Control M Monitoring tool in XI

what is control M in PI and how to use it for monitoring in PI

"Control M" is monitoring tool for SAP provided by BMC software.
Not sure whether you are looking for this.
-Pinkle

Similar Messages

  • Available resource monitoring tools

    Hi,
    Hi I'm evaluating my option to monitor resource utilisation by domains. The categories I'm interested in are CPU, Mem, Disc and I/O utilisation. What monitoring tools exist? Searching the web, I've seen Without having access to an oracle server, yet, the resource categories of sample output of 'xm list' I've seen so far only contained CPU and mem utilisation but not any I/O (disk or net). Is this correct? And what options have I got to monitor these resources as finely as possible?
    Best regards and thanks for your help

    Would you like to perform the monitoring from control domain or guest domains? If you do the monitoring inside guest domain, then I guess you can use SNMP tools for the job. I've used Orca and SEtoolkit inside guest domains (they don't use SNMP) but they are a bit outdated for that use. You might also take a look at Zabbix.
    I don't know what tools exists for collecting information from control domain (which would require less work and less installed clients etc.). Maybe some custom scripting with SNMP.

  • Best proactive monitoring tool

    HI,
    Please advise the best network proactive monitoring tool, that can raise auto-alert tickets with Remedy software.
    Thanks

    1 Spotlight works in about the same fashion as Grid Control/OEM, so you need a database to store metrics
    2 Grid Control can also take care of Oracle patches, notifying you a patch has been released, and optionally install it, and even of O/S patches
    3 Spotlight is a product of a third party, so it will always be less tightly integrated with Oracle
    4 The Grid Control is interfaced by means of a browser, whereas Spotlight needs a fat client. If you want to have Spotlight on multiple systems, you have to buy it multiple times.
    Sybrand Bakker
    Senior Oracle DBA

  • Monitoring Tool for Oracle

    hai all ,
    my company ask me about tools to monitoring oracle .
    tools can have capability to monitor :
    Response Time
    User Activity
    Status
    Table Space Usage
    Table Space Details
    Table Space Status
    SGA Performance
    SGA Details
    SGA Status
    Performance of Data Files
    Session Details
    Session Waits
    Buffer Gets
    Disk Reads
    Rollback Segment
    Queries, Locks
    and others
    there's anyone have idea or suggets what tools is ?

    Imron Siagian wrote:
    hai all ,
    my company ask me about tools to monitoring oracle .
    tools can have capability to monitor :
    Response Time
    User Activity
    Status
    Table Space Usage
    Table Space Details
    Table Space Status
    SGA Performance
    SGA Details
    SGA Status
    Performance of Data Files
    Session Details
    Session Waits
    Buffer Gets
    Disk Reads
    Rollback Segment
    Queries, Locks
    and others
    there's anyone have idea or suggets what tools is ?Oracle Grid Control
    http://www.oracle.com/technetwork/oem/grid-control/overview/index.html
    OEM
    http://www.oracle.com/us/products/enterprise-manager/index.html
    Oracle Application Management Pack
    http://bit.ly/IOu5cD
    Oracle Database Monitoring Tools
    http://bit.ly/IOucF0
    Thanks,
    Hussein

  • Monitoring tool for SunFire V210

    Hello,
    We are running a couple of SunFire V210. These servers are doing their job and we never have to touch them, this is the main reason why we have no expertise on these servers.
    One of the servers indicators is actually yellow, so I reckon I must have some Hardware issue with it. Is there any monitoring tool available on Solaris to perform a diagnostic (equivalent od Dell OpenManage on Dell server)?
    Thanks a lot for your time.
    Fred

    There is no "best" monitoring tool for AS. It all depends on what your shop is using currently for monitoring of other servers / services. You could monitor your AS using AS Control, but it doesn't send you any alerts etc. OEM might be a good choice, but not if you have to install (and but) it for one server etc. etc.

  • Monitoring tool for 10gAS

    Hi ,
    As my setup is running oracle 10g application server on Red hat Linux , iam looking for a monitoring tool to monitor my applications server, please suggest me which tool is best for monitoring and administrating
    regards
    Syed

    There is no "best" monitoring tool for AS. It all depends on what your shop is using currently for monitoring of other servers / services. You could monitor your AS using AS Control, but it doesn't send you any alerts etc. OEM might be a good choice, but not if you have to install (and but) it for one server etc. etc.

  • Oracle EPM 11.1.2.1 Monitoring tools

    Gurus,
    could you please let me know what are the available system monitoring or performance monitoring tools for oracle EPM 11.1.2.1 or in case licenses are involved what are the best key areas for manual procedures to monitor the system?
    Many thanks !

    Hello,
    Monitoring is a broad term. There are many 3rd party tools available that can provide monitoring, it all depends on what exactly you're looking for.
    Oracle has a document on setting up Oracle Enterprise Manager to monitor Hyperion Applications: http://www.oracle.com/technetwork/middleware/bi-foundation/sys9-oem-integration-1-129287.pdf. For performance monitoring, you can also look at this: https://blogs.oracle.com/pa/entry/epm_11_1_2_how3. This will basically connect to the JRockit JVM and look at the performance for the web application.
    If you want to do more monitoring (services, servers, processor, CPU), you can look into Hyperic HQ: http://www.hyperic.com/. They have both an open source version and an enterprise version. I've used the open source version myself and it is pretty good and plays well with Windows. You can see many metrics, graphics and information via the web based application. You can also setup email alerts on certain activities (service stop, service start) and also monitor website availability. For being an open source software, I think it offers alot and it is very reliable.
    Again, these are just a few suggestions. There are many tools out there that can accomplish what you're looking for.
    Regards,
    Luis

  • Create Remote Control and Monitor VI

    Hi all,
    I have 2 VIs. One is PC Host VI and other is cFP2200  real-time running VI.
     Now I can use PC host and cFP shared variable to control and monitor in the same network.
    But I have a problem that I need 2 or more cFP in the same network.How can I seprate to control themone by one?
    They are using the same program but set with different IP.
    Does shared variables are using fix IP and can I type the cFP2000 network IP in PC Host VI to select different cFP?
    How to do ?
    Thanks.
    Robert

    Hello Robert,
    You will need to use a separate shared variable for each cFP. You can create a Case Structure in your Host VI to select which shared variable to use based on which cFP you select. I think that's the simplest option for you.
    There is also a way to programmatically change the data binding for a shared variable, but this requires the DSC Module. Take a look at this article if you want to check out this option: http://digital.ni.com/public.nsf/allkb/2E8BAD0EA218A7558625712E0003F044?OpenDocument
    Product Support Engineer
    National Instruments

  • Where can i check in the real time monitoring tool if there are active calls in progress?

    where can i check in the real time monitoring tool if there are active calls in progress? 

    Hi
    Selecting Call Manager -->Call Process ---> call activity
    HTH
    Regards
    Carlo

  • Please suggest DB monitoring tool

    Our DB have some performance issues, I need your suggestions to buy a DB monitoring tool to help us to resolve these problems.
    If you can share your experiences on the tool, it will be the best.

    Hi,
    We don't have enough knowledge on DB.In that case, beware of tools that make recommendations that you cannot understand . . .
    Some advanced monitoring tools can be cryptic for beginners.
    Is OEM or Statspack suitable to a beginner? Beware, the OEM diagnostic pack and the OEM performance pack are really expensive, over $6,000 per seat:
    http://www.dba-oracle.com/news_tuning_packs_price.htm
    Plus, consider 3rd party tuining tools.
    Historically, Oracle tools have had a bad reputation, and Oracle's Oracle Expert tool was widely criticized for making ridiculous tuning recommendations . .
    Everybody has a monitoring tool to plug, I even have a few that I wrote myself.
    There are a zilllion of them, but they all offer test drives, but try to find:
    - A monitoring tool that makes recommendations in plain English
    - A tool that is reasonably priced
    - A tool from a well-know vendor with a good track record
    Lastly, if you are not familiar with Oracle tuning, it may be better and cheaper to buy an Oracle health check.
    A guru can find tuning problems in just a few hours, faster and more efficient that using a tuning tool.
    Hope this helps . . .
    Donald K. Burleson
    Oracle Press author
    Author of "Oracle Tuning: The Definitive Reference"
    http://www.rampant-books.com/t_oracle_tuning_book.htm
    "Time flies like an arrow; Fruit flies like a banana".

  • Messages are Holding in message monitoring tool

    Hi All,
    I am facing the problem with messages which are in holding state.
    My scenario is file to proxy. The file content contains of EDI. my scenario is already gone to production last year.
    and its working fine. Used java mappings for validation of EDI file. its running successfully.
    where as in Dev system till october first i used to load the files in FTP inbox folder and messages were processed successfully.
    But from october first week when i load the files in FTP inbox, file has been picking succesfully and can see the logs in sender comm channel  but the i can see that my interface is in holding state in message monitoring tool and its not going to receiver comm channel. I have loaded 5 files and all are in holding state. 
    even i have cancelled first error message and tried to resend the next message swhich is in holding state, but this is not happening.
    i am using EOIO queue.
    when i cancel the error message remaining messages should processed automatically but its not getting processed here.
    sequencing of the interface triggering is
    1. Interface_1
    2. Interface_2
    3. Interface_3
    4. Interface_4
    Here i am stucking up with the first interface itself.Here only first interface is in holding state.
    can any one advise what could be the problem..
    I m on SP 10.
    Thanks,
    Bhaskar

    Hi Abhijit,
    Even after unchecking the checkbox maintain order at runtime, its not working.
    i think there is no disturbed in message processing sequence.
    my first sender interface itself going into hold state.
    i have cancelled the hold message, even after that remaining messages are processing automatically.
    and also i could not fine any messages in SMQ1 and SMQ2.
    I also deresister and registered te queues and activated.
    Kindly advise what would be the problem..
    in production its working fine and development its not working fine.
    Thanks,
    Bhaskar

  • Monitoring Tool for Monitoring Business Process

    Hi All,
    Is there any monitoring tool which is able to monitor various technologies .
    we are integrating biztalk with SAP and we are looking for a tool which we can use to monitor both, is there any?
    Praj Dixit

    Hi All,
    Is there any monitoring tool which is able to monitor various technologies .
    we are integrating biztalk with SAP and we are looking for a tool which we can use to monitor both, is there any?
    Praj Dixit
    If if want just to monitor various technologies, lets say BizTalk, then there are lot of tools available for this. BizTalk 360 and SCOM are two main tools.
    similarly if you want to monitor SAP- like availbility of SAP services/URLS/Databases etc, then HP OpenView can be one option.
    However, if you just want to make sure your business process ( integrated BizTalk/SAP..etc) are up and running then you could write some Automated Smoke test scripts, which will perform some basic testing and make sure all components are up and running. 
    Hope this helps. 
    Greetings,HTH
    Naushad Alam
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or
    Mark As Answer
    alamnaushad.wordpress.com

  • What is Business Process Monitoring Tool (BPMT)?

    Dear colleagues
    There is also a strange tool named Business Process Monitoring Tool (BPMT), provided as an Add-on installation within SAP Netweaver 701 SP06
    [Note 1453759 - BPMT 701 Business Process Monitoring Tool: Installation|https://service.sap.com/sap/support/notes/1453759]
    What is it, and how it is connected with SAP NW BPM?
    Any explanation would be much appreciated

    Hi,
    this tool is to provide a business process monitoring within the ABAP stack. So you're able to get information about "how many processes of process X have not been finished, yet". This is based on several agents listening to the business process implementations (e.g. SAP Business Workflow) and provides those generated events to a monitoring engine.
    As far as I know this component has not been released, yet. I don't know the delivery date (maybe in QII or QIII 2011) --> who know's?
    Cheers
    Martin

  • BEST DB MONITORING TOOL

    hai every body ,
    from your experience which is the best DB monitoring Tool ...?
    my purpose is to watch the activities(insertion,deletion,updation on which tables?)  when an application is working...
    or is there any other oracle supplied packages,which satisfies my purpose...?
    please specify to me...
    thanks in advance...
    john

    Hi John,
    which is the best DB monitoring Tool ...?For proactive monitoring, you cannot beat STATSPACK, all free . . . .
    For reactive monitoring, I like Quest Spotlight and Confio Ignite.
    my purpose is to watch the activities(insertion,deletion,updation on which tables?) when an application is working...That not monitoring, that's auditing!
    You can use LogMiner for free . . .
    Hope this helps . . .
    Donald K. Burleson
    Oracle Press author
    Author of "Oracle Tuning: The Definitive Reference"
    http://www.rampant-books.com/book_2005_1_awr_proactive_tuning.htm

  • Best monitoring tool

    Well here we are, my application is ready for distribution,
    now i would like to know what is the best free monitoring
    tool for a coldfusion server?
    I found the metrics data in the coldfusion server, but i
    would like to have some more monitoring information for my
    resources, db load etc.
    any ideas?

    Regarding performance monitoring on your CF-server, are you
    running a multi-server configuration?
    If not, you can use the performance monitoring mechanism
    built into CFMX. Simply log into the CF-Administrator, and under
    "Debugging Settings", you'll find a checkbox waaaaay down at the
    bottom of the page which reads "Enable Performance Monitoring".
    Turn that on. What it actually does is tie directly into the
    Windows (NT) built-in performance monitor reporting tool.
    (This of course assumes you're hosting your CF-server on a
    WIndows box - which most people do)
    However, if you're running in a multi-server configuration,
    this performance monitoring option is no longer available to you I
    believe. Bruce Purcell has some good notes on the topic of
    performance monitoring on his blog here:
    http://www.bpurcell.org/blog/index.cfm?mode=entry&ENTRY=967
    Personally, I've found the JRun Metrics service to be
    invaluable. It is one of the only built-in options for performance
    monitoring that ColdFusion offers for a multi-server environment as
    far as I know.
    Regarding your DB server, that is an entirely different topic
    (unrelated to ColdFusion). You should contact your DBMS vendor for
    more information on that.

Maybe you are looking for