"Control transaction cannot be completed at this time" IPS Problem

Hi,
Yesterday the module AIP-SSM-20 of the customer for second time in the last 5 month present a error on the sensor and is just the sensor stop the analyzed of packet.
When the problem is present you can access the management interface, the interface respond de ICMP packet, you can monitoring event but  just show me the same 3 event, that show you below:
evError: eventId=1351437734660979649  vendor=Cisco  severity=error 
  originator:  
    hostId: IPS-INTERNET-BEX-1 
    appName: collaborationApp 
    appInstanceId: 485 
  time: ene 14, 2013 10:09:27 UTC  offset=-270  timeZone=GMT-04:30 
  errorMessage: Control transaction cannot be completed at this time
Messages, like this one, in the category - ct to sensorApp timed out - were logged 222 times in the last 14433 seconds.  name=errUnclassified 
The two time that this problem was happening I just reload the sensor and then it´s work again.
My question is; why the sensor stop analyzed packet?
Could be the ASA?
Best regard.

It could be a issue with IPS. You need to collect show-tech-support and contact Cisco TAC. Logs may have relevant information as to why packet inspection had stopped.
Regards,
Sawan Gupta

Similar Messages

  • I am trying to buy the app "bridge baron" and it said it cannot be completed at this time

    I am trying to buy the app "bridge baron" and it said it cannot be completed at this time.   Can someone help me?

    Hello Cathy4421,
    There may be an issue with the App Store's connection to the iTunes Store. The following article can help you restore that connection.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    Allen

  • HT4623 I have attempted to download the current upgrade about a dozen times. Every time I get to near the end and get an error message that just says the download cannot be completed at this time. What's the deal?

    I am attempting to download the new update for my iPad. It gets approx half thru the process and then I get an error message. States that I cannot
    Download the update at this time. I have done this at least a dozen times. Still cannot complete the update,
    What's the deal?

    either in your anti-virus control panel or your windows control panel, depending on which one you have turned on.

  • HT4009 I'm trying to buy an in-app purchase, but its saying it cannot be completed at this time and to contact apple support. Any suggestions?

    And to contact apple support. Then it says, iTunes connection is lost. Any suggestions ?

    Click here and request assistance.
    (83993)

  • This transaction cannot be completed ..

    I saw many post that are related to this title but none of them can help. I can't complete my transaction, i send only 8.99 US$ to another by email. But it keeps showing:" This transaction cannot be completed.. ". My account and my card are verified. I don't know why it show this error with no information provided. I really need help with this. Thank you.

     Personal Payments are not available to all accounts and/or all countries.  Do you and the recipient have US PayPal accounts? -Sandy

  • I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

    I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
    i tried adding user macintosh hd/users/your_user/pictures/"photo booth"  but still photo booth is not working and even images in photo booth cant be deleted they keep coming back

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use  another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • [help me] Oracle 10G + ASM "ORA-00376: file 5 cannot be read at this time"

    We have used Oracle 10G R2 RAC + ASM on Redhat 4 (EMC cx700 Storage)
    I found below errors on alert log and can't inserted, updated and deleted datas in database.
    Sun May 27 01:12:34 2007
    SUCCESS: diskgroup ARCH was mounted
    SUCCESS: diskgroup ARCH was dismounted
    SUCCESS: diskgroup ARCH was mounted
    SUCCESS: diskgroup ARCH was dismounted
    SUCCESS: diskgroup ARCH was mounted
    SUCCESS: diskgroup ARCH was dismounted
    Sun May 27 01:19:11 2007
    Errors in file /oracle/product/admin/DB/udump/db3_ora_15854.trc:
    ORA-00376: file 5 cannot read at this time
    ORA-01110: data file 5: '+DATA/db/datafile/undotbs3.257.617849281'
    ORA-00376: file 5 cannot be read at this time
    ORA-01110: data file 5: '+DATA/db/datafile/undotbs3.257.617849281'
    ORA-00376: file 5 cannot be read at this time
    ORA-01110: data file 5: '+DATA/db/datafile/undotbs3.257.617849281'
    ORA-00372: file 5 cannot be modified at this time
    ORA-01110: data file 5: '+DATA/db/datafile/undotbs3.257.617849281'
    So:
    I checked and recovered data file
    SQL> select name,status,file# from v$datafile where status ='RECOVER';
    NAME
    STATUS FILE#
    +DATA/db/datafile/undotbs3.257.617849281
    RECOVER 5
    RMAN> run {
    allocate channel t1 type 'SBT_TAPE';
    allocate channel t2 type DISK;
    recover datafile 5;
    recover completed.
    SQL> alter database datafile 5 online;
    Butttttttttttttttttt:
    What is going on?
    I checked EMC storage, not found any disk error.
    I checked alert log of ASM, no found anything.
    I don't know What the problem ?
    Because I had the same problem 2 days ago.
    This day error on undo datafile node 3.
    2 days aGo; error on undo node 4.
    Please please anybody
    What bug or anything wrong ?
    Please introduce me
    trace file:
    /oracle/product/admin/DB/udump/db3_ora_15854.trc
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
    With the Partitioning, Real Application Clusters, OLAP and Data Mining options
    ORACLE_HOME = /oracle/product/10.2.0/db
    System name: Linux
    Node name: db03.domain
    Release: 2.6.9-42.ELsmp
    Version: #1 SMP Wed Jul 12 23:32:02 EDT 2006
    Machine: x86_64
    Instance name: DB3
    Redo thread mounted by this instance: 3
    Oracle process number: 65
    Unix process pid: 15854, image: [email protected]
    *** SERVICE NAME:(DB) 2007-05-27 01:19:11.574
    *** SESSION ID:(591.62658) 2007-05-27 01:19:11.574
    *** 2007-05-27 01:19:11.574
    ksedmp: internal or fatal error
    ORA-00376: file 5 cannot be read at this time
    ORA-01110: data file 5: '+DATA/db/datafile/undotbs3.257.617849281'
    ORA-00376: file 5 cannot be read at this time
    ORA-01110: data file 5: '+DATA/db/datafile/undotbs3.257.617849281'
    ORA-00376: file 5 cannot be read at this time
    ORA-01110: data file 5: '+DATA/db/datafile/undotbs3.257.617849281'
    ORA-00372: file 5 cannot be modified at this time
    ORA-01110: data file 5: '+DATA/db/datafile/undotbs3.257.617849281'
    Current SQL statement for this session:
    INSERT INTO DATA_ALL VALUES (:B1 ,:B2 ,:B3 ,:B4 ,:B5 ,:B6 ,:B7 ,:B8 ,:B9 ,:B10 ,:B11 ,:B12 ,:B13 ,:B14 ,:B15 ,:B16 ,:B17 ,:B18 ,:B19 ,:B20 ,:B21 ,:B22 ,:B23 ,:B24 ,:B25 ,:B26 ,:B27 ,:B28 ,:B29 ,:B30 ,:B31 ,:B32 ,:B33 ,:B34 ,:B35 ,:B36 ,:B37 ,:B38 ,:B39 ,:B40 ,:B41 ,:B42 ,:B43 ,:B44 ,:B45 ,:B46 ,:B47 ,:B48 ,:B49 ,:B50 )
    ----- PL/SQL Call Stack -----
    object line object
    handle number name
    0x21dc2b4b8 780 package body MGR.AC
    0x21e4815b0 3 anonymous block
    ----- Call Stack Trace -----
    calling call entry argument values in hex
    location type point (? means dubious value)
    ksedst()+31 call ksedst1() 000000000 ? 000000001 ?
    7FBFFF7290 ? 7FBFFF72F0 ?
    7FBFFF7230 ? 000000000 ?
    ksedmp()+610 call ksedst() 000000000 ? 000000001 ?
    7FBFFF7290 ? 7FBFFF72F0 ?
    7FBFFF7230 ? 000000000 ?
    ksupop()+3581 call ksedmp() 000000003 ? 000000001 ?
    7FBFFF7290 ? 7FBFFF72F0 ?
    7FBFFF7230 ? 000000000 ?
    opiodr()+3899 call ksupop() 000000002 ? 000000001 ?
    7FBFFF7290 ? 7FBFFF72F0 ?
    7FBFFF7230 ? 000000000 ?
    rpidrus()+198 call opiodr() 000000066 ? 000000006 ?
    .......etc.............................
    Message was edited by:
    HunterX (Surachart Opun)

    To me it looks like your undotbs on node3 is filled and not marking old undo as expired. Use this query to find out if it is labeling old undo as expired.
    SELECT tablespace_name, status, COUNT(*) AS HOW_MANY
    FROM dba_undo_extents
    GROUP BY tablespace_name, status;
    Another thing I noticed from your alertlog is it is only doing that on undotbs3, which I assumes is on node3.
    1) try recreate undotbs on node3
    2) take node3 out of service (stop nodeapps, ASM, instance and finally CRS on node3) and see if you can do DML on your database.
    -Moid

  • SQL error 376: 'ORA-00376: file 12 cannot be read at this time

    While installing Appl Patch set SAPKH70010- SAPKH70013 I received followingerror ,
    SQL_fehler in der Datenbank beim Zugriff auf eine
    Following is output of the dev_w0 logfile.
    C SELECT TLINE, SEQNO FROM SNAPT WHERE LANGU = :A0 AND ERRID = :A1 AND TTYPE = :A2 ORDER BY SEQNO;
    B ***LOG BY2=> sql error 376 performing FET dbds#1 @ 592 dbds 0592
    B ***LOG BY0=> ORA-00376: file 12 cannot be read at this time
    ORA-01110: data file 12: '/oracle/RTQ/sapdata2/sr3_9/sr3.data9' dbds#1 @ 592 dbds 0592
    C OCI-call failed with -1=OCI_ERROR
    C SQL error 376: 'ORA-00376: file 12 cannot be read at this time
    C ORA-01110: data file 12: '/oracle/RTQ/sapdata2/sr3_9/sr3.data9''
    C *** ERROR => Error 376 in stmt_fetch() from oci_execute_stmt(), orpc=0
    http://dbsloci.c 12861
    C *** ERROR => ORA-376 occurred when executing SQL stmt (parse error offset=0)
    http://dbsloci.c 12880
    C sc_p=0x106d644c8,no=227,idc_p=(nil),con=0,act=1,slen=95,smax=256,#vars=3,stmt=0x108563c80,table=SNAPT
    C SELECT TLINE, SEQNO FROM SNAPT WHERE LANGU = :A0 AND ERRID = :A1 AND TTYPE = :A2 ORDER BY SEQNO;
    C sc_p=0x106d644c8,no=227,idc_p=(nil),con=0,act=1,slen=95,smax=256,#vars=3,stmt=0x108563c80,table=SNAPT
    C prep=0,lit=0,nsql=1,lobret=0,#exec=1,dbcnt=0,upsh_p=(nil),ocistmth_p=0x1085649b0
    C IN : cols=3,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=42,vmax=32,bound=1,iobuf_p=0x1070cf7d0,vda_p=0x1074f664
    0
    C lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
    C OUT: cols=2,rmax=208,xcnt=208,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=152,vmax=32,bound=1,iobuf_p=0x1070e9f50,vda_p=0x108
    565000
    According this i checked file
    ORA-01110: data file 12: '/oracle/RTQ/sapdata2/sr3_9/sr3.data9''
    This file is in RECOVER mode.
    my SAP application ECC6.9 is running.
    Oracle is also running.
    I do not have any oracle backup
    For any transaction the system is giving following error,
    "SQL_fehler in der Datenbank beim Zugriff auf eine"
    Please advice.

    Hi PushpaMitra,
    Check below note.
    Note 328785 - ORA-00376: File cannot be read at this time
    Regards
    Ashok

  • ORA-00376: file 2 cannot be read at this time

    Hi,
    Our SAP system is down. When checked I found PSAPUNDO tablespace needs recovery. (From SYSSMU1$ to SYSSMU10$ NEEDS RECOVERY and SYSSMU11$ to SYSSMU17$ are offline).
    So I have created another tablespace PSAPUNDO2 and altered the system.
    SQL >create undo tablespace PSAPUNDO2 datafile 'D:\Oracle\SOL\sapdata1\undo_2\UNDO.DATA2' size 700MB;
    SQL>alter system set undo_tablespace=PSAPUNDO2 scope=spfile;
    I have changed undo_management to Manual. And I have not dropped old tablespace PSAPUNDO yet,
    I have restarted the system and initially the database was not open.
    I gave command alter database open and opened it.
    The oracle has been started normally. But still SAP instance cannot be started.
    Last few lines of aler log:
    Sun Jan 06 04:05:12 2013
    Completed: ALTER DATABASE OPEN
    Sun Jan 06 04:06:08 2013
    Shutting down archive processes
    Sun Jan 06 04:06:13 2013
    ARCH shutting down
    ARC2: Archival stopped
    Adjusting the default value of parameter parallel_max_servers
    from 160 to 65 due to the value of parameter processes (80)
    Sun Jan 06 04:06:29 2013
    Starting ORACLE instance (normal)
    Sun Jan 06 04:14:09 2013
    Errors in file d:\oracle\sol\saptrace\background\sol_smon_3796.trc:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-00376: file 2 cannot be read at this time
    ORA-01110: data file 2: 'D:\ORACLE\SOL\SAPDATA1\UNDO_1\UNDO.DATA1'
    Now when i give command:
    show parameter undo, I got the table_space name as PSAPUNDO2.But if I give command
    SQL> select segment_name,owner,tablespace_name,status from dba_rollback_segs;
    I am getting PSAPUNDO as the tablespace insteadof PSAPUNDO2. PSAPUNDO tablespace needs recovery. (From SYSSMU1$ to SYSSMU10$ NEEDS RECOVERY and SYSSMU11$ to SYSSMU17$ are offline).
    Also
    In BRTOOLS, in show tablespace command I cannot see the new tablespace PSAPUNDO2.
    Kindly suggest how to resolve this issue.

    Hi,
    Thanks for your reply. When I checked SAP down issue(around 6th Dec) I had exteneded the tablespace PSAPUNO and PSAPSR3 with brtools and restarted the server.
    Then I checked further and found the problem was PSAPUNDO needs recovery.
    Then I created another tablespace PSAPUNDO2 and altered system. (See my previous post).
    Now as you told I checked alert log history to check when the problem started and found the following:
    Incremental checkpoint up to RBA [0x2aad.15fb6.0], current log tail at RBA [0x2aad.15ff4.0]
    Sun Dec 02 19:01:16 2012
    Beginning log switch checkpoint up to RBA [0x2aae.2.10], SCN: 179359877
    Thread 1 advanced to log sequence 10926
    Current log# 2 seq# 10926 mem# 0: D:\ORACLE\SOL\ORIGLOGB\LOG_G12M1.DBF
    Current log# 2 seq# 10926 mem# 1: C:\ORACLE\SOL\MIRRLOGB\LOG_G12M2.DBF
    Sun Dec 02 19:06:21 2012
    Completed checkpoint up to RBA [0x2aae.2.10], SCN: 179359877
    Sun Dec 02 19:25:04 2012
    Incremental checkpoint up to RBA [0x2aae.2d36.0], current log tail at RBA [0x2aae.2e11.0]
    Sun Dec 02 19:30:00 2012
    KCF: write/open error block=0x19 online=1
    file=2 D:\ORACLE\SOL\SAPDATA1\UNDO_1\UNDO.DATA1
    error=27072 txt: 'OSD-04008: WriteFile() failure, unable to write to file
    O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.'
    Automatic datafile offline due to write error on
    file 2: D:\ORACLE\SOL\SAPDATA1\UNDO_1\UNDO.DATA1
    Sun Dec 02 19:30:01 2012
    Errors in file d:\oracle\sol\saptrace\usertrace\sol_ora_5408.trc:
    ORA-00376: file 2 cannot be read at this time
    ORA-01110: data file 2: 'D:\ORACLE\SOL\SAPDATA1\UNDO_1\UNDO.DATA1'
    ORA-00376: file 2 cannot be read at this time
    I am not sure what caused this error: ORA-00376: file 2 cannot be read at this time
    I think there is no issue with Parallel_Max_Server as I can see its entry in Alert log since 2007.
    Thu Oct 25 20:48:48 2007
    Adjusting the default value of parameter parallel_max_servers
    from 160 to 65 due to the value of parameter processes (80)
    Thu Oct 25 20:48:48 2007
    Starting ORACLE instance (normal)
    Will wait for your reply.
    Edited by: 980149 on Jan 6, 2013 9:32 AM

  • ORA-00376: file 24 cannot be read at this time

    Hi,
    DB 10.2.0.4
    AIX 5.3
    PROD
    When i am trying to start database i got below error.kindly suggest me.
    SQL> startup
    ORACLE instance started.
    Total System Global Area 5368709120 bytes
    Fixed Size 2091632 bytes
    Variable Size 2399143312 bytes
    Database Buffers 2952790016 bytes
    Redo Buffers 14684160 bytes
    Database mounted.
    ORA-00376: file 24 cannot be read at this time
    ORA-01110: data file 27: '/vol01/oracle/undo_.dbf'
    Thanks
    Edited by: user13382934 on Apr 21, 2011 2:05 PM

    In trace file find below
    ORA-00376: file 27 cannot be read at this time
    ORA-01110: data file 27: '/vol01/oracle/data/undo.dbf'
    Parallel Transaction recovery caught exception 376
    Parallel Transaction recovery caught error 376
    *** 2011-04-21 19:09:26.615
    SMON: following errors trapped and ignored:
    ORA-00376: file 27 cannot be read at this time
    ORA-01110: data file 27: '/vol01/oracle/data/undo.dbf'
    Parallel Transaction recovery caught exception 376
    Parallel Transaction recovery caught error 376
    *** 2011-04-21 19:09:27.633
    SMON: following errors trapped and ignored:
    ORA-00376: file 27 cannot be read at this time
    ORA-01110: data file 27: '/vol01/oracle/data/undo.dbf'
    Parallel Transaction recovery caught exception 376
    Parallel Transaction recovery caught error 376
    *** 2011-04-21 19:09:28.651
    SMON: following errors trapped and ignored:
    ORA-00376: file 24 cannot be read at this time
    ORA-01110: data file 27: '/vol01/oracle/data//undo.dbf'
    In alert log file
    *** 2011-04-21 20:18:16.178
    SMON: following errors trapped and ignored:
    ORA-00376: file 24 cannot be read at this time
    ORA-01110: data file 27: '/vol01/oracle/data/undo.dbf'
    MMNL absent for 4286 secs; Foregrounds taking over
    MMNL absent for 4286 secs; Foregrounds taking over
    MMNL absent for 4286 secs; Foregrounds taking over
    MMNL absent for 4286 secs; Foregrounds taking over
    Thu Apr 21 20:20:26 2011
    Errors in file /vol01/oracle/admin/bdump/dev_smon_516148.trc:
    ORA-00376: file 27 cannot be read at this time
    ORA-01110: data file 27: '/vol01/oracle/data/undo.dbf'
    Thu Apr 21 20:20:36 2011
    Errors in file /vol01/oracle/admin/bdump/dev_smon_516148.trc:
    ORA-00376: file 27 cannot be read at this time
    ORA-01110: data file 27: '/vol01/oracle/data/undo.dbf'
    Kindly update me,
    http://www.oracle.cc/2008/06/case-study-recover-database-after-crash-of-storage-array-linux-error-5-ora-01243-ora-00376.html
    This link is giving solution for the same,confirm me
    Thanks
    Edited by: user13382934 on Apr 21, 2011 2:15 PM
    Edited by: user13382934 on Apr 21, 2011 2:19 PM

  • ORA-00376: file 30 cannot be read at this time

    hi
    iam new for appsdba
    iam facing the below problem can any one help me.
    [appldev@ebs idev_ebs]$ ./adstrtal.sh apps/apps
    You are running adstrtal.sh version 115.16
    Executing service control script:
    /devc/p01/oracle/pixcomn/admin/scripts/idev_ebs/adapcctl.sh start
    script returned:
    adapcctl.sh version 115.47
    ORACLE error 376 in afpgdbcf
    Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
    ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
    ORA-06512: at "APPS.FND_CORE_LOG", line 22
    ORA-06512: at "APPS.FND_PROFILE", line 99
    ORA-06512: at "APPS.FND_WEB_CONFIG", line .
    The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
    Starting Apache Web Server Listener (dedicated HTTP) ...
    ORACLE error 376 in afpgdbcf
    Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
    ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
    ORA-06512: at "APPS.FND_CORE_LOG", line 22
    ORA-06512: at "APPS.FND_PROFILE", line 99
    ORA-06512: at "APPS.FND_WEB_CONFIG", line .
    The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
    ORACLE error 376 in afpgdbcf
    Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
    ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
    ORA-06512: at "APPS.FND_CORE_LOG", line 22
    ORA-06512: at "APPS.FND_PROFILE", line 99
    ORA-06512: at "APPS.FND_WEB_CONFIG", line .
    The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
    Starting Apache Web Server Listener (dedicated PLSQL) ...
    ORACLE error 376 in afpgdbcf
    Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
    ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
    ORA-06512: at "APPS.FND_CORE_LOG", line 22
    ORA-06512: at "APPS.FND_PROFILE", line 99
    ORA-06512: at "APPS.FND_WEB_CONFIG", line .
    The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
    adapcctl.sh: exiting with status 0
    .end std out.
    .end err out.
    Executing service control script:
    /devc/p01/oracle/pixcomn/admin/scripts/idev_ebs/adalnctl.sh start
    script returned:
    adalnctl.sh version
    Checking for FNDFS executable.
    Starting listener process APPS_idev.
    adalnctl.sh: exiting with status 0
    .end std out.
    .end err out.
    Executing service control script:
    /devc/p01/oracle/pixcomn/admin/scripts/idev_ebs/adcmctl.sh start
    script returned:
    You are running adcmctl.sh version 115.24
    Starting concurrent manager for idev ...
    Starting idev_0628@idev Internal Concurrent Manager
    Default printer is noprint
    adcmctl.sh: exiting with status 0
    .end std out.
    .end err out.
    Executing service control script:
    /devc/p01/oracle/pixcomn/admin/scripts/idev_ebs/adfrmctl.sh start
    script returned:
    You are running adfrmctl.sh version 115.37
    ORACLE error 376 in afpgdbcf
    Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
    ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
    ORA-06512: at "APPS.FND_CORE_LOG", line 22
    ORA-06512: at "APPS.FND_PROFILE", line 99
    ORA-06512: at "APPS.FND_WEB_CONFIG", line .
    The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
    Starting forms server for idev on port 9080.
    ORACLE error 376 in afpgdbcf
    Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
    ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
    ORA-06512: at "APPS.FND_CORE_LOG", line 22
    ORA-06512: at "APPS.FND_PROFILE", line 99
    ORA-06512: at "APPS.FND_WEB_CONFIG", line .
    The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
    adfrmctl.sh: exiting with status 0
    .end std out.
    .end err out.
    Executing service control script:
    /devc/p01/oracle/pixcomn/admin/scripts/idev_ebs/adrepctl.sh start
    script returned:
    You are running adrepctl.sh version 115.31
    ORACLE error 376 in afpgdbcf
    Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
    ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
    ORA-06512: at "APPS.FND_CORE_LOG", line 22
    ORA-06512: at "APPS.FND_PROFILE", line 99
    ORA-06512: at "APPS.FND_WEB_CONFIG", line .
    The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
    starting Reports Server for idev on port 7080.
    ORACLE error 376 in afpgdbcf
    Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
    ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
    ORA-06512: at "APPS.FND_CORE_LOG", line 22
    ORA-06512: at "APPS.FND_PROFILE", line 99
    ORA-06512: at "APPS.FND_WEB_CONFIG", line .
    The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
    adrepctl.sh: exiting with status 0
    .end std out.
    .end err out.
    Executing service control script:
    /devc/p01/oracle/pixcomn/admin/scripts/idev_ebs/adfmcctl.sh start
    script returned:
    You are running adfmcctl.sh version 115.19
    ORACLE error 376 in afpgdbcf
    Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
    ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
    ORA-06512: at "APPS.FND_CORE_LOG", line 22
    ORA-06512: at "APPS.FND_PROFILE", line 99
    ORA-06512: at "APPS.FND_WEB_CONFIG", line .
    The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
    Starting forms load balancing client for idev.
    ORACLE error 376 in afpgdbcf
    Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
    ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
    ORA-06512: at "APPS.FND_CORE_LOG", line 22
    ORA-06512: at "APPS.FND_PROFILE", line 99
    ORA-06512: at "APPS.FND_WEB_CONFIG", line .
    The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
    adfmcctl.sh: exiting with status 0
    .end std out.
    .end err out.
    Executing service control script:
    /devc/p01/oracle/pixcomn/admin/scripts/idev_ebs/adfmsctl.sh start
    script returned:
    You are running adfmsctl.sh version 115.15
    ORACLE error 376 in afpgdbcf
    Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
    ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
    ORA-06512: at "APPS.FND_CORE_LOG", line 22
    ORA-06512: at "APPS.FND_PROFILE", line 99
    ORA-06512: at "APPS.FND_WEB_CONFIG", line .
    The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
    starting forms metrics server for idev.
    ORACLE error 376 in afpgdbcf
    Cause: afpgdbcf failed due to ORA-00376: file 30 cannot be read at this time
    ORA-01110: data file 30: '/devc/p05/oracle/pixdata/tx_data4.dbf'
    ORA-06512: at "APPS.FND_CORE_LOG", line 22
    ORA-06512: at "APPS.FND_PROFILE", line 99
    ORA-06512: at "APPS.FND_WEB_CONFIG", line .
    The SQL statement being executed at the time of the error was: begin :d := FND_SECURITY_PKG.DATABASE_ID; end; and was executed from the file &ERRFILE.
    adfmsctl.sh: exiting with status 0
    .end std out.
    .end err out.
    Executing service control script:
    /devc/p01/oracle/pixcomn/admin/scripts/idev_ebs/jtffmctl.sh start
    script returned:
    You are running jtffmctl.sh version 115.16
    Validating Fulfillment patch level via /devc/p01/oracle/pixcomn/java
    Fulfillment patch level validated.
    Starting Fulfillment Server for idev on port 9380 ...
    jtffmctl.sh: exiting with status 0
    .end std out.
    .end err out.
    All enabled services for this node are started.
    Check logfile /devc/p01/oracle/pixcomn/admin/log/idev_ebs/06280212.log for details
    Exiting with status 0
    [appldev@ebs idev_ebs]$

    You are trying to access objects of that perticular datafiles.
    If you want to access either you need to perform recovery, you should have all the archives of all those when datafiles put offline.
    Or you should not try to access the objects such resides in that tablespace.
    If you perform offline or offline drop. Next time you can face problems like object does not exist.

  • HT4095 I've rented an SD movie from iTunes but cannot download it. Message reads "download error" followed by a small window with message "movie cannot be downloaded at this time. I have been billed by iTunes. What next?

    I've rented an SD movie from iTunes but cannot download it as I normally do to my iPad 2. Message reads "download error" followed by a small window with message "movie cannot be downloaded at this time". I have been billed by iTunes. What next?

    Hi, Kenny. 
    Thank you for visiting Apple Support Communities. 
    There are a couple things that I would recommend trying.  Try closing all open applications and power cycle the device.  Next, go through the section labeled Troubleshoot issues on an iPhone, iPad, or iPod touch in the second article below.  If the issue persists, try completely signing out of the iTunes Store on the iOS device and sign back in.  Be sure to test downloading an application after each step. 
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Cheers,
    Jason H. 

  • Contacts cannot be synced at this time because another computer is currentl

    Just got to say, mobile me is incredibly fragile. Apple should rename the service mobile beta.
    I have two problems,
    1) "Contacts cannot be synced at this time because another computer is currently syncing this data". I have two PCs and made some changes to the adress book. Now I get this error every fifteen minutes on my work PC. This is incredibly annoying. I am guessing that there is a dialog box displayed on my home PC warning that more than 5% of my data has changed and do I want to continue.
    Apple, please take this dialog box out of the Sync transaction operation otherwise it looks the entire process for all clients, if a user cannot access their PC at that moment to respond to the dialog.
    2) I created a new Address book Group on the server/cloud and populated it with several addresses. On my iPhone the group is shown but it is empty. Is this possibly related to the problem (1)?.
    Anybody have any suggestions? Is my idea about the cause correct?

    You could try again later but usually, that message means that the server detected a jailbroken device. Has your iPad been hacked or jailbroken? Or, has your computer been used with a hacked or jailbroken device?

  • It says "ipod cannot be restored at this time"???

    it says "ipod cannot be restored at this time"???

    If you have jailbroken your iPod before and used Tiny Umbrella then it could be that your hosts file has been modified and is not pointing to Apple's servers. In that case you have to fix your hosts file and everything should be ok. If you didn't jailbreak then try putting your iPod in dfu mode. Shut it off completely then hold both the power button and home button for 10 seconds then let go of the power button while still holding the home button. Then it should restore through iTunes. Hope this helps!

  • Whenever I try to download videos, it says it cannot be downloaded at this time.

    I click the little cloud with the blue arrow in it, then it starts going around the blue circle, like it's going to work. Then it says "cannot be downloaded at this time" I have tried a number of things. I have restarted and rebooted, typed "8.8.8.8" in the "DNS" space in the wifi, and reset the "network settings". I paid for this episode from iTunes and I'd like to watch it!!

    Honestly, these are WAGs but they're all that I can think of.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

Maybe you are looking for