Control of LR and image location

This is number three attempt so not sure how many times this will show up.
I have the new LR and when inserting my SD/CF II card into the card reader the images have no choice but to go to LR which in NOT where I wish them to reside. I have a separate HDD for my files and want to be able to place my new images in appropriate folders on the HDD where I keep My Pictures. Please advise how to do this. TIA
Secondly, I also only want to use LR to a couple of specific things for me with particular images. One is that I would like to be able to use the straightening/perspective control and/or noise reduction on specific images but am unable to find out how to load only those specfic images when needed into LR. Any info about how to do this would be appreciated.
Lastly, at the moment, does this forum allow for any means of selecting to have instant email notification of responses to questions?
TIA
MW

I have the new LR and when inserting my SD/CF II card into the card reader the images have no choice but to go to LR which in NOT where I wish them to reside. I have a separate HDD for my files and want to be able to place my new images in appropriate folders on the HDD where I keep My Pictures. Please advise how to do this. TIA
Your images do not "go to LR".
Lightroom NEVER stores your images inside of Lightroom.
Even if you use this Lightroom dialog box, your photos will always be stored on one of your hard disks, whereever you specify. If you want them in a specific folder on a specific hard disk, you instruct Lightroom to put them there, using the destination panel on the right of the Import dialog box.
http://tv.adobe.com/watch/getting-started-with-adobe-photoshop-lightroom-5/lightroom-5-imp orting-your-images/
Secondly, I also only want to use LR to a couple of specific things for me with particular images. One is that I would like to be able to use the straightening/perspective control and/or noise reduction on specific images but am unable to find out how to load only those specfic images when needed into LR. Any info about how to do this would be appreciated.
Any time you want to operate on a photo(s) in Lightroom, you must first import it(them) into Lightroom (see above)
Do you really mean that you ONLY want to use LR to do a few things? Seems like there would be less expensive and cumbersome solutions than Lightroom ... Lightroom is an excellent way to organize and search for your photos, it is an excellent way to do much (maybe even all) of the editing required, not just perspective control and noise removal, it is an excellent way to distribute/share your photos ... if you are intent on using only limited features in the develop module seems like the equivalent of purchasing an expensive sports car and then choosing to only use two gears.

Similar Messages

4.2.2 upgrade from 4.1 and images location issue

I've just upgraded from 4.1 to 4.2.2, and am having an issue with the referenced location of the images directory (/i/) resources. I am running apex listener on weblogic server, and have copied the new images into the i.war that I use. I have an unusual reverse proxy situation where my base URL includes a path, i.e., https://www.my.website.com/mysite/ is the URL that the proxy returns to the user, so my APEX addresses look like https://www.my.website.com/mysite/apex/f?101:1:::::, and my image directory references get put together like https://www.my.website.com/mysite/i/image.jpg.
However, with the upgrade, one of the things that popped up was all of the datepickers in my application were changed to classic datepickers, which worked and displayed fine. When I change them to the new datepicker, the small calendar image doesn't show next to the field (red x), and when I look at the properties of the image, it's URL is https://www.mywebsite.com/i/asfdcldr.gif (no "/mysite/" path offset). ALL of the other images directory references seem fine, but not this. Has 4.2.2 changed how it composed the #HOST# when it's generating these new controls (same result when I make a datepicker from scratch)? Why do all of my other images directory references work? The only other problem that I'm seeing is that my charts no longer work, either. I used to have to hardcode my URL into the XML of the charts for them to work, but I don't see the URL referenced in the code anymore. Not sure if that's related, but that has always been an issue with my reverse proxy situation (I don't control the proxy server).
Thanks in advance for any light anyone can shed on this,
-warren

Hi Warren,
+> The only other problem that I'm seeing is that my charts no longer work, either. I used to have to hardcode my URL into the XML of the charts for them to work, but I don't see the URL referenced in the code anymore. Not sure if that's related, but that has always been an issue with my reverse proxy situation (I don't control the proxy server).+
With APEX 4.2, we've changed how charts are initialized to be JavaScript only, and as part of the changes, we no longer expose the region source for charts. See *4.8 Updated AnyChart Flash Charts* in the APEX 4.2 Release Notes, here: http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35121/toc.htm#CACEJBCD. So it's no longer feasible to hardcode a reference to your URL in the region source for a chart. If you have a reverse proxy, the CGI environment variables REQUEST_PROTOCOL, HTTP_HOST, SERVER_PORT, and SCRIPT_NAME, have to be correctly set to the public facing web server and not to the internal forwarding connection. If you execute the following query in SQL Workshop on your APEX instance, do you see the settings for the public facing web server?
select owa_util.get_cgi_env('REQUEST_PROTOCOL'), owa_util.get_cgi_env('HTTP_HOST'), owa_util.get_cgi_env('SERVER_PORT'), owa_util.get_cgi_env('SCRIPT_NAME') from dual;Regards,
Hilary

Catalog and image location confusion

New to this softwear.
imported photo from cd into lightroom. thumbnail images found in catalog. found in library. go to develop and light room can not locate file since its points to an cd drive.
so i deleted the image and loaded the image outside of lightroom on to the c drive. and from the c drive imported the image into lightroom. lightroom can not fide the file.
how to solve this problemm?ed catalog?

In general, you will not get an answer from Adobe in these forums. Instead, you will get an answer from other users, which in most cases, are sufficient to solve the problem.
Your specific problem is addressed in your other threads.

Plant and Storage Location determination at Item level during Copy control

Hello Freinds,
We are experiencing issues within Sales Order creation when the line item is referencing a contract. The plant and storage location is being determined from the contract - this should not be done, we have an enhancement in place for sales order plant/storage location determination which is how these values should be determined.
Kindly suggest, if it can be achieved through configuration setting at Copy control level, to avoid the Plant and Storage location determination from Contract in to Sales Order.
Thanks,
Anup Bansal

Hello
You can mention the additional logic of redetermining Plant and storage location whenever copied from contract.
In a sale order, i think you are maintaining a enhancement in prog MV45AFZB & user exit userexit_source_determination.
YOu can maintain the coding at same place.
thank you
Anirudh

How to use radioButton(s) and image controls on windows phone 8.1

how to use radioButton(s) and image controls on windows phone 8.1

Hi aspirantme,
>>how to use radioButton(s) and image controls on windows phone 8.1
Which version of your app is? Runtime or Silverlight?
For Runtime version, please see the following articles:
#RadioButton class
https://msdn.microsoft.com/en-us/library/windows/apps/windows.ui.xaml.controls.radiobutton(v=win.10).aspx
#How to add radio buttons (XAML)
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh868200.aspx
#Image class
https://msdn.microsoft.com/library/windows/apps/br242752.aspx
For Silverlight version, please refer to the following documents and guidelines:
#RadioButton Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.radiobutton(v=vs.105).aspx
#RadioButton control design guidelines for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/hh202881(v=vs.105).aspx
#Image Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.image(v=vs.105).aspx
#Quickstart: Images for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/jj206957(v=vs.105).aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do you control the position and size of images, i.e,. photo to the printer?

HP Officejet 8600
Windows XP
I am trying to figure out how to control the positon and size of photos or pics that are included in an email that I send to my printer via HP ePrint.
This question was solved.
View Solution.

Hey Old_Salt,
What model HP printer do you have?
ePrint is a very simple system when it comes to printing, because it doesn't provide as many controls as one may be used to with a computer. Many of the photosmart printers are designed to recognize a photo in ePrint and print the image to the proper photo paper.
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Need help with adding formatted text and images to Crystal Report?

Here's my scenario:
I have a customer statement that's generated as a crystal report and that has a placeholder for advertisement. The advertisement is mixture of formatted text and images. Until now we only had one advertisement that was always used on the report. The new requirement is that we would have a pool of hundreds of advertisements and would need to display one specific advertisement on the customer statement based on various marketing criteria. They key is that the advertisement content will be determined programmatically and cannot be hardcoded into the report. I'm using Crystal2008 with .net SDK.
Here are the solutions I thought of, but I'm still rather lost and would appreciate your help/opinion.
1) Pass HTML or RTF to the report
Not really sure if this is possible and how to get it done. Also how would I pass in images? Would display formatting be reliable when exporting to PDF?
2) Create each add as a subreport and append it programatically
I actually have this working, but I only know how to append a new section to the end of the report and then load the subreport to the section. I have no other controll of the placement. Is there a way to dynamically load a subreport to a predefined section in the main report? How about adding a dummy subreport in the main report as a placeholder and then replacing it with a different subreport? How could I do this?
3) Pass an Image to the report
I would create each advertisement as an image and then would somehow add the image to the report. How would I load the image and control the placement? Could I somehow define a placeholder for the image in the main report-maybe a dummy image to be replaced?
Thank you.

Hello Pavel,
I would got the third way.
You can use dynamic images in your report.
Just by changing the URL to the image the image can be changed.
Please see the [Crystal Manual|http://help.sap.com/businessobject/product_guides/cr2008/en/xir3_cr_usergde_en.pdf] and search for images.
or directly here
[Setting a Dynamic Graphic Location Path on an Image Object|https://boc.sdn.sap.com/node/506]
[Dynamic image and HTTP://|https://boc.sdn.sap.com/node/3646]
[codesample for .NET|https://boc.sdn.sap.com/node/6000]
Please also use
[Crystal Reports 2008 SDK Documentation and Sample Code|https://boc.sdn.sap.com/developer/library/CR2008SDK]
[Crystal Reports 2008 .NET SDK Tutorial Samples|https://boc.sdn.sap.com/node/6203]
Hope this helps
Falk

Help with adjusting spacing between thumbnails and image in slideshow

How can I adjust the spacing on the slideshow page?
Customer wants more space between the thumbnails at the top and the image(s). Can I move the image & navigation tool or adjust the image size relative to the thumbnails and navigation tool at the bottom?
Although I'm familiar with html source code and working on simple stuff at that level, I have yet to locate it in iWeb and make any adjustments.
If anyone has step-wise instructions, I'd appreciate it. Thanks much.

Although I'm familiar with html source code and working on simple stuff at that level, I have yet to locate it in iWeb and make any adjustments.
iweb photos page's elements: header controls, detail view and footer controls are generated by ajax widgets, so there is nothing to in page source for you to find.
If anyone has step-wise instructions, I'd appreciate it. Thanks much.
that would be the instruction on how ajax widgets build photos page... there is none.
you can send feedback to apple and ask for details on iweb widgets and tools to build widgets.
that said, it can be done... check out with safari: http://temp.cyclosaurus.com/DetailView_Rearranged/Photos.html
code is linked to my example, i don't do tutorial.

Labview Remote conection and acquire sound and image

Good afternoon for everyone,
What I want is the following:
1. º How do I record values from a graph in Excel by pressing a button (eg recording).
2. º How do I show my power picture and sound on my pc through the microphone and webcam laptop by pressing two buttons, for example sound "on" and picture "on" and do the "off" to both.
3. º How do I power fizar my IP, since I already did what was on this page and I can not communicate with any other PC.
http://redacacia.me/2010/10/15/internet-control-of-a-labview-vi-part-ii/
Please find attached the program.
Thank you and if I can help thanks a lot!
Best Regards,
FASP
Attachments:
imaqUSB.llb ‏174 KB
Menu_Final_tabs.vi ‏5532 KB

I'm sorry, but from your description I have no idea what you are trying to do. Ok, I see that LV is doing something, and that you want to acquire sound and images, and that the web is apparently involved. But,
How is Excel involved?
What is the web interface doing?
Where are the buttons you talk about pressing located?
What are the sound and video sources?
What version of LV are you using?
What is the network you are using?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Difference between .Backgroundimage and .Image paint behavior Form vs Picturebox.

In this code when I copy the image to picturebox1.background image the form does not paint the controls on startup and the paint event keeps firing repeatedly. When copy image to picturebox1.image the form starts properly and the paint event does not fire
(unless needed).
What is the difference between the .backgroundimage and .image that makes the form not paint the controls but repeatedly fire the form paint event?
Same behaviour if a form backgroundimage is used, but it does not have image property so it cant be stopped if copying to a form background?
Thanks.
Public Class Form6
Private Sub Form6_Paint(sender As Object, e As PaintEventArgs) Handles Me.Paint
Static t As Integer
t += 1
Me.Text = t.ToString
Using bmp As New Bitmap(400, 400)
Using g As Graphics = Graphics.FromImage(bmp)
g.Clear(Color.Red)
PictureBox1.Image = bmp.Clone
End Using
End Using
End Sub
Private Sub Form6_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Me.DoubleBuffered = True
End Sub
End Class
Copy to picturebox1.backgroundimages gives this startup without the controls painted and the form paint is continuously firing as can be seen in the form header text:
Copy to picturebox1.image and form startups up properly and does not keep firing form paint.
Edit: removed Me.Location = New Point(200, 100)
That does not cause a problem.

Hey Tom,
Well, i have been playing around monitoring the windows messages received by the form and the picturebox to see what was happening. I found the messages start changing right after the picturebox receives it`s first Paint message. Here is where
they start changing.
Using Image Property these are all the massages received after its first paint message is received.
PictureBox - msg=0xf (WM_PAINT) hwnd=0x37037c wparam=0x0 lparam=0x0 result=0x0
Form - msg=0x14 (WM_ERASEBKGND) hwnd=0x1303c4 wparam=0xffffffffeb0108b7 lparam=0x0 result=0x1
Form - msg=0xe (WM_GETTEXTLENGTH) hwnd=0x1303c4 wparam=0x0 lparam=0x0 result=0x5
Form - msg=0xd (WM_GETTEXT) hwnd=0x1303c4 wparam=0x6 lparam=0x342ee08 result=0x5
Form - msg=0xe (WM_GETTEXTLENGTH) hwnd=0x1303c4 wparam=0x0 lparam=0x0 result=0x5
Form - msg=0xd (WM_GETTEXT) hwnd=0x1303c4 wparam=0x6 lparam=0x342ee08 result=0x5
Form - msg=0x318 (WM_PRINTCLIENT) hwnd=0x1303c4 wparam=0xffffffffeb0108b7 lparam=0x4 result=0x0
PictureBox - msg=0x14 (WM_ERASEBKGND) hwnd=0x37037c wparam=0x9010329 lparam=0x0 result=0x1
PictureBox - msg=0xe (WM_GETTEXTLENGTH) hwnd=0x37037c wparam=0x0 lparam=0x0 result=0x0
PictureBox - msg=0xd (WM_GETTEXT) hwnd=0x37037c wparam=0x1 lparam=0x342ede8 result=0x0
PictureBox - msg=0xe (WM_GETTEXTLENGTH) hwnd=0x37037c wparam=0x0 lparam=0x0 result=0x0
PictureBox - msg=0xd (WM_GETTEXT) hwnd=0x37037c wparam=0x1 lparam=0x342ede8 result=0x0
PictureBox - msg=0xf (WM_PAINT) hwnd=0x37037c wparam=0x0 lparam=0x0 result=0x0
Using the BackgroundImage property these are the messages received after the first picturebox Paint message is received. The last 6 messages just keep repeating until the app is closed.
PictureBox - msg=0xf (WM_PAINT) hwnd=0x38037c wparam=0x0 lparam=0x0 result=0x0
PictureBox - msg=0x14 (WM_ERASEBKGND) hwnd=0x38037c wparam=0x9010329 lparam=0x0 result=0x1
PictureBox - msg=0xe (WM_GETTEXTLENGTH) hwnd=0x38037c wparam=0x0 lparam=0x0 result=0x0
PictureBox - msg=0xd (WM_GETTEXT) hwnd=0x38037c wparam=0x1 lparam=0x3430160 result=0x0
PictureBox - msg=0xe (WM_GETTEXTLENGTH) hwnd=0x38037c wparam=0x0 lparam=0x0 result=0x0
PictureBox - msg=0xd (WM_GETTEXT) hwnd=0x38037c wparam=0x1 lparam=0x3430160 result=0x0
PictureBox - msg=0xf (WM_PAINT) hwnd=0x38037c wparam=0x0 lparam=0x0 result=0x0
PictureBox - msg=0x14 (WM_ERASEBKGND) hwnd=0x38037c wparam=0x9010329 lparam=0x0 result=0x1
PictureBox - msg=0xe (WM_GETTEXTLENGTH) hwnd=0x38037c wparam=0x0 lparam=0x0 result=0x0
PictureBox - msg=0xd (WM_GETTEXT) hwnd=0x38037c wparam=0x1 lparam=0x3430160 result=0x0
PictureBox - msg=0xe (WM_GETTEXTLENGTH) hwnd=0x38037c wparam=0x0 lparam=0x0 result=0x0
PictureBox - msg=0xd (WM_GETTEXT) hwnd=0x38037c wparam=0x1 lparam=0x3430160 result=0x0
So that made me wonder how they differed in the BackGroundImage and Image properties of the PictureBox class when being painted. I looked at the .Net source code for the picturebox class HERE
and found that the PictureBox class is inherited from the Control base class and the Image property is a special property added to the picturebox class and is handled in its OnPaint event. The BackgroundImage is a property of the Control base class that
the picturebox class inherits from. So, that is handled in the base class somehow.
I looked at the Control class code but, it is so much different than what i am use to looking at that i could not really follow what it was doing. So, in the end i still don`t have an answer but, i can only guess that setting the BackgroundImage
inside the Paint event of the form is somehow stopping the Form from receiving the 6 messages shown in the first set of messages shown which is causing it to never finish painting itself.
Maybe Crazypennie or someone with a deeper knowledge into the "behind the scenes" workings of it can say what the difference is. I figured that changing the backgroundimage was causing the form to receive a new paint message and was going
into an infinite loop but, according to the messages i was getting after the picturebox`s 1st paint message, the form never receives another message.
I know this probably won`t help but, if you want to create a new backgroundimage for the picturebox and modify it each time the form is painted you could just assign the picturebox a new bitmap at Load and then use the graphics object of the PictureBox.BackgroundImage
to redraw it in the paint event instead of creating a new bitmap for it each time the form is painted.
Public Class Form1
Private bmp As New Bitmap(400, 400)
Private Sub Form6_Load(ByVal sender As Object, ByVal e As EventArgs) Handles MyBase.Load
Me.DoubleBuffered = True
PictureBox1.BackgroundImage = bmp
End Sub
Private Sub Form1_Paint(ByVal sender As Object, ByVal e As PaintEventArgs) Handles Me.Paint
Using g As Graphics = Graphics.FromImage(PictureBox1.BackgroundImage)
g.Clear(Color.Red)
End Using
End Sub
End Class
Or i guess just use the Image property instead. 8)
If you say it can`t be done then i`ll try it

Drag and Drop and Image Size

I need to be able to drag and drop images but I need them to be a certain size when I drag them out of an Aperture project. For various reasons, I don't want to use the export function. Only drag and drop will be efficient for the workflow that I"m planning. Problem is, the pixel dimension is not wide enough when I test it by pulling an image on to the desktop.
My ultimate goal is drag them, sized and ready to go, and drop them onto a web browser upload page. I don't want to fumble with the extra steps of exporting them to another folder on the desktop and then upload the images from that folder to the browser.
So does anybody know how or if it's possible to control the drag and drop SIZE /DIMENSION of an image?

The drag and drop size is determined by your preview settings. What actually gets "dragged & dropped" is the preview, not the master file. You can control the quality and size of the preview in the Aperture preferences.

The latest Firefox version won't expand to make text and images more visible on my 32" screen, although I have tried to adjust the advanced Windows appearance settings in the same way that has worked in previous versions of Firefox.

Normally I have had to go to Control Panel; Appearances and Themes; Display; Settings; Advanced; Custom; and then I adjust the Customize Setting to 155% (149 dpi). I have hit on this setting through trial and error; larger and icons like the cursor get big and fuzzy. Smaller than 155% and text and images are tiny on the 32" wide screen. This time that procedure doesn't seem to work. The text and images remain too small regardless of setting, although the cursor icon gets big. I can manually zoom the pages, but that is clumsy and has to be redone. Does anyone know of an easy setting fix? I am not too smart about this stuff--mostly trial and error, but I do want to be able to enjoy my wide screen. Thanks!

Normally I have had to go to Control Panel; Appearances and Themes; Display; Settings; Advanced; Custom; and then I adjust the Customize Setting to 155% (149 dpi). I have hit on this setting through trial and error; larger and icons like the cursor get big and fuzzy. Smaller than 155% and text and images are tiny on the 32" wide screen. This time that procedure doesn't seem to work. The text and images remain too small regardless of setting, although the cursor icon gets big. I can manually zoom the pages, but that is clumsy and has to be redone. Does anyone know of an easy setting fix? I am not too smart about this stuff--mostly trial and error, but I do want to be able to enjoy my wide screen. Thanks!

HT3669 My Epson Perfection 1200 scanner functions as a flatbed scanner but when I try to scan transparencies the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimet

Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in Image Capture but the scanner bar will not complete the overview scan & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
Do I have to buy a new scanner? It seems so close to working correctly.
I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
Thanks

I have same issue - have you solved this yet?

Folders and images change when hard drive disconnected

I have no problem importing images. From CD's, when the CD is removed the file folder and images stay there with reference to the original location.
However, I have several hard drives and when I import files and folders from one of them and then disconnect it, Lightroom renames all the folders and changes the images--What is causing this?????

Yes, the images stay on the external drive as I don't move them upon import. I have 5 external Hard Drives and my problem is with the two larger ones, both Firewire 800 if that matters. In any case, the files imported from the non 800 drives do not have any problems. They are noted as not being on-line when I disconnect the drive, but thumbnails, location and file naming are all the same. With the 800 drives, the images corrupt AND change name. A few will still show a path to the original, but the folder they are in has nothing to do with where they came from.

Shortcuts for Batch and Image Processor in Bridge CS6

I use Batch and Image Processor all the time, and I'd like to use a shortcut.
Can you tell me if there is a shortcut or how I can program one?
I set up shortcuts for those two commands in Photoshop, but they don't work in Bridge.
I remember from the time I started with Photoshop and had Deke McClelland's book with his set of shortcuts. There was a shortcut that worked with image processor, but it was just a set you did install and no explanation. When I moved to a different computer and a newer version of Photoshop, these keys got lost.
Is there any way to automate Batch and Image Processor?

There is no way to economically batch process in Bridge without having to go thorough sub-menus.
I'm sorry you can't get it to work, but on my system it works flawless.
Testing a bit more it seems you don't need to use a unique shortcut at all. I also tried to use the shortcut for Batch I created in PS itself to get the Batch window to front for running actions on open files. For me that is [control + Cmd + B] but feel free to find an other one.
When I discovered you don't need the unique shortcut at all I used the same shortcut for Bridge CC. . Also created [Control + Cmd + i] for the Image processor.
Both started without problems.
To extend I also created both same shortcuts for Bridge CS6. This also was working correctly, off course, having only PS CC open using the shortcut in Bridge CS6 it auto started PS CS6.
So can you specify a bit more about what OS you are using on what computer (I have OSX 10.8.4 on a MacPro 2012)
Some screenshots to show the shortcuts in System prefs and how the show in the Bridge Submenus:

Control of LR and image location

Similar Messages

Maybe you are looking for