Control receipe and PI sheet
Dear Experts
Can u guide me what is purpose of creating control receipe and PI sheet in system.
also plz tell me step by step config and creation of both with T code.
Dear,
Master recipe will contain the Resources to be used and the duration of the process.
Process order will generate control recipe. Control contains process Instructions.While creating / Releasing the process order control recipe will be created.
PI Sheet: Process Instructions can be attached to the Master Recipe. Process Instructions assigned in master recipe will generate control recipe. PI Sheets in PP-PI offer a lot of functionality to streamline a manufacturing process
For details steps please refer this link,
[Step in PP-PI|Re: PI sheet & Controll recipe]
Regards,
R.Brahmankar
Similar Messages
-
Control recipe and PI sheet creation creation
HI frnds,
Please explain me the configuration and path of creating control recipe and PI sheet.
thanks in advance
DanielHI,
plz respond as earliest
Daniel -
Hi, All,
Can I know what's the difference between master recipe and PI sheet? And what's difference between master recipe and control recipe?
I know control recipe is generated from process order. What's the output of master receipe? But how to generate PI sheet? what's the PI sheet output?
ThanksHi,
Master recipe will contain the Resources to be used and the duration of the process.
Process order will generate control recipe. Control contains process Instructions.While creating / Releasing the process order control recipe will be created. It can be created automatically or manually. We shall discuss the manual creation.
PI Sheet:
process Instructions can be attached to the Master Recipe. Process Instructions assigned in master recipe will generate control recipe.
Regards,
Mohan -
Control Recipe and PI sheet assignment in Master Recipe
Hi,
Can anyone guide me in detail about the Assignment of PI sheets in detail and also guide me the generation of Control recipe during Process order release.
Also explain hoe to generate PI sheet automatically. brief me in Step by step.
Regards,
MuthamilClosed
-
Control receipe creation in process order
Hi,
Can you please tell me how to create control receipe.
After releasing the process order when I select the button for creating control receipe. System shows error as " No control receipe generated"
Please tell me the basic steps required to create control receipe and PI sheet.
Regards
KarthikeyanHi,
Check In master Recipe ,in the PI Tab,There must be some PI category is assigned and in that PI Category,this PI Charactiristic has been assigned.
First goto that Phase of the Master Recipe and then goto PI tab and then find the PI category.
In Process order
Goto->List->Control Recipe List--->
As per above link first find out Control Recipe is generated or not and also find out its status.
If Status is Created then you can find it in CO53,
if status is Sent then you can find it in CO55 or CO60
Please rfer this thread also,
https://forums.sdn.sap.com/click.jspa?searchID=16154042&messageID=5839678
Regards,
R.Brahmankar -
Control recipes for PI sheet and external system
Dear All,
I need to create control recipe for PI sheet and for external system also. Can I use the characteristic based process instructions? Since I can assign only one control recipe destination for a phase, can i generate the data of a particular phase in both the control recipes.
Thanks in advance
Regards
PrathibThanks Brahmankar,
But i dont understand what to enter in input parameters for EAD_TEXT.
Could you plz help me out.
Best Regards,
Parag Save. -
Simple Question about BW reports p&l and balance sheet
I haev two reports Balance sheet and P&L both have the same fields AS below, i want to know what is the key field which i can make the variable for user to display balance sheet or P&L is that 0GLACCEXT financial statement can do that.Any hints will also be appreciated
Account Number
Company code
Business area
Joint Venture
Controlling area
Fiscal year/period
Currency
Transaction Type
Trading partner
Profit Center
Cost Center
Cost Element
Functional Area
Key Figures
Financial Statement
Account Segment
Chart of accounts
Company code
Currency Type
Comparative Fiscal year/ period
Fiscal Year Variant
Fiscal year/ period
Version
thanks
Regards
Soniya KapoorCan u PLEASE clarify if 0GL_ACCT HAS two nav attribute which can be used as filter P&L Account and Balance sheet Account to distingush the between the p&l and BAl sheet
but now user want one field like "psbl" which will write on report either pl or bs
please tell how to make the field as free characteristic so that it will pop as pl or bs once user click on it .i will reward all points after this small help
thanks
soniya -
Control Panel and Sherlock in Panther
Can someone please tell me how to find Sherlock and the Control Panel in Panther? Since I switched over from Classic 9. etc I can't find my way around as easily and have been informed about the Control Panel and Sherlock which I loved and used a lot on the Mac 9. etce but can't locate them on Panther. Do they exist there or not???? Please help. Thanks in advance.
iMAc Special Edition Mac OS X (10.3.9)Hi Julie. The first thing you'd better remind yourself of, every time you sit down at your 'puter, is that Panther's a whole new breed of cat. You just can't assume any of the OS 9 things are the same—even if they look the same; aliases being an example—no matter how much you (and I) might want them to be. David Pogue's Missing Manual for OPanther was a h u g e help to my adjustment.
One of the good things in Panther is that fat, bloated Sherlock2 was stripped of its Find… function. Command-F brings up an efficient System7-8.6 style dialogue, although it does have quirks: for one, it doesn't search the "System" folder unless specifically told to; "Search everywher" isn't enough. The internet part of Sherlock still shows up in my "Applications" folder. As X is more candid than OS9 about classifying things near and dear to Apple as apps like any other, you may find a few other faves there or in Utilities. In case the thought occurs to you, do NOT move them elsewhere, or establish subfolders in Applications to sort them—work w/ aliases—as X counts on finding such stuff where it expects, in a simple alpha list.
Control Panels—which used to proliferate like mad, due to 3d party items—are now Panes (and Panes within Panes) within System Preferences. Most often 3d parties' add-ons are written as Applications or Utilities, though there are some written as Panes. It's actually quite efficient, though annoyingly harder to get to than the old cascading menus under the Apple.
As you might expect, there are 3d party products that 'restore' old-world faves like the Apple menu and disable the sheet-spitter, but that's stretching this topic.
Best wishes for your Panthering; I'm sure you'll find some stuff you come to love, along with thing you'll miss, but isn't that life in a nutshell? -
Detect Control-Plus and Control-Minus
Hi,
I want to detect keyboard events in a swing application, with the Control key and the '+' or '-' keys pressed (the ones from the keyboard, not from the numpad).
This is to provide similar behaviour than Firefox for increasing and decreasing the font size.
I have an English keyboard, in which + is with = key, to be pressed with shift, and - can be pressed directly, without shift.
I've tried many ways to achieve this behaviour, but have not succeeded yet.
Platform is Java SE 1.6.0_07 on Red Hat Enterprise Linux 4 with Gnome.
import static java.awt.event.InputEvent.*;
import static java.awt.event.KeyEvent.*;
import static javax.swing.KeyStroke.getKeyStroke;
// Within some method in some class...
KeyStroke ctrlPlus, ctrlMinus;
// Menu items seem correct, but none of the combinations work for me
ctrlPlus = getKeyStroke(Character.valueOf('+'), CTRL_DOWN_MASK); // menu item shows Ctrl-+
ctrlMinus = getKeyStroke(Character.valueOf('-'), CTRL_DOWN_MASK); // menu item shows Ctrl--
// Menu items seem a bit strange; Ctrl - works, but Ctrl + doesn't
ctrlPlus = getKeyStroke(VK_PLUS , CTRL_DOWN_MASK); // menu item shows Ctrl-Plus
ctrlMinus = getKeyStroke(VK_MINUS, CTRL_DOWN_MASK); // menu item shows Ctrl-Minus
// None of these combinations work
ctrlPlus = getKeyStroke("control +"); // menu item shows nothing
ctrlMinus = getKeyStroke("control -"); // menu item shows nothingIt seems I can get the desired behaviour with '+' and '-' of the numpad, but:
1. They are more weird than the normal '+' and '-' keys, which are the ones used by Firefox
2. The menu items show Ctrl-Numpad + and Ctrl-Numpad - as shortcuts, which are weird also
3. Not all keyboards have a numpad.
A solution would be very much appreciated... as well as rewarded with the dukes.KeyStroke.getKeyStroke(KeyEvent.VK_EQUALS, KeyEvent.SHIFT_DOWN_MASK | KeyEvent.CTRL_DOWN_MASK)This works indeed with CTRL_DOWN_MASK alone (not tested with the other mask), thanks.
However, this solution has two drawbacks:
1. The accelerator string is shown as Ctrl-=, while I want Ctrl-+ to be shown
2. '+' key may not coincide with '=' in non-English keyboards (e.g. it doesn't coincide in Spanish keyboards)
I've found a solution that required a bit more work:
1. Create the actions with the keyStroke you want to be shown (in my case, Ctrl-- and Ctrl-+):
ctrlPlus = getKeyStroke("ctrl typed +"); // Ctrl-+ is shown
ctrlMinus = getKeyStroke("ctrl typed -"); // Ctrl-- is shown
Action actionPlus = new AbstractAction() { ... };
actionPlus.setAccelerator(ctrlPlus);
Action actionMinus = new AbstractAction() { ... };
actionMinus.setAccelerator(ctrlMinus);2. Bind the keys you actually want to the corresponding action:
JComponent window = ...; // root window
InputMap inputMap = window.getInputMap(JComponent.WHEN_IN_FOCUSED_WINDOW);
ActionMap actionMap = window.getActionMap();
Object actionMapKeyPlus = "ctrl+";
Object actionMapKeyMinus = "ctrl-";
inputMap.put(getKeyStroke(VK_EQUALS , CTRL_DOWN_MASK), actionMapKeyPlus); // + key in English keyboards
inputMap.put(getKeyStroke(VK_PLUS , CTRL_DOWN_MASK), actionMapKeyPlus); // + key in non-English keyboards
inputMap.put(getKeyStroke(VK_ADD , CTRL_DOWN_MASK), actionMapKeyPlus); // + key on the numpad
inputMap.put(getKeyStroke(VK_MINUS , CTRL_DOWN_MASK), actionMapKeyMinus); // - key
inputMap.put(getKeyStroke(VK_SUBTRACT, CTRL_DOWN_MASK), actionMapKeyMinus); // - key on the numpad
actionMap.put(actionMapKeyPlus, actionPlus);
actionMap.put(actionMapKeyMinus, actionMinus);More complicated than expected, but at least works.
Thanks for the help.
God bless,
Jaime -
Wifi will not work. The button in settings seems to be locked. Tried control panel and siri to turn it on, doesnt work because the settings wont turn it on. Need help ASAP cause my data limit is approaching.
If the battery was completely drained the iPad will not respond for some time after connecting it to the charger. Connect the iPad to the charger that came with it and plug that into a good wall outlet. Wait 30 minutes. Then reset the iPad.Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
If the iPad restarts let it continue to charge until it's battery shows fully charged. If the iPad still does not start Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. Be sure to back up your device before taking or sending it to Apple. -
I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.
+For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
*Settings I have Enabled*
5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
Use Wide Channels is recommended for 5 GHz operation.
Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network. -
MacBook Pro 2.3 os 10.6.8 control-C and Control-v don't work
On MacBook Pro 2.3 OS 10.6.8, control-c and control-v don't work in any app Please help
If you mean copy and paste, that's Command c and Command v, not control key.
-
Control File and SPFILE Autobackup command struck
O.S Version:
Linux Version "Red Hat Enterprise Linux Server release 6.2 (Santiago)
Linux version 2.6.32-220.13.1.el6.x86_64 ([email protected]) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #1 SMP Thu Mar 29 11:46:40 EDT 2012
2.6.18-308.16.1.el5 x86_64
Tape Archiver : HP Data Protector
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Problem :
In one of our environment, OEM grid 11g scheduled Level 0 backup struck at the Control File and SPFILE Autobackup.
RMAN Script:
run {
2> backup format '<%d_%s:%t:%p:%f>.df' incremental level 0 cumulative database;
3> sql 'alter system archive log current';
4> backup format '<%d_%s:%t:%p>.al' archivelog all not backed up;
5> }
RMAN Configuration
RMAN> show all;
RMAN configuration parameters for database with db_unique_name TestDB are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 45 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO 'SBT_TAPE';
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE 'SBT_TAPE' TO 'TestDB_%F';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'TestDB_%F';
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 4 BACKUP TYPE TO BACKUPSET;
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE 'SBT_TAPE' TO 1;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE 'SBT_TAPE' TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' PARMS 'SBT_LIBRARY=/opt/omni/lib/libob2oracle8_64bit.so,ENV=(OB2BARTYPE=Oracle8,OB2APPNAME=TestDB,OB2BARLIST=Siv_ORA_TESTSrvr1_TestDB_DB,OB2BARHOSTNAME=TESTSrvr1)';
CONFIGURE MAXSETSIZE TO UNLIMITED;
CONFIGURE ENCRYPTION FOR DATABASE OFF;
CONFIGURE ENCRYPTION ALGORITHM 'AES128';
CONFIGURE COMPRESSION ALGORITHM 'BASIC' AS OF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE ; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '+DG_TestDB_UAT_DATA_01/TestDB/TEMPFILE/snapcf_TestDB.f';
RMAN Log:
1. Backup started at 07-SEP-2013 07:09:46
Finished backup at 07-SEP-2013 07:16:38
Wherein the Control file backup started at 07-SEP-2013 07:16:38 failed at 09/07/2013 12:44:38. It kept struck for 5 Hours.
Starting backup at 07-SEP-2013 07:09:46
allocated channel: ORA_SBT_TAPE_1
channel ORA_SBT_TAPE_1: SID=250 instance=TestDB device type=SBT_TAPE
channel ORA_SBT_TAPE_1: Data Protector A.06.20/370
allocated channel: ORA_SBT_TAPE_2
Finished backup at 07-SEP-2013 07:16:38
Starting Control File and SPFILE Autobackup at 07-SEP-2013 07:16:38
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of Control File and SPFILE Autobackup command on ORA_SBT_TAPE_1 channel at 09/07/2013 12:44:38
ORA-19506: failed to create sequential file, name="TestDB_c-2078060264-20130907-ff", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
Vendor specific error: Cannot find requested element ERR(-2)
ORACLE error from recovery catalog database: ORA-03113: end-of-file on communication channel
Process ID: 2045
Session ID: 89 Serial number: 36509
RMAN> delete noprompt archivelog all backed up 1 times to sbt;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of delete command at 09/07/2013 13:00:07
RMAN-06004: ORACLE error from recovery catalog database: ORA-03114: not connected to ORACLE
RMAN> **end-of-file**
Why does the RMAN Backup struck at Controlfile , SPFile autobackup?Hello;
I believe the issue is caused by your media management software. You should contact your media management vendor.
Try the same operation to disk and I bet it works.
Best Regards
mseberg -
In 10g can we dump control file and get SCN info.
Hi,
I have a question can any one help me on this.
In 9.2.0.5 we could dump the control file and get the SCN using the command :
alter session set events 'immediate trace name CONTROLF level 10';
In 10.1.0.4.0 the output of the dump has changed and we do not get the SCN. or any of the following information :
DATABASE ENTRY
CHECKPOINT PROGRESS RECORDS
EXTENDED DATABASE ENTRY
REDO THREAD RECORDS
LOG FILE RECORDS
DATA FILE RECORDS
RMAN CONFIGURATION RECORDS
LOG FILE HISTORY RECORDS
OFFLINE RANGE RECORDS
ARCHIVED LOG RECORDS
BACKUP SET RECORDS
BACKUP PIECE RECORDS
BACKUP DATAFILE RECORDS
Can I get similar output in 10g as 9i ?
with regards,
Dilip.Hi.
What are you trying to achieve here? If you just want the current SCN, you can get it using one of these:
SQL> select current_scn from v$database;
CURRENT_SCN
8058824527
1 row selected.
SQL>or
SQL> select dbms_flashback.get_system_change_number from dual;
GET_SYSTEM_CHANGE_NUMBER
8079317404
1 row selected.
SQL>Cheers
Tim... -
Revision: 14521
Revision: 14521
Author: [email protected]
Date: 2010-03-02 12:47:27 -0800 (Tue, 02 Mar 2010)
Log Message:
ChromeLibrary: moving live and recording buttons to the left hand side of the control bar, and making the button backdrops a little bigger.
Modified Paths:
osmf/trunk/libs/ChromeLibrary/assets/control bar.ai
osmf/trunk/libs/ChromeLibrary/assets/images/eject_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/fullScreenEnter_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/fullScreenLeave_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/live_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/live_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/live_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/minus_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/minus_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/minus_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/pause_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/play_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/plus_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/plus_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/plus_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/record_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/record_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/record_up.png
osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/ControlBar.asRevision: 14521
Revision: 14521
Author: [email protected]
Date: 2010-03-02 12:47:27 -0800 (Tue, 02 Mar 2010)
Log Message:
ChromeLibrary: moving live and recording buttons to the left hand side of the control bar, and making the button backdrops a little bigger.
Modified Paths:
osmf/trunk/libs/ChromeLibrary/assets/control bar.ai
osmf/trunk/libs/ChromeLibrary/assets/images/eject_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/fullScreenEnter_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/fullScreenLeave_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/live_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/live_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/live_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/minus_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/minus_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/minus_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/pause_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/play_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/plus_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/plus_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/plus_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityAuto_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/qualityManual_up.png
osmf/trunk/libs/ChromeLibrary/assets/images/record_disabled.png
osmf/trunk/libs/ChromeLibrary/assets/images/record_down.png
osmf/trunk/libs/ChromeLibrary/assets/images/record_up.png
osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/ControlBar.as
Maybe you are looking for
-
Hi all, I'm having a peculiar problem. I inherited a project saved in LabVIEW 8.6. The project must use of particular dll that was built a few years ago. The original developer and source code for this .dll are long gone. The very core logic exists,
-
Mythtv....i need help
so i've been building a media center pc, to finally replace my old xbox. and add pvr functionality since i'd rather not buy or rent a second pvr from my cable company. the wife hogs the other one so her schedule overlaps with some of mine. i've alway
-
ShowDocument not working with Host name in IE
I have the following applet code: try URL NodeURL = selectedNode.getNodeURL(); if (NodeURL != null) String pageName = selectedNode.getNodeURLTarget(); getAppletContext().showDocument(NodeURL,pageName); } catch (Exception e) System.out.
-
Hi, We have developed the reports for client. I want to know how the client will be able to access his reports as there are multiple users interested in executing there relevant report's. One way that i know is that the query's will be added in there
-
Integrate WebService Endpoint Aliases
Hi, i'm working with the NetWeaver04 SneakPreviewSP15. Currently i'm trying to create a callable object of type "External Service". I want to integrate a WebService. The WebService is deployed as described in the tutorial "81 Integrate a Web Service