Control the use of material code

Hi there,
which field of the DB table MARA (or whichever) controls the use of material as sales code and manufacturing code - DISST? Like STLAN of the structue RC29N.
The request is to list all material codes with its "flag" to build a list of 2 columns:
Sales material code >< Parcel code/lower item
Thanks for your inputs
RB

I found it. EXIT_SAPLV01Z_001 does the trick. A package contains many User-Exits, BADIs and enhancement points, so it took me a while to go thru all of them.

Similar Messages

What is the use of T-code COMAC ?

Hi all,
I want to know the use of T-code COMAC and What is the significance of two tabs u201Cselectionu201D and u201CMass processing-material availability check ?u201D in this T-code.
Thanks

hi,
In collective availability check, you can check the material availability of several orders at the same time. These collective availability checks always carry out an overall availability check for each of the orders.
You can check production orders or planned orders in this way. As with individual checks, the checking rule is determined via the order type (production orders) or the MRP group / plant parameters (planned order).
On selection tab page you can restrict your selection plant wise, material wise,for production plant, for production plant,for mrp controller and so on other selection criterias are there.
Mass processing-material avail.check in function field you can select matl.avail.check and execute function let's you to start the function immedeately or in the background.
regards,
Lodhi.S

What is the use of T.Code: FAGLCOFIFLUP - Post CO Documents to FI?

Expects...
What is the use of T.Code: FAGLCOFIFLUP - Post CO Documents to FI
Accounting> Financial Accounting> General Ledger> Corrections> FAGLCOFIFLUP - Post CO Documents to FI
Thanks & Regards
Bhagiradha.P

Hi,
The real-time integration of Controlling with Financial Accounting was active at the time the CO documents were posted.
CO documents could be not transferred to financial accounting on behalf of errors which are only known to occur in the following situations:
- During mass processing such as internal CO assessments or distributions
- Manual posting of individual CO documents is not possible if errors occur in financial accounting.
- If real-time integration was not active when the CO document was posted, you must use the report FAGL_COFI_TRANSFER_CODOCS to transfer these CO documents to financial accounting because they are not in the worklist.
Regards,
Eli

How to Increase the length of Material Code (MATNR)

Hi all,
I have the requirement to increase the size of Material code (from 18 characters to 30 Characters) .
Is their any provision for this in ERP 2005.
Let me know.
regards,
Sheo

You should not increase the length of the field.
You can do it by changing the domain for MATNR, but then you have to modify all programs and screens where MATNR is used.
The only impact of this is that SAP will disown your implementation and will not provide any free support. You have to pay their hefty consulting fee every time
Hope this answers,
Lakshman

Using Long Material Code(LMN)

Is there any negative impact on transactions, if we use 40Char's Long Material Code (LMN). Because our material code is 25char.

Dear Gururaj,
Creating material code is very easy in SAP but effective using those codes for day to day transaction is important. End users should be made familier with material code by giving proper training. Material code length is also depend on the business requirements. If you are using lakhs of materials in your business then you should go for the long material code otherwise short material code would be useful.
If in your business, people are using or will use long material code in effective manner there will be no negative impact on any of your transaction.
Amit

What is the use of T. code cj8g

Hi All,
Can anybody explain me what is the use of T.code CJ8G.If we execute this transaction. what is the effect on cost center and wbs element.before executing this Actual settlement. what configuration is to be done pior.
Thanks in Advance.
Chandu

CJ8G is a T Code which processes the settlement collectively. You create a varaint (group of projects) and the execute the settlement, which then moves the cost out of the WBS elements to any receiver such as cost centres etc.,
CJ88 processes the settlement individually.
For settlement to run, you need to do certain configuration and maintain the master data;
Configuration:
Allocation Structure (Source Cost Elements, Settlement cost element/By Cost Element)
Settlement Profile
Master data:
Maintain the settlement rules (receiver i.e, CTR-Cost Centre etc) on the WBS.
Regards
Sreenivas

What is the use of T.Code FBZ2

Hi Experts
I want to know the use of T.Code FBZ2 and what is the difference between the F-53 and FBZ2?
Can I print the cheques or Payment Advices for the T.Code FBZ2.
Please clearify my doubt.
Thanks.
Priya

HI, priya,
it is not possible to use fbz2 becz as per SAP standard you have to use for payment advice f-58 tr.code only come to fbz2 is the manual say suppose if you want to change document type u can use that tr.code and that is not advisable.
better to use f-58 if you want payment advise.
Regards,
saltish

What is the use of restriction code in the ipod?

i'm just wondering what's the use of restriction code because i have this problem, i wanted to lock the camera whenever someone takes a picture on my ipod they can't delete and upload it to there computer, so how to will i do that or how to do that thing?

Yes, you can setup/turn on restrictions to prevent use of the Camera app. See:
iPhone, iPad, and iPod touch: Understanding Restrictions
Make sure you do not have any third-party camera apps installed and turn on the restriction that prevent installing apps.

What is the use of transaction code FAGLGA15

What is the use of transaction code FAGLGA15.What is its functionality.Please help.

Hello,
Yes, you are right. Before ECC 6.0 version the TC: KSU5 has been used for actual assessment. Now in ECC 6.0 the same transaction code has been changed to FAGLGA15. You can execute the actual assessment in test run and if it is ok then run in background.
Thanks
Para

What is the use of SWIFT CODE IN BANK ACCOUNTS

What is the use of SWIFT CODE IN BANK ACCOUNTS

HI kishore,
The SWIFT code is used for identifying banks in international payment transactions.
see these links for your refernece
http://sapexperts.blogspot.com/2007/01/bank-accounts.html
http://www.answers.com/topic/international-bank-account-number
thanks
karthik

What is the use of transaction code VF24

what is the use of transaction code VF24. if possible please provide some documentation

Hi,
The main use of VF24 transaction code : edit work list for invoice list.
This enables the user to understand the processes left during the combine processing of invoices.
like which are left for releasing to accounts, which have still pending payment posting, with respect to the invoice list consisting of the combination of invoices.
invoice list is a combination of different invoices with same critierias. so to check and process these invoice lists collectively this function is used.
regards,
siddharth.
regards,
Siddharth.

What is the use of t-code MD74 - Reorganising independant requirements

what is the use of t-code MD74 - Reorganising independant requirements

basically it to delete the unwanted PIR for the last period.
Let us say you planned PIR for 100.
At the end of Period the total salae order were 90, PIR shows 10 excess, this has to be deleted. We can do it manually, but this can be done collectively
pl go through the link below
http://help.sap.com/saphelp_47x200/helpdata/en/cb/7f9b7043b711d189410000e829fbbd/frameset.htm
With the reorganization function, you can delete planned independent requirements for which there are no sales orders in the database. You can delete the planned independent requirements history.
A key date is required to carry out reorganization which is calculated as follows: the system checks whether a reorganizing interval is maintained in Customizing for the plant that you want to reorganize. If an interval is maintained for this plant, the system uses this information to calculate the key date. If no interval is maintained for this plant, the system checks whether intervals are maintained for any other plants, and selects the largest interval to calculate the key date. You can change the key date proposed in the initial screen for reorganization.
You can change the proposed key date when deleting the history. You can set a shorter interval for deleting histories than for deleting the requirements records.

Cross Plant Planning- MRP activation indicator turned after the creation of Material code

Dear Experts,
Working on Cross plant planning, where 1001 Production plant will stock transfer material to 8 different plants.
Right now, only 10001 plant had MRP and planning file entry ticked in customizing OMDU.
The other 8 plants have Materials codes created and MRP views extended but no MRP activation is ticked.
Now, to have Cross plant planning MRP set, I have done necessary configurations, Scope of Planning, Special Procurement 40, and parallel processing is configured. All master datas are set properly. Tested few scenarios in IDES, working fine.
If my understanding is clear, than I thin I need to run MDAB, activation of planning file and MDRE, Planning file Consistency Check, because MRP will run in background?
Is this correct or something more needs to be done ?? Please suggest
Please also tell what is the use of MDRE t code.
Best regards
Shailesh

Hello Shailesh
MDAB (RMMDVM20) is at plant level, you need to create different variants as per your plants
Create a variant for the new plants and then schedule a job for these variants.
Check customizing transaction OMDU -> set up planning file
entry and consistency check of planning file entries.
Best Regards,
R.Brahmankar

What is the use of t-code rsa3??

use of T-code::RSA3??when 2 use it and how 2 use it??

Hello,
Tcode RSA3 is an extractor checker.
Uses: It will give you the number of records extracted. Then go to BW Monitor to check the number of records in the PSA and check to see if it is the same & also in the monitor header tab.
RSA3 is a simple extractor checker program that allows you to rule out extracts problems in R/3. It is simple to use, but only really tells you if the extractor works. Since records that get updated into Cubes/ODS structures are controlled by Update Rules, you will not be able to determine what is in the Cube compared to what is in the R/3 environment. You will need to compare records on a 1:1 basis against records in R/3 transactions for the functional area in question. I would recommend enlisting the help of the end user community to assist since they presumably know the data.
To use RSA3, go to it and enter the extractor ex: 2LIS_02_HDR. Click execute and you will see the record count, you can also go to display that data. You are not modifying anything so what you do in RSA3 has no effect on data quality afterwards. However, it will not tell you how many records should be expected in BW for a given load. You have that information in the monitor RSMO during and after data loads. From RSMO for a given load you can determine how many records were passed through the transfer rules from R/3, how many targets were updated, and how many records passed through the Update Rules. It also gives you error messages from the PSA.
Hope it helps.
Regards,
Amit

How can we use same material code for two different sales area

Hello friendsu2026
Hope you all doing well
I am facing a problem and I will be thankful to all of you, for your suggestions
Issue:
I have a *material created in 3000/10/19 for domestic purpose *,now our company has decided to export it for that we have created a new sales are 3000/13/20 for export,we cannot create the salesa are as 3000/13/19 due to some company issues,
Is there any way how I can use the material already in 3000/10/19 into new sales area 3000/13/20.
Will common distribution channel and division concept will be applicable here
As the material is same,and we donu2019t want to go for any more new material code. *
Thanks
Siddharth Sharma

Hi Sharma,
when a material is used in domestic and exports.....i hope it should be seggreagated based on dist chnl.......but not division.
because material is Division specific. it can be there in only one division. like mother child relation.
that is the reason why...... it is maintained inside BASIC DATA...... but not in input screen while creating material master.[unlike dist chnl]
because a material can be in multiple dist chnl....but not multiple division.
I feel only alternative is creating new material if you are already decided to devide the sales by division for domestic and foriegn.
Purpose of common dist chnl/div is to maintain pricing/condition in one common whenever you change master data.......
hope this gives you the clarity
regards
Satya.SCM

Control the use of material code

Similar Messages

Maybe you are looking for