Control Properties Window

Hi everybody,
I want to create a button in the navigation form.
But i have problems with the "Control Properties" pop-up window.
I cant see the last setting on the bottom of this window (Default Value).
An Infobar for dynamic help covers it.
What can I do???

Christine,
Take a look:
"3. Determine if the problem is a client or a server issue.
Because Visual Composer Storyboard is a client-server application, the failure may have occurred on the client machine and not in the main server. To ensure that the Visual Composer client can run Storyboard, check that the following has been installed on the client:
○ Microsoft XML Parser 4.0
○ Adobe SVG Viewer 3.0 or higher
Upon running Visual Composer, if an alert message is displayed indicating that studio.ini is not installed or that the mxml file is not updated, the relevant component has not been properly installed.
These are the main client errors that may arise. If other problems occur, the source is probably on the server side."
from https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1d55042e-0c01-0010-e3a3-b009c445ee23
Regards,
Gilson

Similar Messages

Strange characters / Wrong language in Print Properties (windows 8.1 pro 64-bit)

Dear HP,
When I open 'printer properties' from my Office Word 2013 I get the following.
However, when I open 'printer properties' via Control Panel, everything is OK.

Hi Hakkelaar,
Do these characters appear when you open the printer properties in other programs too, or just from Word 2013? I would suggest you do all of your Windows Updates and restart the computer. If the issue persists the next solution I propose is to delete the printer driver from the Printer Server Properties and then re-add it. Use the instructions below to accomplish this task.
In the ‘Devices and Printers’ folder
2. Choose ‘Print server properties’.
Win XP – With no printer selected, click ‘File’ then ‘Server Properties’.
Windows Vista – With no printer selected, press ‘Alt’ then click ‘File’ then ‘Server Properties’.
Windows 7/8 and 8.1 – Select any printer in the ‘Devices and Printers’ folder and click ‘Print Server properties’ above.
3. Click on the ‘Drivers’ tab at the top of ‘Print server properties’ window
4. Choose the printer you want to uninstall and click ‘Remove’
5. Choose 'Remove driver only'
6. The next screen will give a warning, letting you know that deleting the driver package will remove it from the system. Click ‘Yes’ to say that you are sure you want to do this.
If documents are stuck in the print spooler, you may see an error, cancel any documents pending in the print queue, or try restarting the print spooler, then try to remove the driver from ‘Print server properties’ again. If it still won’t remove the package, restarting the computer and the printer should resolve this ‘in use’ error and allow the driver to be removed.
After the driver is removed, open Start > All Programs > HP folder > Printer folder > HP Setup and Software (or the printer icon).
The Setup and software screen will open and you can click on Connect a new printer.
Please let me know if this resolves the issue or if the issue lingers.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Draggable properties window on Canvas

Hello, in my application I am drawing selectable basic shapes like line ellipse rectangle inside a Canvas control. When user selects these control I want to display a draggable properties window showing different properties like color/width/size for that
shape. This property window should move inside the Canvas when user drags the window. User can select multiple shapes and multiple properties windows can be visible,for,user.
How I can display a property window when user selects the control.

There are several options for property editing.
Coincidentally I'm working on a sample presents one way and lists some alternatives:
https://gallery.technet.microsoft.com/WPF-Property-List-Editing-a9780412
One of those ought to do the job.
The other question is how you show this.
You can make a popup appear in a position relative to a control.
That's one option.
<Popup IsOpen="True" PlacementTarget="{Binding ElementName=yourshape}"
Placement="Bottom">
http://msdn.microsoft.com/en-us/library/bb613596(v=vs.110).aspx
That IsOpen controls whether you see the popup or not.
Bind that to something like maybe IsSelected if you have that on your shapes and it'll appear as the user selects, disappear as they de select.
You didn't ask, but those resize handle thingummies you see in the visual studio designer on controls are adorners.
You could possibly do something similar and make the adorners appear as a shape is selected ( as well ).
Please don't forget to upvote posts which you like and mark those which answer your question.
My latest Technet article - Dynamic XAML

Control of Windows Applications with Creative IR Rem

In other threads, Jeremy has referred to controlling Windows applications w/ a Creative IR remote.
However, he did not identify specifically how to do so, i.e. how to control specific functions w/ in a Windows applications.
I would like to control Windows Media Player with the Creative IR Remote (RM-500) that I use w/ my Audigy 2 NX. Can I program the keys of the remote to manipulate the controls of Windows Media Player, e.g. to select songs, play lists, and other settings? If so, specifically how?
Further, what does the "Parameters" and "Start In" inputs in the Window Applications Properties window in the Remote Control and OSD Settings Program permit's How does one use them?
Thanks.

Have you installed HP Quick Launch & ENE CIR Receiver from your drivers page?
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3772...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Volume Control Properties errror

I have an issues with opening my Volume Control Properties. Everytime I go to double click on it, I get this error
"The audio device supported by this application is not detected. The application will exit."
I have Soundblaster Audigy SE. It worked fine when I had Windows XP, but now that I have Windows 7, it won't open. Any ideas how to fix this?

I unistalled & removed anything creative related, and I downloaded the files from creative instead of using the CD that came w/ my soundcard, and now the Volume Control icon is missing.

Event button within the properties window has disappeared

Hi,
I am new to Visual Studio, I am unable to view the Events button on the Properties window when my controls are placed on the Master page.
Can anyone please advise how to enable the Events button.
I am able to view the Events button sometimes when I can click on the control form the designer.
Thanks

Hello,
Welcome to MSDN forum.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
If you are working with ASP.NET Web Application and the issue is on the web control, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Attribute does not appear in WEBUI document properties windows

I've created a classObject using the xml parser of Ifs' WEBUI:
<?xml version="1.0" standalone="yes"?>
<ClassObject>
<Name>ArquivoXsl</Name>
<Superclass RefType="Name">Document</Superclass>
<Description>Classe de Teste do arquivo de layout de Faturas</Description>
<Abstract>false</Abstract>
<Final>true</Final>
<Attributes>
     <Attribute>
<Name>usuarioCadastro</Name>
<Datatype>String</Datatype>
<Required>true</Required>
</Attribute>
     <Attribute>
<Name>operadora</Name>
<Datatype>String</Datatype>
<Required>true</Required>
</Attribute>
     <Attribute>
<Name>modeloFatura</Name>
<Datatype>String</Datatype>
<Required>true</Required>
</Attribute>
     <Attribute>
<Name>dataInicioValidade</Name>
<Datatype>Long</Datatype>
<Required>true</Required>
</Attribute>
     <Attribute>
<Name>dataFimValidade</Name>
<Datatype>Long</Datatype>
<Required>false</Required>
</Attribute>
</Attributes>
</ClassObject>
After that we've had to update the class with two new attibutes (String, not required) using the iFS Manager. But now, when i select a document (ArquivoXsl) the properties window in WEBUI does not show that attribute.
is there a bug in the iFS 9.0.1 version.
If i create a new class with all these attributes, the WEBUI show them all, even they've being null valued.
Thanks anyone!

Hi
Even after making the attributes as nav attribute in Master data they ought to be marked as navigation attribute on the infoprovider on which you are creating the report.
If the report is based on the cube that uses company code then you need to check it as navigational att in the cube and incase you have a multiprovider at the top of the cube then you again need to check this attribute as navigational in the multiprovider too.
Thus by making comp_code_zregion as nav att in the master data you will not see it in the report you need to make it as nav in the report as well as multiprovider incase the report is based on multiprovider
Thanks
Puneet

The properties window does not open properly for bookmarks.

When I go to Bookmarks > Bookmark This Page, the window that opens should have the information filled in, correct? Because mine is always blank. The bookmark does get made if I click Done, even with everything looking blank. Also, when I right-click on a bookmark & select Properties, the Properties window that opens only shows the blue bar at the top, nothing else. I can't expand the window. It's been doing this since the previous version that I had. Also, keep in mind that I'm a computer technician, so I know what I'm doing.

Hi,
does it happen for all tables or it's related to specific set of tables (or just one table)?
PS. Did some more research: The error message from the logfile seems to be unrelated to the recalcitrant properties window. Yes, those errors are not related to problem.
properties dialog won't appear if there are some errors during initialization of dialog and its related to table that cause the problem. You should be able to open dialog for another table.
It'll be great if you can find out after what changes dialog for some tables doesn't appear.
Thanks,
Philip

Problem with remote control and Windows 7 - HP Pavilion 6301eu

I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you

Hi John:
Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
Thanks for your help though and if you have any other ideas, I'm all ears.
Mark

How to use radioButton(s) and image controls on windows phone 8.1

how to use radioButton(s) and image controls on windows phone 8.1

Hi aspirantme,
>>how to use radioButton(s) and image controls on windows phone 8.1
Which version of your app is? Runtime or Silverlight?
For Runtime version, please see the following articles:
#RadioButton class
https://msdn.microsoft.com/en-us/library/windows/apps/windows.ui.xaml.controls.radiobutton(v=win.10).aspx
#How to add radio buttons (XAML)
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh868200.aspx
#Image class
https://msdn.microsoft.com/library/windows/apps/br242752.aspx
For Silverlight version, please refer to the following documents and guidelines:
#RadioButton Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.radiobutton(v=vs.105).aspx
#RadioButton control design guidelines for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/hh202881(v=vs.105).aspx
#Image Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.image(v=vs.105).aspx
#Quickstart: Images for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/jj206957(v=vs.105).aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How To Install/Configure OEM Grid Control On Windows

Hi,
I've downloaded OEM Grid Control for windows (32-bit) from oracle site.
This .zip files has 3 more .zip files eg
File Size
3822442.zip 510 MB (535,208,588 bytes)
3731596.zip 275 KB (282,502 bytes)
3731593.zip 510 MB (535,047,905 bytes)
Can you pls tell me which one is actual OEM Grid Control software, and what are the other .zip files ?
Pls email me at [email protected]
Your help greatly appretiated.
Regards,

You will be needing all three zip files. It will contain all files needed for installation of a repository Database Instance, the Management Server and an Management Agent.
cheers
Rob

How to install oracle10g grid control on windows

i want,
how to install oracle10g R3 grid control on windows
in my server ,i have 4 database ..oracle10g R2 ..is running...

http://download.oracle.com/docs/cd/B16240_01/doc/nav/portal_booklist.htm

Editing metadata in the file properties window

Hi,
I’m using Win XP SP3 on a “normal” Desktop-PC. Since my problem is not connected to hardware I think that description is enough but I do not know which software information is required. So you may ask. Important is maybe that I am running Adobe Acrobat and Reader simultaneously on the same machine.
The problem: I always changed and edited some of the metadata of my PDF files by bringing up the file properties window of the PDF (right click - properties). Next to the “General”-Tab is the “PDF”-Tab. You can see the title, author, topic, dates and PDF-Version of the document. The first four fields where always editable textboxes. I get used to put in some comments and other important information because I didn’t want to use any tool. Now the complete window is locked. Is this because of the new 9.3.3 Reader update? I updated so many times and never anything like this happened. How can I turn back to the old behavior?
I do not want to edit those information in Acrobat by choosing File and then propertis because it takes much more time because i have to open the file (if it is one its fine) but if there are more where the same info shall be in I'd like to use the built in function of the properties sheet in windows.
With kind regards
DragJo

At first I asked that question by mistake in the wrong forum so I put in it here. But it has been answered there http://forums.adobe.com/message/2973589
so I mark this as answered, too.

Unable to view components in Object Browser & Properties window- Xcelsius

Hi - I have prepared a dashboard which consits of many labels and just a few components. But as I proceed with taking more components on the dashboard ,I am unable to see the components in the object browser and properties window (it is just visible placed on the canvas but not visible in obj browser and Property window)....can any1 suggest the reason and how to proceed ?

HI,
Check in the object browser, whether there is any group element. if all your components are grouped, then they will appear under that group. if you click on any component which is grouped the property window of the group will be displayed.
if you want to see the propery of each individual component, in the object browser-- expand the node and double click the component to see its properties.
hope this helps
uma

Problem with Page properties window

In Page properties window,the window is too small some part
are invisible,example: in apearance i cant access right
margin,bottom margin,page font exept if i use tab,but i cant see
what i type in the box.Where I can post picture coz picture is
milion words?Please help me.

Page Properties is not resizable. Sounds like the user has
their system
fonts set to large.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"SnakEyez02" <[email protected]> wrote in
message
news:fl1qqc$p7o$[email protected]..
> Just upload the picture to some web space and post a
link.
>
> If I am understanding your question correctly though,
can you not just
> drag the bottom right corner to make the window bigger?

Control Properties Window

Similar Messages

Maybe you are looking for