Control transfer from switch activity to HumanWorkflow
Hi,
I have a HumanWorkflow (LoanTask), based on the outcomes (APPROVE, REJECT, MOREINFO) I have a switch activity branches.
From MOREINFO branch I want to transfer the control back to start of (LoanTask) human workflow.
Scenario:
Whenever an approver do an MOREINFO from HumanTask(LoanTask), the flow has to goto OWNER, once OWNER submits, the flow again comes back to approver.
LoanTask (HumanWorkflow)
- SWITCH Activity
- APPROVE ---> it goes to next approver
- REJECT ---> process terminates
- MOREINFO ---> it goes to OWNER once OWNER submits by entering some information, it again goes to the LoanTask (HumanWF).
How to acheive the MOREINFO.
Appreciate your guidance.
Hi,
that may varies from system to system, it depends on the requirement also...
and also the load running slowly depends on different factors like the volume of the load, records in it, no of daily loads running at that time,no of work processes in the system...etc....
rgds,
Similar Messages
-
How to stop history from switching active layer?
Hi all.
This thing has bugged the hell out of me for years and years, I've always just coped with it, but I would really love a fix. I also noticed this is a problem a lot of other people have too.
When ever I'm painting etc. I like to have a fair amount of layers. It's nice to have the characters on a different layer than the backgroud for instance. But then at some point, as I'm painting the character, I notice that a quick ⌥ ⌘ Z I pressed a while ago has tranferred me to the background layer.
Please don't just tell me to live with it. I have been trying to adjust to it for ages, and it's still easily the biggest problem I have ever had with Photoshop. I've tried to start painting on a new layer by drawing a small scribble and erasing it and what not, but then sometimes I forget. Sometimes it's ok, but sometimes this ends up ruining my whole layer hierarchy (I have to collapse the whole thing or separate the character from the background all over again, which kind of ruins layers in general for me). Can't I just have a "stop this irritating thing from happening-tick" in the preferences?
I mostly work on CS5 with a mac at work, but I have a PC and CS4 at home with the same problem. I love Photoshop, and I'm not a coder, but is it really so hard to stop history from screwing with what layer I'm on? I know this might seem like a rant, and I guess it kind of is, but please please PLEASE help me fix this! Also, sorry if this has been discussed before, I'm sure it has actually, but I couldn't find it with a quick search.It has come up before …
http://forums.adobe.com/search.jspa?resultTypes=DOCUMENT&resultTypes=MESSAGE&resultTypes=C OMMUNITY&resultTypes=TASK&resultTypes=PROJECT&resultTypes=SOCIAL_GROUP&resultTypes=COMMENT &peopleEnabled=true&q=undo+active+layer
I couldn’t locate the pertinent feature request at
http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop
so you might look some more there or just start an new one. -
Why does Spaces automatically switch away from my active window?
I'm having the weirdest problem. As of a few days ago, whenever I use an app in full screen mode, this thing happens: after about ten or twenty seconds, the app will switch away from my active window, and show the desktop. What's also weird about it is that there's no switch away from the app - in the menu bar (which was previously hidden, because I was in full screen mode), it'll show that whatever program I was using (ie, Chrome), not Finder. Again, to be clear: the window is switched out of view, and I can see my desktop, but the app I was using is still active.
This problem only happens in full screen mode, and seems to be happening across the board with all the apps I regularly use (iCal, Word, Chrome, Excel, to name a few).
Thanks for the help.This just started for me today and I have no idea what's causing it. I almost always have a full-screen Chrome space running and it worked fine for me for as long as I've had this machine, but suddenly for no reason it wants to do this autoswitch thing. It is incredibly frustrating even if it is a simple swipe to get the screen to go back across it makes watching a video or reading a page nigh impossible. Is there a solution for this at all or even a workaround?
-
Is it possible to use software limits on 7354 board when switching control modes from open to closed or closed to open loop?
Hello Richard,
When you say 'open loop' and 'closed loop', are you referring to running the application in position and torque mode? If not, how exactly are your controlling a servo motor in open loop?
In closed loop mode, the encoder values will be used as reference and the motion VIs can be used to configure the software limit as required. Are you currently losing the software limits? If so, how exactly are you losing these values? I am not sure I understood what exactly is happening with software limits in your program, so any more information on this would be useful.
Vivek Nath
National Instruments
Applications Engineer
Machine Vision -
Hello,
I have an Spanning tree problem when i conect 2 links from Switch DELL M6220 (there are blades to virtual machines too) to 2 links towards 2 switches CISCO 3750 connected with an stack (behavior like one switch for redundancy, with one IP of management)
In dell virtual machine is Spanning tree rapid stp, and in 3750 is Spanning tree mode pvst, cisco says that this is not important, only is longer time to create the tree.
I dont know but do you like this solutions i want to try on sunday?:
Could Spanning tree needs to work to send one native vlan to negociate the bdpus? switchport trunk native vlan 250
Is it better to put spanning-tree guard root in both 3750 in the ports to mitigate DELL to be root in Spanning Tree?
Is it better to put spanning- tree port-priority in the ports of Swicht Dell?
¿could you help me to control the root? ¿Do you think its better another solution? thanks!
CONFIG WITH PROBLEM
======================
3750: (the 2 ports are of 2 switches 3750s conected with a stack cable, in a show run you can see this)
interface GigabitEthernet2/0/28
description VIRTUAL SNMP2
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 4,13,88,250
switchport mode trunk
switchport nonegotiate
logging event trunk-status
shutdown
interface GigabitEthernet1/0/43
description VIRTUAL SNMP1
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 4,13,88,250
switchport mode trunk
switchport nonegotiate
shutdown
DELL M6220: (its only one swith)
interface Gi3/0/19
switchport mode trunk
switchport trunk allowed vlan 4,13,88,250
exit
interface Gi4/0/19
switchport mode trunk
switchport trunk allowed vlan 4,13,88,250
exitF.Y.I for catylyst heroes - here is the equivalent config for SG-300 - Vlan1 is required on the allowed list on the catylyst side (3xxx/4xxx/6xxx)
In this example:
VLANS - Voice on 188, data on 57, management on 56.
conf t
hostname XXX-VOICE-SWXX
no passwords complexity enable
username xxxx priv 15 password XXXXX
enable password xxxxxx
ip ssh server
ip telnet server
crypto key generate rsa
macro auto disabled
voice vlan state auto-enabled !(otherwise one switch controls your voice vlan….)
vlan 56,57,188
voice vlan id 188
int vlan 56
ip address 10.230.56.12 255.255.255.0
int vlan1
no ip add dhcp
ip default-gateway 10.230.56.1
interface range GE1 - 2
switchport mode trunk
channel-group 1 mode auto
int range fa1 - 24
switchport mode trunk
switchport trunk allowed vlan add 188
switchport trunk native vlan 57
qos advanced
qos advanced ports-trusted
exit
int Po1
switchport trunk allowed vlan add 56,57,188
switchport trunk native vlan 1
do sh interfaces switchport po1
!CATYLYST SIDE
!Must Explicitly allow VLan1, this is not normal for catalysts - or spanning tree will not work ! Even though it’s the native vlan on both sides.
interface Port-channel1
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,56,57,189
switchport mode trunk -
Data transfer from sap r/3 into excel sheet for mi01
hi gurus,
as i am a xi consultant i got requirement to write a program for data transfer from sap r/3 into excel sheet for MI01.can any body help me by giving sample code or example for this requirement.please help me.Hi Rohit,
This is an upload program and it has used both function modules to upload from an excel to R3 and to download from R3 onto excel.
GUI_UPLOAD
GUI_DOWNLOAD
are the function modules used.
Hope this helps,
*Output: Downloads error records onto presentation server,
* Displays report with number of success and error records
REPORT ZMCG047CONTR NO STANDARD PAGE HEADING
LINE-SIZE 255
MESSAGE-ID ZM.
*& Table declarations
TABLES : T001W, "Plants/Branches
T024E, "Purchasing Organizations
T001. "Company Codes
* TYPE-POOLS DECLARATION
TYPE-POOLS : SLIS.
* Types Declaration *
TYPES: BEGIN OF T_RECORD, "record storing contract info
LIFNR(010), "Vendor Number
EVART(004), "Agreement Type
EKORG(004), "Purchasing Organization
EKGRP(003), "Purchasing Group
WERKS(004), "Plant
LGORT(004), "Storage Location
KDATB(010), "Valid start Date
KDATE(010), "Valid End Date
ZTERM(004), "Payment Terms
KTWRT(020), "Target Value
EPSTP(001), "Item Category
EMATN(018), "Material Number
KTMNG(017), "Target Quantity
NETPR(014), "Net Price
PEINH(006), "Net Price Unit
BPRME(003), "Net Price Order Price Unit
IDNLF(035), "Vendor Material number
WEBRE(001), "GR Based-IV
MEPRF(001), "Pricing Date Category
LTEX1(040), "Info Text
DATAB(010), "Valid From
DATBI(010), "Valid To
KSCHL(004), "Condition Type
KBETR(016), "Condition Rate if scale is not given
KONWA(005), "Currency
KPEIN(005), "Condition Pricing Unit
KMEIN(003), "Condition Unit of Measure
KSTBM(019), "Scale
KBETR_01(016), "Scale Rate
DEL_FLAG, "Delete Flag Indicator
ERR_MSG(100), "Error Message
END OF T_RECORD,
BEGIN OF T_ERR_RECORD, "to have error records stored
LIFNR(010), "Vendor Number
EVART(004), "Agreement Type
EKORG(004), "Purchasing Organization
EKGRP(003), "Purchasing Group
WERKS(004), "Plant
LGORT(004), "Storage Location
KDATB(010), "Valid start Date
KDATE(010), "Valid End Date
ZTERM(004), "Payment Terms
KTWRT(020), "Target Value
EPSTP(001), "Item Category
EMATN(018), "Material Number
KTMNG(017), "Target Quantity
NETPR(014), "Net Price
PEINH(006), "Net Price Unit
BPRME(003), "Net Price Order Price Unit
IDNLF(035), "Vendor Material number
WEBRE(001), "GR Based-IV
MEPRF(001), "Pricing Date Category
LTEX1(040), "Info Text
DATAB(010), "Valid From
DATBI(010), "Valid To
KSCHL(004), "Condition Type
KBETR(016), "Condition Rate if scale is not given
KONWA(005), "Currency
KPEIN(005), "Condition Pricing Unit
KMEIN(003), "Condition Unit of Measure
KSTBM(019), "Scale
KBETR_01(016), "Scale Rate
DEL_FLAG, "Delete Flag Indicator
ERR_MSG(100), "Error Message
END OF T_ERR_RECORD,
BEGIN OF T_LOEKZ, "To have deletion indicators for materials
LOEKZ(001), "Deletion indicator in purchasing document
EMATN(018), "Material Number
WERKS(004), "Plant
LGORT(004), "Storage Location
BSTYP(001), "Purchasing document category
END OF T_LOEKZ,
BEGIN OF T_MATNR, " Type definition to store details of materials
MATNR(018), "Material Number
END OF T_MATNR,
BEGIN OF T_T001, " Type definition for company codes
BUKRS(004), " Company Code
END OF T_T001,
BEGIN OF T_ZMVXREF, "Cross-Reference table type
D_ALTKN(10), "Legacy Vendor Number
D_BUKRS(4), "Legacy Company Code
M_ALTKN(10), "SAP Company Code
END OF T_ZMVXREF,
BEGIN OF T_LFA1, "Master data of vendors
LIFNR(10), "Vendor Number
END OF T_LFA1,
* Type Declaration for T024E (Company Codes)
BEGIN OF T_T024E,
EKORG LIKE T024E-EKORG, "Purchasing organization
BUKRS LIKE T024E-BUKRS, "Company Code
END OF T_T024E,
* Type Declaration for t001w (Plant)
BEGIN OF T_T001W,
WERKS LIKE T001W-WERKS, "Plant
END OF T_T001W,
* Type Declatation for String Line
BEGIN OF T_STR1, "#EC NEEDED
SLINE(6000) TYPE C,
END OF T_STR1.
TYPES: BEGIN OF T_BDCDATA. "BDC Data
INCLUDE STRUCTURE BDCDATA.
TYPES: END OF T_BDCDATA.
* Internal Tables Declaration *
DATA:
* Internal table to store input file data
I_RECORD TYPE STANDARD TABLE OF T_RECORD INITIAL SIZE 0,
* Internal table to capture errors
I_ERR_REC TYPE STANDARD TABLE OF T_ERR_RECORD INITIAL SIZE 0,
* Internal table to check for deletion indicators
I_LOEKZ TYPE STANDARD TABLE OF T_LOEKZ INITIAL SIZE 0,
* Internal table to check for material numbers
I_MATNR TYPE STANDARD TABLE OF T_MATNR INITIAL SIZE 0,
* Internal table used for storing Cross-Reference data of Vendor
I_ZMVXREF TYPE STANDARD TABLE OF T_ZMVXREF INITIAL SIZE 0,
* Internal table for holding Vendor Numbers from Master table
I_LFA1 TYPE STANDARD TABLE OF T_LFA1 INITIAL SIZE 0,
* Internal table for holding Purchase Org and Company Codes
I_T024E TYPE STANDARD TABLE OF T_T024E INITIAL SIZE 0,
* Internal table for holding Plants
I_T001W TYPE STANDARD TABLE OF T_T001W INITIAL SIZE 0,
* Internal table for storing a list of Company Codes
I_T001 TYPE STANDARD TABLE OF T_T001 INITIAL SIZE 0,
* Internal table used for ALV Reporting
I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
* Internal table used for holding List Header
I_LISTHEADER TYPE SLIS_T_LISTHEADER, "EC NEEDED
* Internal table to hold ALV Event
I_ALV_EVENT TYPE SLIS_T_EVENT,
* Internal table to hold Sort Info for ALV Report
I_SORT TYPE SLIS_T_SORTINFO_ALV,
* Internal table for BDC Data
I_BDCDATA TYPE STANDARD TABLE OF T_BDCDATA INITIAL SIZE 0,
* Internal table for messages
I_MESSTAB TYPE TABLE OF BDCMSGCOLL,
* Internal table for String line
I_STR1 TYPE STANDARD TABLE OF T_STR1 INITIAL SIZE 0.
* Work Area Declaration *
DATA:
* Work Area to hold data for the Open Contract
WA_RECORD TYPE T_RECORD,
* Work Area to hold previous record data
WA_RECORDPREV TYPE T_RECORD,
* Work Area to hold errors
WA_ERR_REC TYPE T_ERR_RECORD,
* Work Area to hold the Deletion Indicator of materials
WA_LOEKZ TYPE T_LOEKZ,
* Work Area to hold Material numbers of required materials
WA_MATNR TYPE T_MATNR, "EC NEEDED
* Work Area to hold errors occured while performing BDC
WA_MESSTAB TYPE BDCMSGCOLL,
* Work Area to hold field catalog for ALV Reports
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
* Work Area to hold list header data for ALV reports
WA_LISTHEADER TYPE SLIS_LISTHEADER,
* Work Area to hold ALV Event
WA_ALV_EVENT LIKE LINE OF I_ALV_EVENT, "EC NEEDED
* Work Area to hold Layout of ALV Report
WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
* Work Area to hold Cross-Reference data of Vendor
WA_ZMVXREF TYPE T_ZMVXREF,
* Work Area to hold Vendor Numbers from Master table
WA_LFA1 TYPE T_LFA1, "EC NEEDED
* Work Area to hold Purchase Org and Company Codes
WA_T024E TYPE T_T024E,
* Work Area to hold Company Codes
WA_T001 TYPE T_T001,
* Work Area to hold Plants
WA_T001W TYPE T_T001W,
* Work Area to hold Sort Info for ALV Report
WA_SORT TYPE SLIS_SORTINFO_ALV,
* Work Area to hold BDC Data
WA_BDCDATA TYPE T_BDCDATA,
* Work Area for String line
WA_STR1 TYPE T_STR1.
* Variables Declaration *
DATA: V_ERRMSG(500), "To temporarily store the error message
V_CONV_DATE(10) TYPE C, "To capture the converted date format
V_DATE LIKE SY-DATUM,
V_REPID LIKE SY-REPID, "holds report id
V_CROSS_REFERENCE_ERROR TYPE I, " cross-reference error
V_INPUTERROR_FLAG VALUE '', " input error status
V_FILENAME TYPE STRING, " File Name
VEN_FLAG(1), " at new status
MAT_FLAG(1), " at new status
V_IND(2) TYPE N, " index of table control
V_IND2(2) TYPE N, " index of table control
V_IND3(2) TYPE N, " index of table control
V_EVRTP1(20),
V_EPSTP1(20),
V_EMATN1(20),
V_KTMNG1(20),
V_NETPR1(20),
V_PEINH1(20),
V_BPRME1(20),
V_TCSELFLAG1(20),
V_KSCHL2(20),
V_KBETR2(20),
V_KONWA2(20),
V_KPEIN2(20),
V_KMEIN2(20),
V_SELKZ2(20),
V_KBETR3(20),
V_KSTBM3(20),
V_LINE TYPE I,
V_STR TYPE X VALUE '09',
V_EXIST TYPE C,
V_EXIST1 TYPE C,
V_ISDIR TYPE C,
V_ISDIR1 TYPE C.
* Constants Declaration *
CONSTANTS: C_TCODE(5) VALUE 'ME31K', "Trx code - Open Contract Creation
C_TRUE VALUE 'X', " Del_Flag indicator
C_LOEKZ_MARKED VALUE 'X', "Deletion indicator for material
C_INPUTERROR_FLAG_YES VALUE 'X', "Input File Indicator
C_VEN_ERR1 VALUE 1, "Error Indicator
C_16(2) VALUE '16',
C_VEN_ERR2 VALUE 2, "Error Indicator
C_VEN_ERR3 VALUE 3, "Error Indicator
C_VEN_SUCS VALUE 0, "Success Indicator
C_SUCCESS LIKE SY-SUBRC VALUE '0',
C_STRUE VALUE 'S', "Del_flag for SAP Errors
C_YTRUE VALUE 'Y', "Del_flag for Success Records
C_MSGTYP_E VALUE 'E', "holds error message type
C_MSGTYP_S VALUE 'S', "holds success message type
C_BSTYP VALUE 'K', "Purchasing Document type is Contract
C_BACKGROUND VALUE 'N', "Background mode
C_FOREGROUND VALUE 'A', "All Screen mode
C_ERRORS VALUE 'E', "Error screen mode
C_WK(2) VALUE 'WK'. "Value Contract
* Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-033.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
* Plant
S_WERKS FOR T001W-WERKS OBLIGATORY,
* Purchase Organization
S_EKORG FOR T024E-EKORG OBLIGATORY.
* Company Code
PARAMETER P_BUKRS LIKE T001-BUKRS OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 3.
PARAMETER RB_SERVE RADIOBUTTON GROUP RBX DEFAULT 'X' USER-COMMAND U1.
SELECTION-SCREEN COMMENT 6(19) TEXT-036.
SELECTION-SCREEN POSITION 37.
PARAMETER RB_LOCAL RADIOBUTTON GROUP RBX.
SELECTION-SCREEN COMMENT 40(13) TEXT-035.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
PARAMETERS:
* Parameter holding Input File name
P_FILE LIKE RLGRAP-FILENAME
OBLIGATORY
LOWER CASE
DEFAULT 'C:\'
MODIF ID G1,
P_FILE1 LIKE RLGRAP-FILENAME
OBLIGATORY
LOWER CASE
DEFAULT '/celestica/interface/corp/in/work/'
MODIF ID G2,
* Parameter specifying Mode of calling the Transaction.
P_MODE DEFAULT 'N' OBLIGATORY,
* Check box used to test the input file.
P_TEST AS CHECKBOX DEFAULT 'X',
* Parameter holding Filename for holding Input File Errors
P_IPERR LIKE RLGRAP-FILENAME
OBLIGATORY
LOWER CASE
DEFAULT 'C:\'
MODIF ID G1,
P_IPERR1 LIKE RLGRAP-FILENAME
OBLIGATORY
LOWER CASE
DEFAULT '/celestica/interface/corp/in/work/047_Err.txt'
MODIF ID G2.
SELECTION-SCREEN END OF BLOCK B2.
* AT Selection Screen Events *
* Loop the screen to activate relative paths
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF RB_SERVE = C_TRUE AND SCREEN-GROUP1 = 'G1'.
SCREEN-OUTPUT = 0.
SCREEN-ACTIVE = 0.
SCREEN-INPUT = 0.
ELSEIF RB_LOCAL = C_TRUE AND SCREEN-GROUP1 = 'G2'.
SCREEN-OUTPUT = 0.
SCREEN-ACTIVE = 0.
SCREEN-INPUT = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
AT SELECTION-SCREEN ON BLOCK B2.
* Checking Access Authorization for the user
CALL FUNCTION 'ZU_DATA_ACCESS_AUTH_CHECK'
EXPORTING
ACTVT = C_16
P_BUKRS = P_BUKRS
TABLES
S_WERKS = S_WERKS
S_EKORG = S_EKORG
EXCEPTIONS
BUKRS_FAILED = 1
VKORG_FAILED = 2
VTWEG_FAILED = 3
EKORG_FAILED = 4
WERKS_FAILED = 5
LGNUM_FAILED = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
AT SELECTION-SCREEN ON P_BUKRS.
IF NOT P_BUKRS IS INITIAL.
SELECT SINGLE BUKRS INTO T001
FROM T001
WHERE BUKRS EQ P_BUKRS.
IF SY-SUBRC NE 0.
MESSAGE I000 WITH TEXT-089.
STOP.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
* Search Help to select Input File path.
PERFORM GET_FILE_NAME USING P_FILE.
* Check for the existence of the file.
IF RB_LOCAL EQ C_TRUE.
CALL FUNCTION 'TMP_GUI_GET_FILE_EXIST'
EXPORTING
FNAME = P_FILE
IMPORTING
EXIST = V_EXIST
ISDIR = V_ISDIR
EXCEPTIONS
FILEINFO_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF V_ISDIR IS INITIAL.
IF V_EXIST IS INITIAL.
MESSAGE I000 WITH TEXT-018.
STOP.
ENDIF.
ELSEIF V_ISDIR EQ C_TRUE.
MESSAGE I000 WITH TEXT-068.
STOP.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_IPERR.
* Search Help to select Input Error File path.
PERFORM GET_FILE_NAME USING P_IPERR.
AT SELECTION-SCREEN.
* Validate Transaction Mode
IF P_MODE <> C_BACKGROUND AND
P_MODE <> C_FOREGROUND AND
P_MODE <> C_ERRORS.
MESSAGE I000 WITH TEXT-034.
STOP.
ENDIF.
START-OF-SELECTION.
* Get the Input File Data
V_FILENAME = P_FILE.
PERFORM UPLOAD_FLATFILE_DATA TABLES I_RECORD
USING V_FILENAME.
* Sorting the data by all fields
SORT I_RECORD.
* Ensuring the padding of the empty spaces before the vendor No
CLEAR WA_RECORD.
LOOP AT I_RECORD INTO WA_RECORD.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_RECORD-LIFNR
IMPORTING
OUTPUT = WA_RECORD-LIFNR.
MODIFY I_RECORD FROM WA_RECORD
INDEX SY-TABIX
TRANSPORTING LIFNR.
CLEAR WA_RECORD.
ENDLOOP.
* Input file validation
PERFORM VALIDATE_FLATFILE_DATA.
IF P_TEST = C_TRUE.
IF I_ERR_REC[] IS INITIAL.
MESSAGE I000 WITH TEXT-032.
STOP.
ELSE.
* Display all the error records at the input level.
PERFORM DISPLAY_INPERR_RECORDS.
* Download Error File
PERFORM DOWNLOAD_ERROR_FILE.
ENDIF.
ELSE.
* Build BDC Data
PERFORM BUILD_BDC_DATA.
* Download Error File
PERFORM DOWNLOAD_ERROR_FILE.
* Display the status report.
PERFORM DISPLAY_PROCESSED_RECORDS.
ENDIF.
END-OF-SELECTION.
REFRESH: I_RECORD,
I_ERR_REC,
I_LOEKZ,
I_MATNR,
I_ZMVXREF,
I_LFA1,
I_T024E,
I_FIELDCAT,
I_LISTHEADER,
I_ALV_EVENT,
I_SORT,
I_BDCDATA,
I_MESSTAB,
I_STR1.
FREE: I_RECORD,
I_ERR_REC,
I_LOEKZ,
I_MATNR,
I_ZMVXREF,
I_LFA1,
I_T024E,
I_FIELDCAT,
I_LISTHEADER,
I_ALV_EVENT,
I_SORT,
I_BDCDATA,
I_MESSTAB,
I_STR1.
*& Form GET_file_name
* Fetches the file and path from the presentation system
* --> p1 Path along with the file name
FORM GET_FILE_NAME USING L_FILE LIKE RLGRAP-FILENAME.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
MASK = ',*.TXT,*.txt.'
MODE = 'O'
TITLE = TEXT-011
IMPORTING
FILENAME = L_FILE
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5.
CASE SY-SUBRC.
WHEN 1.
MESSAGE I000 WITH TEXT-084.
STOP.
WHEN 2.
MESSAGE I000 WITH TEXT-085.
STOP.
WHEN 3.
MESSAGE I000 WITH TEXT-086.
STOP.
WHEN 4.
MESSAGE I000 WITH TEXT-087.
STOP.
ENDCASE.
ENDFORM. " GET_file_name
*& Form upload_flatfile_data
* Uploading data from Flat File
FORM UPLOAD_FLATFILE_DATA
TABLES I_L_RECORD STRUCTURE WA_RECORD
USING L_FILENAME TYPE STRING.
DATA WA_L_RECORD TYPE T_RECORD.
* Upload the Flat file data
IF RB_LOCAL EQ C_TRUE. "File is on the Local System
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = L_FILENAME
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = I_L_RECORD
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
CASE SY-SUBRC.
WHEN 0.
DESCRIBE TABLE I_L_RECORD LINES V_LINE.
IF V_LINE EQ 0.
MESSAGE I000 WITH TEXT-065.
STOP.
ENDIF.
WHEN 1.
MESSAGE I000 WITH TEXT-068.
STOP.
WHEN 2.
MESSAGE I000 WITH TEXT-069.
STOP.
WHEN 3.
MESSAGE I000 WITH TEXT-070.
STOP.
WHEN 4.
MESSAGE I000 WITH TEXT-071.
STOP.
WHEN 5.
MESSAGE I000 WITH TEXT-072.
STOP.
WHEN 6.
MESSAGE I000 WITH TEXT-073.
STOP.
WHEN 7.
MESSAGE I000 WITH TEXT-074.
STOP.
WHEN 8.
MESSAGE I000 WITH TEXT-075.
STOP.
WHEN 9.
MESSAGE I000 WITH TEXT-076.
STOP.
WHEN 10.
MESSAGE I000 WITH TEXT-077.
STOP.
WHEN 11.
MESSAGE I000 WITH TEXT-078.
STOP.
WHEN 12.
MESSAGE I000 WITH TEXT-079.
STOP.
WHEN 13.
MESSAGE I000 WITH TEXT-080.
STOP.
WHEN 14.
MESSAGE I000 WITH TEXT-081.
STOP.
WHEN 15.
MESSAGE I000 WITH TEXT-082.
STOP.
WHEN 16.
MESSAGE I000 WITH TEXT-083.
STOP.
ENDCASE.
CLEAR V_LINE.
ELSEIF RB_SERVE EQ C_TRUE. "File is on the Application Server
P_MODE = C_BACKGROUND.
OPEN DATASET P_FILE1 FOR INPUT IN TEXT MODE.
CHECK SY-SUBRC EQ C_SUCCESS.
CLEAR WA_STR1.
DO.
READ DATASET P_FILE1 INTO WA_STR1.
IF SY-SUBRC <> 0. " NE SUCCESS.
EXIT.
ELSEIF SY-SUBRC EQ C_SUCCESS.
APPEND WA_STR1 TO I_STR1.
CLEAR WA_STR1.
ENDIF. " ENDIF on SY-SUBRC 0 Check.
ENDDO. " ENDDO
DELETE I_STR1 WHERE SLINE EQ ' '.
DESCRIBE TABLE I_STR1 LINES V_LINE.
IF V_LINE EQ 0.
MESSAGE S000 WITH TEXT-065.
STOP.
ENDIF.
LOOP AT I_STR1 INTO WA_STR1.
CLEAR: WA_L_RECORD.
SPLIT WA_STR1-SLINE AT V_STR
INTO WA_L_RECORD-LIFNR
WA_L_RECORD-EVART
WA_L_RECORD-EKORG
WA_L_RECORD-EKGRP
WA_L_RECORD-WERKS
WA_L_RECORD-LGORT
WA_L_RECORD-KDATB
WA_L_RECORD-KDATE
WA_L_RECORD-ZTERM
WA_L_RECORD-KTWRT
WA_L_RECORD-EPSTP
WA_L_RECORD-EMATN
WA_L_RECORD-KTMNG
WA_L_RECORD-NETPR
WA_L_RECORD-PEINH
WA_L_RECORD-BPRME
WA_L_RECORD-IDNLF
WA_L_RECORD-WEBRE
WA_L_RECORD-MEPRF
WA_L_RECORD-LTEX1
WA_L_RECORD-DATAB
WA_L_RECORD-DATBI
WA_L_RECORD-KSCHL
WA_L_RECORD-KBETR
WA_L_RECORD-KONWA
WA_L_RECORD-KPEIN
WA_L_RECORD-KMEIN
WA_L_RECORD-KSTBM
WA_L_RECORD-KBETR_01
WA_L_RECORD-DEL_FLAG
WA_L_RECORD-ERR_MSG.
APPEND WA_L_RECORD TO I_L_RECORD.
CLEAR: WA_L_RECORD,
WA_STR1.
ENDLOOP.
REFRESH I_STR1.
CLOSE DATASET P_FILE1.
ENDIF.
ENDFORM.
*& Form BDC_DYNPRO
* Data populated into i_bdcdata table for program
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR WA_BDCDATA.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO = DYNPRO.
WA_BDCDATA-DYNBEGIN = C_TRUE.
APPEND WA_BDCDATA TO I_BDCDATA.
ENDFORM.
*& Form BDC_FIELD
* Data populated into i_bdcdata table for fields
FORM BDC_FIELD USING FNAM FVAL.
CLEAR WA_BDCDATA.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO I_BDCDATA.
ENDFORM.
*& Form convert_date
* Converting the data from the file format to mm/dd/yyyy format
* <--P_wa_record_kdatb Source Date
* <--p_l_conv_date Target Date
FORM CONVERT_DATE USING L_DATE
L_TAR_DATE.
CONCATENATE L_DATE+0(2)
L_DATE+3(2)
L_DATE+6(4)
INTO L_TAR_DATE.
ENDFORM. " convert_date
*& Form validate_flatfile_data
* Validating the input file
FORM VALIDATE_FLATFILE_DATA.
DATA: L_TODAY LIKE SY-DATUM,
L_STARTDATE_C LIKE SY-DATUM,
L_ENDDATE_C LIKE SY-DATUM,
L_ENDDATE_C1 LIKE SY-DATUM,
L_STARTDATE_C1 LIKE SY-DATUM,
L_STARTDATE(8),
L_ENDDATE(8).
* Fetch indicator for all records on the material, plant & storage
* location combination.
IF NOT I_RECORD[] IS INITIAL.
REFRESH I_LOEKZ.
SELECT EMATN " Material Number
WERKS " Plant
LGORT " Storage Location
BSTYP " Purchasing Document Category
LOEKZ " Deletion indicator
INTO TABLE I_LOEKZ
FROM EKPO
FOR ALL ENTRIES IN I_RECORD
WHERE EMATN = I_RECORD-EMATN
AND WERKS = I_RECORD-WERKS
AND LGORT = I_RECORD-LGORT
AND BSTYP = C_BSTYP
AND LOEKZ = C_LOEKZ_MARKED.
IF SY-SUBRC EQ 0.
SORT I_LOEKZ BY EMATN WERKS LGORT BSTYP LOEKZ.
ENDIF.
* Fetching Plants for all entries in the selection screen
REFRESH I_T001W.
SELECT WERKS "Plant
INTO TABLE I_T001W
FROM T001W
WHERE WERKS IN S_WERKS.
IF SY-SUBRC EQ 0.
SORT I_T001W BY WERKS.
ENDIF.
* Fetching materials for the plants listed in flat file
REFRESH I_MATNR.
SELECT MATNR " Material Number
INTO TABLE I_MATNR
FROM MARC
FOR ALL ENTRIES IN I_RECORD
WHERE WERKS = I_RECORD-WERKS.
IF SY-SUBRC EQ 0.
SORT I_MATNR BY MATNR.
ENDIF.
* Fetching Company Codes for repective Purchase Organizations
REFRESH I_T024E.
SELECT EKORG " Purchase Organization
BUKRS " Company Code
INTO TABLE I_T024E
FROM T024E
WHERE EKORG IN S_EKORG.
IF SY-SUBRC EQ 0.
SORT I_T024E BY EKORG.
ENDIF.
* Fetching SAP Data using Legacy Data.
REFRESH I_ZMVXREF.
SELECT D_ALTKN
D_BUKRS
M_ALTKN
INTO TABLE I_ZMVXREF
FROM ZMVXREF
FOR ALL ENTRIES IN I_RECORD
WHERE D_ALTKN = I_RECORD-LIFNR.
IF SY-SUBRC EQ 0.
SORT I_ZMVXREF BY D_ALTKN D_BUKRS.
ENDIF.
* Fetching Vendors from LFA1
IF NOT I_ZMVXREF[] IS INITIAL.
REFRESH I_LFA1.
SELECT LIFNR
INTO TABLE I_LFA1
FROM LFA1
FOR ALL ENTRIES IN I_ZMVXREF
WHERE LIFNR = I_ZMVXREF-M_ALTKN.
IF SY-SUBRC EQ 0.
SORT I_LFA1 BY LIFNR.
ENDIF.
ENDIF.
* Start Validating the flat file
CLEAR: WA_RECORD,
WA_T024E,
WA_ZMVXREF,
WA_LFA1,
WA_LOEKZ,
WA_MATNR.
LOOP AT I_RECORD INTO WA_RECORD.
L_TODAY = SY-DATUM.
L_STARTDATE = WA_RECORD-KDATB.
L_ENDDATE = WA_RECORD-KDATE.
IF WA_RECORD-DEL_FLAG IS INITIAL.
READ TABLE I_T001W INTO WA_T001W
WITH KEY WERKS = WA_RECORD-WERKS
BINARY SEARCH.
IF SY-SUBRC EQ 0.
* Cross-Reference check performed for the given Vendors
READ TABLE I_T024E INTO WA_T024E
WITH KEY EKORG = WA_RECORD-EKORG
BINARY SEARCH.
IF SY-SUBRC NE 0.
V_CROSS_REFERENCE_ERROR = C_VEN_ERR3.
ELSE.
READ TABLE I_ZMVXREF INTO WA_ZMVXREF
WITH KEY D_ALTKN = WA_RECORD-LIFNR
D_BUKRS = P_BUKRS
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE I_LFA1 INTO WA_LFA1
WITH KEY LIFNR = WA_ZMVXREF-M_ALTKN
BINARY SEARCH.
IF SY-SUBRC EQ 0.
V_CROSS_REFERENCE_ERROR = C_VEN_SUCS.
ELSE.
V_CROSS_REFERENCE_ERROR = C_VEN_ERR2.
ENDIF.
ELSE.
V_CROSS_REFERENCE_ERROR = C_VEN_ERR1.
ENDIF.
ENDIF.
* Legacy Vendor could not be mapped
IF V_CROSS_REFERENCE_ERROR EQ C_VEN_ERR1.
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES. "Inp.file err. occurd
WA_RECORD-DEL_FLAG = C_TRUE.
WA_RECORD-ERR_MSG = TEXT-007.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR.
* Legacy Vendor is mapped but the obtained SAP vendor doesn't exist.
ELSEIF V_CROSS_REFERENCE_ERROR EQ C_VEN_ERR2.
* Inp.file err. occurd
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-DEL_FLAG = C_TRUE.
WA_RECORD-ERR_MSG = TEXT-008.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR.
* Purchase Organization doesn't exist in T024E.
ELSEIF V_CROSS_REFERENCE_ERROR EQ C_VEN_ERR3.
* Inp.file err. occurd
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-DEL_FLAG = C_TRUE.
WA_RECORD-ERR_MSG = TEXT-014.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE EKORG = WA_RECORD-EKORG.
* Vendor is mapped and validated successfully
ELSEIF V_CROSS_REFERENCE_ERROR EQ C_VEN_SUCS.
* Checking for the deletion indicator for that record
CONCATENATE WA_RECORD-KDATB+6(4)
WA_RECORD-KDATB+3(2)
WA_RECORD-KDATB+0(2)
INTO
L_STARTDATE.
MOVE L_STARTDATE TO L_STARTDATE_C.
CONCATENATE WA_RECORD-KDATB+6(4)
WA_RECORD-KDATB+0(2)
WA_RECORD-KDATB+3(2)
INTO
L_STARTDATE_C1.
CONCATENATE WA_RECORD-KDATE+6(4)
WA_RECORD-KDATE+3(2)
WA_RECORD-KDATE+0(2)
INTO
L_ENDDATE.
MOVE L_ENDDATE TO L_ENDDATE_C.
CONCATENATE WA_RECORD-KDATE+6(4)
WA_RECORD-KDATE+0(2)
WA_RECORD-KDATE+3(2)
INTO
L_ENDDATE_C1.
READ TABLE I_LOEKZ INTO WA_LOEKZ WITH KEY
EMATN = WA_RECORD-EMATN
WERKS = WA_RECORD-WERKS
LGORT = WA_RECORD-LGORT
BINARY SEARCH.
IF SY-SUBRC EQ 0.
* Inpfle err.occured
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-003.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE
AND ZTERM = WA_RECORD-ZTERM
AND KTWRT = WA_RECORD-KTWRT
AND EPSTP = WA_RECORD-EPSTP
AND EMATN = WA_RECORD-EMATN.
* Validating the Purchasing Organization for Blank/Null
ELSEIF WA_RECORD-EKORG IS INITIAL.
* Inpfle err.occured
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-010.
WA_RECORD-DEL_FLAG = C_TRUE.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE
AND ZTERM = WA_RECORD-ZTERM
AND KTWRT = WA_RECORD-KTWRT
AND EPSTP = WA_RECORD-EPSTP
AND EMATN = WA_RECORD-EMATN.
* Validating the Plant for Blank/Null
ELSEIF WA_RECORD-WERKS IS INITIAL.
* Inpfle err.occured
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-039.
WA_RECORD-DEL_FLAG = C_TRUE.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE
AND ZTERM = WA_RECORD-ZTERM
AND KTWRT = WA_RECORD-KTWRT
AND EPSTP = WA_RECORD-EPSTP
AND EMATN = WA_RECORD-EMATN.
* Validating the Contract Validity Start Date
ELSEIF L_STARTDATE_C1 GT L_TODAY. "#EC PORTABLE
* Inpfle err.occured
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-004.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB.
* Validating the Contract Validity End Date
ELSEIF L_ENDDATE_C1 LE L_TODAY. "#EC PORTABLE
* Inpfle err.ocrd
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-005.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE.
* Checking for Material under the Plant for Agreement Type 'WK'
ELSEIF WA_RECORD-EVART = C_WK.
READ TABLE I_MATNR INTO WA_MATNR
WITH KEY MATNR = WA_RECORD-EMATN
BINARY SEARCH.
IF SY-SUBRC NE 0.
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES. "Inpfle err.ocrd
WA_RECORD-ERR_MSG = TEXT-006.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE
AND ZTERM = WA_RECORD-ZTERM
AND KTWRT = WA_RECORD-KTWRT
AND EPSTP = WA_RECORD-EPSTP
AND EMATN = WA_RECORD-EMATN.
ENDIF.
ENDIF. " checking of deletion indicator
ENDIF. " checking for success of vendor cross reference
ELSE.
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES. "Inpfle err.ocrd
WA_RECORD-ERR_MSG = TEXT-041.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE WERKS = WA_RECORD-WERKS.
ENDIF. " Plant checked to selection screen
ENDIF. " the records for which del_flag is initial
CLEAR: WA_RECORD,
WA_T024E,
WA_ZMVXREF,
WA_LFA1,
WA_LOEKZ,
WA_MATNR,
L_TODAY,
L_STARTDATE_C,
L_ENDDATE_C,
L_STARTDATE,
L_ENDDATE.
ENDLOOP.
LOOP AT I_RECORD INTO WA_RECORD.
IF WA_RECORD-DEL_FLAG = C_TRUE.
APPEND WA_RECORD TO I_ERR_REC.
CLEAR WA_RECORD.
ENDIF.
ENDLOOP.
ELSE.
MESSAGE E000 WITH TEXT-013. " no records in the flat file
STOP.
ENDIF.
ENDFORM. " validate_flatfile_data
*& Form DOWNLOAD_ERROR_FILE
* Downloads all records along with the records encountering the
* input file validation error
FORM DOWNLOAD_ERROR_FILE.
DATA L_ISDIR TYPE C.
IF V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
V_FILENAME = P_IPERR.
* Check for the existence of the file.
IF RB_LOCAL EQ C_TRUE.
CALL FUNCTION 'TMP_GUI_GET_FILE_EXIST'
EXPORTING
FNAME = P_IPERR
IMPORTING
ISDIR = L_ISDIR
EXCEPTIONS
FILEINFO_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF L_ISDIR EQ C_TRUE.
MESSAGE I000 WITH TEXT-088.
STOP.
ENDIF.
ENDIF.
IF RB_LOCAL EQ C_TRUE.
* Download the Input Error File.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = V_FILENAME
FILETYPE = 'ASC'
WRITE_FIELD_SEPARATOR = '#'
TABLES
DATA_TAB = I_ERR_REC
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSEIF RB_SERVE EQ C_TRUE.
OPEN DATASET P_IPERR1 FOR OUTPUT IN TEXT MODE.
CHECK SY-SUBRC EQ 0.
CLEAR WA_ERR_REC.
LOOP AT I_ERR_REC INTO WA_ERR_REC.
IF WA_ERR_REC-DEL_FLAG = C_TRUE.
TRANSFER WA_ERR_REC TO P_IPERR1.
ENDIF.
CLEAR WA_ERR_REC.
ENDLOOP.
CLOSE DATASET P_IPERR1.
ENDIF.
ENDIF.
ENDFORM. " DOWNLOAD_ERROR_FILE
*& Form BUILD_BDC_DATA
* Populates BDC for all the fields neccessary for Open Contract Creation
FORM BUILD_BDC_DATA.
DATA: L_MAT_INDEX TYPE I,
L_CON_INDEX TYPE I,
L_SCA_INDEX TYPE I.
CLEAR WA_BDCDATA.
REFRESH: I_BDCDATA,
I_MESSTAB.
* Processing the bdc
CLEAR: WA_RECORD,
WA_RECORDPREV,
VEN_FLAG,
MAT_FLAG.
LOOP AT I_RECORD INTO WA_RECORD.
* Checks for the del_flag of the record.
IF WA_RECORD-DEL_FLAG EQ C_TRUE
OR WA_RECORD-DEL_FLAG EQ C_STRUE.
CLEAR WA_RECORD.
CONTINUE.
ELSE.
IF WA_RECORDPREV-LIFNR NE WA_RECORD-LIFNR
OR WA_RECORDPREV-EVART NE WA_RECORD-EVART
OR WA_RECORDPREV-EKORG NE WA_RECORD-EKORG
OR WA_RECORDPREV-EKGRP NE WA_RECORD-EKGRP
OR WA_RECORDPREV-WERKS NE WA_RECORD-WERKS
OR WA_RECORDPREV-LGORT NE WA_RECORD-LGORT
OR WA_RECORDPREV-KDATB NE WA_RECORD-KDATB
OR WA_RECORDPREV-KDATE NE WA_RECORD-KDATE
OR WA_RECORDPREV-ZTERM NE WA_RECORD-ZTERM
OR WA_RECORDPREV-KTWRT NE WA_RECORD-KTWRT.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RM06E-LGORT'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
* Cross-Reference check performed for the given Vendors
CLEAR WA_T024E.
READ TABLE I_T024E INTO WA_T024E
WITH KEY EKORG = WA_RECORD-EKORG
BINARY SEARCH.
IF SY-SUBRC EQ 0.
CLEAR WA_ZMVXREF.
READ TABLE I_ZMVXREF INTO WA_ZMVXREF
WITH KEY D_ALTKN = WA_RECORD-LIFNR
D_BUKRS = P_BUKRS
BINARY SEARCH.
IF SY-SUBRC EQ 0.
PERFORM BDC_FIELD USING 'EKKO-LIFNR'
WA_ZMVXREF-M_ALTKN.
ENDIF.
CLEAR WA_ZMVXREF.
ENDIF.
CLEAR WA_T024E.
PERFORM BDC_FIELD USING 'RM06E-EVART'
WA_RECORD-EVART.
PERFORM BDC_FIELD USING 'EKKO-EKORG'
WA_RECORD-EKORG.
PERFORM BDC_FIELD USING 'EKKO-EKGRP'
WA_RECORD-EKGRP.
PERFORM BDC_FIELD USING 'RM06E-WERKS'
WA_RECORD-WERKS.
PERFORM BDC_FIELD USING 'RM06E-LGORT'
WA_RECORD-LGORT.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0201'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'EKKO-KTWRT'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=AB'.
PERFORM CONVERT_DATE USING WA_RECORD-KDATB V_CONV_DATE.
PERFORM BDC_FIELD USING 'EKKO-KDATB'
V_CONV_DATE.
PERFORM CONVERT_DATE USING WA_RECORD-KDATE V_CONV_DATE.
PERFORM BDC_FIELD USING 'EKKO-KDATE'
V_CONV_DATE.
PERFORM BDC_FIELD USING 'EKKO-ZTERM'
WA_RECORD-ZTERM.
PERFORM BDC_FIELD USING 'EKKO-KTWRT'
WA_RECORD-KTWRT.
VEN_FLAG = 1.
L_MAT_INDEX = 1. "index for table-control of material
ENDIF.
* "first check for itemline
IF WA_RECORDPREV-EPSTP NE WA_RECORD-EPSTP
OR WA_RECORDPREV-EMATN NE WA_RECORD-EMATN
OR WA_RECORDPREV-KTMNG NE WA_RECORD-KTMNG
OR WA_RECORDPREV-NETPR NE WA_RECORD-NETPR
OR WA_RECORDPREV-PEINH NE WA_RECORD-PEINH
OR WA_RECORDPREV-BPRME NE WA_RECORD-BPRME
OR WA_RECORDPREV-IDNLF NE WA_RECORD-IDNLF
OR WA_RECORDPREV-WEBRE NE WA_RECORD-WEBRE
OR WA_RECORDPREV-MEPRF NE WA_RECORD-MEPRF
OR WA_RECORDPREV-LTEX1 NE WA_RECORD-LTEX1
OR VEN_FLAG EQ 1.
V_IND = L_MAT_INDEX.
IF V_IND GT 1.
V_IND = 2.
ENDIF.
CONCATENATE 'RM06E-EVRTP(' V_IND ')' INTO V_EVRTP1.
CONCATENATE 'RM06E-EPSTP(' V_IND ')' INTO V_EPSTP1.
CONCATENATE 'EKPO-EMATN(' V_IND ')' INTO V_EMATN1.
CONCATENATE 'EKPO-KTMNG(' V_IND ')' INTO V_KTMNG1.
CONCATENATE 'EKPO-NETPR(' V_IND ')' INTO V_NETPR1.
CONCATENATE 'EKPO-PEINH(' V_IND ')' INTO V_PEINH1.
CONCATENATE 'EKPO-BPRME(' V_IND ')' INTO V_BPRME1.
CONCATENATE 'RM06E-TCSELFLAG(' V_IND ')' INTO V_TCSELFLAG1.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0220'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=NP'.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0220'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
V_EVRTP1.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=DETA'.
PERFORM BDC_FIELD USING V_EPSTP1
WA_RECORD-EPSTP.
PERFORM BDC_FIELD USING V_EMATN1
WA_RECORD-EMATN.
PERFORM BDC_FIELD USING V_KTMNG1
WA_RECORD-KTMNG.
PERFORM BDC_FIELD USING V_NETPR1
WA_RECORD-NETPR.
PERFORM BDC_FIELD USING V_PEINH1
WA_RECORD-PEINH.
PERFORM BDC_FIELD USING V_BPRME1
WA_RECORD-BPRME.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0211'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'EKPO-WEBRE'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=DETZ'.
PERFORM BDC_FIELD USING 'EKPO-IDNLF'
WA_RECORD-IDNLF.
TRANSLATE WA_RECORD-EVART TO UPPER CASE.
IF WA_RECORD-EVART EQ C_WK.
PERFORM BDC_FIELD USING 'EKPO-WEBRE' 'X'.
ENDIF.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0212'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'EKPO-MEPRF'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TXP'.
PERFORM BDC_FIELD USING 'EKPO-MEPRF'
WA_RECORD-MEPRF.
IF NOT WA_RECORD-LTEX1 IS INITIAL. "NE space.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0106'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RM06E-SELKZ(02)'.
PERFORM BDC_FIELD -
Candidate Data transfer from E-Recruiting System to HR system for New Hiring.
Hi All,
Hope everyone doing in good Spirit.
We are implementing E-Recruiting as Standalone for one of our client.
Can any please help me in regards with Data transfer from E-Rec System to HR System for hiring once the candidate has been successfully completed recruiting process.
You inputs are highly appreciable.
Thank you.
Sekhar.Hello Sekhar,
there are three different scenarios for transferring the data of an external candidate to the HR core for hiring.
the easiest and most commonly used is the RFC connection. When creating an activity of category data transfer the data of the candidate is transferred from eRec to HR core. There it is stored in table T752F. Then you can run transaction PA48. There you can select the candidate and run a hiring action. This is the same action like in PA40 only the system will preset the fields with the values from eRec (similar to batch input).
Instead of using the RFC solution you can transfer the data using PI (this can be activated using a switch in T77S0). To be honest none of my customers is using this. Either they had no PI server at all or they did not use it for eRec
The third was delivered with a business function HCM_HIRE_INT_CI_1. This is based on HCM processes and forms and targeted towards customers using Talent Management Core (e.g. data for education and work experience is transferred into the TM Core infotypes 740X as contrary to the hr core standard infotypes 0022 and 0023 they are structured like the eRec ones). Of course as you can do a lot of customer enhancements to HCMP&F you can replace the behavior nearly completely. One or two of my clients discussed this solution but as far as I know none is actually using it.
The simple truth is most customers seem to not use any integration at all. The first solution is easy to activate but only covers around 13 fields. Compared to a real full blow hiring action this is not even 10% of the fields which have to be entered. So the presetting this small number of fields is not a great help especially as you have to check every information anyways. Furthermore PA48 is not very nice and lacks functions to structure the incoming records which makes it difficult to handle in large distributed organizations.
The other two options require a lot of infrastructure for small functionality. What we discussed with a client was using the new hire integration to preset a full hiring form with eRec data and then send to the candidate as offline form to gather all missing information and use this for hiring. But there were to many issues on data privacy aspects when sending a form with social security data, bank account data, etc. via email. Furthermore they required actual signatures.
Kind regards
Roman -
I used Migration Assistant to transfer from MBP (Leopard OSX 10.6.8) to Mac Mini (Lion OSX 10.7). Documents cannot be "seen" or "found". Ditto Music , movies, and pictures.Stumped!
System Preferences/Users & Groups shows you the various user accounts you have.
Look at your hard drive in the Finder sidebar. You should see Applications, Library, System, and Users. If you look in Users you will see a Shared folder. From the user Migration Assistant created, find the iTunes folder and drag it to Shared. Log out and log in using your normal user account, go to the same place and copy it to Music in your normal user account. Another option is to leave it in shared so any user can access it. You will have to tell iTunes where to find the music by going to iTunes/Preferences/Advanced.
Welcome to the world of Mac. Some ‘light’ reading to help the transition. I don’t recommend trying to get through all of this at once.
A guide for switching to a Mac
Anatomy of a Mac
Mac Basics—Tutorials on using a Mac
Mac OS X keyboard shortcuts,
Mac Basics – Mac Find Out How
Mac Basics – Switching From Windows
Mac OS FAQ
MacTips,
Quick Assist
Switch Basics
Switching to Mac Superguide
Switching to the Mac: The Missing Manual, Mountain Lion Edition
Take Control E-books
Welcome to the Switch To A Mac Guides -
Send control to a specific activity
Is there a way to send control to a specific Activity instead of the next or back to the same activity or to a previous activity when a user presses a button "Back to Activity" on his UI
For e.g.
switch (result) {
case "BackToActivity":
action = BACK;
break;
default:
action = ABORT;
break;
Instead of action = BACK can we write action = "Update Status Activity"?
Edited by: user8766631 on Sep 16, 2009 3:25 PMI agree with Nils.
You could accomplish something similar to this using the Grab activity. The Grab that has a "from all / to all" property set can send an instance from anywhere to anywhere in the process. I'd caution you to go lightly using this and only put a Grab in a supervisor's role. Moving work items can be risky and dangerous (haven't used that phrase in a while) in a production system if the end user doesn't know what they are doing. Don't give all end users the Grab capability or you will have chaos instead of a process.
You could let the end users keep the instance in the same activity (instead of always having the instance move to the next activity) a couple different ways. You can have the presentation have a "Save" button with the "save" action. This will save the user's changes, but keep the instance in the same activity. You can set the action predefined variable to "REPEAT" in a screenflow to keep the instance in the same activity.
Just my opinion, but try to push back on the requirement to send the instance to the previous activity unless there is a need to collaborate. If this is a collaboration design pattern, then use a conditional transition to go back.
Hope this helps,
Dan -
What is diff b/w pick and switch activity in bpel?
what is the difference between pick activity and switch activity in BPEL? example Please
1)The switch activity is an IfElse with two different flows, based on a conditional expression, derived out of existing message(s) in your process.
Eg. i) Whether the salary is greater than 10,000 or not.
ii) Whether the age is greater than 60 or not.
iii) whether the department is finance or not.
2)The pick activity is an IfElse with two different flows, based on two different messages/signals, that you can expect to receive(when you are waiting for a message) from outside of your process.
Eg. i) whether you received a reply message or a timeout signal.
ii) whether you received a AddNewEmployee message or UpdateEmployee message.
The (decision for which route to be taken for) pick activity is based on the MessageType, while the switch is based on the contents in a message. The pick activity implies that you are waiting for a message, this can occur, at the start of your process or in the mid of your process. However, switch activity doesnot wait for any message, hence can only occur in the mid of the process and can not be the start of a process.
Mark the posting appropriately as "helpful" or "correct answer", if your issue is solved. -
How do I transfer from Persona to Firefox accounts if I am a developer?
Okay, I've read this: https://bugzilla.mozilla.org/show_bug.cgi?id=1063153 and https://support.mozilla.org/en-US/kb/use-firefox-accounts-manage-your-marketplace-apps
it says, just click on 'Sign in now to transfer your account' to transfer. But, guess what? There is no 'Sign in now to transfer your account' anywhere!!
I'm a programmer and I'm getting really pissed because I don't have access to my app anymore. This is very messed up. Is it because I missed the cut off date??? Because the email I got said I'd get an activation link to transfer from Persona to Firefox, but I never did..
Please advise!! I cannot in good faith recommend to anyone that Firefox OS development is a good idea at this point until this gets resolved because its messed up!!Hi moesingh,
Are you able to sign in to either of the sites below?
* [https://accounts.firefox.com/signup]
* [https://account.services.mozilla.com/]
If so, do you get any messages about transferring your Sync to Firefox Accounts? Please let us know if you see any error messages so that we can investigate.
- Ralph -
I want to transfer from Adobe Photoshop Elements 6 on Windows XP to Adobe Photoshop Elements 12 on the Mac. My problem is I have lost my catalog and Windows XP. I need help.
I have installed the newest Mac version of Adobe Photoshop Elements 12 (PSE 12 Mac) and it seems to work fine but I have not been able to access my old (XP, PSE6) catalog file.
I am working on a MacBook Air running OSX version 10.9.2. I have been using Parallels Desktop 9 Switch-to-Mac-Edition™ to run Windows virtual machines. I had been working for over a year running Photoshop Elements 6 on Windows XP virtual machine. The XP operating system was updated to 2/28/14.
When I installed Windows 8, the Parallels program initially offered me a choice of virtual machines, Window XP or Windows 8. I could use the XP version to work with Photoshop Elements 6 as before and thought I could be leisurely about transferring my Photoshop operations to the Mac side.
However, without my knowingly doing anything to dispose of Windows XP, I have “lost” Windows XP. Perhaps it occurred when I updated to Windows 8.1. At any rate, now I have access only to Windows 8.1.
To compound the problem the Time Machine backup program for the Mac was not backing up the XP virtual machine files as I had thought. I have since corrected the settings but I do not have a copy of Windows XP nor of the Adobe Photoshop Elements catalog which I used in the past.
Moreover, I do not have a workable Windows XP disk; the only one I could find is from Dell and it does not load on my MacBook Air. I see Windows XP disks offered by Amazon for about $30 and have thought about buying a copy to help see if I could accomplish the transfer of the catalog file to my Mac. I would use XP only to accomplish this transfer.
I am not completely confident that reinstalling Windows XP would actually enable me to do the transfer and I can foresee potential big problems. Therefore, before taking that step I thought that I would check with you to see if there is a way to find the catalog file and perhaps to modify it so that I could work in the Mac Environment.
I have used Elements to improve and organize over a thousand travel and family photos taken with a pocket size digital camera. Being a nonprofessional, I have edited mainly by cropping and using Quick Fix but have many hours invested. Yes, I still have the originals and probably could have redone much of that work with the time I have invested in trying to find the missing XP and catalog.
I have found two large HDS files (Windows XP.hdd and Windows XP (2).hdd) that were created 7/15/12. I suspect they may be important but am not sure what they are. I read that HDS files are commonly Windows media digital rights management files, DRMs. HDS files may also be used by hierarchical data systems. Do the names suggest anything about Photoshop?
Can you help me find the catalog and transfer it for use with the Mac Adobe Photoshop Elements 12?See this link:
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html -
How to populate a sharepoint 2010 from the active directory.
I want a list of all the computers in the active directory,
another one with all users.
I want also to populate a sharepoint 2010 list from the sharepoint user profiles.
Thanks
szWhile
the contacts list is usually filled out for contacts that are outside the company, there are times when you would use a contacts list to store internal and external resources. Wouldn’t it be nice if you didn’t have to re-type your internal contacts’
information that are already in the system? Now you can with a little InfoPath customization on the contacts list.
Here’s our plan:
Create the contacts list, and open in InfoPath
Create a data connection to the User Profile web service
Customize the form adding some text, a people picker and a button
Create InfoPath rules that will populate the contact fields from the user fields in the User Profile store
Let’s get going! Before we begin, make sure you have InfoPath 2010 installed locally on your computer. I also want to give credit Laura
Rogers and Darvish Shadravan’s book Using
Microsoft InfoPath 2010 with Microsoft SharePoint 2010 Step by Step. I know it looks like a lot of steps, but it’s easy once you get the hang of it.
So obviously we need a contacts list. If you don’t already have one, go to the SharePoint site where it will live, and create a contacts list.
From the list, click the List tab on the ribbon, then click Customize form:
So now we have our form open in InfoPath 2010. Let’s add our elements to the form.
Above all the fields, let’s add some text instructing users what to do with the the field we’re about to add (.e.g To enter an existing user’s information, choose the user below).
Insert a people picker control by clicking the Person/Group Picker control in the Controls section of the ribbon. This will add a column to the contacts list called group.
Below the people picker, insert a button control from the same section of the ribbon as above. With the button still highlighted, click the Control Tools|Properties tab on the ribbon.
Then in the Label box, change the text to something more appropriate to our task (e.g. Click here to load user data!).
You can drag the button control a little larger to account for the text.
We should end up with something like this:
Before we can populate the fields with user data, we need to create a connection to the User Profile Service.
Add a data connection to the User Profile Service
Click the Data tab on the ribbon, and click the option From Web Service, and From SOAP Web Service.
For the location, enter the URL of your SharePoint site in the following format – http://<site url>/_vti_bin/UserProfileService.asmx?WSDL. Click Next.
Note - for the URL, it can be any SharePoint site URL, not just to the site where your list is.
For the operation, choose GetUserProfileByName. Click Next.
Click Next on the next two screens.
On the final screen, uncheck the box for “Automatically retrieve data when form is opened”. This is because we are going to retrieve the data when the button is clicked, also for performance reasons.
Now we need to wire up the actions on our button to populate the fields with the information for the user in the people picker control.
Tell the form to read the user from the people picker control
Click the Home tab on the ribbon.
Click the button control we created, and under the Rules section of the ribbon, click Manage Rules. Notice the pane appear on the far right.
In the Rules pane, click New –> Action. Change the name to something like “Query and load user data”.
Leave the condition to default (none – rule runs when button is clicked).
Click the Add button next to “Run these actions:”, and choose “Set a field’s value”.
For Field, click the button on the right to load the select a field dialog. Click the Show advanced view on the bottom. At the top, click the drop down and choose the GetUserProfileByName
(Secondary) option. Expand myFields and queryFields to the last option and highlightAccountName. Click ok.
For Value, click the formula icon. On the formula screen, click the Insert Field or Group button. Again click the show advanced view link, but this time leave the data
connection as Main. Expand dataFields, then mySharePointListItem_RW. At the bottom you should see a folder called group (the people picker control we just added to the form). Expand this, then pc:Person,
and highlightAccountId. Click Ok twice to get back to the Rules pane.
If we didn’t do this and just queried the user profile service, it would load the data of the currently logged in user. So we need to tell the form what user to load the data for. We take the AccountID field from the people
picker control and inject into the AccountName query field of the User Profile Service data connection.
Load the user profile service information for the chosen user
Click the Add button next to “Run these actions:”, and choose Query for data.
In the popup, for Data connection, click the one we created earlier – GetUserProfileByName and clickOk.
We’re closing in on our goal. Let’s see our progress. We should see something like this:
Now that we have the user’s data read into the form, we can populate the fields in the contact form. The number of steps to complete will depend on how many fields you want to populate. We need to add an action step for
each field. I’ll show you one example and then you will just repeat the steps for the other fields. Let’s update the Job Title field.
Populate the contact form fields with existing user’s data
Click the Add button next to “Run these actions:”, and choose “Set a field’s value”.
For Field, click the button on the right to load the select a field dialog. Highlight the field Job Title.
For Value, click the formula icon. On the formula screen, click the Insert Field or Group button. Click the Show advanced view on the bottom. At the top, click the
drop down and choose theGetUserProfileByName (Secondary) option. Expand the fields all the way down until you see the Value field. Highlight it but don’t click ok, but click the Filter
Data button, then Add.
For the first dropdown that says Value, choose Select a field or group. The value field will be highlighted, but click the field Name field
under PropertyData. Click Ok.
In the blank field after “is equal to”, click in the box and choose Type text. Then type the text Title.
Click ok until you get back to the Manage Rules pane. The last previous screen will look like this.
We’re going to update common fields that are in the user’s profile, and likely from Active Directory. You can update fields like first and last name, company, mobile and work phone number, etc. For the other fields, the
steps are the same except the Field you choose to update from the form, and the very last step where you enter the text will change. Here’s what the rules look like when we’re done:
We’re all done, good work! You can preview the form and try it now. Click Ctrl+Shift+B to preview the form. Once you’re satisfied, you can publish the form back to the library. Click File –> Quick
Publish. Once it’s done, you will get confirmation:
Now open your form in SharePoint. From the contact list, click Add new item. Type in a name, and click the button and watch the magic happen! -
Computer was stolen--how to transfer from iPod to new computer
My computer was stolen and I want to transfer my iPod library to my new computer. I know how to transfer from one computer to another using an iPod but is there a way to do it when I don't have the computer that has my iTunes library?
There are a number of third party utilities you can use to retrieve the files from your iPod. This is just a selection.
YamiPod
PodUtil
PodPlayer
iPodAgent
There is also a manual method of accessing the iPod's hard drive posted in this thread: iPod to iTunes
If your iPod was set for automatic update change it to manual update. While connecting the iPod to the computer, hold down the Shift + Ctrl keys. This will stop the iPod from auto-syncing with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 3 and 30 seconds depending on your computer. Then go to Preferences>iPod and check the "Manually manage songs and playlists" box.
Keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync again.
Another way is to connect your iPod and before it starts to sync, click the little X on the right hand side of the display beside the "Do Not Disconnect" message. The display is the little window to the right of the iTunes control buttons: iPod Interface
Or you could look at the method described in this link: How to keep iTunes from automatically updating your iPod
Go with whichever method you feel most comfortable. If at any point you are asked if you want to link your iPod to a new library, click No. -
Transfer from a 3GS to 5, but keep the 3GS for all but Phone use
I have ordered an iPhone 5, currently have a 3GS. I plan to backup everything on the 3GS and then restore to the iPhone 5 using iTunes. Will I still be able to synch my 3GS when I plug it into iTunes to keep my applications etc. up to date? Will iTunes recognize both devices, the 3GS and the new iPhone? Do I need to disable anything on the 3GS if I basically want to use it as an iPod without calling capability? I am switching carriers from AT&T to Verizon. I saw some mention of taking the SIM card from the new IPhone 5 and plugging into the 3GS before I synch, but then what do I do? I assume I have to return the SIM card to the iPhone 5. What about the old card in the 3GS?
OK! I have my new iPhone 5 and the entire transfer from the 3 GS went well. All my apps, music, photos, contacts, calendat etc. were transferred over, and all the files went into their previously designated folders. One problem! I cannot find FACETIME and the new MAP icons anywhere! I have OS 6 of course. There is are no icons either on the phone, or any named Apps in iTunes under the IPhone 5 apps list. Nothing in the "search" findings in the iPhone. Where did they go? I used iTunes to replace my existing GS, and I did n otice that iTunes first backed up whatever came with my iPhone 5 before restoring my settings from the 3GS and then later synching to hget all my apps etc. I have Facetime on my iPad and iMac, so it might be nice to use it occasionally with others from the iPhone 5. BTW, my Google Maps app. was synched over to the Phone 5, so I still have it, but no new maps program from Apple. Where did all these go, and how do I get them back to the iP 5??
Maybe you are looking for
-
Text created in Premiere showing other text files in the timeline and exports.
Hi, I'm creating slates with text generated in Premiere. For each new slate I am duplicating a text layer, Option + Dragging the duplicate file over the text I'd like to replace, then opening the new text layer in the text editor and updating the inf
-
I recently tried upgrading my iphone 4 to the new OS 5, and now itunes won't continue the activation process. It keeps say that an unexpected error has occured, Error 310. I am very frustrated and now have no phone to call apple, and there website is
-
Error message when downloading a free song.
I got the error message "Credit Balanace unavailable. Try again later." I have never seen or received this message in relation to a free single download, or in relation to any other action in iTunes. Can anyone share any insights into this. Is thi
-
Request procedure for migrating PPC 10.4 Server setup to Intel 10.4 Server
Here's the background: I've got a G5 Xserve running 10.4.11 Server. It's and OD Master, Windows PDC and AFP, NFS & SMB file server for my whole department. We've purchased a new Intel Xserve (prior to Leopard - I'm not ready to go there yet), but I'm
-
Add link to a folder in fileshare
Hi, i want to add a column to a list, when the value in this column is a link to a folder in fileshare. can someone help with the syntax? keren tsur