Control Panel on an 800x600 screen

I have to do some InDesign CS6 demos using a projector. The projector can only handle 800x600 resolution. The biggest challenge here is to demo the control panel in its eternity and I don't want to customise the panel every 5 seconds to display another aspect as this is disruptive to the workflow.
Is there any way to display the Control panel in two rows or perhaps a way to scroll through the available items?
I know that there are shortcuts for most of the items in the control panel and there are panels that do the same work, but when you need to demo these aspects from a control panel point of view, then this is very challenging.
So this is what I see on my 800x600 resolution:
Compared to what the delegates see on their screens:
As you can see, I only have half the control panel items available.
Any thoughts or suggestions?
Thanks in advanced.

Peter Spier wrote:
There's nothing you can do in ID to change this.
I wouldn't say "nothing", since you can make the top bar floating. With it being a Window, you could shift it from left to right - though this will be annoying - in order to access the rest of the elements.

Similar Messages

Notifications and control panel do not work on either the app screen or home screen

On my home screen and in apps, I can not swipe up or down to release the notifications or control panel. It has worked earlier today, however not any more.
I can, however, access them in the lock screen, andin settings, they are allows to open in apps. It should always allow me to access them in the home screen though, so I do not know what has happened.
What do I have to do to access the control panel in the home screen, and why is it like this?

Do you have a screen protector or case that would interfere with swiping?
If so remove them as a test.
Otherwise:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How do I change icons to text in the Control Panel?

Hello,
I'm trying to follow along with a video at Lynda.com on AI CS6.
However, in the video, Deke McClelland is showing the TEXT "Align" on the top Control Panel.
On my screen, it's not a text, but a small icon. When I click it, I don't get the same options he does.
I've searched and searched and can't find how to get MY screen to look like his. I have even tried to "Reset Essentials" (the workspace he's using) and still no luck.
Please help.
Thank you.

The align panel in the control bar is dependent upon the setting. For example, if you have one object selected and align is set to "Align to Selection" you will only see an icon. However, click the icon and change it to "Align to Artbaord" and you should see all the align options.
I think I may have had the order reversed a bit previously. On the smallest screens only a text link is shown. My guess would be the lynda videos are often shot with a laptop and a small screen.
As far as I'm aware, you can not change whether the Control Bar shows icons, or text links short of reducing your monitor resolution.

"Hide specified Control Panel items" no effect on 2012 R2?

That is from gpresult /h from user that is logged in viewing the control panel.
Also weird behavior. When I type "control panel" from the start screen I get no results. Only way I can open control panel is from PC Settings...?

Hi Allister,
>>That is from gpresult /h from user that is logged in viewing the control panel.
Before going further, what's the operating system of our domain controller?
Besides, Is the server 2012 R2 a domain controller? If not, we can try to temporarily un-configure the setting in the domain GPO, and then try to configure the setting in the local GPO on the server 2012 R2 with its local group policy editor (gpedit.msc) to
check if the policy setting can be applied successfully. If the policy setting can be applied successfully locally, we can copy the admx files (%systemroot%\PolicyDefinitions) on Server 2012R2 to central store (%systemroot%\sysvol\domain\policies\PolicyDefinitions),
install group policy management tool on the server 2012r2, and then configure the setting from the server.
In addition, the following thread focused on similar issue and can be work taking a look.
2012 R2 - Show only specified Control Panel items not working
https://social.technet.microsoft.com/Forums/en-US/65133b66-6782-4ed2-8642-cdca2b296d69/2012-r2-show-only-specified-control-panel-items-not-working?forum=winserverGP
Best regards,
Frank Shen

W520 and hooking to TV - No DisplayPorts show connected in NVidia Control Panel

I had hoped the video would go well, leaving me to just have to worry about the audio issues when trying to drive my TV from the W520. I have the latest BIOS and NVidia Optimus drivers from the Lenovo site.
When connecting the TV to the laptop DisplayPort I tried to bring up the NVidia Control Panel (and also Desktop->Screen Resolution) to see if I could see the second monitor. The 3 DisplayPorts show no connection in the NVidia Control panel. Is this indicative of the cable maybe being bad (Should I at least see one connected even without a cable)?
Other thoughts? Thanks,
Eric

hey ericvn,
have you updated the drivers for your nvidia yet ? The current version right now is 8.17.12.6871 and if yours isn't this version; do update it.
if yours is this version, try uninstalling and reinstalling and at the same time do test the cable on a different unit.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

HT5055 Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works

Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works can you help

Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!

Control Panel LCD Screen is too dark.

Is there a way to brighten the LCD screen on the control panel? Thanks.
This question was solved.
View Solution.

Hi @LeftyMike ,
I see that you would like to be able to lighten the LCD screen on the printer. I will do my best to assist you with this issue.
I have checked through the menu structure and wasn't able to find anything for the brightness for the display.
Try tilting the control panel up for viewing, to see if the light shows up.
Touch a button on the display, just to make sure the printer isn't gone into sleep mode.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
If the issue persists, then I would recommend to call HP Tech Support for further assistance to see what other options are available for you at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. Contact HP Worldwide.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the

PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the apps back?

adobeamatuer
Thanks for the reply.
Although the security of Windows XP SP3 32 bit is compromised by Microsoft no longer supporting XP, if Windows XP was restored as claimed, you should still be able to install/uninstall Premiere Elements versions of it that you did before the Microsoft support removal.
I think a revisit to the Geeks would be in order. It may be that they could not restore Windows XP because of the Microsoft non support. I would take along the Premiere Elements installation disks so that you do not leave there without actually seeing Premiere Elements (or a non Adobe program) running on your restored Windows XP. What was the other software that you tried to use that did not work?
Please update us on your progress when you get a chance.
Best wishes
Thanks.
ATR
Add On...spelling correct 12 03 2014.

Hide Control panel in full screen mode

Today I installed Quicktime Pro on an XP Pro platform (IBM Thinkpad) fully updated. I ran a quicktime ".mov" movie. I was unable to hide the control panel, despite selecting "hide after 2 seconds" in Edit\Preferences\Quicktime Player\. I then uninstalled and reinstalled Quicktime Pro. No change. No one at Apple can help me. This is for my mother's memorial service and I am very frustrated. Any ideas?

Perhaps I was not clear. The control panel is what I am calling the on screen panel that controls the Play, Stop, Pause, Reverse, Forward functions of Quicktime. That panel does not automatically hide when it is set in Edit/Preferences to hide after some period of time (seconds). Further, not all the hot keys function. I deinstalled and reinstalled. No remedy. Bottom line - no one at Apple could help and I am disappointed and hoping Apple will refund my money. My PC OS is fully updated.

I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160 when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt

I just bought a Dell Precision M3800 laptop - screen res 3840 x 2160 when I open photoshop the task bar and tools and layers etc are in 4pts size   I changed my % in my image in my control panel and if I go to open file the drop down boxes are in good pt sizes how do I make the layers and tool bars bigger? Please help@

Windows will scale applications display or windows will not scale application display depending on how the application is coded. Photoshop is coded in a way that its display is not scaled by windows. Photoshop knows about your displays high pixel count not its resolution so it uses its pixels however it does not scale its UI to make it usable on your display. Other application let Windows scale their display output.   For example Microsoft default for is Surface Pro 3, 216 ppi display is to scale applications display up 150% so the surface pro 3 display which has 2160x1440 pixels a 216 ppi resolution look like at display with the user is using with 1440x960 pixels. The Application works like the display is 1440x960 and Windows scale those pixels to the displays using the displays 2160x1440 pixels the effectively changing it resolution to 144ppi rather than the actual 216ppi.
The reg update and external manifest file effectively tells photoshop its working on such a size display display some number of pixel wide and some number photoshop uses that as the display size in turn Windows scale those pixels to use the displays 2160x1440 pixels efector lowing its 216ppi resolution. Photoshop CC 2014 2X UI would be like using windows 200% option applications would be shown the are working on a display 1080x720 instead of the Surface Pro 3 2160x1440. Note that 1080x720 does not meet PS requirement of 1024x768. Photoshop UI would not fit on the Surface Pro 3 display..
Since you have a 4k display if you have CC 2014 you can use its 2x UI effectively Photoshop will be running on a 1920x1080 display and have half the resolution of you 4K display 3840x2160 pixels four native pixels are use as a single pixel.   1920x1080 pixels exceed PS requirement.

Screen orientation locked despite correct settings in control panel and side switch

Screen orientation locked despite correct settings in control panel and side switch

Make sure this logo do not appear on top right of screen.

Black Screens in applets and even in control panel

When I launch java applets or even go to the Java control panel (I have 32-bit java), I get a black screen such as the one in this screenshot:
http://imageshack.us/photo/my-images/708/java1w.png/
I have an ATI HD 4850 card that has been updated to the latest drivers.
Can anyone help me out?
Thank you!

I figured out how to fix the problem.
I am running Win7 Pro 64 and was running java6. I have an ATI gfx card.
Following posts on other forums, I removed the SDK and catalyst control center from the ATI installation. I also upgraded to java7. After a reboot, there were no more issues with the black screens.

Screen goes to neon colors in Intel HD Graphics control panel

This computer comes with an Nvidea 850 GTX + 4gb card
Whenever I try to change brightness settings in the HD Graphics control panel, my entire screen become illegibly pixelated and turns to neon colors. I can't read or see anything exept pixels and neon colors when this happens. This happens when I move the slider, I don't even need to apply the settings for it to happen.
The only way to get back to a normal display is to close my screen and open it back up again.
How can I fix this? I just got this computer after sending another one back for a hardware issue?
Thanks!
UPDATE
This problem is no longer occuring, please mark this as solved! I don't know what the solution was, I haven't done anything.
Thanks!
This question was solved.
View Solution.

Hi @Emmaus7
Thank you for visiting the HP Support Forums and Welcome. I think that a restart updated the software which has resolved this issue.
Thanks for sharing with us.
Have a good week.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I can't access "control panel" on my 4s from the lock screen. My settings are active

I can't access "control panel" on my 4s from the lock screen or home screen. My settings are active.

You can try resetting Settings>General>Reset>Reset All Settings
if not
Basics from the manual are restart, reset, restore
Follow the 3R's- if a restart does not solve your problem proceed
User troubleshooting is:
1.restart, ie power off/on,
2. reset http://support.apple.com/kb/HT1430,
3. restore from backup, restore as new device. http://support.apple.com/kb/HT1414

GTX590 Cant access NVIDIA control panel Black screen after 10 mins

Hi,
I recently purchased an MSI GTX590 and encountered this problem " Cant access NVIDIA control panel Black screen after 10 mins". I am running Windows7 Ultimate SP1.
I did have an xfire setup of 2xHD6970's, I uninstalled all the old drivers then used driver sweeper to clean out any remaining folders, also uninstalling them from device manager.
Next I installed the latest version of drivers from the NVIDIA site only to find that I am stuck in safe mode resolutions for my screen I cant access the NVIDIA control panel as it is saying " You are not currently using a display attached to an Nvidia GPU ". In device manager it states that
"Windows has stopped this device because it has reported problems. (Code 43) ".
I have now uninstalled and reinstalled about 6 different versions of drivers from NVIDIA including the latest BETA drivers which all have the same issue??????
I have also gone to the MSI site and downloaded their latest recommended drivers for the GTX590 NVIDIA Graphics Drivers Version 267.91 which are the only ones that seem to work as in it fixes the screen to the proper resolution and lets me into the NVIDIA control panel yet after about 10-15 mins the screen will go black or the computer will just freeze. Rebooting causes the same issue after 10-15mins
I have noticed a few others out there experiencing the same problem but no fixes as of yet any ideas??

Thankyou for the reply,
Tested the card in another working machine capable of running and its fine I am sure the PSU I have is more than capable of running this card I ran 2 6970's in xfire on the same PSU and motherboard with no problems.
I am running it on an 40"BRAVIA LCD and am using the DVI to HDMI converter that came with the GTX590 and I have also tried it with an DVI to HDMI cable also.
The system is stable under the latest NVIDIA drivers but the display drivers aren't recognized under device manager and the screen resolution is still stuck in the safe mode size, they are shown up as having the same "error 43" and I still can't get access to the NVIDIA control panel.
I strongly believe this is a driver issue or an issue relating to software within windows. To give you a rundown on several things that I have tried to isolate or fix the issue with is in a list here:
1. Installed every different version of drivers on an fresh install of windows7 including the latest Beta drivers
2. Tried to run the GTX590 on another machine and it runs using windows7
3. Run different graphics card setup using the same PSU RAM and mb on windows7 no problems.
4. Run the gfx card on only 1 gpu no change.
5. Last step I will take is to install Windows7 without the SP1 as I have read elsewhere that similar problems have been fixed by doing this if that don't work might just sell my soul to the devil n see if he can fix it lol.

Control Panel on an 800x600 screen

Similar Messages

Maybe you are looking for