite A100/A105, except a couple A100's, but the BIOS file is much too small and can't be loaded.
    Does anyone have any idea why these Intel-based boards are doing this? Or does anyone know where I can get a usable version 1.50 BIOS?
    For the sake of this post, please consider my skill level to be high. (In other words, I would be thankful for people trying to help with "Replace the keyboard", but I have about a dozen keyboards, all of which I have tried, and all of which work on other laptops. Additionally, if you have just a theoretical solution, I'm definitely open to hearing it. Also, if a Toshiba tech would like to reply, I would very much appreciate it!)

    Hi, thank you for your help.
    Some motherboards were not in chassis when I got them. Is there a place the PSAAxx model number would be written on the boards?
    Four PSAA8U (Two A105-S4334 and Two A105-S4014) - Intel Chipset, fingerprint reader. Tried BIOS Versions 1.40, 1.70, 2.00, 5.10, 5.60, 5.90, and 6.00. Shift keys do not work on either one.
    Two PSAA2U (A105-S2091 and A105-S2031) - ATi Chipset. BIOS versions 1.50, 1.80, and 2.30. Keyboard works.
    Another PSAA8U (A105-S4184) - Intel Chipset, no fingerprint reader. BIOS version 6.00. Keyboard works.
    I noticed that so far all of the models with fingerprint readers have the problem. All of the ATi Chipset boards are working fine, but they have significant processor limits. I am in the middle of updating the BIOS in another Intel one using a Crisis Rescue Disc, so after that finishes I will try disconnecting the fingerprint reader to see if it has an effect.
    I don't think the keyboard controller is faulty, because these boards all failed on the same day. I have tried updating the BIOS using WinPhlash, Phlash16 in DOS, the install CD, and a Crisis Recovery Disk. I set the defaults in the BIOS almost every time, and I also have tried holding the power button for 60 seconds with the power cord unplugged and the battery removed (as some people have suggested.)
    The shift keys don't work in DOS, Linux, Windows, or even in the BIOS. I test it in the BIOS by using Tab to cycle through the fields in time of day, then Shift-Tab to cycle backwards. This works with a USB keyboard, and it also works on the ATi chipset models and the Intel chipset models that are still working.
    Thank you for your reply. (-:

Maybe you are looking for