Control queries in Info Broadcater 7.0

We are preparing to upgrade from BW 3.5 to 7.0. One of the features we will use is the creation of PDF files in the Information Broadcaster. I know that multiple .csv files can currently be created using the control query option. In 7.0, can PDF's also be broken out into different data providers using this same option?
Thanks,
Ginny

Ginny,
Yes, It is possible.

Similar Messages

Getting List of Workbooks or Queries by Info Area

Hi All,
I want to find and categorize all workbooks/queries by Info Area
I understand that this information could be found under Metadata Repository.
But there are 4000 workbooks/queries which I want to categorize and I was searching for for backend tables or a program where I could find a link between the Info Area and Workbooks/Queries so that I could get list of the workbooks/Queries sorted by Info Area in one go.
Can you please help.
Thanks,
Gaurav

Hi Gaurav
Please check the below thread..you have answer
List of Queries/Workbooks
Regards,
Venkatesh

Queries: duplicate info when executing a HR query

Hi.
Friends, i trying to do a query with info of two infotipes: 21 and 482 (aditional info of it21), when i execute the query the result it's a cartesian product (wrong result).
For example:
DATA
IT21
PERNR Subty Name
1 10 ssssss
2 11 dddddd
IT482
Pernr subty identity card
1 10 5
2 11 6
Result
Wrong Result with cartesian product of the query:
PERNR subty name it482-subty it482-identity card
1 10 ssssss 10 5
1 11 dddddd 10 5
1 10 ssssss 11 6
1 11 dddddd 11 6
The correct result must be:
PERNR subty name it482-subty it482-identity card
1 10 ssssss 10 5
1 11 dddddd 11 6
I think that the join of the PNPCE logical database it's performed using just personel number (pernr), how could i solve this issue?
Thanks in advance.
Albio.-
Solved in HCM Forum: Re: Queries: duplicate info when executing a HR query
Edited by: Albio Manuel Vivas on Aug 16, 2011 7:35 PM

I found where to put the switch, but it doesn't work.
I did this:
1) in the infogroup (tx sq02): goto/ code / data. Then i typed:
*$HR$ [P0482]
*$HR$ PRIMARY_INFTY = 'P0021'
2) save
3) verify
4) generate
Then i use the transaction S_PH0_48000513 - Ad-hoc-Query , and create a query, i save it, and execute, then the result it's wrong. I check the program generated by the query, and search for this text: 'hr-log' where are supposed that the code must appears, and the code that i added doesn't exits.
Any idea?
Thanks in advance.
Albio.-
Edited by: Albio Manuel Vivas on Aug 16, 2011 6:14 PM

Fios remote control and actor info

When I push info on my remote control it only gives me a description of the movie or show, but it doesn't tell me who the artists are. This was one feature I liked from my previous service which was Direct TV. Does anyone know if such a feature is available on the FIOS remote control??

How many times are you pressing the Info button? If you press it a second time you will usually get more information, and if the info will not fit completely in that display a third push of the info button will get you everything that FiOS has available. It is not always as complete as you would like but my experience is that it generally is now fairly good (much better than several years ago).
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7.1, Build 09.97
Keller, TX 76248

Precalculated Web Templates - Variants and Control Queries!!

Hi,
We are having some problems with precalculating a web template.
Within the template there are multiple queries that need to be precalculated. All of these queries are using a variable and control query to select a currency. However, whenever we schedule it to precalculate it always cancels!! When we take the variant out we have no problems and it runs.
Do you know if there are any problems running multipul queries from the same variant, or what the problem may be?
We are running on version 3b.
Any help would be gratfully received.

Hi Ashish,
Yes all of the variants have been maintained in the Reporting Agent. Even if we just try it with one variant it still doesnt want to precalculate!!!
Any more help would be great.
Thanks
Abi

ISR NATIVE CONTROLS ERP -2005 is not working in ECC 6.0, MSS 1.0 Version

Hi,
Does anybody knows, why the ISR Controls for ERP 2005 is not working properly. We utilized the DropDown List Controls, we binded to the correct field in the FORM. We have filled the ADDITIONAL_DATA table, on the SET_ADDITIONAL_VALUES method also, to populate .
The DropDown values are not populating in runtime.
We are running ECC 6 Version, Basis is on SP12, and Application Platform is on SP09. We have MSS 1.0 for SP 10.
What might be the problem, what do you feel about procedure in ISR Controls binding?
INFO: It doesn't have that SAP-VHLIST , illusion here.
Please guide me , as I am strucked from all ways, any note, patch to apply, any config issue.
thanks,
chitti babu

Hello,
In case of DDLB, apart from the binding, there's something else needs to be done.
Goto binding tab : incase adobe life cycle designer 7.1, a link "Specify item values" is highlighted.
$record.sap-vhlist.FIELDNAME\.DATA\.FIELD.item[*].
Item Text : text
Item Key :key.
This should resolve ths issue.
Hope this helps.
Best Regards,
Saujanya

Error while copying queries

Hi Community,
                      I am trying to copy queries from Info Cube to Multiprovider using RSZC, I got error called
"InfoObject 0MATERIAL__0DIVISION missing from target InfoCube ZSCMIM_M1"
"InfoObject 0MATERIAL__MATL_CAT missing from target InfoCube ZSCMIM_M1"
"InfoObject 0MATERIAL__MATL_GROUP missing from target InfoCube ZSCMIM_M1"
"InfoObject 0MATERIAL__MATL_TYPE missing from target InfoCube ZSCMIM_M1"
"InfoObject 0PLANT_COUNTRY missing from target InfoCube ZSCMIM_M1"
            I created Multiprovider with one basic info cube in BI 7.0. by draging dimensions,keyfigure, Unit, time from left to right than I selected the "Select key figures Icon" --> Selected Create proposal for all Infoobjects" same as for Charecteristics.
             I checked the attributes and charecterisctics they are active. Please help me ....
Regds
Dave.

Hi sap Experts,
I have problem in the creation of Hierarchies.
I am working in BW 3.1 IDES
TO_MAT is a CHAR, I have to create Hierarchy for this. I have done the following,
1.Under the Hierarchy Tab I enable Time dependent Hierarchy structure and activated.
2.On Rt.click -->Create Hierarchy- Given Name and description
Now I am in Hierarchy material Change: Modified version window
3.clicked Create Charactaristic Node button
When I selelct the Info Object CHAR - [ " Info Object TO_MAT is not entered for TO_MAT as a foreign Hierarchy Characteristic"] this error is coming. I tried with other CHAR also. advice me to correct this .
Help will be Highly appreciated.
Thanks.
Hema

PO creation date and info record validy price relation.

Dear Gurus,
While creating a PO, when I change the PO creation date, price in the PO will change according to the validity start date based on the PIR.I believe thats the logic right? I have a scenario, I'm facing a problem that when I change the PO creation date between 2011 and 2012 period, the price of the PO at times will not change according to the PIR validity start date. Is there any OSS note related to this issue or I'm missing out any logic?
Validity periods
Validity on        Validity to         Deletion Flag.
04.11.2011       31.12.2011              x
01.01.2012       31.12.9999

HI,
By default, the pricing conditions are dependant on PO document date.
But there are different options like, whether you want your pricing to be dependant on Delivery date of PO item or current date (sy-datum) or GR date etc.
This filed is available in 2 places: 1. Vendor master>purchasing data> Pricing Date Control
2. Info record>Purchasing data> Pr.Date Cat.
Check in these 2 places and then simulate pricing by changing the corresponding date.

Control file

Control File stores this info...
*** The timestamp of the database creation
Q) what is the use of storing this info in control file?
Info from :
http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96521/control.htm
2)
Control file stores info for each database,
means Multiple databases -->Multiple Control Files.
Q) why there are so many files as init<sid>.ora and control_filea. why these all files are not merged into 1 file and why not SYS schema dict. not stores this all info as SQL server stores these into 1 place and manages itself.
Ya i know all the files and their configuration and the steps in startup database. pls provide me why all these files can't be merged into 1 file.
Manish

Why do you think it might be wrong?
APC

Is it possible to create a multi provider with different info providers?

hi all,,
Can anyone let me know is it possible to create multi-providers from different info providers.
thanxs
haritha

Hi..
An infoprovider is an SAP BW object you can use to create and excute queries . Info providers include objects that physically contain data , for expale ... data target like info cube , ods onjects , and info objects ( char , att, text or hier ..)
They also include objects that do not represent physical data storgae :
Remote cubes , sap remote cubes . and multiproviders.
info providers are objects or views relevant to reporting ..
info providers can include
info cubes ( basic cubes and virtual cubes )
ods
char obj ( with attt or text )
info set
multiproviders
with regards,
hari

Query for Info Provider

How to create query for infoprovider ? I have selection criteria, calculation and result screen for queries taken from one reference query. I am new to this part so dont know which transaction we will use to create query. Is it APO part or BI/BW part ?

I have to create queries for info provider. I have one reference query. I have to create similar selection screen as that of reference query for new query. Calculation which needs to be included in query is provided also result screen for query is given.
how to create query in APO using above input? Which transaction do we use to create query ?
I heard about BEx query analyzer which is there in BI for query creation . Is similar BEx functionality is available in APO ? If yes , what is t-code used for that? I know one tcode - RSRT with which I can see existing reference query selection? Is there similar tcode for query creation also in APO?

How a custom control is advised it gains or looses focus?

Hey, at least I have a question to ask, instead of answering them... :-)
Actually, I already asked it in another thread, in one of my answers: [onMouseClicked Event Is Failing To Fire|http://forums.sun.com/thread.jspa?threadID=5391008] but I fear it is lost in a rather lengthly message, so I ask it in its own thread, because I was to bring the attention of knowledgeable people (hello Sun people! :-D).
The question is simple: In a custom control in JavaFX 1.2, with skin and behavior, how a control is advised when it gains or looses focus?
The purpose is to let the skin to change the look of the component upon these events, like it is done for standard controls (eg. putting a border around the focused control).
If the control is clicked, you know (unless it is disabled) that it will have the focus. But I see no way to see the lost of focus, nor when we gain (or loose) it with Tab/Shift+Tab (if it has focusTraversable to true).
I looked for onFocus() and onBlur() events (or similar), but found nothing. No mixin, nothing related in javafx.scene.input.TextInput and friends, etc.
I explored the Web but since 1.2 is still new, I found not much information. Only a fragment of source code in [Re: Further location optimizations|http://markmail.org/message/gsevtlkeq45rrdun] where I see scene.getFocusOwner() but this one isn't easily usable because it is package protected (and it is not an event, anyway).
A possible solution would be to have a timer to inspect the state focused of the nodes, but it is so kludgy I didn't even tried to implement it!
I hope I just missed the information... If there is no easy/official/working way in 1.2, I hope this will be corrected for next version!

That's a very good remark, handling of focus highlight shouldn't be done at control (model)'s level. I hesitated to put it in behavior, but it feels more natural in the skin, so I did as you suggested.
you'll need an interface, and JavaFX does not do thatYou have mixins. But I didn't used them here.
focused variable never is set to trueHave you included the
public override var focusTraversable = true;
line?
To support multiple skins, my control becomes:
public class StyledControl extends Control
// Data related to the control (the model)
public var count: Integer;
public override var focusTraversable = true;
init
    if (skin == null) // Not defined in instance
      // Define a default styler
      skin = ControlStyler {}
package function Incr(): Void
    if (count < 9)
      count++;
}quite bare bones (I intendedly keep the model simple).
Note I still define a default skin in case user doesn't provide it: they shouldn't care about this detail unless they want to change it.
I defined an abstract default skin, implementing most variables (particularly the public ones that can be styled) and the focus change:
public abstract class DefaultControlStyler extends Skin
//-- Skinable properties
public var size: Number = 20;
public var fill: Color = Color.GRAY;
public var textFill: Color = Color.BLACK;
public var focusFill: Color = Color.BLUE;
package var mainPart: Node; // Decorations (id, focus) are kept out of layout
package var focusHighlight: Node;
package var idDisplay: Text;
package var valueDisplay: Text;
init
    behavior = ControlBehavior { info: bind control.id }
    node = Group
      //-- Behavior: call controller for actions
      onMouseReleased: function (evt: MouseEvent): Void
        (behavior as ControlBehavior).HandleClick(evt);
postinit
    // Once defined by the sub-class, insert into the node
    insert [ mainPart, idDisplay, valueDisplay ] into (node as Group).content;
public abstract function ShowIncrement(): Void;
var hasFocus = bind control.focused on replace
    if (hasFocus)
      ShowFocus();
    else
      HideFocus();
// Default handling of focus display, can be overriden if needed
public function ShowFocus(): Void
    insert focusHighlight into (node as Group).content;
public function HideFocus(): Void
    delete focusHighlight from (node as Group).content;
public override function contains(localX: Number, localY: Number): Boolean
    return mainPart.contains(localX, localY);
public override function intersects(localX: Number, localY: Number,
      localWidth: Number, localHeight: Number): Boolean
    return mainPart.intersects(localX, localY, localWidth, localHeight);
}and the concrete skins implement the mainPart, idDisplay, valueDisplay, focusHighlight nodes, override ShowIncrement with an animation, override getPrefWidth and getPrefHeight to set to mainPart size and might override ShowFocus or HideFocus (if we want it behind mainPart for example).
The behavior is:
public class ControlBehavior extends Behavior
public var info: String; // Only for debug information...
// Convenience vars, to avoid casting each time
var control = bind skin.control as StyledControl;
var csSkin = bind skin as DefaultControlStyler;
public override function callActionForEvent(evt: KeyEvent)
    println("{info}{control.count}: KeyEvent: {evt}");
    if (evt.char == '+')
      Incr();
package function HandleClick(evt: MouseEvent): Void
    control.requestFocus();
    Incr();
function Incr(): Void
    control.Incr();
    println("{info}: Ouch! -> {control.count}");
    csSkin.ShowIncrement();
}and knows only the abstract default skin (to apply feedback of user input to skin).
I use it as follow:
Stage
title: "Test Styling Controls"
scene: Scene
    width: 500
    height: 500
    content:
      HBox
        translateX: 50
        translateY: 100
        spacing: 50
        content:
          StyledControl { id: "Bar" },
          StyledControl { /* No id */ layoutInfo: LayoutInfo { vpos: VPos.BOTTOM } },
          StyledControl { id: "Foo" },
          StyledControl { id: "Gah" },
          StyledControl { id: "Bu", skin: AltCtrlStyler {} },
    stylesheets: "{__DIR__}../controlStyle.css"
}BTW, I tried layoutY: 50 in place of the layoutInfo definition, but the control remained at default place. Am I reading incorrectly the ref. or is this a bug?

Version Control for BUSINESS OBJECTS repository

Hi,
Do we have any version control for business objects repository?
Thanks

Hi
I am hoping someone can answer my Version Control queries. The LCM document is limited in its detail on VM.
I am currently testing the BO LCM 3.1 and while it appears very easy to use especially for promotion, the Version Control Manager seems to be lacking in controls and a clear promotion path from dev to test to uat to prod.
We have set up 2 identical environments for UAT and PROD.
And using the Version Control part of LCM creating version control for a universe.
Logged into VM in UAT
We have selected a universe
Added it to VM
Made a change to the universe in Designer
Exported it
Then Checked it in
Can now see 2 versions in the history and the VMS Version. All good
I then click on swap system and log into PROD
The VM history is also there in PROD
I have a number of concerns and questions and can't seem to find the solution to them anywhere.
1. VM seems to be lacking a controlled process from all the environments. Basically we want to deploy following this path;
Dev - Test - UAT - PROD
There does not seem to be any controls or security which would stop you from GET VERSION from the DEV environment and putting that straight into PROD. Obviously we would not want that to happen.
We would only want to GET VERSION from UAT
Similarly for UAT We would only want to GET VERSION from TEST
And for TEST We would only want to GET VERSION from DEV.
Granted, we currently only have 2 identical environments.
But Is there controls that would stop you when in PROD from getting versions from any other system other than UAT?
Also is there any reason why no promotion is required when using VM.
This seems to negate the Promotion Function of the LCM
Any advise would be greatly appreciated with this.
Many thanks
Eilish

How to limit Data Packages/ Info IDoc in InfoPackage to 3 while executing

Hi,
In our system BW 3.5 We have couple of both BC Extractors and Generic extractors. All are working fine, but with one generic extractor I got problem like if I run the InfoPackage of Full Load type. All 34 Data Packages are fludded at a same time( but with other InfoPackages only 3 Info Idocs are running at a time and new Info Idoc is starting only after completing old Info Idoc).
So Please let me know how to control only three Info IDocs at a time than all Info IDocs at a time. because I am scraring on monitoring in SM66 and all dialog Processes are looking same time and executing all Data Packages in same time.
I will assign points.
Thanks,
Kaveri

HI Kaveri,
http://help.sap.com/saphelp_nw2004s/helpdata/en/17/e0603801be792de10000009b38f842/frameset.htm
just go through the above link....
Hope it helps,
Ajay

Xml slideshow controls, need help!

Hello,
I am new to actionscript and am trying to make a slideshow
with next and previous controls. The info for the slideshow is
coming via xml. I have it up and running but there are two issues.
When clicking on the next or previous buttons the new image will
load but the first image will be present under the new image. So if
you are navigating from image 2 to 3, while image 3 loads, image 1
is visible. The next problem I am having is I would like for the
slideshow to repeat itself once it gets to the end.

Sorry 2 more things.
In the above link to get to the slideshow, click america,
then new england.
And it appears that on the initial load the first image loads
17 times, which is the total number of images in the slideshow.
Thanks again

Control queries in Info Broadcater 7.0

Similar Messages

Maybe you are looking for