Control surface and interface at the same time

Is it possible to plug in a control surface and an interface at the same time? My plan is to use a Mackie Control Universal Pro (USB) for my control surface and a Focusrite Saffire Pro 40 IO Firewire Interface for monitor use during mixing. Will Logic Pro 9 allow me to do this?

Thank you

Similar Messages

Controlling Master and Headset at the same time

Hello,
I'm using GNOME 2.14 and using a laptop computer for all my needs. I've
3 controls (Volume Up, Down and Mute) on my laptop that I use to control
the Master channel. But if I connect a headset to listen to my music, I
have to manually change the volume from the mixer. Is there a option or
some kind of work around that I can control the Master and Headset
channels at the same time.. I want them to be the same always..?

If you have setup keyboard shortcuts to run specific commands with xbindkeys or the like, you can make them run these commands:
amixer set Master 1- & amixer set Headphone 1-
amixer set Master 1+ & amixer set Headphone 1+
You have to investigate how to match them as on my box the headphone command changes more than the master, so that you might need to use 3 -/+ from master to match 1 -/+ from headphones for example.

I've turned off home-sharing but remote still controls computer and itunes at the same time as the TV. What gives?!

I've turned off both home sharing and turned off the link from my computer to my remote via AppleTV but when I hit play on my remote to control appleTV, my itunes always opens and starts playing on my Macbook Pro. Has this happened to ahyone else? I cannot get it to stop. The only solution right now is to completely turn off my computer if I want to use appleTV.
Thanks

default then remotes control all devices unless you bind it to a device you do that in settings
and home sharing don't have any impact on remotes

Has anyone used switch control and siri at the same time?

Has anyone used accessibility switch control and siri at the same time?

Using Xmarks and Sync simultaneously will create a mess.
You can create a new profile, import the bookmarks from your main profile, and set up Sync for the new profile.
The flip side is, bookmarks from your main profile would not get synced with your new profile.
Alternatively, Xmarks is also available for Android.
https://play.google.com/store/apps/details?id=com.xmarks.android&hl=en

If I plug a guitar into iPhone GarageBand using an interface, can I still use the built in microphone to record vocals and guitar at the same time?

If I plug a guitar into iPhone GarageBand using an interface, can I still use the built in microphone to record vocals and guitar at the same time?

Hi John,
I think the only way is to get an iMic...
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=797644&is=REG&Q=&A=detail s

Can you run Edirol / Focusrite firewire interfaces at the same time?

Hey Guys,
I have an Edirol FA-101 but i'm just about to get a Focusrite Saffire (or maybe a Motu 8pre...haven't decided yet) and was wondering if I can run the 2 interfaces at the same time for more inputs...i know i can chain 2 of the edirol ones but i'm not sure if it works with different makes.
Thanks

so I actually did get myself a focusrite saffire pro 26 and it's pretty cool (apart from the focusrite computer side interface that seems to have a few bugs when you control by hardware...)
I'm probably gonna get myself an octopre or a twintrack pro to make use of at least some of the extra digital inputs but for now I have the semi redundant Edirol FA-101 in my rack, if I can get the two working together then that's great!
I have tried what you said and it did pair them together however it made a really awful noise when trying to record, just intense digital distortion and i'm not really sure why. I'm running it all from a macbook pro with only one FW port (that has the Saffire / Edirol / FW Hard drive / Liquid Mix running from it in that order) do you think this order is more the problem?
Dave

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

Can we use both INSERT and UPDATE at the same time in JDBC Receiver

Hi All,
I would like to know is it possible to use both INSERT and UPDATE at the same time in one interface because I have a requirement in which I have to perform both the task.
user send the file which contains both new and old record and I need to save those in MS SQL database.
If the record exist then use UPDATE otherwise use INSERT.
I looked on sdn but didn't find any blog which perform both the things at the same time.
Interface Requirement
FILE -
> PI -
> JDBC(INSERT & UPDATE)
I am thinking to use JDBC Lookup but not sure if it good to use for bulk record.
Can somebody please suggest me something or send me the link of any blog or anything to solve this problem.
Thanks,

Hi ,
          If I have understood properly the scenario properly,you are not performing insert and update together. As you posted
"If the record exist then use UPDATE otherwise use INSERT."
Thus you are performing either an insert or an update which depends on outcome of a search if the records already exist in database or not. Obviously to search the tables you need " select * from ... where ...." query. If your query returns some results you proceed with update since this means there are some old records already in database. If your query returns no rows you proceed with "insert into tablename....." since there are no old records present in database.
Now perhaps the best method to do the searching, taking a decision to insert or update, and finally insert or update operation is to be done by a stored procedure in MS SQL database. A stored procedure is a subroutine available to applications accessing a relational database system. Here the application is PI server.   If you need further help on how to write and call stored procedure in MS SQL you can look into these links
http://www.daniweb.com/web-development/databases/ms-sql/threads/146829
http://www.sqlteam.com/article/stored-procedures-parameters-inserts-and-updates
[ This part you can ignore, Since its not sure that you will face this situation
    Still you might face some problems while your scenario runs. Lets consider this scenario, after the stored procedure searches the database it found no rows. Thus you proceed with an insert operation. If your database table is being accessed by multiple applications (or users) other than yours then it is very well possible that after the search operation completed with a null result, an insert/update operation has been performed by some other application with the same primary key. Now when you are trying to insert another row with same primary key you get an error message like "duplicate entry not possible for same primary key value". Thus you need to be careful in this respect. MS SQL has a feature called "exclusive locks ". Look into these links for more details on the subject
http://msdn.microsoft.com/en-us/library/aa213039(v=sql.80).aspx
http://www.mssqlcity.com/Articles/Adm/SQL70Locks.htm
http://www.faqs.org/docs/ppbook/r27479.htm
http://msdn.microsoft.com/en-US/library/ms187373.aspx
http://msdn.microsoft.com/en-US/library/ms173763.aspx
http://msdn.microsoft.com/en-us/library/e7z8d5hf(v=vs.80).aspx
http://mssqlserver.wordpress.com/2006/11/08/locks-in-sql/
http://www.mollerus.net/tom/blog/2008/03/using_mssqls_nolock_for_faster_queries.html
    There must be other methods to avoid this problem. But the point is you need to be sure that all access to database for insert/update operations are isolated.
regards
Anupam

My SB Audigy 2 card can't use headset and musicamplifier at the same time

Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
please help, thx.
Michael

If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
Another option:
Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
--> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
= You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
.jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

How to control 8 current sources in the same time with labview?

Hi,
I'm a French student who have to create a program which is able to control 8 current sources in the same time.the aim is to plug the currents sources in the input of a laser.
If someone has an idea, it would be very nice to inform me !!!
Thanks in advance.
Nico31dcu

Is it really Tektronik or is it Tektronix. Tektronix is a major test equipment manufacturer. I can't find any reference to that model number on their site, though.
There are several resources for learning instrument control. One good place to start is http://zone.ni.com/devzone/cda/tut/p/id/4357.
Assuming that you have a NI GPIB controller for the pc, you will be using the Instrument I/O Assistant or the VISA commands to send/recieve data from the current sources. Without having access to the programming manual, I can't give specifics on what commands you need to send. Your topic mentions controlling them at the same time. Truly simultaneous control is possible in only a few situations. If you have a couple current sources in the same mainframe, you may be able to send a single command to set them all. It will really depend on the commands that the vendor has implemented. With separate mainframes, you will send commands first to one, and then another, etc. Again, depending on what the vendor has implemented, it may be possible to sequentially program all sources to a ready state and then trigger all simultaneously.

Datasocket help, want to use the same(one .ocx only) in VB and HTML at the same time

I want to create one ActiveX control that can be use in VB and HTML. My control will consist 1 CommandButton, 1 TextBox and 1 Label.
My Objective is to have real time data passing between the same control which will be used at VB and HTML at the same time.
For example, from HTML if I click a button, the text at textbox at HTML will be pass to the label at VB at the same time. And vice versa where when button at VB is click, the text at textbox at VB will be pass to the label at HTML.
Help me.

Hello Sam R.,
The ActiveX will be written in VB6 with Measurement Studio6. It's some sort of tutorial lesson for me to test the capability of DataSocket.
I want to create 1 control which will act as reader and writer. I am using Windows XP with IIS as web server and testing using 1 open VB6 Form with the control and 1 HTML file with the control using Data Socket Server with dstp://localhost/something. I dont know whether I need to have the script or not, what ever can do. tell me if it is the way to do. If it can be program directly in the control is better.
Basically, yes. the command button inside the control should updates both label and textbox.
If you can say that 1 datasocket control is enough, I will follow your advice because you are the expert.
I try before by using the example in DSReader and DSWriter but I cannot do the 'real time' updating when I click either button in VB6 or HTML page. It can only updated when I click again the commandbutton and

Charge ipod and listen at the same time?

hi,
i sit at my desk for about 8 hours at work and would like to charge my ipod at my computer via usb and listen at the same time. is this possible? it's a pc computer here at work. and it does not have itunes installed and i don't see having itunes on it as a possibility.
i don't like having to charge it, wait about an hour, then listen for a few hours, then charge it again.
also, do you notice any battery "leakage"? i mean, i have some battery power at night when i turn it off, (yes, i do turn it off b/c the screen goes blank) and then when i get into work and try to turn it on, i get this battery looking thing and have to charge it.
it's possible that the ipod came on while i was walking (it's in my bag), but this happens too often for me to think that it does.

You'll need iTunes if you want to access your iPod and listen through your PC. Also you'll need to set it to manual update, see the articles below.
Using iPod with Multiple computers
Managing Your Songs Manually
When your iPod is in your pocket make sure you have the lock on to disable the controls otherwise it is liable to get switched on and use battery power.

IP over Firewire and ethernet at the same time?

Is it possible to use both IP over Firewire and ethernet at the same time?
I want to use my TB hard drive attached to one Mac via Firewire 800 to backup another Mac also attached to the same drive via Firewire 800. I can only mount the drive on one machine at a time so I need to share it out to the other Mac. It works great if I set it up to do strait IP over Firewire, with static IPs, but that means I can't connect to the internet because my ethernet connection on both machines becomes the secondary connection method. Similarly, if ethernet is primary then I can't connect via Firewire. Is there a way to set it up so the Macs will know which method to use depending on the IP address?
I am using 10.5.1 on both machines.
G5, 1.8 GHz, 15.GB RAM
MBP, 2.4 GHz, 4GB RAM
Thanks!

Certainly.
In the network control panel I set Built-in FireWire to the top of the service order list, followed by Built-in Ethernet.
Next, I set Built-in FireWire to Configure Manually with the address 192.168.1.xxx and the Subnet Mask to 255.255.255.xxx, making sure the Subnet Mask is set the same on both machines and that the IP address is different on both machines and different from the Built-in Ethernet addresses.
I applied the settings, turned on Sharing on both machines, then mounted whatever shared drives I needed by connecting to the other machine using the FireWire IP address.
Now I am able to share drives using FireWire 800 - which works great when used with Time Machine - and still use my normal ethernet to surf, etc..

Airport extreme wired AND wireless at the same time?

Very sorry for this newbie question. Can i have my iMac wired to my computer with ethernet and wireless at the same time?
If so, what ports to i plug what into?
My guess is modem-wan port on extreme and a cable going wired from the ethernet port on the extreme to the iMac?
Do i need to do any configuring?
Thanks!

The operatibe word here is EXPRESS
To the best of my knowledge the ethernet port on the express is for ethernet IN not out
http://manuals.info.apple.com/en/AirPortExpressSetupGuide.pdf The pertinent diagrams are like page 20 - 25
Now you can actually do what you are talking about with an extreme.. an extreme can, in theorey operate as an remote/relay taking incoming signal giving you one - four out bound ethernet ports
that info can be found in the manual on setting up a WDS
the only thing to remember is .. the weakest leg controls.. if your wireless signal to the relay is poor. any thing using the relay for access will also be poor
I have found out the hard way about that
hey you can get good price on bulk cat 5

IPhone 4s , when I call and charging at the same time, I felt like been shocked when my ear close to the phone?

iPhone 4s , when I call and charging at the same time, I felt like been shocked when my ear close to the phone?

Talk to your email provider. They control their servers and what happens to your email.

Control surface and interface at the same time

Similar Messages

Maybe you are looking for