Control reference error, for no evident reason

A module in my projects copies in an ActionScript file:
<?xml version="1.0" encoding="utf-8"?>
<mx:Canvas xmlns:mx="http://www.adobe.com/2006/mxml" width="718" height="974" backgroundColor="#FCF9EC">
    <mx:Script source="InsMenuMPEvt_MySQL.as"/>
    <mx:Script source="SqlQuery.as"/>
This ActionScript code (in InsMenuMPEvt_MySQL.as ) references an object in the module:
    switch(event.token.param){
        case "InsertMenu":
            //tiInsRetCode.text = "OK"
            if (event.result.results.error == "") {
              tiInsRetCode.text = "OK";
            else {
              tiInsRetCode.text = "NOK";                   
        break;
The compiler generates an error:
1120: Access of undefined property tiInsRetCode.    InsMenuMPEvt_MySQL.as    /Culinaria/bin-release/src    line 81    Flex Problem
although the property is defined in the module:
<mx:TextInput height="22" width="54" id="tiInsRetCode" fontWeight="normal" fontSize="10" textAlign="center"/>
This has been working for months and now for no reason that I can fathom, the compiler is generating this error and an error for every other reference to an object in a module that includes the ActionScript file.

This is getting crazier by the minute.
I've been trying everything under the sun to get rid of this problem. I have removed a different Module from the Project->Properties->Modules screen, a module that has no reference to the variable flagged as not defined and now the .as file is not generating any compile errors.
So in a nutshell:
Module A  <mx:Script source="Src.as"/>  defines a text control wiith id="x"
Module B  <mx:Script source="Src.as"/>  does not define a text control wiith id="x"
Src.as references  control wiith id="x" generating a compiler error - 1120: Access of undefined property x.    Src.as
If Module B is removed from the project's Module list there is no error!

Similar Messages

  • DMVPN and %DMVPN-3-DMVPN_NHRP_ERROR: Tunnel0: NHRP Encap Error for Resolution Request , Reason: protocol generic error (7) Error

      %DMVPN-3-DMVPN_NHRP_ERROR:  Tunnel0: NHRP Encap Error for  Resolution Request , Reason:  protocol generic error (7)
    I had pre-allocated tunnel ip's to remote spokes , some of them were implemented and put into production. Some of them got the config but the tunnel interfaces were left at shut.
    Its because of this reason that the DMVPN HUB keeps getting nhrp request from one of the inactive spokes.  Following is the sh ip nhrp extract :-
    10.x.x22/32
       Tunnel0 created 00:02:58, expire 00:00:06
       Type: incomplete, Flags: negative
       Cache hits: 7
    I just cant seem to find the spoke WAN ip to identify it. I tried debugs but just cant get it.
    From HUB:-
    Nov 30 10:36:31: %DMVPN-3-DMVPN_NHRP_ERROR:  Tunnel0: NHRP Encap Error for  Resolution Request , Reason:  protocol generic error (7) on (Tunnel: 10.x.x.1 NBMA: 20.x.x.x)
    Nov 30 10:36:32: NHRP: Send Resolution Request via Tunnel0 vrf 0, packet size: 86
    Nov 30 10:36:32:  (F) afn: IPv4(1), type: IP(800), hop: 255, ver: 1
    Nov 30 10:36:32:      shtl: 4(NSAP), sstl: 0(NSAP)
    Nov 30 10:36:32:      pktsz: 86 extoff: 52
    Nov 30 10:36:32:  (M) flags: "router auth src-stable nat ", reqid: 46113
    Nov 30 10:36:32:      src NBMA: 20.x.x.x.
    Nov 30 10:36:32:      src protocol: 10.x.x.1, dst protocol: 10.x.x.22
    Nov 30 10:36:32:  (C-1) code: no error(0)
    Nov 30 10:36:32:        prefix: 32, mtu: 17912, hd_time: 360
    Nov 30 10:36:32:        addr_len: 0(NSAP), subaddr_len: 0(NSAP), proto_len: 0, pref: 0 Nov 30 10:36:31: %DMVPN-3-DMVPN_NHRP_ERROR:  Tunnel0: NHRP Encap Error for  Resolution Request , Reason:  protocol generic error (7) on (Tunnel: 10.x.x.1 NBMA: 20.x.x.x)
    So my question is , How do i find out the spoke wan ip , so i can do something about it.  For now, its just filling up my logs on HUb router...not good ;-))

    Hello Marcin,
    If tunnel interface is shut no  NHRP activity should be going, on top, in debugs you point the hub is  sending resolution request, not receiving it.
    Agree, I expected the same, but unfortunately this is not the case. Spoke does sent out NHRP requests even with Tunnel status as admin shut.
    If your hub does not have NHS, it will not know where to send it's resolution request.
    I am still on DMVPN Phase 1, so Spokes dont talk to other spokes yet.
    Are  you positive that there is nothing that is sending packets towards  10.x.x.22 on hub side (sniffer trace of classyfing ACL on "LAN")?
    Other then a spoke, it cant be anthing, as the subnet is dedicted for tunnel interface's.
    If  you know it's not a misconfig and there is no traffic on hub side  initiated to 10.x.x.22, try removing and adding full tunnel  configuration. i.e. we want to make sure that crypto socket gets closed  and restrated.
    I can do this over weekend, but i am sure this is not going to fix the problem, reason being, that the HUB was setup before anything else and then we started migrating spokes from primary legacy gre tunnels to dmvpn tunnel as primary and legacy as a backup.
    Guess, I am still looking for the answer...Is there a WAN acl that i can use to filter the successfully migrated spokes and log the deny message as in to know what remote wan ip carries along the tunnel ip of .22 or any other debug ??

  • "Assign Access Control" returns error for essbase apps in shared services

    Hello,
    I installed and configured Oracle EPM 11.1.2 (Foundation, Essbase, Planning, Reporting&Analysis):
    OS: Windows Server 2008 Sp2 (32bit)
    Default Installation with default ports,
    Installation of all components on the same server,
    no clustering
    EPM System Diagnostic says that everything is OK.
    Now I want to assign filter access for an essbase database in the Shared Services.
    Starting the menu item "Assign Access Control" in Shared Services returns the following error:
    Error 404--Not Found
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    +10.4.5 404 Not Found+
    The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
    +....+
    Can anybody help ???
    best regards,
    Nicole

    Hello,
    here's what I found out so far:
    I get the error if I start the shared services console via the URL "http://servername:port/interop/index.jsp" and then select the "assign access control" for an essbase database.
    If I start the shared services console via the workspace everything works fine.
    Does anybody know what to do so that it also works if I start the shared services console via URL?
    best regards,
    Nicole

  • "Invalid Number" error for no apparent reason

    Hi.
    We're transferring data from one table on one DB to a data warehouse on a separate DB. All Oracle 11g running on Windows Server 2003.
    The columns all match data wise, and it's a simple select and insert.
    However, we got an ORA-01722: invalid number error on one run. We checked all the data, which was fine (all 540,000 rows) and ran it again with no error this time.
    I'd like to know if anyone knows why this would happen if there is no issue with the data validity. I'll take all guesses or known issues and check them against our systems. If anyone knows how I can get this to repeat I'd be grateful as it's all running fine now.
    Cheers
    Si

    The data is transferred using a Java program. Select into an OracleResultSet() then read each row result into a prepared statement. Were using the batch send, I believe every 100 rows.
    The source columns match the target columns for name and type, with two exceptions where the column name is slightly different but the column type still matches.
    There are not triggers on either the source or target tables.
    Cheers
    Si

  • Getting Itunes sync errors for no good reason

    Have an Ipod classic, 80 Gig and all of a sudden I'm getting the error "attempting to copy to the disk "__" failed. The disk could not be read or written to. Another error was "___ ipod" cannot be synched. The required folder cannot be found. Brought ipod to apple store and they claimed the hard drive was shot so they gave me a new one. Got home, tried to sync the new one with the same results at first. I switched the cord and it was able to sync but stopped at 753 songs and gave error that it was unable to copy songs to disk due to running out of memory. Somebody help me PLEASE!!

    If you ever had the Norton firewall even as a demo you may have to use the Norton removal tool which you should find on the Norton site.
    I have this link for it ( make sure it is OK for the version you had):
    http://service1.symantec.com/Support/tsgeninfo.nsf/docid/2005033108162039?OpenDo cument&seg=hm&lg=en&ct=us
    It's a bit of a sledge hammer to crack a nut. I used it once and had to do a repair install of iTunes to get my CD dives back.
    If you haven't tried briefly disabling the Windows firewall as a test, try that. You might need to reenable iTunes.
    It is odd if you are an administrator, as according to your diagnostics, iTunes doesn't think you are. Do you have another account you can try using?

  • AI Control gives error: 10452 occurred at AI control. Possible reasons: NI-DAQ LV no interrupt level is available for use.

    How can I run out of interrupts while accessing my DAQPad? Does
    the community have troubleshooting suggestions?

    You don't say which DAQpad. If this is a device on your parallel port then
    you will need to make sure that the parallel port has an interrupt assigned
    and not just a base address.
    Check out the following from the NI Knowledgebase:
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/bf7960eb90
    ef882a8625654e007d8b1a?OpenDocument
    Ian
    "Riverside Consulting, LLC" wrote in message
    news:[email protected]..
    > AI Control gives error: 10452 occurred at AI control. Possible
    > reasons: NI-DAQ LV no interrupt level is available for use.
    >
    > How can I run out of interrupts while accessing my DAQPad? Does
    > the community have troubleshooting suggestions?

  • I am using Lightroom 5.7, 64 bit with Windows 7 Professional. For no apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now I notice that my LR directory of folders

    I am using Lightroom 5.7, 64 bit with Windows 7 Professional. For no apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now I notice that my LR directory of folders in Library view does not show images correctly: If there is a folder with sub-folder(s), the folder will indicate 0 images, but the sub-folders show the proper number of images. What happened and is there a fix? I tried uninstalling Lightroom and re-installing, but problem persists.
    Here is a screen shot of the error message:
    Message was edited by: Joseph Costanza, Jr.

    See here for a solution.

  • Combination of GR/IR Control not allowed for External Services-SRM PO error

    Hi All,
    SRM 5.0 ECS   R/3 4.6C
    We have a service PO, for which an error Combination of GR/IR Control not allowed for External Services is being displayed.
    The PO is in error in process at this moment. And is not in R/3
    On SRM PO we have Confirm Performance of Service/Goods Receipt checked and Invoice Expected checked.
    Confirmation-Related Invoice Verification  is not checked. Any thoughts on this!!
    Thanks
    Krishna

    Hi
    <u>Please go through the following SAP OSS Notes -></u>
    Note 725824 - MB5S: Error with purchase orders for external service
    Note 781014 - Clearing values in purchase order currency are too high
    Note 991800 - MB5S: Error in delivery costs (2)
    Note 960789 - Wrong Values in MM Document for Service Based Invoice
    Note 778562 - MM-IV: invoices are entered before the goods receipt
    Note 578531 - Incorrect FM update for service purchase orders
    Note 635864 - ME2S: Invoice value is calculated incorrectly
    Note 570409 - Unplanned account assignment in invoice for service PO
    Note 545684 - MIR4 for SRV: Incorrect data displayed if deletion indicator
    Note 544567 - Transaction MIRO: incorr. default values at (parked) invoice
    Do let me know.
    Regards
    - Atul

  • Error in phase: DISASSEMBLE Reason for error: PATCH_FILE_READ_ERROR

    Hello All
    I am applying support Package: SAPKB70009 on SAP ECC 6.0 for component SAP_BASIS with release 700.
    I am getting following error
    The import was stopped, since an error occurred during the phase
    DISASSEMBLE, which the Support Package Manager is unable to resolve
    without your input.
    After you have corrected the cause of the error, continue with the
    import by choosing Support Package -> Import queue from the initial
    screen of the Support Package Manager.
    The following details help you to analyze the problem:
         -   Error in phase: DISASSEMBLE
         -   Reason for error: PATCH_FILE_READ_ERROR
         -   Return code:  12
         -   Error message: OCS Package: SAPKB70009
    Guys can you please  shed some light on how to solve this issue.

    Hi,
    There might be 2 reaons for the error.
    1) corrupted files in EPS/in  or improper CAR of the files.
    2) the file permissions in EPS/in check whether the files are having proper permssions like 775 with owner <SID>adm
    -Srini

  • Pl find out the reason for VC Cycle error for vendor 105191

    I had checked entire cycle of  Valuation Class(MM42),  Tax Code(ME12), validity period, MC Code
    in the contract as per the proforma invoice 12738 for vendor 105191  -  VC Parties, found ok.
    Pl find out the reason for VC Cycle error for vendor 105191
    " Unable to create consignment commision - FI/CO"
    " Interface : inconsistent FI/CO line item data"

    I've used the CS6 AUTOMATE|PHOTOMERGE command many times.  Today I ended up with the Error 22 message.  After reading your message I did a search on my Win7 Pro 64 bit machine and got a number of hits for "scriptingsupport.8li". 
    1 for CS6 (on my machine)
    2 for CS5 (no longer on my machine)
    2 for Elements 8 (no longer on my machine but I DO have Elements 10 & 11 on it)
    2 for CS# (no longer on my machine)
    QUESTION:  Should I delete some of these and which?  Will deletion(s) suffice?

  • Non-SysAdmins get error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.

    I have a SQL 2008 R2 system (10.50.4000) where I'm having problems connecting any user that is not a SysAdmin.  Example: I setup a new SQL Login to use Windows Authentication and grant that user db_datareader on the target database.  The user attempts
    to connect using Excel client or Access or SQL Management Studio and receives Error 18456.  The SQL Server Logs shows Error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
    The strange part is that if I temporarily grant the user the sysadmin server role then the user can connect successfully and retrieve data.  But, if I take away that sysadmin server role then the user can no longer connect but again receives the Error
    18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
    We've turned off UAC on the client machine to see if that was the problem, but no change.
    I have dropped and re-added the user's SQL Login (and the related database user login info).  No success.
    The Ring Buffers output shows:
    The Calling API Name: LookupAccountSidInternal
    API Name: LookupAccountSid
    Error Code: 0x534
    Thanks for any help.
    -Walt

    Yes, you understand correctly.  The user is logging onto a workstation (not the server) with a Windows Authenticated id.  The user is using either Excel or Access or SSMS and connecting to the server using a Windows Authenticated SQL Login account.
     If the account has sysadmin role (which is only for testing) then the connection is successful.  If I take away sysadmin role from the account then the connection is unsuccessful and the SQL Server Log shows Error
    18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
    (SQL Authentication is not an option here.  I must use Windows Authentication).
    Any other troubleshooting assistance you can offer would be appreciated.  Thanks.
    -Walt 

  • Error in SWWERRE "No personnel control record exists for accounting area 99"

    Dear Experts,
    The standard job for restarting of workflows with temporary errors , SWWERRE, has suddenly started failing.
    The message obtained in Job Log is "No personnel control record exists for accounting area 99".
    The Payroll Control Record for Payroll Area 99 does not exist as it is a non-payroll relevant area.
    There has been no change in HCM configuration or Job characteristics.
    What could have triggered these sudden failures.
    Please suggest.
    Regards,
    Shilpa A.

    Hi Shilpa
    This is not an issue with the report RSWWERRE (Job SWWERRE).
    It must be trying to pickup work items which are in Error State (temporary) - that item may have this data issue - Run Report RSWWERRE from SE38 and debug, you will come to know.
    Check if:
    1) The error WI belongs to TRIP (BUS2089)
    2) Put a break point in FORM SUB_ABRECHNUNG(SAPLHRTR) and run report RSWWERRE (if the work item is still in TEMPORARY ERROR SATE and has not converted to permanent error) ..... debugging should stop there if the above point is correct
    3) This will give you the Trip and Employee number - check if the data is consistent (BAPI_TRIP_CHECK_STATUS)
    4) This usually happens when you use &TRIP.AVSEXORADAUTHORITYLEVEL& in the binding (of the error step)
    if this is true, correct the data and it should work else delete those work items and restart the job (remember to correct the data to avoid future issues).
    If not,
    still the fist point holds true, "It must be trying to pickup items which are in Error State - that item may have the issue - Run Report RSWWERRE from SE38 and debug, you will come to know." Some errors are deep rooted and cannot be caught by the job
    Also check if note 1452535 is relevant for your release.
    Regards,
    Modak
    Message was edited by: Modak Gupta
    ............Also check thread:     ..
    http://scn.sap.com/thread/2021322

  • Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WI

    Hi, getting Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WIS 30567) amongst lots of other errors when scheduling.
    I was logged in as administrator and attempting to schedule a webi document to my self using the email option.
    thanks in advance

    Hi Trinath,
    Could you please confirm if you could save a new report as well or not; or is it specific to scheduling.
    If you are unable to save a report also then I think this is due to the path of the Input File Repository Server or its temporary directory are not pointing to the same path, and their locations are set to 2 different hard drives
    BOXI3.1 Server must use the same hard drive (local or network share) for the Input File Repository Server and its temporary directory.
    - Shahnawaz

  • Open Enrollment error for US - No correct adjustment reason specified

    Hi,
    We are getting this error "Open Enrollment error for US - No correct adjustment reason specified". Please help if you know the resolution to this.
    Regards,
    Anand Jalan

    I have found the solution for this.
    Maintain the Open enrollment period dates in IMG->Personnel administartion -> Benefits ->Flexible administration->Define Administrative Parameters

  • Can you use a control reference for a graph with two channels of data?

    when i try to wire a 2-D array of data to the value property of a graph(strict control reference), it shows a conflict. The value data type only shows up as accepting a 1-D array input. I want to use control references to pass the chart data to my main vi. Will I have to change the waveform graph control reference into an array control reference to make this work?? This would require adding a while loop in the main vi to read the array data and update the graph data??

    > when i try to wire a 2-D array of data to the value property of a
    > graph(strict control reference), it shows a conflict. The value data
    > type only shows up as accepting a 1-D array input. I want to use
    > control references to pass the chart data to my main vi. Will I have
    > to change the waveform graph control reference into an array control
    > reference to make this work?? This would require adding a while loop
    > in the main vi to read the array data and update the graph data??
    I think the problem is that your waveform graph is set to take one type,
    a 1D array of doubles, and you are wiring a different type. While
    charts adapt to type when the data is wired to their terminal, they do
    not adapt to data wired to their value property. If you change the
    datatype of the graph from its terminal, then you should see the value
    property change type also and you are set.
    Greg McKaskle

Maybe you are looking for

  • Pass a list of number values to a pl/sql function

    I would like to pass a list of number values to a pl/sql function where the list will be used in an IN clause. Ideally I would like to do the following: CREATE OR REPLACE FUNCTION ( dept_list in varchar2) is begin select ... where dept in (dept_list)

  • Loading all classes on classpath

    Hello! I'm trying to create some kind of "Package browser" which I can use for selecting a class that exists on the classpath. I've come up with a solution that reads the classpath property and then looks up the classes by searching each directory an

  • I can not upgrade from CS 5.5 to CS 6

    I hope there is someone who can help me with the following issue. Yesterday I bought 5 license numbers for upgrade from Adobe Design Premium CS 5.5 to CS 6. But I can't update. I hope that anyone can help me. Het won't accepted my old serialcode.

  • Indesign cs5 and photoshop cs5 preferences installed as one.

    I have Indesign cs5 and adobe photoshop cs5 extended installed in my copmputer. I see those two programs as the largest installed applications in my computer. I just wonder that maybe some of the preferences of Indesign cs5 and photoshop cs5 are the

  • BAPI or Module Function to retrieve PO attachment

    Hi, i want to retrieve and display the PO attachment list and PO attachment . I can retrieve all PO Informations(PO Header, , Item ,...), via table EKKO and EKPO but i couldn't retrieve and display PO attachment. The attachment is created via the ME2