Control panel does NOT come up when I swipe up in ios7
the control panel does not come up when I sipe up on the home screen [ or any screen ]
When you start the pre-swipe basically start the swipe with your finger from the lower left-hand corner of the hard case then upwards... not touching the actual screen first (make sure you start the swipe upwards from the actual hard plastic of the case before touching the edge of the screen)
then move your finger upwards onto the screen. Now I can pretty much do it every single time when starting from the bottom left-hand side. Let me know if this works for everybody else.
Still looking forward to Apple adding a couple of millimeters to the actual swipe area (higher) on the next update, This will make it much easier for everybody with cases to access the control panel. Cheers
Similar Messages
-
Officejet J3680 Control Panel does not respond to buttons, just make "beep sound"
Hi everybody, thanks for reading.
The problem is that my (brand new) J3680 control panel does not work until I press all the buttons, yes its weird.
Note #1: The printer works perfect when used through the computer (I am Linux user).
Note #2: Once I have pressed all the buttons at control panel the control panel (kind of) works.
Heres how this happens:
I plug the power cord
Now, the printers start and not even the Power button works, so I cant turn it off, each time I press any button it just do a “beep sound” and the LCD screen keeps the same
The LCD shows this:
0 Speed Dial
<One-Touch 1>
Now I have figured out what the LCD screen initialization means:
0: Thats the times I have pressed the “Speed Dial” button
Speed Dial: Thats the button I have to press to make the Control Panel works
<One-Touch 1>: This is the next button I have to press after the “Speed Dial” has been pressed
The printer then makes me press all the buttons (...)
I think this is kind of some “Control Panel button calibration", because the LCD respond perfect when I press the button the printer ask
The other problem is that I don't know how to finish this calibration or whatever this is, because I reach a point where I cant find the button it ask
The LCD ends showing:
1 Color Start
<Hidden 1+Black>
Where “1 Color Start” was the last button it asked me to press, and the <Hidden 1+Black> is the next one combination.
Note that “Hidden 1” is not “1” not “Speed Dial 1”, I have just tried that combinations, but does not work.
Please help I have to do this each time I turn on the printer to make the control panel work. Thanks a lot.
Message Edited by NxGTR on 08-14-2009 07:15 AMNao Consigo estalar impressoura HP Officejet J3680 Faz horas que estu tentando estalar nao sei se esuporte ou provedor gostaria muito de ajuda para italar. obrigado Rui
-
Beware: icloud control panel DOES NOT WORK for icloud email
Opposing evidence is welcome. Please comment.
After dozens of hours, emails and chat sessions with both MS and Apple tech support (the latter escalated as high as it could go - "after this we have to refer you to engineering"), I was finally told by Apple Senior Advisor Ciara Ferguson that icloud control panel does not properly sync icloud mail with Outlook 365 (Outlook 2013). After several months of working on dual systems I discovered that many (but not all) changes to folder names and filing of emails in various folders made in Outlook were not reflected on icloud and vice versa. Ms. Ferguson has stated that icloud control panel "works better with calendar and contacts." Obviously, this non-committal statement is grossly insufficient. It either works or it doesn't. It doesn't.
Allegedly, icloud control panel does work to sync other email (the example of an outlook.com email address was given) into apple devices. This doesn't sound right to me either, since one can just add any POP or IMAP or Exchange account into a Mac device, so why would one need icloud control panel to interface?
I remain stymied as to the actual purpose of icloud control panel, despite asking exactly that question of Ms. Ferguson on several occasions. The Apple literature and its own setup screens suggest that it will sync email, contacts, calendar and notes with MS Outlook, but as to email, that is apparently untrue.I don't think so. I'd like to sync photostream from two iPhones with distinct Apple IDs on our PCs and I don't see a way to do it. It synced my wife's iPhone while she was logged in to iCloud control panel but not mine until I logged in (and disconnected her photostream PC syncing).
-
My icloud control panel does not enable the Photos check box. Cannot view photos on PC that are taken with iphone and ipad.
Hi Randers - thank you for the advice. I signed out of the account on all devices, however when I try to go into iCloud on the Mac to re-input my account details, I'm presented with the following error message:
'Could not load iCloud preference pane'. Is there something additional I'm meant to do to be able to load an iCloud account on the Mac? -
My control panel does not have flashlight,calculator or portrait lock
Control panel does not have flashlight,calculator or portrait lock
There is no flashlight since the iPad has no flash with it's camera. There is no calculator icon since the native calculator app available with the iPhone version is not included with the iPad's version of iOS 7. The rotation lock depends on Settings/General/Use side switch to..., setting it to mute audio will put the lock screen button on Control Panel. Setting it to lock screen rotation will change the button in Control Panel to a Mute button.
-
Hi, I am trying to delete some aps, but the delete "x" does not come up when the ap is pressed. Anyone know how to fix. Also, my ipod is turning off on its own and won't power back on unless I plug it in although it is fully charged.
For the apps:
- You can't delete the apps that came with the iPod
- Go to Settings>General>Restrictions and see if there is the Restrictions set that prevents deleting apps -
Google does not come up when I open Safari? How do I get it back.
Google does not come up when I open Safari. How do I get it back..
Safari>preferences>type "www.google.com" in the "homepage area".
-
Downloaded icloud control panel to Win 7. Everything seems ok until you "apply" synching at the icloud control panel. Then you get an error message that says "icloud control panel did not install properly". Repairing in Windows control panel as suggested does not help. If you do not try to sync Outlook data (2010) then it seems to work just fine.
I was able to finally stop ITunes from crashing after many days of searching n restarting my computer many times.
a) First I went to this site ->http://forums.techarena.in/guides-tutorials/1119812.htm that showed me how to disable DPE. Please make sure that u have good virus...etc.. protection first before doing this. I have Avast Internet Security. RESTART UR COMPUTER..
b) I then uninstall ITunes by following this site ->http://support.apple.com/kb/ht1923 RESTART UR COMPUTER..
c) I then downloaded a beta version of ITunes. I happen to download beta 7 before the final of 10.5 version came out. Installed it. After installing I click on it n it said somewhere along the line of "this ITune ver. expired" I checked in my Programs n Features n notice that QuickTime was installed w that beta version.
d) Go online n download the final version of ITunes ->http://www.apple.com/itunes/download/ ...... After u finish dling install that. After that's done connect your IPod, IPhone...etc... n click on ITunes, it should sync all the way.
I was finally able to sync all thru the steps insteading of it crashing on me midway. Hopefully this will work for you. Good luck !
IPhone4, Gateway Windows Vista 32bit -
Audigy FX Control Panel does not recognize my card
I have Windows 7 Pro, 16gb Ram, Intel i5-2400 processor. I just installed my new Blaster card and software two days ago.
When I click the Taskbar icon for the Audigy FX Control Panel, I get the message "The current selected audio device is disabled, not present, not supported by the application, or has unplugged jack connections".
When the Control Panel does open and I click on Menu and select Audio Device Selection, I get the message "There is no supported audio device available".
When I go to Control Panel>System>Device Manager>Sound, video and game controllers>Sound Blaster Auditgy FX>Properties it shows "This device is working properly."
Today, Windows Update included the following:
Creative - Audio Device - Sound Blaster Audio Controller
Installation date: 12/18/2014 1:17 PM
Installation status: Successful
Update type: Optional
Creative Audio Device software update released in November, 2014
More information:
http://sysdev.microsoft.com/support/default.aspx
Help and Support:
http://support.microsoft.com/select/?target=hub
SB Audigy FX Control Panel still does not recognize my card after this update. Help please.
Screen shots.
soundblaster_error.jpgsoundblaster_audigy_properties.jpgsoundblaster_properties.jpgOriginally Posted by SHS
My question no you mean you I don't understand my answer
HTML Code:
<This sentence makes no sense>
It simple you shouldn't have install those windows update driver
HTML Code:
<How would I know that?>
The simple fix is to uninstall the Sound Blaster software from the Control Panel and then re-install it that should fix the problem.
HTML Code:
<Done. Did not fix the problem>
OK, so you don't understand my original post. I installed the card and software two days ago, 12/16/14. The problem was present at that time. Then today at 1:47pm, I installed the Windows update. The problem persists, that means I still have the problem. The problem exists BEFORE and AFTER Windows update. I did follow your suggestion and uninstall and re-install the Audigy FX software and STILL have the problem. -
Report does not come up when called from Forms
I have installed Oracle 9i database and dveloper suit on my pc. When I run reports from forms, the report does not come up. I have Adobe Acrobat reader 6. The report does get created, I can see it in the cache directory.
It created an error file, I am posting the begining of this file here.
Please help.
Thanking you in advance.
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x65553878
Function name=Java_oracle_reports_engine_EngineImpl_CGetEnv
Library=C:\orahome1\bin\rw90.dll
Current Java thread:
at oracle.reports.engine.EngineImpl.CGetEnv(Native Method)
at oracle.reports.engine.EngineImpl.getEnvs(EngineImpl.java:453)
at oracle.reports.engine.EngineClassPOATie.getEnvs(EngineClassPOATie.java:152)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:205)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)Hi ,
Looks like this is not a Forms side problem or even a Reports Servlet problem
Some guesses.
From the exception
at oracle.reports.engine.EngineImpl.CGetEnv(Native Method)
at oracle.reports.engine.EngineImpl.getEnvs(EngineImpl.java:453)
it looks like engine crashing. Did you see the server GUI up and running ? Server might not have started
Give
rwserver server=<server_name> in command line.
The server GUI should come up and show "ready "
You have multiple Oracle Homes on the same machine. So this could be a PATH problem.
1) Go to ControlPanel -> System - Advanced - Env variables - System Variables
Copy the IDS specific PATH to clipboard
Go to iDS_HOME\bin\ and open a command window. Set only the above PATH here. Start a standalone server
rwserver server=<server_name>
and try
(If this works you could write a batch file later)
2) For trouble shooting purposes use a different server name to start the standalone server.
3) Also look in your registry
HKLM\Software\Oracle\Home<x>\
Here please see whether you have any "very long" environment variable (say more than 256 chars or 512 chars).
This is just a guess.
4) To confirm this is not a Reports servlet problem
give
rwclient report=<report_name> + ..... <server=server_name>
If you get same error, then it is not a servlet problem. It could be that Reports server is crashing
Thanks
Ratheesh
[ All Docs ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf -
When I hook my iphone 4 up to itunes, it does not show up on the left. It will not sync, and the lightning bolt charging indicator on the phone does not come on although it appears to be charging over time because the battery level has increasd.
I am running Mac OS X, up to date as is my iTunes. I tried the steps from the website troubleshooting guide and nothing worked.Additionally, charging through other devices such as my car charger has the same symptoms.
-
Satellite M60 - screen does not come on when i reboot
I have a Toshiba Satellite M60 and the screen does not come when I power down or reboot. It takes about 12 tries before it comes on. When the screen does not come on the computer still boots up ok just no screen.
I have to put it in standby mode if I do not want the hassle of trying to get the screen to come on. Is this a screen or inverter problem?
Any help would be appreciated.Hello Mark
You cannot expect that someone here offer exact diagnostic to your problem. For instance, I can say yes, you need new display. And what now? Do you want to follow my opinion and order new display?
What you really need is professional help. Technicians know how to handle with such cases. Maybe just some cable must be exchanged. I recommend you to contact nearest authorized service provider. Explain them the situation and let them check your notebook. -
Control panel does not show the home page when Newsstand app is open - could this be a bug?
When Newsstand is open and I press the home button twice to access the control panel, the home screen is replaced by the Newsstand app. Is anyone else having this issue? Is there a fix?
Zephuros2000 wrote:
I press the home button twice to access the control panel ...
Pressing the home button twice does not access the control panel ... at any time.
To access the control panel, press the home button once to get to the home screen. Then swipe up from down near the home button to view the control panel.
Pressing the home button twice generally shows you the apps that are running. -
Image display control scrolling does not work properly when zoomed in
I am using a ROI on an image in the image display control. When zooming into the image to fine-adjust the positioning of the ROI, the image scrolling does not work properly. As far as I understand, the image should scroll automatically when the ROI is leaving the visible area. However, the scrolling behaviour seems to depend on the origin of the Labview panel, not the origin of the image display control, which might require to move the ROI way out of the visible area before the scrolling takes place. In other words: the coordinate system of the image display control is shifted with respect to the true visible image area, depending on where you place it on the front panel. As a consequence, when clicking on a ROI which is in the visible area, but is outside of what Labview thinks is the visible area, it might immediately jump to the left border of the image, making the positioning of the ROI really difficult.
Has anyone noticed this behaviour, and what would be a reliable solution to avoid this?
DirkHello,
no, I am not talking about the tools palette. Just place an image control with some image in it on a new VI front panel. Then, use the rectangle from the tools and select a ROI in the image. If you zoom in (using the magnification glass), and then grab the ROI and move it around, the image scroll with the ROI. So far, so good. If you now place the image control elsewhere on the panel, or add new control above it, resize the panel, etc. , this scrolling when moving the ROI will not work correctly if the origin (0,0) of the panel is far away from the image control.
I have attached a VI for simplicity (although there is hardly any code in it).
If you make a ROI and try to move it down, you will notice that scrolling starts if you move the mouse out to about 10cms below the image (depens on your screen, of course). After that, if you click on the ROI, the scroll bars and ROI might jump up to the upper end of the image. Imagine how annoying this is if you try to finely adjust the ROI position.
I think it is a bug in the implementation of the image display control.
Thanks,
Dirk
Attachments:
scrolling.vi 818 KB -
Windows Update from COntrol Panel does not work??
Hello,
regardless if it is common way to do so or not: Does anyone have experience with the "Windows Update" functions in WE8S?
I tried them upon a customers request, and I've seen that I could not get it to complete successfully when choosing the option in
Control Panel. It either hanged during "Downloading..." or at the "Preparing to install..." screen - I waited for many hours. But when I using the "Windows Update"
app from the start screen, updates were installed without any problems (OK, 1 has failed, but the process has completed). Of course, both methods have different look, maybe it is not the
same...
As per Sean Limings' book it is no good idea to update systems in the field this way - shall I remove the functions from the system? What are you doing?
Thanks,
Willi K.Maybe it was because of the number of updates (in my case there were 85 updates pending). After I succeeded installing via the "Windows Update" app from "Start Menu", there where two more updates, and update now worked when called from
control panel (at least one of them, KB2973201 still stolidly fails to install).
Maybe you are looking for
-
How can I pass field value betwen view in ICWC?
Hi experts, I am new to this BSP programming. I have some requirements to modify standard ICWC in CRM 5.0 Hope can get some advices and helps here. I have added a new field called <status> to context note SEARCHCUSTOMER in BupaSearchB2B view and also
-
I cannot print a pdf-file normally, parts are good (good black printed) and parts are very light
Some parts of my page i can read some parts i cannot, that is, the text is much to light. Mostly it happens with PDF-files and email and internet, i use the hp laserjet P1006
-
Is there such a thing with Iphoto 6? I have over 25,000 photos in my library, but every time I upload some new shots, I've been dragging the entire Pictures folder (from the finder) to my EHD, and it takes forever. Is there a better way to do this? T
-
Just installed 12.0.1 update... software update still says 12.0.1 is available!
This was happening to me in versions of itunes 11 as well. 1. I installed the latest version (12.0.1) available from Apple Software Update, then reboot if needed. 2. Open iTunes and "check for updates" - I have the latest version (12.0.1) 3. Open sof
-
Hi, Noticed a problem with the following page: http://otn.oracle.com/tech/java/oc4j/1003/release_notes/release-notes-1003-preview.html The URL to the Web Services discussion forum incorrectly includes the trailing period of the sentence. regards Geor