Control Strip in OS 9 won't start

I recently bought a 867 TiBook because I needed a faster notebook which would also boot into OS 9 for kids games. When booted into 9, the control strip will not start. I've replaced both the control panel and extension but with no success. My next step is Conflict Catcher, but I'm hoping for an easy answer.
Thanks

I always found the Control Strip to be less than dependable at the best of times, and actively and annoyingly troublesome the rest of the time. You can't do anything with the CS that can't be done with a Control Panel. Could you simply get along without the CS? I think it might save you some headaches.

Similar Messages

Start up pause/hang before loading A-Dock and Control Strip

Ok, I know, running a sooped up 7200 PowerMac is not worth the time or money, but...I've got this hang that's become more pronounced lately.
Everything seems to load fine. After about 3-5 minutes A-Dock and Control Strip come one. Already tried disabling both, no luck. That's why I think the mouse is the problem. Logitech Wheel mouse works but not to full functionality (gonna try USB Overdrive); Mouseware 4.0.6 now installed but seems flaky (RH and wheel button work intermittantly, usually after replugging in the USB), and can't seem to locate the install CD which had an earlier version. May also try the serial mouse again too.
Mouse also hangs in some browsers and seems to cause crashes.
I've got a SCSI external drive (IDE 6) and terminated.
I'll do more testing, but would appreciate any obvious fixes
Thanks in advance

Do you have the problem if you start up with Extensions Off?
A problem on the SCSI bus can cause your problem. Disconnect all external devices except kbd, mouse & monitor and see if you have the same problem.
Not sure it will help, but won't hurt to zap PRAM also.
Cheers, Tom

11g DB Control service won't start on Win XP Pro

Hi all,
In installing my 11g database, the DB Control service won't start so the database config fails prior to doing the EM stuff. The system event viewer says:
The OracleDBConsoleorcl11p1 service terminated with service-specific error 2 (0x2).
Querying further, I find the following:
SERVICE_NAME: OracleDBConsoleorcl11p1
TYPE : 10 WIN32_OWN_PROCESS
STATE : 1 STOPPED
(NOT_STOPPABLE,NOT_PAUSABLE,IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 1066 (0x42a)
SERVICE_EXIT_CODE : 2 (0x2)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
Researching the error code 1066 simply says it is a vendor-specific error code. Anyone out there ever come across such a thing?
Cheers,
Jim Greetham

Jim,
Were you able to figure out the problem why you were getting 'service specific error occurred:2'?
I have the same issue.
DB version: 11.1.0.6.0
OS: Win XP (latest patches and updates applied)
The database and other pieces are working just fine.
Thank you,
Taj

[SOLVED] PulseAudio Volume Control won't start anymore

Hi!
As described in the title, PulseAudio Volume Control won't start from one day to another.
I have no clue where this could come from or what I could have done wrong to create this issue.
Here is how it looks like:
When I start it, it seems to be loading but after some time it just disappears and nothing happens.
I also have the same looking issue with KMix and Google Music Manager.
Do any of you have an idea where this could be coming from?
Thanks for your help :-)
Last edited by StefanMu (2014-01-10 01:15:24)

Rasi wrote:StefanMu, you are not giving enough details. Have there been any updates, that are pulse or gtk related. What versions do you have installed of gtk, gtkmm, libpulse, pavucontrol. Are all of those repository packages, or is something built from AUR? Any custom repositories?
Hi, and thanks for your reply. Here are the details:
gtk:
[root@ACDCROCKS-ARCH_LINUX miniclip22]# pacman -Qi gtk
Name : gtk
Version : 1.2.10-13
Description : GTK+ is a multi-platform toolkit (v1)
gtkmm:
[root@ACDCROCKS-ARCH_LINUX miniclip22]# pacman -Qi gtkmm
Name : gtkmm
Version : 2.24.4-1
Description : C++ bindings for gtk2
Architecture : x86_64
URL : [url]http://www.gtkmm.org/[/url]
libpulse:
[root@ACDCROCKS-ARCH_LINUX miniclip22]# pacman -Qi libpulse
Name : libpulse
Version : 4.0-6
Description : A featureful, general-purpose sound server (client library)
Architecture : x86_64
pavucontrol:
[root@ACDCROCKS-ARCH_LINUX miniclip22]# pacman -Qi pavucontrol
Name : pavucontrol
Version : 2.0-2
Description : A GTK volume control for PulseAudio
Architecture : x86_64
They are all repository packages, NOT from the AUR. As previously mentioned, this is a fresh install, so I don't have any custom repositories. Any help is appreciated. Thanks in advance!
Last edited by miniclip22 (2013-12-28 18:42:12)

Need help--Classic won't start

I still have a couple of OLD apps that require System 9. When I attempt to open either of them I get the "Classic is starting" progress bar, but it never quite finishes. I can start Classic okay with extensions off but then I can't use the printer, and my old copy of Photoshop Elements won't load no matter what I try. I get an error message when I try to run "Install Applications and Classic Support" from my installation disk. I really don't want to part with the $$ for System 10.4 AND two new pieces of software right now. Any ideas?

If Classic is booting with extensions off, that means that some preference or extension or control panel or control strip module has a problem. You can use Extensions Manager to turn off most of them and start up and see if the problem recurs. If so, then one of the extensions etc that you didn't turn off is the problem. If not, then one of those you did turn off is the problem. If you still have the problem, make a note of the extensions you've already turned off, and turn off a few more and try again. If you don't have the problem, turn on a few extensions and try again. Repeat until you have identified the problem extension.

SAP won't start after recabeling sap system

Hi, 
 
I have recently recabled my sap system (from wireless to wired) and now my sap instance won't start anymore. The weird thing is that nothing major was changed. When i read the logs from the work directory it seems it cannot load dbsdbslib.dll. I have updated to the latest version of the kernel and maxdb (kernel=7.00 patch 221, maxdb=7.6.06.07) and i made very sure i got the right kernel (NT AMD64). I also checked the environment settings for the <sid>adm user. The weird part is that it seems SAP cannot connect to the database, but the databse starts just fine and r3trans -d also returns no errors. Does anyone have an idea what could be wrong? 
 
Kind regards, 
Bas 
 
 
trc file: "dev_disp", trc level: 2, release: "700" 
 
 
command line arg 0: D:\usr\sap\IDE\DVEBMGS00\exe\disp+work.EXE 
command line arg 1: pf=D:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sap 
 
ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll") 
Error 126 = "The specified module could not be found." [dlnt.c 255] 
sysno 00 
sid IDE 
systemid 562 (PC with Windows NT) 
relno 7000 
patchlevel 0 
patchno 221 
intno 20050900 
make: multithreaded, Unicode, 64 bit, optimized 
pid 3252 
 
kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC) 
length of sys_adm_ext is 576 bytes 
SWITCH TRC-HIDE on *** 
***LOG Q00=> DpSapEnvInit, DPStart (00 3252) [dpxxdisp.c 1287] 
ShmProtect( 5, 3 ) 
SigIInit: ok (whoami=1) 
Thread handle for mainthread created 
SigIRegisterRoutine: handler for signal 11 installed (SigISegv) 
Pipe created:
.\pipe\SAP3252 
SigIInit: Create Message Thread 
SigIRegisterExitRoutine: exithandler installed (DpHalt) 
SigIRegisterTerminateRoutine: terminatehandler installed (DpHalt) 
 shared lib "dw_xml.dll" version 221 successfully loaded 
 shared lib "dw_xtc.dll" version 221 successfully loaded 
 shared lib "dw_stl.dll" version 221 successfully loaded 
 shared lib "dw_gui.dll" version 221 successfully loaded 
 shared lib "dw_mdm.dll" version 221 successfully loaded 
dp_loc_queue_max_blk: 40000 
mshost: >sap< 
DpSetCancelStrat: set timeout 0 at level 0 
DpSetCancelStrat: set timeout 5 at level 1 
DpSetCancelStrat: set timeout -1 at level 2 
DpSetCancelStrat: set timeout -1 at level 3 
rdisp/softcancel_sequence : -> 0,5,-1 
softcancel_sequence: >0,5,-1< 
use internal message server connection to port 3900 
msserv: >3900< 
dp_bufreftime: 120 sec 
dp_btctime: 60 sec 
dp_autoabaptime: 300 sec 
dp_autothtime: 60 sec 
dp_autojavatime: 300 sec 
dp_vm_alarm_time: 100 msec 
dp_calldelayed_time: 60 sec 
dp_startup_time: 20 
dp_noptime: 0 sec 
dp_keepalive: 1200 sec 
dp_keepalive_timeout: 60 sec 
dp_ms_keepalive: 60 sec 
dp_ms_keepalive_timeout: 300 sec 
switch off dp-keep-alive for old temus 
dp_gui_auto_logout: 0 sec 
dp_spoolalrm: 60 sec 
dp_softcancel_timeout: 5 sec 
rdisp/wp_restart_interval : 300 sec 
DpISetTrcLog: trc logging active, max size = 20971520 bytes 
dp_rfc_check_active: 1 
dp_rfc_check_all_rfcs: 0 
dp_http_check: 1 
check_master_slave: 0 
NiHsLGetServNo: got service name 'sapdp00' from operating system 
NiIGetServNo: servicename 'sapdp00' = port 0C.80/3200 
NiHsLGetServNo: got service name 'sapgw00' from operating system 
NiIGetServNo: servicename 'sapgw00' = port 0C.E4/3300 
NiIMyHostName: hostname = 'sap' 
NiHsLGetNodeAddr: got hostname 'sap' from operating system 
NiIGetNodeAddr: hostname 'sap' = addr 192.168.2.250 
NiHsLGetHostName: found address 192.168.2.250 in cache 
NiIGetHostName: addr 192.168.2.250 = hostname 'sap' (fq) 
Mon Oct 26 16:14:29 2009 
NiHsLGetNodeAddr: hostname 'www.doesnotexist0190.qqq.nxst' not found by operating system 
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0190.qqq.nxst) took 12 seconds 
Mon Oct 26 16:14:45 2009 
NiHsLGetHostName: address 1.0.0.1 not found by operating system 
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 16 seconds 
NiHsLGetServNo: got service name 'http' from operating system 
NiIGetServNo: servicename 'http' = port 00.50/0080 
NiHsLGetServName: port 1F.90/8080 not found by operating system 
NiHsLGetServName: port FC.2B/64555 not found by operating system 
NiHsLGetServNo: service name 'sapdp9988' not found by operating system 
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5521] 
SigIRegisterRoutine: handler for signal 16 installed (DpTrcOnOff) 
SigIRegisterRoutine: handler for signal 17 installed (DpTrcOnOff) 
SigIRegisterRoutine: alarm handler installed (DpSigAlrm) 
SigIRegisterRoutine: handler for signal 2 installed (DpSigInt) 
SigIRegisterRoutine: handler for signal 15 installed (DpSigInt) 
SigIRegisterRoutine: handler for signal 3 installed (DpSigQuit) 
MtxInit: 30000 0 0 
DpInitMtx: MtxInit o.k. 
PPID environment not found 
Thread handle for mainthread created 
SigIRegisterRoutine: handler for signal 19 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 18 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 24 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 0 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 21 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 22 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 23 installed (DpSigPrivDisp) 
SigIRegisterRoutine: handler for signal 25 installed (DpSigPrivDisp) 
 
 
trc file: "dev_w0", trc level: 2, release: "700" 
 
* 
ACTIVE TRACE LEVEL 2
ACTIVE TRACE COMPONENTS all, MJ
M
M command line arg 0: D:\usr\sap\IDE\DVEBMGS00\exe\disp+work.EXE
M command line arg 1: pf=D:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sap
M command line arg 2: wp_id=0
M
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - LoadLibrary("D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll")
Error 126 = "The specified module could not be found." [dlnt.c 255]
B *** ERROR => Couldn't load library 'D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll'
[dbcon.c 4905]
M sysno 00
M sid IDE
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 221
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 4000
M
M kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4000) [dpxxdisp.c 1349]
M Mon Oct 26 16:14:47 2009
M SigIInit: ok (whoami=2)
M Thread handle for mainthread created
M SigIRegisterRoutine: handler for signal 11 installed (SigISegv)
M Pipe created:
.\pipe\SAP4000
M SigIInit: Create Message Thread
M SigIRegisterExitRoutine: exithandler installed (wp_halt)
M SigIRegisterTerminateRoutine: terminatehandler installed (wp_halt)
M SigIRegisterRoutine: handler for signal 16 installed (DpTrcOnOff)
M SigIRegisterRoutine: handler for signal 17 installed (DpTrcOnOff)
M SigIRegisterRoutine: alarm handler installed (DpSigAlrm)
M SigIRegisterRoutine: handler for signal 2 installed (DpSigInt)
M SigIRegisterRoutine: handler for signal 15 installed (DpSigInt)
M SigIRegisterRoutine: handler for signal 3 installed (DpSigQuit)
I MtxInit: 30000 0 0
M DpInitMtx: MtxInit o.k.
M WaitParent Thread 3252 start
M WaitParent Thread 3252 created
M Thread handle for mainthread created
M SigIRegisterRoutine: handler for signal 19 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 18 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 24 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 0 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 21 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 22 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 23 installed (DpSigPrivDisp)
M SigIRegisterRoutine: handler for signal 25 installed (DpSigPrivDisp)
 
 
trc file: "trans.log" 
 
 
4 ETW000 r3trans version 6.14 (release 700 - 12.06.09 - 15:20:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 21.10.2009 - 15:06:04
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Oct 21 15:06:06 2009 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dbsdbslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] DlLoadLib success: LoadLibrary("dbsdbslib.dll"), hdl 0, addr 0000000188C00000
4 ETW000 7580 0.007580
4 ETW000 [dev trc ,00000] using "D:\usr\sap\IDE\SYS\exe\uc\NTAMD64\dbsdbslib.dll" 16 0.007596
4 ETW000 [dev trc ,00000] Library 'dbsdbslib.dll' loaded 19 0.007615
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbsdbslib.dll 38 0.007653
4 ETW000 [dev trc ,00000] Version of 'dbsdbslib.dll' is "700.08", patchlevel (0.211) 307 0.007960
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbsdbslib.dll 26 0.007986
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbsdbslib.dll 24 0.008010
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 46 0.008056
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=39,arg_p=0000000000000000) 21 0.008077
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 15 0.008092
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000003B4F920) 20 0.008112
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 15 0.008127
4 ETW000 [dev trc ,00000] New connection 0 created 17 0.008144
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 50 0.008194
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000001A01768) 31 0.008225
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 17 0.008242
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 13 0.008255
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 16 0.008271
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO

Edited by: B. v. d. Lienden on Oct 26, 2009 5:18 PM

<div class=Section1>
Natalia,
 
To answer your questions:
1. Did you create the SAP ticket, where this problem is
reported?
I didn't report it to SAP because it is just an IDES test
system. I can easily do a reinstall, but i would like to know the cause and
solution to this problem.
 
2. Do you have dbsdbslib.dll at this location? What version?
Yes, i have the dbsdbslib.dll at location
D:\usr\sap\IDE\DVEBMGS00\exe and also D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
Version is 7000.221.16.41497 (kernel 7.00 SP 221)
 
your requested output:
 
----

disp+work information
----

 
kernel releaseu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700
 
kernel make variantu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700_REL
 
compiled onu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 NT 5.2 3790 Service Pack 2 x86
MS VC++ 14.00
 
compiled foru00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 64 BIT
 
compilation modeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 UNICODE
 
compile timeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 Aug 23 2009 23:15:57
 
update level u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A00
 
patch numberu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 221
 
source idu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0.221
 
 
----

supported environment
----

 
database (SAP, table SVERS)u00A0u00A0 700
u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\ideadm\Application Data
CLIENTNAME=BSF02
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
COMPUTERNAME=SAP
ComSpec=C:\WINDOWS\system32\cmd.exe
DBMS_TYPE=ada
DIR_LIBRARY=D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
DIR_PROFILE=D:\usr\sap\IDE\SYS\profile
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\ideadm
JAVA_HOME=C:\j2sdk1.4.2_21-x64
LOGONSERVER=
SAP
NUMBER_OF_PROCESSORS=2
OS=Windows_NT
Path=D:\sapdb\programs\bin;D:\sapdb\programs\pgm;C:\j2sdk1.4.2_21-x64\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program
Files\Intel\DMIX;D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=EM64T Family 6 Model 15 Stepping 13,
GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0d
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
PROMPT=$P$G
SAPEXE=D:\usr\sap\IDE\SYS\exe\uc\NTAMD64
SAPLOCALHOST=sap
SAPSYSTEMNAME=IDE
SESSIONNAME=RDP-Tcp#47
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\WINDOWS\TEMP\2
TMP=C:\WINDOWS\TEMP\2
USERDOMAIN=SAP
USERNAME=ideadm
USERPROFILE=C:\Documents and Settings\ideadm
windir=C:\WINDOWS
 
----

disp+work information
----

 
kernel releaseu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700
 
kernel make variantu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 700_REL
 
compiled onu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 NT 5.2 3790 Service Pack 2 x86
MS VC++ 14.00
 
compiled foru00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 64 BIT
 
compilation modeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 UNICODE
 
compile timeu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 Aug 23 2009 23:15:57
 
update levelu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0
 
patch numberu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 221
 
source idu00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 0.221
 
 
----

supported environment
----

 
database (SAP, table SVERS)u00A0u00A0 700
u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0u00A0 
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
 
 
</div>

All of a sudden Photoshop won't start [on a Macbook Air]

Dear all,
I'm on a MacBook Air with OS X 10.10.2, and I use Photoshop about once a month, but now I really need it, and it won't start:
- Immediately after I click on the Photoshop icon I get "Adobe Photoshop CS5.1 cannot be opened because of a problem." And when I click on the "Report..." button I get a very technical message (see below).
- I've used Photoshop on this machine for about a year with no problem, but recently I had a problem and needed to restore from my TimeMachine backup.
- I don't know if the problem occurred immediately after the restore or not.
- I've read innumerable threads on various forums, but nothing describes my problem exactly. I suspect a problem with my paths and permissions (since I read a report that restoring from a TimeMachine causes such problems occasionally), but I don't know which path is corrupted/missing/unreadable.
- I've tried creating a new admin account and starting Photoshop from there. It didn't work.
- I don't mind reinstalling, but I don't have an installer image. I started with Photoshop 6, then updated to CS2, CS4 and eventually CS5. I do have all the serial numbers but not all update-images.
I would appreciate any hints on how to further diagnose and some the problem.
Thanks a lot in advance!
Bojidar
And now here is my exact error message:
Process: Adobe Photoshop CS5.1 [12426]
Path: /Applications/Bildbearbeitung/*/Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1
Identifier: com.adobe.Photoshop
Version: ???
Code Type: X86-64 (Native)
Parent Process: ??? [1]
Responsible: Adobe Photoshop CS5.1 [12426]
User ID: 501
Date/Time: 2015-05-03 21:53:39.840 +0200
OS Version: Mac OS X 10.10.1 (14B25)
Report Version: 11
Anonymous UUID: A0DC6EA7-1973-1B68-EFC7-5D60106F084D
Sleep/Wake UUID: 1FA6367C-EEB2-4F46-8773-EBB176EAEAC7
Time Awake Since Boot: 230000 seconds
Time Since Wake: 2900 seconds
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/adobe_caps.framework/Versions/A/adobe_caps
Referenced from: /Applications/Bildbearbeitung/*/Adobe Photoshop CS5.1.app/Contents/MacOS/Adobe Photoshop CS5.1
Reason: image not found
Binary Images:
 0x7fff6f1c1000 - 0x7fff6f1f7837 dyld (353.2.1) <4696A982-1500-34EC-9777-1EF7A03E2659> /usr/lib/dyld
Model: MacBookAir6,2, BootROM MBA61.0099.B18, 2 processors, Intel Core i5, 1.3 GHz, 4 GB, SMC 2.13f15
Graphics: Intel HD Graphics 5000, Intel HD Graphics 5000, Built-In
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x80AD, 0x483943434E4E4E384A544D4C41522D4E544D
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x117), Broadcom BCM43xx 1.0 (7.15.124.12.10)
Bluetooth: Version 4.3.1f2 15015, 3 services, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM0256F, 251 GB
USB Device: Internal Memory Card Reader
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Air, Apple Inc., 23.6

Did tou try resetting the preferences usins the Photoshop keys as your tryind to start Photoshop. Toy cab also use Windows explored or Mac finder deleteor rename you userid Photoshop preferende if you change you OS preferences to be able to see hiddeb files and folders. Do you read the link I posted?
Restore preference files to default
In this video, learn the two methods of resetting your preference files back to default: Manual preference file removal and Keyboard Shortcut method (starts at 5:05)
by Julieanne Kost
To restore preferences quickly using a keyboard short cut:
Press and hold Alt+Control+Shift (Windows) or Option+Command+Shift (Mac OS) as you start Photoshop. You are prompted to delete the current settings. The new preferences files are created the next time you start Photoshop.
Note: Using the keyboard shortcut, preference files for custom shortcuts, workspaces, and color setings will also be reset to default.

X11 won't start

Ever since upgrading to Leper, X11 won't start. If I open the console window, the following is logged repetitively, which looks like an invalid start command that is followed by command line help. Anybody know what I can do to fix this?
Console output:
7/16/08 10:14:06 PM org.x.X11[404] X11.app = /usr/X11/X11.app/Contents/MacOS/X11
7/16/08 10:14:06 PM org.x.X11[404] Unrecognized option: -launchd
7/16/08 10:14:06 PM org.x.X11[404] use: X [:<display>] [option]
7/16/08 10:14:06 PM org.x.X11[404] -a # mouse acceleration (pixels)
7/16/08 10:14:06 PM org.x.X11[404] -ac disable access control restrictions
7/16/08 10:14:06 PM org.x.X11[404] -audit int set audit trail level
7/16/08 10:14:06 PM org.x.X11[404] -auth file select authorization file
7/16/08 10:14:06 PM org.x.X11[404] -br create root window with black background
7/16/08 10:14:06 PM org.x.X11[404] +bs enable any backing store support
7/16/08 10:14:06 PM org.x.X11[404] -bs disable any backing store support
7/16/08 10:14:06 PM org.x.X11[404] -c turns off key-click
7/16/08 10:14:06 PM org.x.X11[404] c # key-click volume (0-100)
7/16/08 10:14:06 PM org.x.X11[404] -cc int default color visual class
7/16/08 10:14:06 PM org.x.X11[404] -co file color database file
7/16/08 10:14:06 PM org.x.X11[404] -core generate core dump on fatal error
7/16/08 10:14:06 PM org.x.X11[404] -dpi int screen resolution in dots per inch
7/16/08 10:14:06 PM org.x.X11[404] dpms enables VESA DPMS monitor control
7/16/08 10:14:06 PM org.x.X11[404] -dpms disables VESA DPMS monitor control
7/16/08 10:14:06 PM org.x.X11[404] -deferglyphs [none|all|16] defer loading of [no|all|16-bit] glyphs
7/16/08 10:14:06 PM org.x.X11[404] -f # bell base (0-100)
7/16/08 10:14:06 PM org.x.X11[404] -fc string cursor font
7/16/08 10:14:06 PM org.x.X11[404] -fn string default font name
7/16/08 10:14:06 PM org.x.X11[404] -fp string default font path
7/16/08 10:14:06 PM org.x.X11[404] -help prints message with these options
7/16/08 10:14:06 PM org.x.X11[404] -I ignore all remaining arguments
7/16/08 10:14:06 PM org.x.X11[404] -ld int limit data space to N Kb
7/16/08 10:14:06 PM org.x.X11[404] -lf int limit number of open files to N
7/16/08 10:14:06 PM org.x.X11[404] -ls int limit stack space to N Kb
7/16/08 10:14:06 PM org.x.X11[404] -nolock disable the locking mechanism
7/16/08 10:14:06 PM org.x.X11[404] -logo enable logo in screen saver
7/16/08 10:14:06 PM org.x.X11[404] nologo disable logo in screen saver
7/16/08 10:14:06 PM org.x.X11[404] -nolisten string don't listen on protocol
7/16/08 10:14:06 PM org.x.X11[404] -noreset don't reset after last client exists
7/16/08 10:14:06 PM org.x.X11[404] -reset reset after last client exists
7/16/08 10:14:06 PM org.x.X11[404] -p # screen-saver pattern duration (minutes)
7/16/08 10:14:06 PM org.x.X11[404] -pn accept failure to listen on all ports
7/16/08 10:14:06 PM org.x.X11[404] -nopn reject failure to listen on all ports
7/16/08 10:14:06 PM org.x.X11[404] -r turns off auto-repeat
7/16/08 10:14:06 PM org.x.X11[404] r turns on auto-repeat
7/16/08 10:14:06 PM org.x.X11[404] -render [default|mono|gray|color] set render color alloc policy
7/16/08 10:14:06 PM org.x.X11[404] -s # screen-saver timeout (minutes)
7/16/08 10:14:06 PM org.x.X11[404] -sp file security policy file
7/16/08 10:14:06 PM org.x.X11[404] -su disable any save under support
7/16/08 10:14:06 PM org.x.X11[404] -t # mouse threshold (pixels)
7/16/08 10:14:06 PM org.x.X11[404] -terminate terminate at server reset
7/16/08 10:14:06 PM org.x.X11[404] -to # connection time out
7/16/08 10:14:06 PM org.x.X11[404] -tst disable testing extensions
7/16/08 10:14:06 PM org.x.X11[404] ttyxx server started from init on /dev/ttyxx
7/16/08 10:14:06 PM org.x.X11[404] v video blanking for screen-saver
7/16/08 10:14:06 PM org.x.X11[404] -v screen-saver without video blanking
7/16/08 10:14:06 PM org.x.X11[404] -wm WhenMapped default backing-store
7/16/08 10:14:06 PM org.x.X11[404] -wr create root window with white background
7/16/08 10:14:06 PM org.x.X11[404] -x string loads named extension at init time
7/16/08 10:14:06 PM org.x.X11[404] -maxbigreqsize set maximal bigrequest size
7/16/08 10:14:06 PM org.x.X11[404] +xinerama Enable XINERAMA extension
7/16/08 10:14:06 PM org.x.X11[404] -xinerama Disable XINERAMA extension
7/16/08 10:14:06 PM org.x.X11[404] -dumbSched Disable smart scheduling, enable old behavior
7/16/08 10:14:06 PM org.x.X11[404] -schedInterval int Set scheduler interval in msec
7/16/08 10:14:06 PM org.x.X11[404] +extension name Enable extension
7/16/08 10:14:06 PM org.x.X11[404] -extension name Disable extension
7/16/08 10:14:06 PM org.x.X11[404] -query host-name contact named host for XDMCP
7/16/08 10:14:06 PM org.x.X11[404] -broadcast broadcast for XDMCP
7/16/08 10:14:06 PM org.x.X11[404] -multicast [addr [hops]] IPv6 multicast for XDMCP
7/16/08 10:14:06 PM org.x.X11[404] -indirect host-name contact named host for indirect XDMCP
7/16/08 10:14:06 PM org.x.X11[404] -port port-num UDP port number to send messages to
7/16/08 10:14:06 PM org.x.X11[404] -from local-address specify the local address to connect from
7/16/08 10:14:06 PM org.x.X11[404] -once Terminate server after one session
7/16/08 10:14:06 PM org.x.X11[404] -class display-class specify display class to send in manage
7/16/08 10:14:06 PM org.x.X11[404] -cookie xdm-auth-bits specify the magic cookie for XDMCP
7/16/08 10:14:06 PM org.x.X11[404] -displayID display-id manufacturer display ID for request
7/16/08 10:14:06 PM org.x.X11[404] -kb disable the X Keyboard Extension
7/16/08 10:14:06 PM org.x.X11[404] +kb enable the X Keyboard Extension
7/16/08 10:14:06 PM org.x.X11[404] [+-]accessx [ timeout [ timeout_mask [ feedback [ options_mask] ] ] ]
7/16/08 10:14:06 PM org.x.X11[404] enable/disable accessx key sequences
7/16/08 10:14:06 PM org.x.X11[404] -ardelay set XKB autorepeat delay
7/16/08 10:14:06 PM org.x.X11[404] -arinterval set XKB autorepeat interval
7/16/08 10:14:06 PM org.x.X11[404] Device Dependent Usage:
7/16/08 10:14:06 PM org.x.X11[404] -fakebuttons : fake a three button mouse with Command and Option keys.
7/16/08 10:14:06 PM org.x.X11[404] -nofakebuttons : don't fake a three button mouse.
7/16/08 10:14:06 PM org.x.X11[404] -fakemouse2 <modifiers> : fake middle mouse button with modifier keys.
7/16/08 10:14:06 PM org.x.X11[404] -fakemouse3 <modifiers> : fake right mouse button with modifier keys.
7/16/08 10:14:06 PM org.x.X11[404] ex: -fakemouse2 "option,shift" = option-shift-click is middle button.
7/16/08 10:14:06 PM org.x.X11[404] -keymap <file> : read the keymapping from a file instead of the kernel.
7/16/08 10:14:06 PM org.x.X11[404] -version : show the server version.
7/16/08 10:14:06 PM org.x.X11[404] Quartz modes:
7/16/08 10:14:06 PM org.x.X11[404] -fullscreen : run full screen in parallel with Mac OS X window server.
7/16/08 10:14:06 PM org.x.X11[404] -rootless : run rootless inside Mac OS X window server.
7/16/08 10:14:06 PM org.x.X11[404] -quartz : use default Mac OS X window server mode
7/16/08 10:14:06 PM org.x.X11[404] Options ignored in rootless mode:
7/16/08 10:14:06 PM org.x.X11[404] -size <height> <width> : use a screen resolution of <height> x <width>.
7/16/08 10:14:06 PM org.x.X11[404] -depth <8,15,24> : use this bit depth.
7/16/08 10:14:06 PM org.x.X11[404] -refresh <rate> : use a monitor refresh rate of <rate> Hz.
7/16/08 10:14:06 PM org.x.X11[404] Fatal server error:
7/16/08 10:14:06 PM org.x.X11[404] Unrecognized option: -launchd
7/16/08 10:14:06 PM org.x.X11[404] AbortDDX
7/16/08 10:14:06 PM org.x.X11[404] Quitting Xquartz...
7/16/08 10:14:18 PM com.apple.launchd[101] (org.x.X11[404]) Exited with exit code: 1

I too am having this problem. People are all reporting different causes.
The cause might be solved by this solution at MacOSXHints.com
http://www.macosxhints.com/article.php?story=20080622105055862
They sugguest removing the -launchd boot option from your Xorg plist file. I did this and it did not fix the problem for me, I still get the Unrecognized option: -launchd. But other users have reported success, so it's worth a shot.
You might also look into what the guys in this thread (http://discussions.apple.com/thread.jspa?threadID=1402209&tstart=205) did to try to solve launching problems.

Adobe Photoshop CS5.1 won't start on my computer

Adobe Photoshop CS5.1 won't start on my computer I use windows XP.
Whenever I try to open the Photoshop I get a message "Adobe Photoshop CS5.1 has encountered a problem and needs to close. We are sorry for the inconvenience."
and at the bottom of the message "to see what data this error report contains, click here.
so I clicked, and that is what I got:
Error signature:
AppName: photoshop.exe
AppVer: 12.1.0.0
ModName: scriptingsupport.8li
ModVer: 10.0.0.0
Offset: 000d1a2e
I tried removing the program and re-installing, the same thing happened.
I would appreiciate any help.
Thanks.

Lalala8989898989 wrote:
AppName: photoshop.exe
AppVer: 12.1.0.0
ModName: scriptingsupport.8li
ModVer: 10.0.0.0
Offset: 000d1a2e
The ScriptingSupport.8li that comes with Photoshop CS5.1 should have the module version 12.1.0.0 as well.
It sounds as if you have done something where you have mixed modules from an older version of Photoshop (CS3) into those that Photoshop CS5 is enumerating during startup.
Did you, by chance, copy the entire contents of a folder (e.g. plug-ins or scripts) and get extra files you didn't intend?
Have you set an Extra plug-ins folder up to point to the plug-ins for an earlier version of Photoshop?
Mixing up versions of Photoshop is a no-no.
You may want to start by clearing your Photoshop preferences... Press and hold Control - Shift - Alt immediate after cold-starting Photoshop. If you're quick enough, and you have to be VERY quick to get the keys down, it will prompt you to confirm deletion of the preferences it already has set up, which will then cause it to use defaults.
-Noel

[SOLVED] RStudio won't start

I've tried to install latest RStudio with yaourt -S rstudio-desktop-bin
$ sudo pacman -Q rstudio-desktop-bin
rstudio-desktop-bin 0.98.1103-1
The installation worked without any issues, but the problem is that RStudio simply won't start. When I try to run it via KDE5's kickoff, it shows for a few seconds in the task manager, but then without any prompt or error, it simply disappears from there.
I don't know how to run it with Konsole for some potential error output:
$ rstudio
bash: rstudio: command not found
$ rstudio-desktop-bin
bash: rstudio-desktop-bin: command not found
Last edited by JonnyRobbie (2015-05-04 01:01:37)

Yep, pretty much exactly the same output:
$ file /usr/lib/rstudio/bin/rstudio
/usr/lib/rstudio/bin/rstudio: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.15, BuildID[sha1]=dc879dc63116a0dc7f0d877f3525bdfea9ace076, stripped
The strace stderr is quite long this is the result of $ strace rstudio-bin 2> ~/Documents/strace_rstudio.log:
execve("/usr/bin/rstudio-bin", ["rstudio-bin"], [/* 64 vars */]) = 0
brk(0) = 0x1483000
readlink("/proc/self/exe", "/usr/lib/rstudio/bin/rstudio", 4096) = 28
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/usr/lib/rstudio/bin/tls/x86_64/libQtWebKit.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/usr/lib/rstudio/bin/tls/x86_64", 0x7ffe83ffb890) = -1 ENOENT (No such file or directory)
open("/usr/lib/rstudio/bin/tls/libQtWebKit.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/usr/lib/rstudio/bin/tls", 0x7ffe83ffb890) = -1 ENOENT (No such file or directory)
open("/usr/lib/rstudio/bin/x86_64/libQtWebKit.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/usr/lib/rstudio/bin/x86_64", 0x7ffe83ffb890) = -1 ENOENT (No such file or directory)
open("/usr/lib/rstudio/bin/libQtWebKit.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
stat("/usr/lib/rstudio/bin", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=245656, ...}) = 0
mmap(NULL, 245656, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f0385b00000
close(3) = 0
open("/usr/lib/libQtWebKit.so.4", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\7>\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=35918296, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385aff000
mmap(NULL, 38192608, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f03834ae000
mprotect(0x7f0385544000, 2097152, PROT_NONE) = 0
mmap(0x7f0385744000, 1748992, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2096000) = 0x7f0385744000
mmap(0x7f03858ef000, 177632, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f03858ef000
close(3) = 0
open("/usr/lib/rstudio/bin/libQtXmlPatterns.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libQtXmlPatterns.so.4", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\313\t\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=4543552, ...}) = 0
mmap(NULL, 6645208, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0382e57000
mprotect(0x7f038326c000, 2097152, PROT_NONE) = 0
mmap(0x7f038346c000, 262144, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x415000) = 0x7f038346c000
mmap(0x7f03834ac000, 5592, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f03834ac000
close(3) = 0
open("/usr/lib/rstudio/bin/libQtGui.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libQtGui.so.4", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\360O\33\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=11462888, ...}) = 0
mmap(NULL, 13571752, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0382165000
mprotect(0x7f0382c09000, 2097152, PROT_NONE) = 0
mmap(0x7f0382e09000, 307200, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xaa4000) = 0x7f0382e09000
mmap(0x7f0382e54000, 9896, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f0382e54000
close(3) = 0
open("/usr/lib/rstudio/bin/libQtDBus.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libQtDBus.so.4", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20A\1\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=513144, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385afe000
mmap(NULL, 2608792, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0381ee8000
mprotect(0x7f0381f63000, 2093056, PROT_NONE) = 0
mmap(0x7f0382162000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7a000) = 0x7f0382162000
close(3) = 0
open("/usr/lib/rstudio/bin/libQtXml.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libQtXml.so.4", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200\4\1\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=289792, ...}) = 0
mmap(NULL, 2384872, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0381ca1000
mprotect(0x7f0381ce4000, 2097152, PROT_NONE) = 0
mmap(0x7f0381ee4000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x43000) = 0x7f0381ee4000
close(3) = 0
open("/usr/lib/rstudio/bin/libQtNetwork.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libQtNetwork.so.4", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340E\3\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1351200, ...}) = 0
mmap(NULL, 3447088, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0381957000
mprotect(0x7f0381a99000, 2093056, PROT_NONE) = 0
mmap(0x7f0381c98000, 36864, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x141000) = 0x7f0381c98000
close(3) = 0
open("/usr/lib/rstudio/bin/libQtCore.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libQtCore.so.4", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\3603\7\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=3078232, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385afd000
mmap(NULL, 5176680, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0381467000
mprotect(0x7f038174a000, 2097152, PROT_NONE) = 0
mmap(0x7f038194a000, 49152, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2e3000) = 0x7f038194a000
mmap(0x7f0381956000, 3432, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f0381956000
close(3) = 0
open("/usr/lib/rstudio/bin/libpthread.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libpthread.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340`\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=142912, ...}) = 0
mmap(NULL, 2213136, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f038124a000
mprotect(0x7f0381262000, 2093056, PROT_NONE) = 0
mmap(0x7f0381461000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x17000) = 0x7f0381461000
mmap(0x7f0381463000, 13584, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f0381463000
close(3) = 0
open("/usr/lib/rstudio/bin/libutil.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libutil.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\16\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=10616, ...}) = 0
mmap(NULL, 2105624, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0381047000
mprotect(0x7f0381049000, 2093056, PROT_NONE) = 0
mmap(0x7f0381248000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1000) = 0x7f0381248000
close(3) = 0
open("/usr/lib/rstudio/bin/libuuid.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libuuid.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\26\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=19120, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385afc000
mmap(NULL, 2113952, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0380e42000
mprotect(0x7f0380e46000, 2093056, PROT_NONE) = 0
mmap(0x7f0381045000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f0381045000
close(3) = 0
open("/usr/lib/rstudio/bin/librt.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/librt.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\220!\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=31688, ...}) = 0
mmap(NULL, 2128856, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0380c3a000
mprotect(0x7f0380c41000, 2093056, PROT_NONE) = 0
mmap(0x7f0380e40000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6000) = 0x7f0380e40000
close(3) = 0
open("/usr/lib/rstudio/bin/libz.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libz.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000#\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=88592, ...}) = 0
mmap(NULL, 2183688, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0380a24000
mprotect(0x7f0380a39000, 2093056, PROT_NONE) = 0
mmap(0x7f0380c38000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x14000) = 0x7f0380c38000
close(3) = 0
open("/usr/lib/rstudio/bin/libstdc++.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libstdc++.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20\271\5\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1486936, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385afb000
mmap(NULL, 3204768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0380715000
mprotect(0x7f0380805000, 2097152, PROT_NONE) = 0
mmap(0x7f0380a05000, 40960, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf0000) = 0x7f0380a05000
mmap(0x7f0380a0f000, 83616, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f0380a0f000
close(3) = 0
open("/usr/lib/rstudio/bin/libm.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libm.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20U\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1067384, ...}) = 0
mmap(NULL, 3162456, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0380410000
mprotect(0x7f0380513000, 2097152, PROT_NONE) = 0
mmap(0x7f0380713000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x103000) = 0x7f0380713000
close(3) = 0
open("/usr/lib/rstudio/bin/libgcc_s.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libgcc_s.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260*\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0644, st_size=544920, ...}) = 0
mmap(NULL, 2186016, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f03801fa000
mprotect(0x7f0380210000, 2093056, PROT_NONE) = 0
mmap(0x7f038040f000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15000) = 0x7f038040f000
close(3) = 0
open("/usr/lib/rstudio/bin/libc.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 \t\2\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1984880, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385afa000
mmap(NULL, 3813008, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037fe57000
mprotect(0x7f037fff0000, 2097152, PROT_NONE) = 0
mmap(0x7f03801f0000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x199000) = 0x7f03801f0000
mmap(0x7f03801f6000, 16016, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f03801f6000
close(3) = 0
open("/usr/lib/rstudio/bin/libXrender.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libXrender.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\34\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=39488, ...}) = 0
mmap(NULL, 2134760, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037fc4d000
mprotect(0x7f037fc56000, 2093056, PROT_NONE) = 0
mmap(0x7f037fe55000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8000) = 0x7f037fe55000
close(3) = 0
open("/usr/lib/rstudio/bin/libjpeg.so.8", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libjpeg.so.8", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340?\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=367288, ...}) = 0
mmap(NULL, 2462360, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037f9f3000
mprotect(0x7f037fa4a000, 2097152, PROT_NONE) = 0
mmap(0x7f037fc4a000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x57000) = 0x7f037fc4a000
close(3) = 0
open("/usr/lib/rstudio/bin/libpng16.so.16", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libpng16.so.16", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p^\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=220288, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385af9000
mmap(NULL, 2315456, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037f7bd000
mprotect(0x7f037f7f2000, 2093056, PROT_NONE) = 0
mmap(0x7f037f9f1000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x34000) = 0x7f037f9f1000
close(3) = 0
open("/usr/lib/rstudio/bin/libudev.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libudev.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\0\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=81992, ...}) = 0
mmap(NULL, 85520, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0385ae4000
mmap(0x7f0385af7000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x12000) = 0x7f0385af7000
close(3) = 0
open("/usr/lib/rstudio/bin/libgstapp-1.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libgstapp-1.0.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 1\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=52288, ...}) = 0
mmap(NULL, 2147600, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037f5b0000
mprotect(0x7f037f5bc000, 2093056, PROT_NONE) = 0
mmap(0x7f037f7bb000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xb000) = 0x7f037f7bb000
close(3) = 0
open("/usr/lib/rstudio/bin/libgstpbutils-1.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libgstpbutils-1.0.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\262\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=163920, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ae3000
mmap(NULL, 2259512, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037f388000
mprotect(0x7f037f3ad000, 2097152, PROT_NONE) = 0
mmap(0x7f037f5ad000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x25000) = 0x7f037f5ad000
close(3) = 0
open("/usr/lib/rstudio/bin/libgstvideo-1.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libgstvideo-1.0.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\340\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=312456, ...}) = 0
mmap(NULL, 2408664, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037f13b000
mprotect(0x7f037f181000, 2097152, PROT_NONE) = 0
mmap(0x7f037f381000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x46000) = 0x7f037f381000
mmap(0x7f037f387000, 216, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f037f387000
close(3) = 0
open("/usr/lib/rstudio/bin/libgstaudio-1.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libgstaudio-1.0.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\306\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=323544, ...}) = 0
mmap(NULL, 2419808, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037eeec000
mprotect(0x7f037ef38000, 2093056, PROT_NONE) = 0
mmap(0x7f037f137000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4b000) = 0x7f037f137000
close(3) = 0
open("/usr/lib/rstudio/bin/libgstbase-1.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libgstbase-1.0.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P\313\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=389832, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ae2000
mmap(NULL, 2485336, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037ec8d000
mprotect(0x7f037ecea000, 2097152, PROT_NONE) = 0
mmap(0x7f037eeea000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5d000) = 0x7f037eeea000
close(3) = 0
open("/usr/lib/rstudio/bin/libgstreamer-1.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libgstreamer-1.0.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\206\2\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1111808, ...}) = 0
mmap(NULL, 3213384, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037e97c000
mprotect(0x7f037ea84000, 2093056, PROT_NONE) = 0
mmap(0x7f037ec83000, 32768, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x107000) = 0x7f037ec83000
mmap(0x7f037ec8b000, 6216, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f037ec8b000
close(3) = 0
open("/usr/lib/rstudio/bin/libgobject-2.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libgobject-2.0.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 \264\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=330848, ...}) = 0
mmap(NULL, 2428872, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037e72b000
mprotect(0x7f037e77a000, 2097152, PROT_NONE) = 0
mmap(0x7f037e97a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4f000) = 0x7f037e97a000
close(3) = 0
open("/usr/lib/rstudio/bin/libglib-2.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libglib-2.0.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\220\246\1\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1102960, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ae1000
mmap(NULL, 3200680, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037e41d000
mprotect(0x7f037e529000, 2093056, PROT_NONE) = 0
mmap(0x7f037e728000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x10b000) = 0x7f037e728000
mmap(0x7f037e72a000, 1704, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f037e72a000
close(3) = 0
open("/usr/lib/rstudio/bin/libsqlite3.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libsqlite3.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\272\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=822232, ...}) = 0
mmap(NULL, 2919160, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037e154000
mprotect(0x7f037e218000, 2093056, PROT_NONE) = 0
mmap(0x7f037e417000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xc3000) = 0x7f037e417000
close(3) = 0
open("/usr/lib/rstudio/bin/libfontconfig.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libfontconfig.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240p\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=273840, ...}) = 0
mmap(NULL, 2369736, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037df11000
mprotect(0x7f037df4e000, 2093056, PROT_NONE) = 0
mmap(0x7f037e14d000, 28672, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3c000) = 0x7f037e14d000
close(3) = 0
open("/usr/lib/rstudio/bin/libQtOpenGL.so.4", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libQtOpenGL.so.4", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@\211\2\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1052032, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ae0000
mmap(NULL, 3151096, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037dc0f000
mprotect(0x7f037dd07000, 2097152, PROT_NONE) = 0
mmap(0x7f037df07000, 36864, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xf8000) = 0x7f037df07000
mmap(0x7f037df10000, 1272, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f037df10000
close(3) = 0
open("/usr/lib/rstudio/bin/libGL.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libGL.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\200\5\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1267736, ...}) = 0
mmap(NULL, 3455960, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037d8c3000
mprotect(0x7f037d9d5000, 2093056, PROT_NONE) = 0
mmap(0x7f037dbd4000, 151552, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x111000) = 0x7f037dbd4000
mmap(0x7f037dbf9000, 89048, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f037dbf9000
close(3) = 0
open("/usr/lib/rstudio/bin/libX11.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libX11.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\300\335\1\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1314936, ...}) = 0
mmap(NULL, 3412192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037d581000
mprotect(0x7f037d6bc000, 2093056, PROT_NONE) = 0
mmap(0x7f037d8bb000, 28672, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13a000) = 0x7f037d8bb000
mmap(0x7f037d8c2000, 224, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f037d8c2000
close(3) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385adf000
open("/usr/lib/rstudio/bin/libfreetype.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libfreetype.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p\4\1\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=813856, ...}) = 0
mmap(NULL, 2909640, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037d2ba000
mprotect(0x7f037d377000, 2097152, PROT_NONE) = 0
mmap(0x7f037d577000, 40960, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xbd000) = 0x7f037d577000
close(3) = 0
open("/usr/lib/rstudio/bin/libSM.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libSM.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\34\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=30920, ...}) = 0
mmap(NULL, 2126192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037d0b2000
mprotect(0x7f037d0b9000, 2093056, PROT_NONE) = 0
mmap(0x7f037d2b8000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6000) = 0x7f037d2b8000
close(3) = 0
open("/usr/lib/rstudio/bin/libICE.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libICE.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`Q\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=102568, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ade000
mmap(NULL, 2212384, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037ce95000
mprotect(0x7f037cead000, 2093056, PROT_NONE) = 0
mmap(0x7f037d0ac000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x17000) = 0x7f037d0ac000
mmap(0x7f037d0ae000, 12832, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f037d0ae000
close(3) = 0
open("/usr/lib/rstudio/bin/libXext.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libXext.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p9\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=73688, ...}) = 0
mmap(NULL, 2169560, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037cc83000
mprotect(0x7f037cc94000, 2093056, PROT_NONE) = 0
mmap(0x7f037ce93000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x10000) = 0x7f037ce93000
close(3) = 0
open("/usr/lib/rstudio/bin/libdbus-1.so.3", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libdbus-1.so.3", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 }\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=298880, ...}) = 0
mmap(NULL, 2394616, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037ca3a000
mprotect(0x7f037ca81000, 2097152, PROT_NONE) = 0
mmap(0x7f037cc81000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x47000) = 0x7f037cc81000
close(3) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385add000
open("/usr/lib/rstudio/bin/libssl.so.1.0.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libssl.so.1.0.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340\255\1\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0555, st_size=557824, ...}) = 0
mmap(NULL, 2599152, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037c7bf000
mprotect(0x7f037c82e000, 2093056, PROT_NONE) = 0
mmap(0x7f037ca2d000, 53248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6e000) = 0x7f037ca2d000
close(3) = 0
open("/usr/lib/rstudio/bin/libcrypto.so.1.0.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libcrypto.so.1.0.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0z\6\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0555, st_size=2873968, ...}) = 0
mmap(NULL, 4699520, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037c343000
mprotect(0x7f037c591000, 2093056, PROT_NONE) = 0
mmap(0x7f037c790000, 176128, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x24d000) = 0x7f037c790000
mmap(0x7f037c7bb000, 13696, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f037c7bb000
close(3) = 0
open("/usr/lib/rstudio/bin/libdl.so.2", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libdl.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\16\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=14600, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385adc000
mmap(NULL, 2109712, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037c13f000
mprotect(0x7f037c141000, 2097152, PROT_NONE) = 0
mmap(0x7f037c341000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f037c341000
close(3) = 0
open("/usr/lib/rstudio/bin/libcap.so.2", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libcap.so.2", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\25\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0644, st_size=17320, ...}) = 0
mmap(NULL, 2112568, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037bf3b000
mprotect(0x7f037bf3f000, 2093056, PROT_NONE) = 0
mmap(0x7f037c13e000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f037c13e000
close(3) = 0
open("/usr/lib/rstudio/bin/liborc-0.4.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/liborc-0.4.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200\263\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=545864, ...}) = 0
mmap(NULL, 2641544, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037bcb6000
mprotect(0x7f037bd36000, 2093056, PROT_NONE) = 0
mmap(0x7f037bf35000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7f000) = 0x7f037bf35000
close(3) = 0
open("/usr/lib/rstudio/bin/libgsttag-1.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libgsttag-1.0.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p\235\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=233984, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385adb000
mmap(NULL, 2329400, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037ba7d000
mprotect(0x7f037bab4000, 2093056, PROT_NONE) = 0
mmap(0x7f037bcb3000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x36000) = 0x7f037bcb3000
close(3) = 0
open("/usr/lib/rstudio/bin/libgmodule-2.0.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libgmodule-2.0.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260\21\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=14608, ...}) = 0
mmap(NULL, 2109880, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037b879000
mprotect(0x7f037b87c000, 2093056, PROT_NONE) = 0
mmap(0x7f037ba7b000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f037ba7b000
close(3) = 0
open("/usr/lib/rstudio/bin/libffi.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libffi.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\33\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=35216, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ada000
mmap(NULL, 2131688, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037b670000
mprotect(0x7f037b678000, 2093056, PROT_NONE) = 0
mmap(0x7f037b877000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x7000) = 0x7f037b877000
close(3) = 0
open("/usr/lib/rstudio/bin/libpcre.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libpcre.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0p\27\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=452840, ...}) = 0
mmap(NULL, 2548328, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037b401000
mprotect(0x7f037b46f000, 2093056, PROT_NONE) = 0
mmap(0x7f037b66e000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x6d000) = 0x7f037b66e000
close(3) = 0
open("/usr/lib/rstudio/bin/libexpat.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libexpat.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`?\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=170144, ...}) = 0
mmap(NULL, 2265320, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037b1d7000
mprotect(0x7f037b1fe000, 2093056, PROT_NONE) = 0
mmap(0x7f037b3fd000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x26000) = 0x7f037b3fd000
close(3) = 0
open("/usr/lib/rstudio/bin/libnvidia-tls.so.340.76", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libnvidia-tls.so.340.76", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260\t\0\0\0\0\0\0"..., 832) = 832
lseek(3, 10704, SEEK_SET) = 10704
read(3, "\4\0\0\0\20\0\0\0\1\0\0\0GNU\0\0\0\0\0\2\0\0\0\3\0\0\0c\0\0\0", 32) = 32
fstat(3, {st_mode=S_IFREG|0755, st_size=12976, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ad9000
mmap(NULL, 2109248, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037afd4000
mprotect(0x7f037afd7000, 2093056, PROT_NONE) = 0
mmap(0x7f037b1d6000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f037b1d6000
close(3) = 0
open("/usr/lib/rstudio/bin/libnvidia-glcore.so.340.76", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libnvidia-glcore.so.340.76", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\340c\255\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=44003064, ...}) = 0
mmap(NULL, 46218368, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f03783c0000
mprotect(0x7f037a21e000, 2093056, PROT_NONE) = 0
mmap(0x7f037a41d000, 12165120, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1e5d000) = 0x7f037a41d000
mmap(0x7f037afb7000, 117888, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f037afb7000
close(3) = 0
open("/usr/lib/rstudio/bin/libxcb.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libxcb.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@\244\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=137968, ...}) = 0
mmap(NULL, 2233352, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f037819e000
mprotect(0x7f03781bf000, 2093056, PROT_NONE) = 0
mmap(0x7f03783be000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x20000) = 0x7f03783be000
close(3) = 0
open("/usr/lib/rstudio/bin/libbz2.so.1.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libbz2.so.1.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\0\27\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=65760, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ad8000
mmap(NULL, 2160936, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0377f8e000
mprotect(0x7f0377f9d000, 2093056, PROT_NONE) = 0
mmap(0x7f037819c000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xe000) = 0x7f037819c000
close(3) = 0
open("/usr/lib/rstudio/bin/libharfbuzz.so.0", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libharfbuzz.so.0", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0@u\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=380544, ...}) = 0
mmap(NULL, 2476944, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0377d31000
mprotect(0x7f0377d8b000, 2093056, PROT_NONE) = 0
mmap(0x7f0377f8a000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x59000) = 0x7f0377f8a000
close(3) = 0
open("/usr/lib/rstudio/bin/libattr.so.1", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libattr.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0`\24\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=18736, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ad7000
mmap(NULL, 2113912, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0377b2c000
mprotect(0x7f0377b30000, 2093056, PROT_NONE) = 0
mmap(0x7f0377d2f000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3000) = 0x7f0377d2f000
close(3) = 0
open("/usr/lib/rstudio/bin/libXau.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libXau.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 \17\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=14512, ...}) = 0
mmap(NULL, 2109744, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0377928000
mprotect(0x7f037792a000, 2097152, PROT_NONE) = 0
mmap(0x7f0377b2a000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2000) = 0x7f0377b2a000
close(3) = 0
open("/usr/lib/rstudio/bin/libXdmcp.so.6", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libXdmcp.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0 \25\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=22688, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ad6000
mmap(NULL, 2117912, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0377722000
mprotect(0x7f0377727000, 2093056, PROT_NONE) = 0
mmap(0x7f0377926000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x4000) = 0x7f0377926000
close(3) = 0
open("/usr/lib/rstudio/bin/libgraphite2.so.3", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/usr/lib/libgraphite2.so.3", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260(\0\0\0\0\0\0"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=121184, ...}) = 0
mmap(NULL, 2216376, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f0377504000
mprotect(0x7f0377520000, 2093056, PROT_NONE) = 0
mmap(0x7f037771f000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1b000) = 0x7f037771f000
close(3) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ad5000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ad4000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ad3000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ad2000
mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385ad0000
arch_prctl(ARCH_SET_FS, 0x7f0385ad07c0) = 0
mprotect(0x7f03801f0000, 16384, PROT_READ) = 0
mprotect(0x7f037771f000, 8192, PROT_READ) = 0
mprotect(0x7f0377926000, 4096, PROT_READ) = 0
mprotect(0x7f0377b2a000, 4096, PROT_READ) = 0
mprotect(0x7f0377d2f000, 4096, PROT_READ) = 0
mprotect(0x7f0381461000, 4096, PROT_READ) = 0
mprotect(0x7f037b66e000, 4096, PROT_READ) = 0
mprotect(0x7f037e728000, 4096, PROT_READ) = 0
mprotect(0x7f0380c38000, 4096, PROT_READ) = 0
mprotect(0x7f0380713000, 4096, PROT_READ) = 0
mprotect(0x7f037f9f1000, 4096, PROT_READ) = 0
mprotect(0x7f037d577000, 24576, PROT_READ) = 0
mprotect(0x7f0377f8a000, 12288, PROT_READ) = 0
mprotect(0x7f03783be000, 4096, PROT_READ) = 0
mprotect(0x7f037c341000, 4096, PROT_READ) = 0
mprotect(0x7f037b3fd000, 12288, PROT_READ) = 0
mprotect(0x7f037b877000, 4096, PROT_READ) = 0
mprotect(0x7f037ba7b000, 4096, PROT_READ) = 0
mprotect(0x7f037e97a000, 4096, PROT_READ) = 0
mprotect(0x7f037ec83000, 24576, PROT_READ) = 0
mprotect(0x7f037eeea000, 4096, PROT_READ) = 0
mprotect(0x7f037bcb3000, 8192, PROT_READ) = 0
mprotect(0x7f0380e40000, 4096, PROT_READ) = 0
mprotect(0x7f037bf35000, 8192, PROT_READ) = 0
mprotect(0x7f037c790000, 126976, PROT_READ) = 0
mprotect(0x7f037ca2d000, 24576, PROT_READ) = 0
mprotect(0x7f037cc81000, 4096, PROT_READ) = 0
mprotect(0x7f037d8bb000, 8192, PROT_READ) = 0
mprotect(0x7f037ce93000, 4096, PROT_READ) = 0
mprotect(0x7f037d0ac000, 4096, PROT_READ) = 0
mprotect(0x7f0381045000, 4096, PROT_READ) = 0
mprotect(0x7f037d2b8000, 4096, PROT_READ) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385acf000
mprotect(0x7f0380a05000, 32768, PROT_READ) = 0
mprotect(0x7f038194a000, 45056, PROT_READ) = 0
mprotect(0x7f037fe55000, 4096, PROT_READ) = 0
mprotect(0x7f037e14d000, 8192, PROT_READ) = 0
mprotect(0x7f0382e09000, 274432, PROT_READ) = 0
mprotect(0x7f037df07000, 16384, PROT_READ) = 0
mprotect(0x7f037e417000, 12288, PROT_READ) = 0
mprotect(0x7f037f137000, 8192, PROT_READ) = 0
mprotect(0x7f037f381000, 8192, PROT_READ) = 0
mprotect(0x7f037f5ad000, 8192, PROT_READ) = 0
mprotect(0x7f037f7bb000, 4096, PROT_READ) = 0
mprotect(0x7f0385af7000, 4096, PROT_READ) = 0
mprotect(0x7f037fc4a000, 8192, PROT_READ) = 0
mprotect(0x7f0381248000, 4096, PROT_READ) = 0
mprotect(0x7f0381c98000, 28672, PROT_READ) = 0
mprotect(0x7f0381ee4000, 12288, PROT_READ) = 0
mprotect(0x7f0382162000, 8192, PROT_READ) = 0
mprotect(0x7f038346c000, 258048, PROT_READ) = 0
mprotect(0x7f0385744000, 1642496, PROT_READ) = 0
mprotect(0xade000, 73728, PROT_READ) = 0
mprotect(0x7f0385b3c000, 4096, PROT_READ) = 0
munmap(0x7f0385b00000, 245656) = 0
set_tid_address(0x7f0385ad0a90) = 3390
set_robust_list(0x7f0385ad0aa0, 24) = 0
rt_sigaction(SIGRTMIN, {0x7f038124fbb0, [], SA_RESTORER|SA_SIGINFO, 0x7f038125a740}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {0x7f038124fc40, [], SA_RESTORER|SA_RESTART|SA_SIGINFO, 0x7f038125a740}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM64_INFINITY}) = 0
brk(0) = 0x1483000
brk(0x14a4000) = 0x14a4000
futex(0x7f037e72a568, FUTEX_WAKE_PRIVATE, 2147483647) = 0
futex(0x7f037e72a568, FUTEX_WAKE_PRIVATE, 2147483647) = 0
futex(0x7f037c3420c8, FUTEX_WAKE_PRIVATE, 2147483647) = 0
open("/proc/self/maps", O_RDONLY) = 3
lseek(3, 0, SEEK_SET) = 0
read(3, "00400000-008df000 r-xp 00000000 "..., 4096) = 4031
read(3, "7f037b3fd000-7f037b400000 r--p 0"..., 4096) = 4090
read(3, "7f037cc82000-7f037cc83000 rw-p 0"..., 4096) = 4049
read(3, "7f037e728000-7f037e729000 r--p 0"..., 4096) = 4017
read(3, "7f037fc4a000-7f037fc4c000 r--p 0"..., 4096) = 4019
read(3, "7f0381462000-7f0381463000 rw-p 0"..., 4096) = 4022
read(3, "7ffe841c3000-7ffe841c5000 r--p 0"..., 4096) = 244
read(3, "", 4096) = 0
close(3) = 0
brk(0x14d3000) = 0x14d3000
brk(0x14c5000) = 0x14c5000
mmap(NULL, 200704, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385b0b000
brk(0x14b5000) = 0x14b5000
mremap(0x7f0385b0b000, 200704, 204800, MREMAP_MAYMOVE) = 0x7f0385a9d000
mremap(0x7f0385a9d000, 204800, 208896, MREMAP_MAYMOVE) = 0x7f0385b09000
mremap(0x7f0385b09000, 208896, 212992, MREMAP_MAYMOVE) = 0x7f0385a9b000
mremap(0x7f0385a9b000, 212992, 217088, MREMAP_MAYMOVE) = 0x7f0385b07000
mremap(0x7f0385b07000, 217088, 221184, MREMAP_MAYMOVE) = 0x7f0385a99000
mremap(0x7f0385a99000, 221184, 225280, MREMAP_MAYMOVE) = 0x7f0385b05000
mremap(0x7f0385b05000, 225280, 229376, MREMAP_MAYMOVE) = 0x7f0385a97000
mremap(0x7f0385a97000, 229376, 233472, MREMAP_MAYMOVE) = 0x7f0385b03000
mremap(0x7f0385b03000, 233472, 237568, MREMAP_MAYMOVE) = 0x7f0385a95000
mremap(0x7f0385a95000, 237568, 241664, MREMAP_MAYMOVE) = 0x7f0385b01000
mremap(0x7f0385b01000, 241664, 245760, MREMAP_MAYMOVE) = 0x7f0385a93000
mremap(0x7f0385a93000, 245760, 249856, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 249856, 253952, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 253952, 258048, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 258048, 262144, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 262144, 266240, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 266240, 270336, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 270336, 274432, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 274432, 278528, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 278528, 282624, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 282624, 286720, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 286720, 290816, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 290816, 294912, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 294912, 299008, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 299008, 303104, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 303104, 307200, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 307200, 311296, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 311296, 315392, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 315392, 319488, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 319488, 323584, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 323584, 327680, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 327680, 331776, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 331776, 335872, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 335872, 339968, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 339968, 344064, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 344064, 348160, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 348160, 356352, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 356352, 360448, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 360448, 364544, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 364544, 368640, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 368640, 372736, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 372736, 376832, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 376832, 380928, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 380928, 385024, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 385024, 389120, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 389120, 393216, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 393216, 397312, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 397312, 401408, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 401408, 405504, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 405504, 409600, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 409600, 413696, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 413696, 417792, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 417792, 421888, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 421888, 425984, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 425984, 430080, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 430080, 434176, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 434176, 438272, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 438272, 442368, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 442368, 446464, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 446464, 450560, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 450560, 454656, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 454656, 458752, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 458752, 462848, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 462848, 466944, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 466944, 471040, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 471040, 475136, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 475136, 479232, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 479232, 483328, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 483328, 487424, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 487424, 491520, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 491520, 495616, MREMAP_MAYMOVE) = 0x7f0385a56000
mremap(0x7f0385a56000, 495616, 499712, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 499712, 503808, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 503808, 507904, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 507904, 512000, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 512000, 516096, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 516096, 520192, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 520192, 524288, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 524288, 528384, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 528384, 532480, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 532480, 536576, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 536576, 540672, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 540672, 544768, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 544768, 548864, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 548864, 552960, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 552960, 557056, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 557056, 561152, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 561152, 565248, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 565248, 569344, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 569344, 573440, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 573440, 577536, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 577536, 581632, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 581632, 585728, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 585728, 589824, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 589824, 593920, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 593920, 598016, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 598016, 602112, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 602112, 606208, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 606208, 610304, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 610304, 614400, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 614400, 618496, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 618496, 622592, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 622592, 626688, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 626688, 630784, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 630784, 634880, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 634880, 638976, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 638976, 643072, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 643072, 647168, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 647168, 651264, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 651264, 655360, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 655360, 659456, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 659456, 663552, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 663552, 667648, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 667648, 671744, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 671744, 675840, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 675840, 679936, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 679936, 684032, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 684032, 688128, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 688128, 692224, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 692224, 696320, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 696320, 700416, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 700416, 704512, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 704512, 712704, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 712704, 716800, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 716800, 720896, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 720896, 724992, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 724992, 729088, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 729088, 733184, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 733184, 737280, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 737280, 741376, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 741376, 745472, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 745472, 749568, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 749568, 753664, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 753664, 757760, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 757760, 761856, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 761856, 765952, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 765952, 770048, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 770048, 774144, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 774144, 778240, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 778240, 782336, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 782336, 786432, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 786432, 790528, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 790528, 794624, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 794624, 798720, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 798720, 802816, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 802816, 806912, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 806912, 811008, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 811008, 815104, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 815104, 819200, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 819200, 823296, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 823296, 827392, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 827392, 831488, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 831488, 835584, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 835584, 839680, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 839680, 843776, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 843776, 847872, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 847872, 851968, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 851968, 856064, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 856064, 860160, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 860160, 864256, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 864256, 868352, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 868352, 872448, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 872448, 876544, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 876544, 880640, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 880640, 884736, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 884736, 888832, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 888832, 892928, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 892928, 897024, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 897024, 901120, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 901120, 905216, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 905216, 909312, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 909312, 913408, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 913408, 917504, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 917504, 921600, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 921600, 925696, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 925696, 929792, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 929792, 933888, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 933888, 937984, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 937984, 942080, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 942080, 946176, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 946176, 950272, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 950272, 954368, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 954368, 958464, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 958464, 962560, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 962560, 966656, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 966656, 970752, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 970752, 974848, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 974848, 978944, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 978944, 983040, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 983040, 987136, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 987136, 991232, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 991232, 995328, MREMAP_MAYMOVE) = 0x7f03859dc000
mremap(0x7f03859dc000, 995328, 999424, MREMAP_MAYMOVE) = 0x7f0377410000
mremap(0x7f0377410000, 999424, 1003520, MREMAP_MAYMOVE) = 0x7f03859da000
mremap(0x7f03859da000, 1003520, 1007616, MREMAP_MAYMOVE) = 0x7f037740e000
mremap(0x7f037740e000, 1007616, 1011712, MREMAP_MAYMOVE) = 0x7f03859d8000
mremap(0x7f03859d8000, 1011712, 1015808, MREMAP_MAYMOVE) = 0x7f037740c000
mremap(0x7f037740c000, 1015808, 1019904, MREMAP_MAYMOVE) = 0x7f03859d6000
mremap(0x7f03859d6000, 1019904, 1024000, MREMAP_MAYMOVE) = 0x7f037740a000
mremap(0x7f037740a000, 1024000, 1028096, MREMAP_MAYMOVE) = 0x7f03859d4000
mremap(0x7f03859d4000, 1028096, 1032192, MREMAP_MAYMOVE) = 0x7f0377408000
mremap(0x7f0377408000, 1032192, 1036288, MREMAP_MAYMOVE) = 0x7f03859d2000
mremap(0x7f03859d2000, 1036288, 1040384, MREMAP_MAYMOVE) = 0x7f0377406000
mremap(0x7f0377406000, 1040384, 1044480, MREMAP_MAYMOVE) = 0x7f03859d0000
brk(0x14ae000) = 0x14ae000
munmap(0x7f03859d0000, 1044480) = 0
open("/home/marek/.nv/nvidia-application-profile-globals-rc", O_RDONLY) = -1 ENOENT (No such file or directory)
clock_gettime(CLOCK_MONOTONIC, {16537, 376573135}) = 0
clock_gettime(CLOCK_MONOTONIC, {16537, 376610151}) = 0
open("/home/marek/.nv/nvidia-application-profiles-rc", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/home/marek/.nv/nvidia-application-profiles-rc.d", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/etc/nvidia/nvidia-application-profiles-rc", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/etc/nvidia/nvidia-application-profiles-rc.d/", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/share/nvidia/nvidia-application-profiles-340.76-rc", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=3527, ...}) = 0
fstat(3, {st_mode=S_IFREG|0644, st_size=3527, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f0385b3b000
read(3, "# Application profiles for the N"..., 4096) = 3527
close(3) = 0
munmap(0x7f0385b3b000, 4096) = 0
open("/usr/share/nvidia/nvidia-application-profiles-rc", O_RDONLY) = -1 ENOENT (No such file or directory)
readlink("/proc/3390/exe", "/usr/lib/rstudio/bin/rstudio", 4095) = 28
open("/proc/self/maps", O_RDONLY) = 3
lseek(3, 0, SEEK_SET) = 0
read(3, "00400000-008df000 r-xp 00000000 "..., 4096) = 4031
read(3, "7f037b3fd000-7f037b400000 r--p 0"..., 4096) = 4090
read(3, "7f037cc82000-7f037cc83000 rw-p 0"..., 4096) = 4049
read(3, "7f037e728000-7f037e729000 r--p 0"..., 4096) = 4017
read(3, "7f037fc4a000-7f037fc4c000 r--p 0"..., 4096) = 4019
read(3, "7f0381462000-7f0381463000 rw-p 0"..., 4096) = 4022
read(3, "7ffe841c3000-7ffe841c5000 r--p 0"..., 4096) = 244
read(3, "", 4096) = 0
close(3) = 0
brk(0x14d9000) = 0x14d9000
brk(0x152e000) = 0x152e000
brk(0x15d8000) = 0x15d8000
open("/proc/self/exe", O_RDONLY) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\2\0>\0\1\0\0\0\360=W\0\0\0\0\0"..., 64) = 64
lseek(3, 0, SEEK_END) = 5182568
lseek(3, 64, SEEK_SET) = 64
read(3, "\6\0\0\0\5\0\0\0@\0\0\0\0\0\0\0@\0@\0\0\0\0\0@\0@\0\0\0\0\0"..., 504) = 504
lseek(3, 5180648, SEEK_SET) = 5180648
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1920) = 1920
lseek(3, 5180381, SEEK_SET) = 5180381
read(3, "\0.shstrtab\0.interp\0.note.ABI-tag"..., 260) = 260
close(3) = 0
open("/usr/lib/libQtWebKit.so.4.10.4", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0755, st_size=35918296, ...}) = 0
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\7>\0\0\0\0\0"..., 64) = 64
lseek(3, 0, SEEK_END) = 35918296
lseek(3, 64, SEEK_SET) = 64
read(3, "\1\0\0\0\5\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 392) = 392
lseek(3, 35916504, SEEK_SET) = 35916504
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1792) = 1792
lseek(3, 35916243, SEEK_SET) = 35916243
read(3, "\0.shstrtab\0.note.gnu.build-id\0.g"..., 257) = 257
close(3) = 0
open("/usr/lib/libQtXmlPatterns.so.4.8.6", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0755, st_size=4543552, ...}) = 0
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\320\313\t\0\0\0\0\0"..., 64) = 64
lseek(3, 0, SEEK_END) = 4543552
lseek(3, 64, SEEK_SET) = 64
read(3, "\1\0\0\0\5\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 392) = 392
lseek(3, 4541760, SEEK_SET) = 4541760
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1792) = 1792
lseek(3, 4541499, SEEK_SET) = 4541499
read(3, "\0.shstrtab\0.note.gnu.build-id\0.g"..., 257) = 257
close(3) = 0
open("/usr/lib/libQtGui.so.4.8.6", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0755, st_size=11462888, ...}) = 0
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\360O\33\0\0\0\0\0"..., 64) = 64
lseek(3, 0, SEEK_END) = 11462888
lseek(3, 64, SEEK_SET) = 64
read(3, "\1\0\0\0\5\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 392) = 392
lseek(3, 11461096, SEEK_SET) = 11461096
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1792) = 1792
lseek(3, 11460839, SEEK_SET) = 11460839
read(3, "\0.shstrtab\0.note.gnu.build-id\0.g"..., 257) = 257
close(3) = 0
open("/usr/lib/libQtDBus.so.4.8.6", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0755, st_size=513144, ...}) = 0
read(3, "\177ELF\2\1\1\3\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\20A\1\0\0\0\0\0"..., 64) = 64
lseek(3, 0, SEEK_END) = 513144
lseek(3, 64, SEEK_SET) = 64
read(3, "\1\0\0\0\5\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 392) = 392
lseek(3, 511352, SEEK_SET) = 511352
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1792) = 1792
lseek(3, 511091, SEEK_SET) = 511091
read(3, "\0.shstrtab\0.note.gnu.build-id\0.g"..., 257) = 257
close(3) = 0
open("/usr/lib/libQtXml.so.4.8.6", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0755, st_size=289792, ...}) = 0
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200\4\1\0\0\0\0\0"..., 64) = 64
lseek(3, 0, SEEK_END) = 289792
lseek(3, 64, SEEK_SET) = 64
read(3, "\1\0\0\0\5\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 392) = 392
lseek(3, 288000, SEEK_SET) = 288000
r

Ultra 10 won't start anymore

Hello,
I have an Ultra 10 box with an extra video card inside. Everything was working fine, and then I got curious and decided to open it up to see what's inside. Now it won't start anymore. I turn the computer on, the fans start spinning, but nothing gets displayed on screen. I can hear the hard disk turning too, and the CD drive is powered, but I don't think anything is going on.
The only thing I touched when I opened it was the extra graphics card, but I was very careful and I am pretty sure I did not fry it. I get nothing displayed on screen when I plug the monitor in the original video card either.
Is there anything I can do to find out what the problem is? Is there some special switch inside the box that I may have turned off without noticing?
Thanks for the help...

Hello,
when you removed the ATI Radeon (XVR-100) and powered-on, the long card (Creator3D or Elite3D) with the weird connector (13W3) became the default output device. It takes precedence over the integrated video.
Remove the long card (if you don't own a 13W3-HD15 adapter or monitor with 13W3 connector) and insert the XVR-100 (attach the monitor to the integrated video). If you power-on the integrated video becomes the default. You should see the output on the monitor.
Enter show-displays at the ok-prompt. If only a single entry is displayed, power-down and check if the card is properly seated.
Otherwise press the letter of the entry that doesn't contain /pci@1f,0/pci@1,1/SUNW,m64B@2.
This a sample output of an Ultra 10 with Creator3D as add-in board.
ok show-displays
a) /SUNW,ffb@1e,0
b) /pci@1f,0/pci@1,1/SUNW,m64B@2
q) NO SELECTION
Enter Selection, q to quit: b
/pci@1f,0/pci@1,1/SUNW,m64B@2 has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for
/pci@1f,0/pci@1,1/SUNW,m64B@2
nvalias mydev ^Y
The above sets the output-device to the integrated video even if a Creator3D is installed.
Then enter setenv output-device mydev (if you used this name) and reset-all. Attach the monitor to the XVR-100.
Michael

X11 won't start (sets monitor to standby) with nVidia card

Hello everyone!
I'm having some trouble getting my computer to work properly. Yesterday it was working perfectly, but today it would't start again. After some troubleshooting I've determined that the problem lies with X11 and the graphics driver. The bootloader, grub, and arch itself, boots perfectly in runlevel 3, but the moment you run "startx" it would appear to be loading for a while and finally the screen goes to standby mode and there is no way out of that other than reseting the computer using the reset button. I've tried uninstalling the nvidia drivers and installing nouveau drivers, but it still won't start X, this time arround, it would just hang up with a white screen.
I've also tried removing xorg.conf and also using nvidia utility to generate a new one, but neither seems to work.
/var/log/Xorg.0.log doesn't report any errors, it just gives different info from the configuration and the graphics card and just ends there.
I've tried booting with a debian live USB but it would't boot either (the computer would just restart). I've also tried a Kubuntu live USB, this time arround, it would start to boot but the graphics appeared to be corrupted (strange colored noise all over the screen) and eventually it would just hang up. Using nomodeset Kubuntu finally booted (using vesa I guess?), but the same didn't work in Arch (I'm guessing because I have the nvidia drivers installed instead of nouveau).
In conclussion, something appears to be wrong with the graphics card, I dont't know if it's a software problem or a hardware problem, as it started from one day to the other, without any upgrades in between, and it just doesn't work in any of the 3 distributions I've tested.
Any suggestions in what to do to troubleshoot this?
Thanks in advance,
Santiago.-

Xorg.0.log
[ 35.560]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[ 35.560] X Protocol Version 11, Revision 0
[ 35.560] Build Operating System: Linux 3.11.6-1-ARCH x86_64
[ 35.561] Current Operating System: Linux arch 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64
[ 35.561] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=17d019be-e01f-4c1c-ac50-69e1f3dc0592 rw quiet 3
[ 35.562] Build Date: 01 November 2013 05:10:48PM
[ 35.562]
[ 35.562] Current version of pixman: 0.30.2
[ 35.562] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 35.562] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 35.564] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 4 21:35:07 2013
[ 35.576] (==) Using config file: "/etc/X11/xorg.conf"
[ 35.576] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 35.577] (==) ServerLayout "Layout0"
[ 35.577] (**) |-->Screen "Screen0" (0)
[ 35.577] (**) | |-->Monitor "Monitor0"
[ 35.577] (**) | |-->Device "Device0"
[ 35.577] (**) |-->Input Device "Keyboard0"
[ 35.577] (**) |-->Input Device "Mouse0"
[ 35.577] (==) Automatically adding devices
[ 35.577] (==) Automatically enabling devices
[ 35.577] (==) Automatically adding GPU devices
[ 35.603] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 35.603] Entry deleted from font path.
[ 35.603] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 35.603] Entry deleted from font path.
[ 35.603] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 35.603] Entry deleted from font path.
[ 35.603] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 35.604] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 35.604] Entry deleted from font path.
[ 35.604] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 35.604] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 35.604] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 35.604] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 35.604] (WW) Disabling Keyboard0
[ 35.604] (WW) Disabling Mouse0
[ 35.604] (II) Loader magic: 0x7fdc20
[ 35.604] (II) Module ABI versions:
[ 35.604] X.Org ANSI C Emulation: 0.4
[ 35.604] X.Org Video Driver: 14.1
[ 35.604] X.Org XInput driver : 19.1
[ 35.604] X.Org Server Extension : 7.0
[ 35.604] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 35.605] (--) PCI:*(0:1:0:0) 10de:0421:1682:2353 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 35.606] Initializing built-in extension Generic Event Extension
[ 35.606] Initializing built-in extension SHAPE
[ 35.606] Initializing built-in extension MIT-SHM
[ 35.606] Initializing built-in extension XInputExtension
[ 35.606] Initializing built-in extension XTEST
[ 35.607] Initializing built-in extension BIG-REQUESTS
[ 35.607] Initializing built-in extension SYNC
[ 35.607] Initializing built-in extension XKEYBOARD
[ 35.607] Initializing built-in extension XC-MISC
[ 35.608] Initializing built-in extension SECURITY
[ 35.608] Initializing built-in extension XINERAMA
[ 35.608] Initializing built-in extension XFIXES
[ 35.608] Initializing built-in extension RENDER
[ 35.608] Initializing built-in extension RANDR
[ 35.609] Initializing built-in extension COMPOSITE
[ 35.609] Initializing built-in extension DAMAGE
[ 35.609] Initializing built-in extension MIT-SCREEN-SAVER
[ 35.609] Initializing built-in extension DOUBLE-BUFFER
[ 35.619] Initializing built-in extension RECORD
[ 35.629] Initializing built-in extension DPMS
[ 35.638] Initializing built-in extension X-Resource
[ 35.647] Initializing built-in extension XVideo
[ 35.656] Initializing built-in extension XVideo-MotionCompensation
[ 35.665] Initializing built-in extension XFree86-VidModeExtension
[ 35.673] Initializing built-in extension XFree86-DGA
[ 35.682] Initializing built-in extension XFree86-DRI
[ 35.690] Initializing built-in extension DRI2
[ 35.690] (II) LoadModule: "glx"
[ 35.757] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 36.111] (II) Module glx: vendor="NVIDIA Corporation"
[ 36.111] compiled for 4.0.2, module version = 1.0.0
[ 36.111] Module class: X.Org Server Extension
[ 36.111] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
[ 36.126] Loading extension GLX
[ 36.126] (II) LoadModule: "nvidia"
[ 36.136] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 36.195] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 36.195] compiled for 4.0.2, module version = 1.0.0
[ 36.195] Module class: X.Org Video Driver
[ 36.197] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
[ 36.197] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 36.197] (--) using VT number 2
[ 36.248] (II) Loading sub module "fb"
[ 36.248] (II) LoadModule: "fb"
[ 36.259] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 36.270] (II) Module fb: vendor="X.Org Foundation"
[ 36.270] compiled for 1.14.4, module version = 1.0.0
[ 36.270] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.270] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 36.270] (II) Loading sub module "wfb"
[ 36.270] (II) LoadModule: "wfb"
[ 36.270] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 36.271] (II) Module wfb: vendor="X.Org Foundation"
[ 36.271] compiled for 1.14.4, module version = 1.0.0
[ 36.271] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.271] (II) Loading sub module "shadow"
[ 36.271] (II) LoadModule: "shadow"
[ 36.271] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 36.272] (II) Module shadow: vendor="X.Org Foundation"
[ 36.272] compiled for 1.14.4, module version = 1.1.0
[ 36.272] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.272] (II) Loading sub module "ramdac"
[ 36.272] (II) LoadModule: "ramdac"
[ 36.272] (II) Module "ramdac" already built-in
[ 36.274] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 36.274] (==) NVIDIA(0): RGB weight 888
[ 36.274] (==) NVIDIA(0): Default visual is TrueColor
[ 36.274] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 36.274] (**) NVIDIA(0): Option "UseEdidDpi" "False"
[ 36.274] (**) NVIDIA(0): Option "DPI" "96 x 96"
[ 36.274] (**) NVIDIA(0): Enabling 2D acceleration
[ 50.151] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 50.256] (II) NVIDIA(GPU-0): Display (Samsung SMB2330H (CRT-0)) does not support NVIDIA 3D
[ 50.256] (II) NVIDIA(GPU-0): Vision stereo.
[ 50.256] (II) NVIDIA(0): NVIDIA GPU GeForce 8500 GT (G86) at PCI:1:0:0 (GPU-0)
[ 50.256] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 50.256] (--) NVIDIA(0): VideoBIOS: 60.86.41.00.85
[ 50.256] (II) NVIDIA(0): Detected PCI Express Link width: 16X
journalctl -xb
-- Logs begin at Sat 2013-08-17 21:55:41 ART, end at Mon 2013-11-04 22:01:35 ART. --
Nov 04 21:59:09 arch systemd-journal[120]: Runtime journal is using 364.0K (max 100.1M, leaving 150.2M of free 1001.3M, current limit 100.1M).
Nov 04 21:59:09 arch systemd-journal[120]: Runtime journal is using 368.0K (max 100.1M, leaving 150.2M of free 1001.3M, current limit 100.1M).
Nov 04 21:59:09 arch kernel: Initializing cgroup subsys cpuset
Nov 04 21:59:09 arch kernel: Initializing cgroup subsys cpu
Nov 04 21:59:09 arch kernel: Initializing cgroup subsys cpuacct
Nov 04 21:59:09 arch kernel: Linux version 3.11.6-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013
Nov 04 21:59:09 arch kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=17d019be-e01f-4c1c-ac50-69e1f3dc0592 rw quiet 3
Nov 04 21:59:09 arch kernel: e820: BIOS-provided physical RAM map:
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x0000000000100000-0x000000007fbb4fff] usable
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fbb5000-0x000000007fbf7fff] ACPI NVS
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fbf8000-0x000000007fd4bfff] reserved
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd4c000-0x000000007fd51fff] ACPI data
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd52000-0x000000007fd52fff] ACPI NVS
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd53000-0x000000007fd54fff] ACPI data
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd55000-0x000000007fd56fff] ACPI NVS
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd57000-0x000000007fd57fff] reserved
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd58000-0x000000007fd5bfff] ACPI NVS
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd5c000-0x000000007fd6afff] reserved
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x000000007fd6b000-0x000000007fefffff] usable
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffbfffff] reserved
Nov 04 21:59:09 arch kernel: BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
Nov 04 21:59:09 arch kernel: NX (Execute Disable) protection: active
Nov 04 21:59:09 arch kernel: SMBIOS 2.4 present.
Nov 04 21:59:09 arch kernel: DMI: /DG31PR, BIOS PRG3110H.86A.0071.2010.0318.1704 03/18/2010
Nov 04 21:59:09 arch kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Nov 04 21:59:09 arch kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Nov 04 21:59:09 arch kernel: No AGP bridge found
Nov 04 21:59:09 arch kernel: e820: last_pfn = 0x7ff00 max_arch_pfn = 0x400000000
Nov 04 21:59:09 arch kernel: MTRR default type: uncachable
Nov 04 21:59:09 arch kernel: MTRR fixed ranges enabled:
Nov 04 21:59:09 arch kernel: 00000-9FFFF write-back
Nov 04 21:59:09 arch kernel: A0000-E7FFF uncachable
Nov 04 21:59:09 arch kernel: E8000-FFFFF write-protect
Nov 04 21:59:09 arch kernel: MTRR variable ranges enabled:
Nov 04 21:59:09 arch kernel: 0 base 000000000 mask F80000000 write-back
Nov 04 21:59:09 arch kernel: 1 base 07FF00000 mask FFFF00000 uncachable
Nov 04 21:59:09 arch kernel: 2 disabled
Nov 04 21:59:09 arch kernel: 3 disabled
Nov 04 21:59:09 arch kernel: 4 disabled
Nov 04 21:59:09 arch kernel: 5 disabled
Nov 04 21:59:09 arch kernel: 6 disabled
Nov 04 21:59:09 arch kernel: 7 disabled
Nov 04 21:59:09 arch kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Nov 04 21:59:09 arch kernel: found SMP MP-table at [mem 0x000fc620-0x000fc62f] mapped at [ffff8800000fc620]
Nov 04 21:59:09 arch kernel: Scanning 1 areas for low memory corruption
Nov 04 21:59:09 arch kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Nov 04 21:59:09 arch kernel: [mem 0x00000000-0x000fffff] page 4k
Nov 04 21:59:09 arch kernel: BRK [0x01b2f000, 0x01b2ffff] PGTABLE
Nov 04 21:59:09 arch kernel: BRK [0x01b30000, 0x01b30fff] PGTABLE
Nov 04 21:59:09 arch kernel: BRK [0x01b31000, 0x01b31fff] PGTABLE
Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7f800000-0x7f9fffff]
Nov 04 21:59:09 arch kernel: [mem 0x7f800000-0x7f9fffff] page 2M
Nov 04 21:59:09 arch kernel: BRK [0x01b32000, 0x01b32fff] PGTABLE
Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7c000000-0x7f7fffff]
Nov 04 21:59:09 arch kernel: [mem 0x7c000000-0x7f7fffff] page 2M
Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x00100000-0x7bffffff]
Nov 04 21:59:09 arch kernel: [mem 0x00100000-0x001fffff] page 4k
Nov 04 21:59:09 arch kernel: [mem 0x00200000-0x7bffffff] page 2M
Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7fa00000-0x7fbb4fff]
Nov 04 21:59:09 arch kernel: [mem 0x7fa00000-0x7fbb4fff] page 4k
Nov 04 21:59:09 arch kernel: BRK [0x01b33000, 0x01b33fff] PGTABLE
Nov 04 21:59:09 arch kernel: init_memory_mapping: [mem 0x7fd6b000-0x7fefffff]
Nov 04 21:59:09 arch kernel: [mem 0x7fd6b000-0x7fefffff] page 4k
Nov 04 21:59:09 arch kernel: BRK [0x01b34000, 0x01b34fff] PGTABLE
Nov 04 21:59:09 arch kernel: RAMDISK: [mem 0x37a14000-0x37d01fff]
Nov 04 21:59:09 arch kernel: ACPI: RSDP 00000000000f03f0 00024 (v02 INTEL)
Nov 04 21:59:09 arch kernel: ACPI: XSDT 000000007fd53f10 00044 (v01 INTEL DG31PR 06222004 MSFT 00010013)
Nov 04 21:59:09 arch kernel: ACPI: FACP 000000007fd51d90 000F4 (v04 INTEL DG31PR 06222004 MSFT 00010013)
Nov 04 21:59:09 arch kernel: ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20130517/tbfadt-395)
Nov 04 21:59:09 arch kernel: ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT - 0x7FD56F40/0x000000007FD52F40, using 32 (20130517/tbfadt-522)
Nov 04 21:59:09 arch kernel: ACPI: DSDT 000000007fd4c010 04BE9 (v01 INTEL DG31PR 00000000 INTL 20051117)
Nov 04 21:59:09 arch kernel: ACPI: FACS 000000007fd56f40 00040
Nov 04 21:59:09 arch kernel: ACPI: APIC 000000007fd51f10 0006C (v02 INTEL DG31PR 06222004 MSFT 00010013)
Nov 04 21:59:09 arch kernel: ACPI: HPET 000000007fd5ad10 00038 (v01 INTEL ICH7HPET 06222004 AMI. 00000001)
Nov 04 21:59:09 arch kernel: ACPI: MCFG 000000007fd5ac10 0003C (v01 INTEL DG31PR 06222004 MSFT 00000097)
Nov 04 21:59:09 arch kernel: ACPI: Local APIC address 0xfee00000
Nov 04 21:59:09 arch kernel: No NUMA configuration found
Nov 04 21:59:09 arch kernel: Faking a node at [mem 0x0000000000000000-0x000000007fefffff]
Nov 04 21:59:09 arch kernel: Initmem setup node 0 [mem 0x00000000-0x7fefffff]
Nov 04 21:59:09 arch kernel: NODE_DATA [mem 0x7fefb000-0x7fefffff]
Nov 04 21:59:09 arch kernel: [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d200000-ffff88007f1fffff] on node 0
Nov 04 21:59:09 arch kernel: Zone ranges:
Nov 04 21:59:09 arch kernel: DMA [mem 0x00001000-0x00ffffff]
Nov 04 21:59:09 arch kernel: DMA32 [mem 0x01000000-0xffffffff]
Nov 04 21:59:09 arch kernel: Normal empty
Nov 04 21:59:09 arch kernel: Movable zone start for each node
Nov 04 21:59:09 arch kernel: Early memory node ranges
Nov 04 21:59:09 arch kernel: node 0: [mem 0x00001000-0x0009efff]
Nov 04 21:59:09 arch kernel: node 0: [mem 0x00100000-0x7fbb4fff]
Nov 04 21:59:09 arch kernel: node 0: [mem 0x7fd6b000-0x7fefffff]
Nov 04 21:59:09 arch kernel: On node 0 totalpages: 523496
Nov 04 21:59:09 arch kernel: DMA zone: 64 pages used for memmap
Nov 04 21:59:09 arch kernel: DMA zone: 21 pages reserved
Nov 04 21:59:09 arch kernel: DMA zone: 3998 pages, LIFO batch:0
Nov 04 21:59:09 arch kernel: DMA32 zone: 8124 pages used for memmap
Nov 04 21:59:09 arch kernel: DMA32 zone: 519498 pages, LIFO batch:31
Nov 04 21:59:09 arch kernel: ACPI: PM-Timer IO Port: 0x408
Nov 04 21:59:09 arch kernel: ACPI: Local APIC address 0xfee00000
Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Nov 04 21:59:09 arch kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Nov 04 21:59:09 arch kernel: ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
Nov 04 21:59:09 arch kernel: IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
Nov 04 21:59:09 arch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Nov 04 21:59:09 arch kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Nov 04 21:59:09 arch kernel: ACPI: IRQ0 used by override.
Nov 04 21:59:09 arch kernel: ACPI: IRQ2 used by override.
Nov 04 21:59:09 arch kernel: ACPI: IRQ9 used by override.
Nov 04 21:59:09 arch kernel: Using ACPI (MADT) for SMP configuration information
Nov 04 21:59:09 arch kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
Nov 04 21:59:09 arch kernel: smpboot: Allowing 4 CPUs, 0 hotplug CPUs
Nov 04 21:59:09 arch kernel: nr_irqs_gsi: 40
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fbb5000-0x7fbf7fff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fbf8000-0x7fd4bfff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd4c000-0x7fd51fff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd52000-0x7fd52fff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd53000-0x7fd54fff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd55000-0x7fd56fff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd57000-0x7fd57fff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd58000-0x7fd5bfff]
Nov 04 21:59:09 arch kernel: PM: Registered nosave memory: [mem 0x7fd5c000-0x7fd6afff]
Nov 04 21:59:09 arch kernel: e820: [mem 0x7ff00000-0xfed1bfff] available for PCI devices
Nov 04 21:59:09 arch kernel: Booting paravirtualized kernel on bare hardware
Nov 04 21:59:09 arch kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
Nov 04 21:59:09 arch kernel: PERCPU: Embedded 29 pages/cpu @ffff88007f800000 s86528 r8192 d24064 u524288
Nov 04 21:59:09 arch kernel: pcpu-alloc: s86528 r8192 d24064 u524288 alloc=1*2097152
Nov 04 21:59:09 arch kernel: pcpu-alloc: [0] 0 1 2 3
Nov 04 21:59:09 arch kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 515287
Nov 04 21:59:09 arch kernel: Policy zone: DMA32
Nov 04 21:59:09 arch kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=17d019be-e01f-4c1c-ac50-69e1f3dc0592 rw quiet 3
Nov 04 21:59:09 arch kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Nov 04 21:59:09 arch kernel: Checking aperture...
Nov 04 21:59:09 arch kernel: No AGP bridge found
Nov 04 21:59:09 arch kernel: Calgary: detecting Calgary via BIOS EBDA area
Nov 04 21:59:09 arch kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Nov 04 21:59:09 arch kernel: Memory: 2045916K/2093984K available (5050K kernel code, 799K rwdata, 1696K rodata, 1140K init, 1288K bss, 48068K reserved)
Nov 04 21:59:09 arch kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Nov 04 21:59:09 arch kernel: Preemptible hierarchical RCU implementation.
Nov 04 21:59:09 arch kernel: RCU dyntick-idle grace-period acceleration is enabled.
Nov 04 21:59:09 arch kernel: Dump stacks of tasks blocking RCU-preempt GP.
Nov 04 21:59:09 arch kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
Nov 04 21:59:09 arch kernel: NR_IRQS:8448 nr_irqs:712 16
Nov 04 21:59:09 arch kernel: Console: colour dummy device 80x25
Nov 04 21:59:09 arch kernel: console [tty0] enabled
Nov 04 21:59:09 arch kernel: allocated 8388608 bytes of page_cgroup
Nov 04 21:59:09 arch kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Nov 04 21:59:09 arch kernel: hpet clockevent registered
Nov 04 21:59:09 arch kernel: tsc: Fast TSC calibration using PIT
Nov 04 21:59:09 arch kernel: tsc: Detected 2399.803 MHz processor
Nov 04 21:59:09 arch kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 4801.58 BogoMIPS (lpj=7999343)
Nov 04 21:59:09 arch kernel: pid_max: default: 32768 minimum: 301
Nov 04 21:59:09 arch kernel: Security Framework initialized
Nov 04 21:59:09 arch kernel: AppArmor: AppArmor disabled by boot time parameter
Nov 04 21:59:09 arch kernel: Yama: becoming mindful.
Nov 04 21:59:09 arch kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Nov 04 21:59:09 arch kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Nov 04 21:59:09 arch kernel: Mount-cache hash table entries: 256
Nov 04 21:59:09 arch kernel: Initializing cgroup subsys memory
Nov 04 21:59:09 arch kernel: Initializing cgroup subsys devices
Nov 04 21:59:09 arch kernel: Initializing cgroup subsys freezer
Nov 04 21:59:09 arch kernel: Initializing cgroup subsys net_cls
Nov 04 21:59:09 arch kernel: Initializing cgroup subsys blkio
Nov 04 21:59:09 arch kernel: CPU: Physical Processor ID: 0
Nov 04 21:59:09 arch kernel: CPU: Processor Core ID: 0
Nov 04 21:59:09 arch kernel: mce: CPU supports 6 MCE banks
Nov 04 21:59:09 arch kernel: CPU0: Thermal monitoring enabled (TM2)
Nov 04 21:59:09 arch kernel: Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Nov 04 21:59:09 arch kernel: Freeing SMP alternatives memory: 20K (ffffffff819e6000 - ffffffff819eb000)
Nov 04 21:59:09 arch kernel: ACPI: Core revision 20130517
Nov 04 21:59:09 arch kernel: ACPI: All ACPI Tables successfully acquired
Nov 04 21:59:09 arch kernel: ftrace: allocating 20100 entries in 79 pages
Nov 04 21:59:09 arch kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Nov 04 21:59:09 arch kernel: smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
Nov 04 21:59:09 arch kernel: Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
Nov 04 21:59:09 arch kernel: perf_event_intel: PEBS disabled due to CPU errata
Nov 04 21:59:09 arch kernel: ... version: 2
Nov 04 21:59:09 arch kernel: ... bit width: 40
Nov 04 21:59:09 arch kernel: ... generic registers: 2
Nov 04 21:59:09 arch kernel: ... value mask: 000000ffffffffff
Nov 04 21:59:09 arch kernel: ... max period: 000000007fffffff
Nov 04 21:59:09 arch kernel: ... fixed-purpose events: 3
Nov 04 21:59:09 arch kernel: ... event mask: 0000000700000003
Nov 04 21:59:09 arch kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Nov 04 21:59:09 arch kernel: smpboot: Booting Node 0, Processors #1 #2 #3 OK
Nov 04 21:59:09 arch kernel: Brought up 4 CPUs
Nov 04 21:59:09 arch kernel: smpboot: Total of 4 processors activated (19206.35 BogoMIPS)
Nov 04 21:59:09 arch kernel: devtmpfs: initialized
Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fbb5000-0x7fbf7fff] (274432 bytes)
Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fd52000-0x7fd52fff] (4096 bytes)
Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fd55000-0x7fd56fff] (8192 bytes)
Nov 04 21:59:09 arch kernel: PM: Registering ACPI NVS region [mem 0x7fd58000-0x7fd5bfff] (16384 bytes)
Nov 04 21:59:09 arch kernel: RTC time: 0:59:05, date: 11/05/13
Nov 04 21:59:09 arch kernel: NET: Registered protocol family 16
Nov 04 21:59:09 arch kernel: ACPI: bus type PCI registered
Nov 04 21:59:09 arch kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Nov 04 21:59:09 arch kernel: PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xe0000000-0xe40fffff] (base 0xe0000000)
Nov 04 21:59:09 arch kernel: PCI: not using MMCONFIG
Nov 04 21:59:09 arch kernel: PCI: Using configuration type 1 for base access
Nov 04 21:59:09 arch kernel: mtrr: your CPUs had inconsistent fixed MTRR settings
Nov 04 21:59:09 arch kernel: mtrr: your CPUs had inconsistent variable MTRR settings
Nov 04 21:59:09 arch kernel: mtrr: probably your BIOS does not setup all CPUs.
Nov 04 21:59:09 arch kernel: mtrr: corrected configuration.
Nov 04 21:59:09 arch kernel: bio: create slab <bio-0> at 0
Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(Module Device)
Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(Processor Device)
Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Nov 04 21:59:09 arch kernel: ACPI: Added _OSI(Processor Aggregator Device)
Nov 04 21:59:09 arch kernel: ACPI: EC: Look up EC in DSDT
Nov 04 21:59:09 arch kernel: ACPI: Executed 1 blocks of module-level executable AML code
Nov 04 21:59:09 arch kernel: ACPI: SSDT 000000007fd56c10 002CC (v01 AMI IST 00000001 MSFT 03000001)
Nov 04 21:59:09 arch kernel: ACPI: Dynamic OEM Table Load:
Nov 04 21:59:09 arch kernel: ACPI: SSDT (null) 002CC (v01 AMI IST 00000001 MSFT 03000001)
Nov 04 21:59:09 arch kernel: ACPI: Interpreter enabled
Nov 04 21:59:09 arch kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
Nov 04 21:59:09 arch kernel: ACPI: (supports S0 S1 S3 S4 S5)
Nov 04 21:59:09 arch kernel: ACPI: Using IOAPIC for interrupt routing
Nov 04 21:59:09 arch kernel: PCI: MMCONFIG for domain 0000 [bus 00-40] at [mem 0xe0000000-0xe40fffff] (base 0xe0000000)
Nov 04 21:59:09 arch kernel: PCI: MMCONFIG at [mem 0xe0000000-0xe40fffff] reserved in ACPI motherboard resources
Nov 04 21:59:09 arch kernel: PCI: MMCONFIG for 0000 [bus00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000) (size reduced!)
Nov 04 21:59:09 arch kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Nov 04 21:59:09 arch kernel: ACPI: No dock devices found.
Nov 04 21:59:09 arch kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
Nov 04 21:59:09 arch kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Nov 04 21:59:09 arch kernel: acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
Nov 04 21:59:09 arch kernel: acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
Nov 04 21:59:09 arch kernel: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
Nov 04 21:59:09 arch kernel: PCI host bridge to bus 0000:00
Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
Nov 04 21:59:09 arch kernel: pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
Nov 04 21:59:09 arch kernel: pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
Nov 04 21:59:09 arch kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xfb200000-0xfb203fff 64bit]
Nov 04 21:59:09 arch kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: System wakeup disabled by ACPI
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.0: reg 0x20: [io 0xf080-0xf09f]
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.1: reg 0x20: [io 0xf060-0xf07f]
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.2: reg 0x20: [io 0xf040-0xf05f]
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.2: System wakeup disabled by ACPI
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.3: reg 0x20: [io 0xf020-0xf03f]
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.3: System wakeup disabled by ACPI
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xfb204000-0xfb2043ff]
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: System wakeup disabled by ACPI
Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: System wakeup disabled by ACPI
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: address space collision: [io 0x0400-0x047f] conflicts with ACPI CPU throttle [??? 0x00000410-0x00000415 flags 0x80000000]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0290 (mask 00ff)
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x10: [io 0xf130-0xf137]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x14: [io 0xf120-0xf123]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x18: [io 0xf110-0xf117]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x1c: [io 0xf100-0xf103]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.1: reg 0x20: [io 0xf0f0-0xf0ff]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x10: [io 0xf0e0-0xf0e7]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x14: [io 0xf0d0-0xf0d3]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x18: [io 0xf0c0-0xf0c7]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x1c: [io 0xf0b0-0xf0b3]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: reg 0x20: [io 0xf0a0-0xf0af]
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.2: PME# supported from D3hot
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: [10de:0421] type 00 class 0x030000
Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb01ffff pref]
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfb0fffff]
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: reg 0x18: [mem 0xfb120000-0xfb120fff 64bit]
Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: reg 0x30: [mem 0xfb100000-0xfb11ffff pref]
Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: supports D1 D2
Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0xfb100000-0xfb1fffff]
Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
Nov 04 21:59:09 arch kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Nov 04 21:59:09 arch kernel: ACPI: Enabled 3 GPEs in block 00 to 1F
Nov 04 21:59:09 arch kernel: ACPI: \_SB_.PCI0: notify handler is installed
Nov 04 21:59:09 arch kernel: Found 1 acpi root devices
Nov 04 21:59:09 arch kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Nov 04 21:59:09 arch kernel: vgaarb: loaded
Nov 04 21:59:09 arch kernel: vgaarb: bridge control possible 0000:01:00.0
Nov 04 21:59:09 arch kernel: PCI: Using ACPI for IRQ routing
Nov 04 21:59:09 arch kernel: PCI: pci_cache_line_size set to 64 bytes
Nov 04 21:59:09 arch kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
Nov 04 21:59:09 arch kernel: e820: reserve RAM buffer [mem 0x7fbb5000-0x7fffffff]
Nov 04 21:59:09 arch kernel: e820: reserve RAM buffer [mem 0x7ff00000-0x7fffffff]
Nov 04 21:59:09 arch kernel: NetLabel: Initializing
Nov 04 21:59:09 arch kernel: NetLabel: domain hash size = 128
Nov 04 21:59:09 arch kernel: NetLabel: protocols = UNLABELED CIPSOv4
Nov 04 21:59:09 arch kernel: NetLabel: unlabeled traffic allowed by default
Nov 04 21:59:09 arch kernel: HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Nov 04 21:59:09 arch kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Nov 04 21:59:09 arch kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Nov 04 21:59:09 arch kernel: Switched to clocksource hpet
Nov 04 21:59:09 arch kernel: pnp: PnP ACPI init
Nov 04 21:59:09 arch kernel: ACPI: bus type PNP registered
Nov 04 21:59:09 arch kernel: system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
Nov 04 21:59:09 arch kernel: system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
Nov 04 21:59:09 arch kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
Nov 04 21:59:09 arch kernel: system 00:01: [io 0x0400-0x047f] could not be reserved
Nov 04 21:59:09 arch kernel: system 00:01: [io 0x1180-0x119f] has been reserved
Nov 04 21:59:09 arch kernel: system 00:01: [io 0x0500-0x053f] has been reserved
Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved
Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xffb00000-0xffcfffff] could not be reserved
Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfc800000-0xfc800fff] has been reserved
Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xfed20000-0xfed7ffff] has been reserved
Nov 04 21:59:09 arch kernel: system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
Nov 04 21:59:09 arch kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
Nov 04 21:59:09 arch kernel: system 00:02: [io 0x0290-0x029f] has been reserved
Nov 04 21:59:09 arch kernel: system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 04 21:59:09 arch kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
Nov 04 21:59:09 arch kernel: pnp 00:04: [dma 2]
Nov 04 21:59:09 arch kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
Nov 04 21:59:09 arch kernel: pnp 00:05: [dma 0 disabled]
Nov 04 21:59:09 arch kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
Nov 04 21:59:09 arch kernel: pnp 00:06: [dma 4]
Nov 04 21:59:09 arch kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
Nov 04 21:59:09 arch kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
Nov 04 21:59:09 arch kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
Nov 04 21:59:09 arch kernel: system 00:09: [io 0x04d0-0x04d1] has been reserved
Nov 04 21:59:09 arch kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
Nov 04 21:59:09 arch kernel: pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
Nov 04 21:59:09 arch kernel: pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
Nov 04 21:59:09 arch kernel: pnp: PnP ACPI: found 12 devices
Nov 04 21:59:09 arch kernel: ACPI: bus type PNP unregistered
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
Nov 04 21:59:09 arch kernel: pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfb0fffff]
Nov 04 21:59:09 arch kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0xfb100000-0xfb1fffff]
Nov 04 21:59:09 arch kernel: pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: PCI bridge to [bus 04]
Nov 04 21:59:09 arch kernel: pci 0000:00:1e.0: setting latency timer to 64
Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:00: resource 7 [mem 0x80000000-0xffffffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfb0fffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:03: resource 1 [mem 0xfb100000-0xfb1fffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
Nov 04 21:59:09 arch kernel: pci_bus 0000:04: resource 7 [mem 0x80000000-0xffffffff]
Nov 04 21:59:09 arch kernel: NET: Registered protocol family 2
Nov 04 21:59:09 arch kernel: TCP established hash table entries: 16384 (order: 6, 262144 bytes)
Nov 04 21:59:09 arch kernel: TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
Nov 04 21:59:09 arch kernel: TCP: Hash tables configured (established 16384 bind 16384)
Nov 04 21:59:09 arch kernel: TCP: reno registered
Nov 04 21:59:09 arch kernel: UDP hash table entries: 1024 (order: 3, 32768 bytes)
Nov 04 21:59:09 arch kernel: UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
Nov 04 21:59:09 arch kernel: NET: Registered protocol family 1
Nov 04 21:59:09 arch kernel: pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: Boot video device
Nov 04 21:59:09 arch kernel: PCI: CLS 64 bytes, default 64
Nov 04 21:59:09 arch kernel: Unpacking initramfs...
Nov 04 21:59:09 arch kernel: Freeing initrd memory: 3000K (ffff880037a14000 - ffff880037d02000)
Nov 04 21:59:09 arch kernel: Scanning for low memory corruption every 60 seconds
Nov 04 21:59:09 arch kernel: audit: initializing netlink socket (disabled)
Nov 04 21:59:09 arch kernel: type=2000 audit(1383613146.559:1): initialized
Nov 04 21:59:09 arch kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Nov 04 21:59:09 arch kernel: zbud: loaded
Nov 04 21:59:09 arch kernel: VFS: Disk quotas dquot_6.5.2
Nov 04 21:59:09 arch kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Nov 04 21:59:09 arch kernel: msgmni has been set to 4001
Nov 04 21:59:09 arch kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Nov 04 21:59:09 arch kernel: io scheduler noop registered
Nov 04 21:59:09 arch kernel: io scheduler deadline registered
Nov 04 21:59:09 arch kernel: io scheduler cfq registered (default)
Nov 04 21:59:09 arch kernel: pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
Nov 04 21:59:09 arch kernel: pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
Nov 04 21:59:09 arch kernel: pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
Nov 04 21:59:09 arch kernel: pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
Nov 04 21:59:09 arch kernel: pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
Nov 04 21:59:09 arch kernel: pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
Nov 04 21:59:09 arch kernel: pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
Nov 04 21:59:09 arch kernel: pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
Nov 04 21:59:09 arch kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 8086 ss_did 27d0
Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 8086 ss_did 27d2
Nov 04 21:59:09 arch kernel: pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
Nov 04 21:59:09 arch kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Nov 04 21:59:09 arch kernel: vesafb: mode is 640x480x32, linelength=2560, pages=0
Nov 04 21:59:09 arch kernel: vesafb: scrolling: redraw
Nov 04 21:59:09 arch kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Nov 04 21:59:09 arch kernel: vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90002400000, using 1216k, total 1216k
Nov 04 21:59:09 arch kernel: Console: switching to colour frame buffer device 80x30
Nov 04 21:59:09 arch kernel: fb0: VESA VGA frame buffer device
Nov 04 21:59:09 arch kernel: intel_idle: does not run on family 6 model 15
Nov 04 21:59:09 arch kernel: GHES: HEST is not enabled!
Nov 04 21:59:09 arch kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Nov 04 21:59:09 arch kernel: 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 04 21:59:09 arch kernel: Linux agpgart interface v0.103
Nov 04 21:59:09 arch kernel: i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
Nov 04 21:59:09 arch kernel: i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
Nov 04 21:59:09 arch kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 04 21:59:09 arch kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 04 21:59:09 arch kernel: mousedev: PS/2 mouse device common for all mice
Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: RTC can wake from S4
Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
Nov 04 21:59:09 arch kernel: cpuidle: using governor ladder
Nov 04 21:59:09 arch kernel: cpuidle: using governor menu
Nov 04 21:59:09 arch kernel: drop_monitor: Initializing network drop monitor service
Nov 04 21:59:09 arch kernel: TCP: cubic registered
Nov 04 21:59:09 arch kernel: NET: Registered protocol family 10
Nov 04 21:59:09 arch kernel: NET: Registered protocol family 17
Nov 04 21:59:09 arch kernel: Key type dns_resolver registered
Nov 04 21:59:09 arch kernel: PM: Hibernation image not present or could not be loaded.
Nov 04 21:59:09 arch kernel: registered taskstats version 1
Nov 04 21:59:09 arch kernel: Magic number: 5:843:960
Nov 04 21:59:09 arch kernel: memory memory11: hash matches
Nov 04 21:59:09 arch kernel: rtc_cmos 00:07: setting system clock to 2013-11-05 00:59:07 UTC (1383613147)
Nov 04 21:59:09 arch kernel: Freeing unused kernel memory: 1140K (ffffffff818c9000 - ffffffff819e6000)
Nov 04 21:59:09 arch kernel: Write protecting the kernel read-only data: 8192k
Nov 04 21:59:09 arch kernel: Freeing unused kernel memory: 1084K (ffff8800014f1000 - ffff880001600000)
Nov 04 21:59:09 arch kernel: Freeing unused kernel memory: 352K (ffff8800017a8000 - ffff880001800000)
Nov 04 21:59:09 arch systemd-udevd[58]: starting version 208
Nov 04 21:59:09 arch kernel: Floppy drive(s): fd0 is 1.44M
Nov 04 21:59:09 arch kernel: SCSI subsystem initialized
Nov 04 21:59:09 arch kernel: ACPI: bus type USB registered
Nov 04 21:59:09 arch kernel: usbcore: registered new interface driver usbfs
Nov 04 21:59:09 arch kernel: usbcore: registered new interface driver hub
Nov 04 21:59:09 arch kernel: usbcore: registered new device driver usb
Nov 04 21:59:09 arch kernel: ACPI: bus type ATA registered
Nov 04 21:59:09 arch kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Nov 04 21:59:09 arch kernel: uhci_hcd: USB Universal Host Controller Interface driver
Nov 04 21:59:09 arch kernel: libata version 3.00 loaded.
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080
Nov 04 21:59:09 arch kernel: ehci-pci: EHCI PCI platform driver
Nov 04 21:59:09 arch kernel: hub 1-0:1.0: USB hub found
Nov 04 21:59:09 arch kernel: hub 1-0:1.0: 2 ports detected
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060
Nov 04 21:59:09 arch kernel: hub 2-0:1.0: USB hub found
Nov 04 21:59:09 arch kernel: hub 2-0:1.0: 2 ports detected
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040
Nov 04 21:59:09 arch kernel: FDC 0 is a post-1991 82077
Nov 04 21:59:09 arch kernel: hub 3-0:1.0: USB hub found
Nov 04 21:59:09 arch kernel: hub 3-0:1.0: 2 ports detected
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: setting latency timer to 64
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Nov 04 21:59:09 arch kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020
Nov 04 21:59:09 arch kernel: hub 4-0:1.0: USB hub found
Nov 04 21:59:09 arch kernel: hub 4-0:1.0: 2 ports detected
Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.1: version 2.13
Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.1: setting latency timer to 64
Nov 04 21:59:09 arch kernel: scsi0 : ata_piix
Nov 04 21:59:09 arch kernel: scsi1 : ata_piix
Nov 04 21:59:09 arch kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14
Nov 04 21:59:09 arch kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15
Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.2: MAP [
Nov 04 21:59:09 arch kernel: P0 P2 P1 P3 ]
Nov 04 21:59:09 arch kernel: ata_piix 0000:00:1f.2: setting latency timer to 64
Nov 04 21:59:09 arch kernel: ata2: port disabled--ignoring
Nov 04 21:59:09 arch kernel: scsi2 : ata_piix
Nov 04 21:59:09 arch kernel: scsi3 : ata_piix
Nov 04 21:59:09 arch kernel: ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19
Nov 04 21:59:09 arch kernel: ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19
Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: setting latency timer to 64
Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5
Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: debug port 1
Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0xfb204000
Nov 04 21:59:09 arch kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Nov 04 21:59:09 arch kernel: hub 5-0:1.0: USB hub found
Nov 04 21:59:09 arch kernel: hub 5-0:1.0: 8 ports detected
Nov 04 21:59:09 arch kernel: hub 1-0:1.0: USB hub found
Nov 04 21:59:09 arch kernel: hub 1-0:1.0: 2 ports detected
Nov 04 21:59:09 arch kernel: hub 2-0:1.0: USB hub found
Nov 04 21:59:09 arch kernel: hub 2-0:1.0: 2 ports detected
Nov 04 21:59:09 arch kernel: hub 3-0:1.0: USB hub found
Nov 04 21:59:09 arch kernel: hub 3-0:1.0: 2 ports detected
Nov 04 21:59:09 arch kernel: hub 4-0:1.0: USB hub found
Nov 04 21:59:09 arch kernel: hub 4-0:1.0: 2 ports detected
Nov 04 21:59:09 arch kernel: ata4.00: ATA-8: WDC WD10EZEX-00RKKA0, 80.00A80, max UDMA/133
Nov 04 21:59:09 arch kernel: ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov 04 21:59:09 arch kernel: ata4.00: configured for UDMA/133
Nov 04 21:59:09 arch kernel: scsi 3:0:0:0: Direct-Access ATA WDC WD10EZEX-00R 80.0 PQ: 0 ANSI: 5
Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] 4096-byte physical blocks
Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Write Protect is off
Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 04 21:59:09 arch kernel: sda: sda1 sda2 sda3 sda4 sda5
Nov 04 21:59:09 arch kernel: sd 3:0:0:0: [sda] Attached SCSI disk
Nov 04 21:59:09 arch kernel: usb 3-2: new full-speed USB device number 2 using uhci_hcd
Nov 04 21:59:09 arch kernel: tsc: Refined TSC clocksource calibration: 2399.950 MHz
Nov 04 21:59:09 arch kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Nov 04 21:59:09 arch systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
Nov 04 21:59:09 arch systemd[1]: Set hostname to <arch>.
Nov 04 21:59:09 arch kernel: Switched to clocksource tsc
Nov 04 21:59:09 arch systemd[1]: Failed to load default target: No such file or directory
Nov 04 21:59:09 arch systemd[1]: Trying to load rescue target...
Nov 04 21:59:09 arch systemd[1]: Starting Encrypted Volumes.
Nov 04 21:59:09 arch systemd[1]: Reached target Encrypted Volumes.
Nov 04 21:59:09 arch systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
Nov 04 21:59:09 arch systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
Nov 04 21:59:09 arch systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
Nov 04 21:59:09 arch systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
Nov 04 21:59:09 arch systemd[1]: Starting Journal Socket.
Nov 04 21:59:09 arch systemd[1]: Listening on Journal Socket.
Nov 04 21:59:09 arch systemd[1]: Starting Setup Virtual Console...
Nov 04 21:59:09 arch systemd[1]: Starting Apply Kernel Variables...
Nov 04 21:59:09 arch systemd[1]: Started Set Up Additional Binary Formats.
Nov 04 21:59:09 arch systemd[1]: Started Load Kernel Modules.
Nov 04 21:59:09 arch systemd[1]: Mounted FUSE Control File System.
Nov 04 21:59:09 arch systemd[1]: Mounting POSIX Message Queue File System...
Nov 04 21:59:09 arch systemd[1]: Mounting Huge Pages File System...
Nov 04 21:59:09 arch systemd[1]: Mounting Configuration File System...
Nov 04 21:59:09 arch systemd[1]: Starting Journal Service...
Nov 04 21:59:09 arch systemd[1]: Started Journal Service.
Nov 04 21:59:09 arch systemd-journal[120]: Journal started
-- Subject: The Journal has been started
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- The system journal process has been starting up, opened the journal
-- files for writing and is now ready to process requests.
Nov 04 21:59:09 arch systemd[1]: Starting Create list of required static device nodes for the current kernel...
-- Subject: Unit kmod-static-nodes.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit kmod-static-nodes.service has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Starting udev Kernel Socket.
-- Subject: Unit systemd-udevd-kernel.socket has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-udevd-kernel.socket has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Listening on udev Kernel Socket.
-- Subject: Unit systemd-udevd-kernel.socket has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-udevd-kernel.socket has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Starting udev Control Socket.
-- Subject: Unit systemd-udevd-control.socket has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-udevd-control.socket has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Listening on udev Control Socket.
-- Subject: Unit systemd-udevd-control.socket has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-udevd-control.socket has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Starting udev Coldplug all Devices...
-- Subject: Unit systemd-udev-trigger.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-udev-trigger.service has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Mounting Debug File System...
-- Subject: Unit sys-kernel-debug.mount has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit sys-kernel-debug.mount has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Expecting device dev-sda4.device...
-- Subject: Unit dev-sda4.device has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit dev-sda4.device has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Expecting device dev-disk-by\x2duuid-32d1daa9\x2daa59\x2d4ac1\x2da592\x2d23aa1ae655c5.device...
-- Subject: Unit dev-disk-by\x2duuid-32d1daa9\x2daa59\x2d4ac1\x2da592\x2d23aa1ae655c5.device has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit dev-disk-by\x2duuid-32d1daa9\x2daa59\x2d4ac1\x2da592\x2d23aa1ae655c5.device has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Mounting Temporary Directory...
-- Subject: Unit tmp.mount has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit tmp.mount has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Started File System Check on Root Device.
-- Subject: Unit systemd-fsck-root.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-fsck-root.service has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Starting Remount Root and Kernel File Systems...
-- Subject: Unit systemd-remount-fs.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-remount-fs.service has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Starting Root Slice.
-- Subject: Unit -.slice has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit -.slice has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Created slice Root Slice.
-- Subject: Unit -.slice has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit -.slice has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Starting System Slice.
-- Subject: Unit system.slice has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit system.slice has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Created slice System Slice.
-- Subject: Unit system.slice has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit system.slice has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Expecting device dev-disk-by\x2duuid-bdf255b1\x2d60c6\x2d4714\x2d8dc8\x2d5bd057b49aaa.device...
-- Subject: Unit dev-disk-by\x2duuid-bdf255b1\x2d60c6\x2d4714\x2d8dc8\x2d5bd057b49aaa.device has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit dev-disk-by\x2duuid-bdf255b1\x2d60c6\x2d4714\x2d8dc8\x2d5bd057b49aaa.device has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Started Apply Kernel Variables.
-- Subject: Unit systemd-sysctl.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-sysctl.service has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Mounted POSIX Message Queue File System.
-- Subject: Unit dev-mqueue.mount has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit dev-mqueue.mount has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Mounted Huge Pages File System.
-- Subject: Unit dev-hugepages.mount has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit dev-hugepages.mount has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Mounted Configuration File System.
-- Subject: Unit sys-kernel-config.mount has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit sys-kernel-config.mount has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Mounted Debug File System.
-- Subject: Unit sys-kernel-debug.mount has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit sys-kernel-debug.mount has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Mounted Temporary Directory.
-- Subject: Unit tmp.mount has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit tmp.mount has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Started Create list of required static device nodes for the current kernel.
-- Subject: Unit kmod-static-nodes.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit kmod-static-nodes.service has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Started udev Coldplug all Devices.
-- Subject: Unit systemd-udev-trigger.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-udev-trigger.service has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Starting Create static device nodes in /dev...
-- Subject: Unit systemd-tmpfiles-setup-dev.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-tmpfiles-setup-dev.service has begun starting up.
Nov 04 21:59:09 arch systemd[1]: Started Remount Root and Kernel File Systems.
-- Subject: Unit systemd-remount-fs.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-remount-fs.service has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Starting Load/Save Random Seed...
-- Subject: Unit systemd-random-seed.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-random-seed.service has begun starting up.
Nov 04 21:59:09 arch kernel: EXT4-fs (sda1): re-mounted. Opts: data=ordered
Nov 04 21:59:09 arch systemd[1]: Started Load/Save Random Seed.
-- Subject: Unit systemd-random-seed.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
-- Unit systemd-random-seed.service has finished starting up.
-- The start-up result is done.
Nov 04 21:59:09 arch systemd[1]: Started Create static device nodes in /dev.
-- Subject: Unit systemd-tmpfiles-setup-dev.service has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mail

My iMac 2009 model won't start.

My iMac 2009 model won't start. Was working fine the night before, tried to on it but still no response. I also tried unplugging and plugging into the main switch plus other power points several times , doesn't work either. Please assist as most of work and important information are stored in it. Thank you

When you press the power button, what happens? When you say "no response," does that mean it does not power on at all?
You unplugged from power and plugged it back, but I would try it again following this procedure for resetting SMC exactly
http://support.apple.com/kb/ht3964
When you connect it back, if you are using a "power strip," try connecting it directly to a wall outlet. Be sure to check the connection of the power cord at the iMac end (disconnect and reconnect there too). You should disconnect ALL cables from the iMac and try to start it up with only the power cord connected.

Satellite A200 - Button support won't start on windows start up

Hey,
Today I decided to turn off as many useless program's as I could (to speed up my pc) so I went to Msconfig (I have vista home premium 32 bit), and turned a lot of things off. Including the "toshiba button support". The next time I restarted my extra buttons on the top of the keyboard all worked, beside one. The one that normally turns windows media player on. This time, it did nothing at all. The play/resume, stop, forward, backward and internet button all worked without problem.
However, I really liked the WMP button, so I tried to find out what the problem was. I found out it was the button support, so I decided to turn it back on.
However, this did not help :( . I turned it on in msconfig again, but it won't start with windows anymore :(. I know it's the program I need, because when I manually launch the program (it's the program: programfiles/toshiba/TBS/HSON.exe ) the button works.
I did put a V in front of the program in msconfig, but that did not work. Anyone has an idea why not?
Edit: I found a solution, although not the best. If anyone ever has the same problem:
I made a shortcut from the program that had to run (can be found in C:programfiles/toshiba/TBS and is called HSON.exe). Next I clicked on start, and said "all programs", here I selected the folder "opstarten", this is the dutch version, but my guess is it is called something like "start up" in english. In this, I pasted (copy/cut -> paste) the shortcut to the program, and now it starts again :)

Hi!
I agree with Akuma. You should try to reinstall the Toshiba Value Added Package. This controls the media buttons, FN buttons and all special functions on the notebook.
Look on the Toshiba website for an update:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Bye

Quicktime won't start - have tried re-installing

I have installed itunes and quicktime but quicktime won't start. I tried un-installing both and re-installing but still quicktime will not start. When I click open quick time player I get an hourglass for 30 seconds and then nothing happens. I tried installing quicktime without itunes and have the same problem. Any suggestions would be greatly appreciated.

ahhhh. that's suggestive.
a few more questions aimed at narrowing in on possible culprits.
by any chance, when you attempt to uninstall QuickTime do you get a standalone "fatal error" message?
try launching your QuickTime Control panel. does it launch, or do you get an error message? if you get an error message, what does it say?
have you ever installed an ACE or K-Lite Mega Codec Pack, QT Alternative, or Storm Codec on your PC? if so, which version?

Control Strip in OS 9 won't start

Similar Messages

Maybe you are looking for