Control panel like this

Hello,
Does anyone know how to create a menu like the user control
panel found here:
http://www.ff0000.com/universe/
I'm having difficulty figuring out how the animations were
done for rollover, and rollout and have the buttons still work.
any help would be greatly appreciated.

STOP SHOUTING!  Or at the very least, get the CAPS lock key fixed.
Remove iTunes.
Download and install the current version of iTunes from http://www.apple.com/itunes/download

Similar Messages

  • [SOLVED]How to get a kicker panel like this?

    I want my Arch/Chakra KDE to have a transparent kicker panel like http://pclinuxos.com/wp-content/uploads … minime.png I tried various permutation and combinations of existing themes i.e Air, Air Netbooks, Oxygen. Tried few themes like Glaze etc but none of them work. I don't want a complete transparent panel like in Bare Naked Theme(which does not work/come in KDE 4.4.2 BTW) but like shown in the above image with slight white hue but not more. Perfect as in the image. Does anyone know how to get it?
    Last edited by chakra-user (2010-04-23 06:14:28)

    toxygen wrote:
    look for the naked plasma theme, or the bare naked theme (this is for kde 4.x).  you can do it through settings ->aapearance -> style -> workspace and change the theme there (or get new theme and search for naked).
    or you can go to http://kde-look.org and search there for plasma theme
    Like I mentioned above, * Naked theme is not available for 4.4.2 becoz I could not download it via the built in kde theme manager maybe it is in compatible. Is there a way to remove those ugly round shapes from AIR theme. modify .svg of air how?

  • LYNC 2013 control panel error: this page cannot be displayed

    Dear sir,
    Now i am suffering with the lync 2013 control panel problem, i cannot open it and got the error "This page can't be displayed" as below screenshot shows,
    I've tried some ways, but still same problem
    1. Reflush the dns, checked the A record and SRV record of the FE are normally.
    2. checked the IIS and also cannot find any problem.
    3, reboot the FE server/IIS, and AD.
    4. i can open the console page normally via web :https://localhost/cscp
    5. i can ping the FE server domain name and return the right IP info.

    Hi TECH-Tommy,
    The certificate is under “Personal” store.
    In addition, can you open the page via
    https://admin.domain.com ?
    Also please try to clear IE cache and treat the FQDNs for admin, pool or FE server name as trusted zone.
    Best regards,
    Eric
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • A control panel like the one on the MoviePlayer - iPhone

    Does anyone have an idea/or example on how to create a control panel on iPhone ( with backward,stop,forward buttons) similar to the one the moviePlayer uses?
    Thanks

    You mean the one with the green icon with a white chat bubble? If so, that is the messaging app for SMS or MMS. It doesn't exist on the iPad as the iPad is not a phone and therefore does not have SMS/MMS capability (though there are apps you can use to fake it).

  • There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel

    I just installed Window 7 professional in place of Windows 7 Ultimate RC to which I subscribed. I was not pleased to do a clean install as opposed to an upgrade and was not informed about it.
    When I reinstalled Office 2007, my outlook does not work, although exchange on the web works. I get the following error message:
    There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel 

    Louis,
    This issue may occur if the Outlook registry key is corrupted. When other programs try to use the Outlook Simple MAPI interface, they cannot retrieve the required information from the registry.
    You must first remove the corrupted Outlook registry key, and then perform a Detect and Repair operation to have Outlook rebuild the key. To do this, follow these steps:
    Click Start, and then click Run.
    In the Open box, type regedit, and then press ENTER.
    In Registry Editor, locate the following subkey in the registry: HKEY_LOCAL_MACHINE\Software\Clients\Mail\Microsoft Outlook
    Select the subkey, and then press DELETE.
    Click Yes.
    Quit Registry Editor.
    Start Outlook.
    On the Help menu, click Office Diagnostics.
    Follow the instructions on the screen to complete the repair.
    Important: Above section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
    322756  (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows.
    Hope above information helps.
    Pooja Katiyar

  • Despite having the File Associations in both Windows Control Panel and Firefox Options set to Windows Media Player for *.mwv files Firefox tries to open them with Foxit pdf Reader, which bombs out - what now?

    Making this entry from my Linux computer which handles the situation correctly.The real situation involves only a Toshiba laptop running Windows XP.

    I used this link for tiff http://www.nrl.navy.mil/content.php?P=IMAGES
    QT was opening the tiff files. When going into the QT control panel Browser>Mime settings>Images-Still image files I was able to uncheck tiff, which held. I was also able to uncheck all the file types under File Types tab(Images-Still image files) in the QT control panel. However the preference would not hold. Went into Start>Set Program Access and Defaults that also was of no help.
    The only way I was able to get QT to release the tiff's from the website I posted was to go into the Folder Options control panel for File Types and change the tif & tiff from QT picture viewer to windows picture and fax viewer.
    So not sure why the QT control panel will not respond, there are other file types in the Folder options control panel on this computer other than tiff's that are still associated to QT, but didn't try changing them, perhaps that needs to be done?
    Good post I didn't realize this before reading your post, if I come across anything further I'll post back.

  • Cannot login from Windows iCloud control panel, but that not all...

    I set up my Apple Id and downloaded the Windows iCloud control panel, but when I try to sign in from my PCI get this message: "You can't sign in because of a server error." But when I check the status of icloud everything is operational. But if I go to the icloud page directly, I can sign in normally. The reason this is an issue is that I cannot setup icloud on my computer properly and with all of the options I want without signing in from the icloud control panel. This really bites, and any help would be appreciated immensly.
    Thanks, Scott

    I am having the same problem. I really need a solution. My Admin is flying blind without being able to see my calendars.

  • Create an ODBC using java without using the windows controll panel

    Hi, does anyone know if its possible to set up an ODBC connection to a MySQL database using a java program, or do these things always have to be made using windows from the control panel?
    This is so we can make our own install programs.
    Thanks, Graham.

    Heres the code Im using. I have a connection made in the ODBC control panel. SO do I need the connection I made....heres the code.
    try{
         Class.forName("com.mysql.jdbc.Driver").newInstance();
    } catch (InstantiationException ie){
    } catch (ClassNotFoundException cnf){
    } catch (IllegalAccessException iae){
    //GET CONNECTED//
    try {
         System.out.println("Connecting to database LMS001db");
         conn = DriverManager.getConnection("jdbc:mysql://localHost/lms001db");
    } catch (SQLException sqle){
    ....isnt the bit where it says conn = DriverManager.getConnection("jdbc:mysql://localHost/lms001db");
    connecting to a connection Ive made earlier from within control panel? or is it connecting to the dayabase directly.

  • Can't disable voiceover even it's deactivated in Accessibility Control Panel

    Hi,
    I've recently purchased a headphones, so every time an error message appears in Yosemite this female voice is punishing my ears. I've tried to disable VoiceOver in Accessibility Control Panel, but this voice keeps speaking. So I guess that configuration is in another place. How can I disable this?
    Googled it (sorry, search it in internet finder) but every body says the same about this tick in Accessibility Panel.
    Kind Regards, and thanks for your time. Manel.

    If I understand you correctly, you ought to reinstall. At this point, even if you're able to resurrect this installation, it might be severely unstable. Mostly because of my proclivity for messing around with settings until I screw something up, I have a tremendous amount of experience with the recovery console, and my success rate is not inspiring. If you have data you need on the drive, your best course of action is to reinstall to a different boot drive, and once you’re able to boot, archive the files you want from the corrupted installation. Then you can wax both drives, restore the data and get everything back the way you want it. Getting your data back from the recovery console is basically a lost cause since it doesn't support wildcards (as in, you'd have to copy every freaking file one at a time).
    I re-read the above paragraph, and it's not the clearest thing I've ever written, so if you need clarification on anything, let me know.

  • RAM Doubler broken by OS 9 Startup Disk control panel

    After setting up a PowerBook G3 with OS 9.2.2, thought I'd install RAM Doubler since it has only 128MB of RAM (and just for nostalgia's sake). Seems to work fine (of course, had to install the two OS 9 RD updates), but then I started from an external disk to run Disk Warrior on it, and when I returned to the internal disk RAM Doubler was disabled "because it had been moved". I remember RD had a piracy-protection system to prevent copying; apparently this was triggered somehow.
    Experimentation determined that the trigger was the Startup Disk control panel: if this control panel is even opened, without changing any settings, RD is immediately disabled. Though the alert suggests "Restart your computer to run more applications," this doesn't work; RD must be reinstalled at this point.
    I assume this is a bug that appeared in Mac OS 9 sometime after Connectix went out of business, so was never addressed/fixed. (I haven't tried this with 9.0.x or 9.1.) It can be avoided by not using the Startup Disk control panel, instead using the C key to start up from a CD, or cmd-opt-shift-delete to force startup from an external disk. Either of these expedients does not affect RD, but the Startup Disk control panel kills it.
    Anyone else run into this? Any thoughts, solutions?

    Hi, HandyMac -
    There have been a few posts over the years indicating that RamDoubler can't quite get to full compatibility with OS 9. This may have to do with some applications in OS 9 having the ability to use dynamic memory allocation, a function probably not expected by RamDoubler.
    As Baby Boomer suggests, leaving RamDoubler off and using the OS's native Virtual Memory function should prove to be more stable.
    Best is to increase the physical RAM in the machine. I have 896MB RAM in this G4, and am able to leave Virtual Memory off.

  • As soon as i installed icloud control panel on my window pc, my contacts were merged together, ie. 2 of my contacts now became under one contact like "contact A" and "contact B" the result now "contact A contact B", please how to solve this as i have more

    hi
    as soon as i installed icloud control panel on my window pc ( 7 Ultimate ), my contacts were merged together, ie. 2 of my contacts now became under one contact like "contact A" and "contact B" the result now "contact A contact B", please how to solve this as i have more 800 contacts in my address book.

    any help ?????

  • Every time I update or repair in the control panel it comes up with a error message like, this file does not have a program associated with it for performing this action, please install a program if it is installed create an association to the default pro

    EVERYTIME I UPDATE SOFTWARE OR GO INTO THE CONTROL PANEL TO ITUNES TO REPAIR OR CHANGE IT GIVES ME AN ERROR MESSAGE
    THIS FILE DOES NOT HAVE A PROGRAM ASSOCIATED WITH IT FOR PERFORMING THIS ACTION. PLEASE INSTALL A PROGRAM, IF IT IS INSTALLED CREATE AN ASSOCIATION TO THE DEFAULT PROGRAMS CONTROL PANEL

    STOP SHOUTING!  Or at the very least, get the CAPS lock key fixed.
    Remove iTunes.
    Download and install the current version of iTunes from http://www.apple.com/itunes/download

  • I have photo sharing turned on, on both my Iphone 5 an my PC Icloud control panel but yet my pictures will not show up on my PC, how do I fix this?

    I have photo sharing turned on, on both my Iphone and my PC icloud control panel, however my pictures will not show up on my PC how can i fix this?
    I had a previous problem with this with my old iphone 4 and did not realize there was an issue until it was stolen. I would like to get this straightened out just in case anything ever happens with this phone.
    Thank you in advance for any help.

    Hey LBert7,
    I would try the recommended steps in the following article:
    iCloud: My Photo Stream troubleshooting
    http://support.apple.com/kb/TS3989
    Welcome to Apple Support Communities!
    Take care,
    Delgadoh

  • TS4204 When I attempt to download the icloud control panel, I receive a message that implies, "this prograam is not normally downloaded and may damage your computer".  What do I do?

    When i attempt to download the icloud control panel, I receive a message that states, "this program is not normally downloaded andmay damage yourcomputer".  What shouldI do?
    cbherb

    Well thanks for the star but I would still like to see the exact error?

  • Uninstall SmartWebPrinting when the control panel offers nothing to remove this program

    I have an HP1600 printer. I use Firefox as my browser. Every time I try to open a file, or my browser, the SmartWebPrinting tries to install itself. It is not shown in the "Add or Remove Programs" list. Originally, it was in the list but didn't have the button to click on for removal. I believe my son may have deleted the icon from my list of programs. How can I remove this completetly? I rearely print directly from the internet and it is a nusance when it tries to install.

    Kellers,
    Commentary
    If it is related, then I suspect this is the older version of the program.
    If it is not showing up in Programs and Features, and assuming it should show up, then it may be because is it indeed disabled due to the incompatibility issues -- that part is good.  The missing bits are bad, obviously.
    Do this first:
    Create a Restore Point:   Create a Restore Point – Win7 OR  Create a restore point Win8
    Ideas
    Perhaps there is a Folder in the system for your "web print"-- you might be able to find it with a search of the C:\Programs Files or C:\Programs Files (x86) folders. 
    For example the newer Smart Print is located in C:\Program Files (x86)\Hewlett-Packard
    You could try moving the folder out of the way.  I have doubts about this working because I cannot see what is going on elsewhere on your system.  I hesitate to suggest you delete the folder for the same reasons  -- I might do so under some circumstances, but telling someone who is in trouble to do something like that (who does not have an Image of their system on hand) is not something I would do.
    OR...
    It occurs to me that you MIGHT be able to fix the problem by updating to the the new version of the program.   I realise you do not WANT the program at all; but a this point if you can update to a working version of the program and THAT version shows up on Control Panel > icon view > Programs and Features > Smart Print >> THEN you could remove the working version.  Poof!
    OR
    You could try this if you are willing to reload your Browser from scratch.
    For Example
    Back up your bookmarks
    Make a list of your Add-ons that you want to keep.
    If you use a fingerprint reader, back up your Webcards.  If you don't know what this means, you don't use a fingerprinter.
    If you use the Browser website password manager, make sure you know your passwords...
    Download a copy of your Browser.
    Take a deep breadth.
    Delete your browser from Programs and Features.
    Reboot your system.
    Install the browser from the download.
    Open the Browser.
    Manually set up your Add-ons and Plugins.
    Import your Bookmarks and, if using, your Webcard backup.
    Set up your other Options
    I wrote this on the fly -- your browser setup might differ from the one shown...
    Firefox Sync:  I am not sure, but at this point, you could also reset up Sync for Firefox -- I don't use Sync so I am not aware the extent of what it would do.  Assuming you don't have this old webprint issue elsewhere, I suspect you would not inherit from another device or backup.
    Click the Kudos Thumbs-Up to show you appreciate the help.
    Click Accept as Solution when the Answer provides a Fix or Workaround!
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Kind Regards,
    Dragon-Fur

Maybe you are looking for