Control usb port from another location

I have to turn usb port on and off so much through out the day and night and want to know how I can do this when I'm away from the lab. 

Hello,
Here is another DF thread abd KB article  that may be if some use. I hope this helps! Regards,
National Instruments
Applications Engineer

Similar Messages

  • How do I control my mac from another mac not in the same network?

    How do I control my mac from another mac not in the same network? Thanks

    You can do it manually, but it is much simpler if you use a tool such as Back To My Mac, LogMeIn, or something like that. Those programs enable you to connect to your computer through your router without you having to adjust the router settings manually.

  • Okay how can I tell if someone has installed spyware on my phone or if they have accessed your phone records or history from another location

    I think someone has been going thru my phone or accessing my information from a different location other than in my phone itself is there anyway to tell if someone has installed spyware or accessed any of my information on my phone or from another location or from the phone itself

    The only way someone can install spyware on your iPhone is by hacking/jailbreaking the iPhone followed by installing the spyware from an unofficial source other than from the iTunes Store. This would require having physical access with the iPhone and a computer. Has someone had access to your iPhone with a computer without your knowledge?
    Someone could have access to your iMessages and iCloud photostream with another iOS device and with a Mac that supports iMessage (a PC could have access to your iCloud Photo Stream, not iMessages) if they know your iCloud account password and/or Apple ID password if your iCloud account and Apple ID are different.
    If someone has had access to your iPhone with a computer without your knowledge, you can always restore the iPhone with iTunes as a new iPhone or not from the iPhone's backup. If you think someone has access to your iCloud account, you can change the password for the account along with your security questions and answers.

  • Can I use a USB hub to connect to multiple USB ports from one GPIB-USB-HS?

    I have one instrument which has a GPIB-USB-HS connected and the USB cable is connected to a USB hub. Can I have multiple PCs to connect using USB hub at their respective USB ports? If so, how many PCs can I connect using the USB cable?
    I have downloaded the latest NI-VISA from the website.
    Solved!
    Go to Solution.

    You would first need a hub that allows you to switch between multiple pc's and then only one pc at a time would be connected and in control.
    When you buy this special type of hub, one of the specs is how many pc connections it has.

  • USB install from another mac?

    Hi, quick one if I may, I am looking to reinstall snow leopard on a new hard drive so my question is can I copy the necessary files from a friends Mac mini onto USB and boot from there? Obviously I'm not going to do this if it's illegal or whatever, thanks in advance

    If you own a retail DVD installer for Snow Leopard 10.6, but do not have an optical drive in your computer, or the internal one has failed, it is possible to use another computer's optical drive to install OS X into a Mac.
    {A copy from another Mac would not be correct or legal, also it likely won't work directly as the Installer puts correct parts into the machine it was installed into, such as hardware drivers, etc. And the disc is a license for one Mac to run it at a time.}
    Under this circumstance, there are a few methods of using another Mac to perform this task; one is Target Disk Mode, if both Macs have FireWire &/or Thunderbolt ports and correct cables. Another is to use a utility in the Mac by the name of 'remote install Mac OS X' in the Utilities folder. There may be other similar means, depending on the version of computer and OS X your system(s) are running.
    If only parts of the system are damaged or missing, you could use Pacifist utility from charlessoft company to extract the parts you need from a system disc, and it will install them from the desktop of the computer that needs them. The utility is a download and has a demo mode that should work adequately for this task.
    You should own the retail DVD 10.6 Snow Leopard, if you have a computer that runs it. The disc (as needed) is proof of the License to use the software. With later computers, the Apple ID and the mac/app store has a record of your activity in regard to permissions of use and end user license.
    Sorry to not be of much help.
    I have antiques & most DVD media for each system.
    And a few clones on external hard disk drives.
    PS: Not sure about the copy to USB recovery idea; later Lion 10.7 and Mt Lion
    had this, I'd seen info about it online. A cloned system, if your computer had one
    could be used to extract or copy parts from. Some don't like drag/drop install.
    Good luck & happy computing!
    edited 3x

  • Downloading music via the USB port from Zen

    I love my Zen but it would be nice to be able to dock it and listen to it when connected to my PC?or the USB port on my car radio, neither work in this mode. The car radio works fine when WMA files are loaded from a USB jump dri've but when the same files are on the ZEN they do not load from the USB port. The car radio manufacturer says it supports iPOD connection. On the PC I have to copy the files to another dri've to listen to them which is daft.

    Thank you for your reply.  I know I can use a card reader however I don't see why I should when importing directly from my camera has worked reliably for years.  The process I use is simply connecting the digital output from my camera to the USB port on the iMac, which has previously automatically opened iPhoto ready for the import.  Now all of a sudden my iMac does not recognise the camera.  However if I connect in the same way to my MacBook then iPhoto opens automatically on the MacBook, recognises the camera and is ready for importing.  So whilst I know I can use a reader, or my MacBook I want to use my iMac in the same way that I have for years.  I can only assume that the settings on the iMac may have changed, but I cannot verify this.

  • Macbook not recognizing USB ports from external monitor.

    I have a Dell Monitor hooked up to the VGA port and have several items (printer, external hard drive) hooked into the ports on the Dell monitor. My Macbook is not recognizing the things that are plugged into the monitor.
    These ports were working at one point but when I moved my setup and had to plug everything back in I can't get the USB ports on the monitor to work.
    Along the same lines...I tried connecting the monitor to my laptop with a USB cable (female port from back of monitor to male port on Macbook) along with the VGA port. This did not fix the problem but I just wanted to know (had my laptop been recognizing the ports) if this was even necessary.
    Since this setup has worked before I'm thinking it is something small that I am missing but any help would be appreciated.
    Macbook Pro   Mac OS X (10.4.7)  

    Hi,
    Please go to the following site and click Scan now:
       http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=31841...
    Hope this helps.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Mapping to disk on Airport Extreme's USB port from G5 over Ethernet

    I just set up my Airport Extreme network, with multiple machines (Windows XP, Vista, Mac G5, iPad and iPod Touch) sharing the internet connection via both Ethernet and WiFi without any problem.
    My XP and Vista machines are connected via WiFi, and I was asked to supply the shared disk's password, and once I provided it, I was able to see the drive attached to the USB port on the Extreme.
    My Mac G5 is connected to the Airport via Ethernet. It never asked me for the shared disk's password, adn I could not see the drive in Finder.
    Any suggestion on how to map to the shared drive over Ethernet will be greatly appreciated. Thanks! /Kenny

    Any suggestion on how to map to the shared drive over Ethernet will be greatly appreciated.
    It really shouldn't make any difference whether the G5 is connected by Ethernet or wireless, the AirPort Disk should be "visible" in the Finder sidebar.
    If not already, be sure that you have either or both "Connected servers" & "Bonjour computers" enabled in Finder Preferences > Sidebar.

  • I am a senior citizen newbie to apple.  I have just downloaded my pictures from my camera.  How do i remove my usb port from my mac pro without damaging anything?

    I am a senior citizen newbie to apple.  I have just downloaded my pictures to my Mac Pro.  How do I remove the usb port without damaging anything.  I know I shouldn't just pull it out.

    The iphone is a "plug and play" device.  It is safe to unplug it without "ejecting it".  If you want to be sure it is safe open itunes and under devices next to your iphone you should see the eject symbol like a line with an up arrow above it, click that.  Once you no longer see the iphone listed under devices it'll be safe to remove.

  • Using import script to read data from another location

    Hi,
    I need to find a way to import, in one location, the data of all other locations (with some additional transformations) using an integration script.
    I think I should be able to read from the recordset returned by farsTable, but I need to know how to find the table name that contains the data from my other locations.
    Thanks in advance,
    Julien

    First you will need to read the tpovlocation table to get the location key and segment key for each location to be read. You can then either read the relevent tdataseg(index) table where the index is the segment key from the location table, or alternatively you could try to access the data from the View (which i think is Vdata) in which case you you will not need the segment key.

  • Will the USB port from the Time Capsule power an external hard drive?

    I am interested in purchasing an external hard drive (Iomega 1TB Helium Portable or G-Technology 750GB G-DRIVE mobile)
    to connect to my time capsule, expanding my wireless storage, but I want to know if the Time Capsule has a powered USB port or does the drive I purchase need to have its own power source? Also, Is there any compromise to using a drive that is USB powered, vs one that requires a power source?
    Thanks!

    Even if the hard drive that you choose has its own power supply, you usually need to use a powered USB hub with the Time Capsule.
    Reason....the USB port on the Time Capsule is under powered. You should not really rely on this port to power anything except a single printer.

  • Access Time Capsule from another location

    My Time Capsule works well in my WiFi at home with both automatic backup of my Macbook Pro and to save large files on.  What are the setting i need to add to be able to access the files from another WiFi system away from home?

    There is a lot of setup involved..
    The TC must be the main router of the network.. it cannot be bridged.
    The wifi network you are attached to remotely must give you a full public access IP address. Find the public IP of the TC and see if you can then access it.
    Do not ever expect this sort of thing to be completely straight forward.
    Read the many many posts about remote access. There are different methods if BTMM doesn't work.
    See AirPort
    Remote access article as a starting point.

  • Executing bat files from another location

    Hi
    In my application i need to execute a bat file which is in another location.
    i have my class file in c:\ds and i want to execute the bat file in c:\ds\src\jython.
    This is the code i have used
    private void executeBootstrapBat(){
    String cmd=null;
    cmd="cmd /c bootstrap C:\\DS\\HelperApplication\\src\\conf\\wsadmin-local.properties" +
    " " + getXmlFileName() + " " + getVOB();
    Runtime rt = Runtime.getRuntime();
    try{
    Process pt = rt.exec(cmd);
    }catch(IOException e){
    e.printStackTrace();
    }

    You can execute the bat file in any location. Butyou
    have to set the classpath in that location whereyou
    are executing the bat file.Please stop giving advice on this site. You do not
    have any clue what you are talking about at all.Actually I just went looked at a few more of your posts. All complete rubbish. Again please stop posting replies on this site until you get some clue about anything. It is very wrong of you to post replies like you know what you are doing and misleading those who don't know any better.

  • Fading between two pages & controlling one MC from another.

    Let me see if I can explain this properly. I usually use a motion tween and the alpha channel to fade movie clips in or out. What I am currently trying to do is fade one page out and another in, but it could be one of several MCs. I basically have four "pages" for a website including services, portfolio, about, and contact. I have icons on my navigation bar (which is going to be imported into my XHTML seperately so it can float them according to the users window size). The icons need to navigate between the pages and the pages need to fade in and out (eg. fade in the Services MC when the user clicks on the services icon, and fade out of it and into the Portfolio MC when the user clicks on the portfolio icon). Please keep in mind that the icons and pages are in completely different .fla/.swf files because I couldn't figure out how to float them in Flash after several hours of looking around online, but know I can easily do it using div tags + CSS in XHTML.
    If someone could quickly explain how to "gotoandplay" a label in a different .swf file (communicate between the .swf NavBar and my main .swf) as well as fade out of the current MC (whichever page the user is currently on) before fading into new page (according to the icon the user clicks on), I'm sure I could 'fill in the blanks' from the rest of the AS3 and Flash I already know. The page also needs to fade out of whatever page it's currently on when the user clicks on the hide button (located on the page in the main .swf file). There is also several subpages on each page (which shouldn't be a big deal if I can figure the rest of this out).
    I'm going to be using this same concept for nearly all of the websites I design & develop in the future and really need to know how to do this for the current site I'm working on. I would greatly appreciate any suggestions on how to accomplish these two things.
    P.S. Please keep in mind I'm not an advanced user in AS3, but am very computer savy, and have done my share of programming in the past. I looked around for hours online to try and complete this without using the forum, but have come up with links to dead tutorials and short answers left and right. I'm hoping I won't come across the same here.
    From what I've read so far I believe I can use tweening in ActionScript instead of a motion tween on the timeline to fade in and out of clips and believe that's the method to use to accomplish what I'm trying to do. Correct me if I'm wrong though.

    I'm not looking for a "tutorial created especially for me".... Just perhaps someone that can copy and paste some code from a similar project that they have done so I understand how to do it.
    You could have simply put here's a tutorial for how to use TweenLite to crossfade between four pages, and here's one that will let you pass information between two .swf files. If you recently watched the tutorials then it wouldn't take long to find them (maybe you have them bookmarked) and post a couple links.
    Anyways, I just found an excellent tutorial on how to crossfade using TweenLite (found here) and an article that explains how to pass information from one .swf to another (here). It took some searching and knowing exactly what I was looking for to find them, but that's a much better answer for someone looking to do those two things than I've found here (or elsewhere for that matter).

  • Are you having wrong number display in "My Number" on iPhone 4S after porting # from another carrier? Try this.

    My story: I am in the US. I went from carrier AT&T to Sprint, and ported my old number over after purchasing and recieving a new iPhone 4S from Sprint. Since the phone was shipped, I waited to port until I had the phone in hand to avoid changeover delays.
    All worked fine except:
    Sometimes when texting to my contacts, they reported the number showing up as the # issued to te phone when shipped, not my old ported #.
    "My Number" on iPhone 4S showed shipped number, not ported number.
    I discovered the problem is the number rooted in "My Number". Since it didn't change as expected, certain functions including Facetime and iMessage referred to "My Number".
    So here's the fix:
    From your Sprint iPhone 4s, dial ##873283#
    A pop-up window will open, hit OK to "Start Service Update".
    Another pop-up will open shortly, "Service Update Complete", Hit "Done"
    Power cycle your iPhone 4s. You're now done. All should be fixed.
    I don't claim coming up with this fix. I discovered it after trolling many forums on the subject to find one that fit my exact circumstance. This may work on your carriers as well, but refer to your carrier service tech support to make sure the Service Update code is the same. I shared this fix with Sprint Support, as they knew nothing about it, and it's become part of their normal procedure to address this particular issue.
    Hope it helps for you!
    Oz

    Thanks, this really worked! I'll recomend this post to friends.

Maybe you are looking for