Control Volume on an AV Receiver with the Verizon P265 remote
Hi,
Is there a way to program the Verizon P265 Remote to control the volume on a AV Receiver. Previous versions of the Verizon remote were able to do this but I can't find a way to do it on the new one.
Thanks,
Solved!
Go to Solution.
prisaz wrote:
Justin
You could have fixed my grammar when quoting.
Why is the site so darn slow today?
Slow? Seems a little faster than usual for me (but still slower that most sites....). Must be interference from all of the left over hot air from all of the politicians just down the road from you, even though they are all out of D.C. on vacation.....
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9
Keller, TX 76248
Similar Messages
-
HT1947 Can I control the volume of my MacBook Pro with the remote app on my IPhone or IPad?
Can I control the volume of my MacBook Pro with the remote app on my IPhone or IPad?
Welcome to the Apple Community.
To an extent yes. You can't control the master volume, but tou can turn the volume up and down, up to the maximum set manually on your computer. -
When I pre ordered my iphone 6 i was told I was going to get an additional 1 gig of data per month for a year. It even shows it on the receipt i received with the phone. When will I see that reflected on my account. I have had my new phone for a week and used tons more data than usual and am hoping that will save me this month.
concretedonkey, I'm glad you were able to take advantage of this offer when you ordered your new iPhone 6. I can certainly review your account to ensure this was added for you. Please reply to the direct message I have sent you.
AndreaS_VZW
Follow us on Twitter @VZWSupport -
Hi all,
at a customer’s site I’ve a problem with a fresh installation of Backup Exec 2014. Every backup (full or incremental) always reports the following
error: “An unexpected error occurred when cleaning up snapshot volumes. Confirm that all snapped volumes are correctly re-synchronized with the original volumes.”.
It’s not a Backup Exec problem itself, also backups using “Windows Server Backup” failing with the same error.
On this site I have three servers; the error is only generated for one of them. Here’s a short overview:
Server1: Windows Server 2012 R2, latest patchlevel, physical machine, Domain Controller and Fileserver. Backup Exec is installed on this machine,
backup is written directly to SAS tape loader. There error is generated on this server.
Server2: Windows Server 2008 R2, latest patchlevel, virtual machine, running on Citrix Xen Server 6.2. Used for remote desktop services, no errors
on this server.
Server3: Windows Server 2012 R2, latest patchlevel, virtual machine, database server with some SQL Instances, no errors on this server.
As I said, error is reported only on server1, no matter if it is a full or an incremental backup. During the backup I found the following errors
is the event log (translated from a german system):
Event ID: 12293
Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider. "{89300202-3cec-4981-9171-19f59559e0f2}" an error occured. Routinedetails Error calling Query(). [0x80042302] [hr = 0x80042302, unexpected component error of
the Volume Shadow Copy Service.
Process:
Volume Shadow Copy polling
Volume Shadow Copy delete
Context:
Executioncontext: Coordinator
Executionkontext: Coordinator
And
Event ID: 8193
Volume Shadow Copy Service error: Unexpected error calling Routine "IVssCoordinator::Query" hr = 0x8004230f, Unexpected error Volume Shadow Copy Service Provider
Process:
Volume Shadow Copy delete
Context:
Executioncontext: Coordinator
There are some articles about this error in the knowledge base or web which does not help or do not apply to my environment for example:
http://www.symantec.com/business/support/index?page=content&id=TECH38338&actp=search&viewlocale=en_US&searchid=1423724381707
What I already have tried:
Disabled Antivirus during the whole backup
Installed latest Service Pack for Backup Exec
Rebooted the server
vssadmin list writers do not show any errors
consult eventid.net for other possible solutions
no limits set for vaa
Anymore ideas from you guys?
Best regards,Hi Shaon,
vssadmin list providers gave the following output:
vssadmin list providers
vssadmin 1.1 - Verwaltungsbefehlszeilenprogramm des Volumeschattenkopie-Dienstes
(C) Copyright 2001-2013 Microsoft Corp.
Anbietername: "Microsoft File Share Shadow Copy provider"
Anbietertyp: Dateifreigabe
Anbieterkennung: {89300202-3cec-4981-9171-19f59559e0f2}
Version: 1.0.0.1
Anbietername: "Microsoft Software Shadow Copy provider 1.0"
Anbietertyp: System
Anbieterkennung: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7
Unfortunately theres not Symantec VSS Provider listed.
Best regards,
Christoph -
What are the standard def channels you receive with the SD receiver?
Nowhere on the site can I find a clear definitiion of what you receive with the $5.99 SD receiver as opposed to what you get without it. I can see that you get up to CH 49 with a std cable TV tuner but I don't see what else you get with the $5.99 setup. Is it ALL channels not marked HD (with the exception of pay things like HBO etc)? Just looking for some clarity. Thanks.
You get almost everything non-premium (HBO, STARZ, Showtime, Cinemax, etc. are excluded) below 500 (if you're not subscribed to extreme HD or sports in NY/NNJ you also won't get some of the sports channels in the 300's) and all the music choice channels.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. -
When using Microsoft Backup on a Windows Server 2008 SP2 (not R2 - [Microsoft version 6.0.6002]) I get the error "The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the
error 0x80042316"
The odd thing is that when I start the backup manually, it works fine. When it runs automatically the error appears.
When doing a SFC /scannow I do get errors that can't be corrected.
Is there anything short of rebuilding this machine (It's a DC and the only one this office has) I can do to fix this?Hi,
0x80042316 means "Another shadow copy creation is already in progress". This error could occur when another VSS instance is running.
Is there any third party backup application installed? Try to uninstall it to see the result. And please also check if there is another backup schedule which causes the conflict.
Meanwhile please provide the result of:
vssadmin list providers
vssadmin list writers
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
Hi,
I do have Crashplan ProE running. It started at 1900 and the Windows Backup starts at 2000. I have modified Crashplan not to start until 2300 to see if that helps.
Also:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
Provider type: System
Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7
AND:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Writer name: 'System Writer'
Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {f0c7ee55-5885-4894-8dd3-14fffbdd4d2e}
State: [1] Stable
Last error: No error
Writer name: 'SqlServerWriter'
Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
Writer Instance Id: {017a0133-7577-4322-b513-04f72404b70a}
State: [1] Stable
Last error: No error
Writer name: 'ASR Writer'
Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
Writer Instance Id: {6b17d670-9ea8-4ff1-a59e-b474f4b893db}
State: [1] Stable
Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Writer Instance Id: {56aad1bf-9bf1-4fde-b2f4-a706577c632d}
State: [1] Stable
Last error: No error
Writer name: 'COM+ REGDB Writer'
Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {e942d09d-276e-450a-9bf4-b1d5abe6af8a}
State: [1] Stable
Last error: No error
Writer name: 'Registry Writer'
Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {3737164b-61ac-454c-b1f7-42f2620f10db}
State: [1] Stable
Last error: No error
Writer name: 'DFS Replication service writer'
Writer Id: {2707761b-2324-473d-88eb-eb007a359533}
Writer Instance Id: {39458257-aca4-481e-a302-994f3eb1e9a3}
State: [1] Stable
Last error: No error
Writer name: 'Dhcp Jet Writer'
Writer Id: {be9ac81e-3619-421f-920f-4c6fea9e93ad}
Writer Instance Id: {6a8ab4aa-760c-4102-a27f-58f570c9c572}
State: [1] Stable
Last error: No error
Writer name: 'NTDS'
Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
Writer Instance Id: {53577013-8397-448e-9a25-c7cac08aa0a8}
State: [1] Stable
Last error: No error
Writer name: 'IIS Metabase Writer'
Writer Id: {59b1f0cf-90ef-465f-9609-6ca8b2938366}
Writer Instance Id: {ee2c9173-92e7-455c-8f73-601647c0ddb2}
State: [1] Stable
Last error: No error
Writer name: 'BITS Writer'
Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
Writer Instance Id: {b1f60392-9dfd-4e3a-bda6-3dc2cb622ba4}
State: [1] Stable
Last error: No error
Writer name: 'IIS Config Writer'
Writer Id: {2a40fd15-dfca-4aa8-a654-1f8c654603f6}
Writer Instance Id: {a328aede-78f0-448e-9c36-e8379e9fe2a8}
State: [1] Stable
Last error: No error
Writer name: 'WMI Writer'
Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {c39fa334-5c9d-4906-a3b5-33c3444948e6}
State: [1] Stable
Last error: No error
Writer name: 'NPS VSS Writer'
Writer Id: {35e81631-13e1-48db-97fc-d5bc721bb18a}
Writer Instance Id: {3c9c5584-b5fd-48cf-8541-0c8bfa585ca0}
State: [1] Stable
Last error: No error -
I am trying to install premier elements 11 that I purchased back in 2012 on a new machine with 8.1. I get "invalid serial number" when I enter the serial number I received with the original activation e-mail when I purchased the product, thanks!
Error "The serial number is not valid for this product" | Creative Suite
-
Suddenly most of the applications have no sound and I can't adjust the volume, and when I try with the volume button, appear the message "sound effect" and nothing append
Hello, Miryam Maria.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues with sound on applications when playing video/audio content. If this is the case, the first thing I would check is if the side switch is set to silent as this can cause applications to be mute. Below I have included an article that covers adjusting the settings for the side switch. Also, make sure to close all applications in Multitasking and power cycle the device. Test the sound issue after processing these steps.
iPad: Understanding the side switch
http://support.apple.com/kb/ht4085
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Cheers,
Jason H. -
I am using webmail from USA Cable, which uses warpdriveonline. They are still researching my problem but think it might be browser related. Most but not all email I send is received with the body blank. It is also blank in my sent mail.
Carole,
If it talks about your password it is probably a scam.
Take a look in your purchase history and see if there has really been a purchase.
Also you can refer to this document: Identifying fraudulent "phishing" email -
How well does the Ipad2 work with the verizon 4g hotspot?
How well does the ipad2 work with the verizon 4g hotspot?
WoW Macbook Pro 2011 15" i7 2.3Ghz quad core AMD 6750 hi-res AG OSX gameplay with FPS and temps
MacBook Pro 17in. Review (Early 2011)
http://www.youtube.com/watch?v=hiEDf_l0PqY -
How to get online apps to work with the Verizon DSL modem firewall set at "Medium" level, not "Low?"
How to get online apps to work with the Verizon DSL modem firewall set at “Medium” level? Xbox 360 Live, FTP, and the Windows sntp Time checker native to Windows XP WON’T WORK unless the Verizon firewall is first reset down to “Low.” Then all works well, but I then risk low firewall protection. Setup: · Westell 6100 DSL modem (Software Version: VER:4.04.03.00 Transceiver Revision: 7.2.3.0 Model Name: C90-610015-06), · D-Link DIR-655 wireless router (Hardware Version: A3, Firmware Version: 1.21), For Xbox 360 Live the “canned” port forwarding rule for provided in Verizon’s drop-down list for the Westell 6100 modem forwards ports 88 and 3074 for both TCP and UDP. This does not meet Microsoft’s forwarding recommendations for Xbox 360 Live stated at http://support.microsoft.com/kb/908874. Instead, for the Verizon modem (Westell) I made a new port forwarding rule to comply with those Microsoft instructions. It forwards ports 53, 80 and 3074 for TCP and ports 53, 88 and 3074 for UDP. These same ports are also forwarded in the D-Link router configuration. For FTP, port 21 is also forwarded for TCP and UDP in both modem and router. But they don’t work until I first cripple the Verizon firewall down to “Low.” How to get them to work with the Verizon firewall up to Medium?
While I do not know the answer to your question, BUT since you have this modem and another router - you could just follow.
http://www.dslreports.com/faq/13600
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button. -
Menu Bar - Sound Volume icon does not move with the press of the F key
So I normally press the F keys to control the Sound Volume, right, just like everyone else does -
but the Sound Volume icon in the Menu Bar at the top right does not respond to the F key at all!
Isn't it supposed to react simultaneous with the press of the F key?
I have to actually use my mouse click to make that volume go up and down.
The actual volume does work with the F key, it goes up and down.
But to make the 2 work in sync, I have to point the mouse to the one at the Menu Bar, fiddle with it, and then I can use the F key and both work together at the same time.
If I haven't touched the Menu Bar one for a while and I only use the F key, the Menu Bar one doesn't move at all.
It's weird. Any ideas?I see what Al is seeing. Normally I just use one method or the other. The Volume Adjustment keys provide visual feedback, so it's unnecessary to check the menu extra, i.e. the Volume menu bar icon, to see the same feedback.
The slight delay in the reaction of the Volume menu extra, when open and while adjusting the volume with the Volume keys is normal.
They're independent methods for adjusting the Volume setting. The Volume menu extra takes a moment to refresh when the slider is displayed and you're changing the setting via the Volume keys.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X -
How to control volume in multi-room setup, with different tunes in each room?
Hi,
I'm thinking of replacing my Squeezebox / SqueezeServer setup and have therefore bought two Apple TV's to experiment with.
I have a Windows Home Server on which I've installed iTunes 10.5 yesterday and I can (through RDC) use it to share music to the Apple TVs and even control the volume.
However, playing music this way is by no means what I was hoping for - I want to be able to play DIFFERENT tunes in DIFFERENT rooms.
Yes, that is possible through the use of my iPhone, using Remote to choose the iTunes server (the real server in this case).
But, and here's my issue - when playing different tunes in different rooms (using the Remote app connected to my iTunes server), how do I control the VOLUME for each Apple TV? Or should I play the different tunes for different rooms in a different way?
Kind regards
NiclasThanks!
Yes I hope they develop either the Apple TV or Airport express or iTunes or all into a complete multi room music listening experience just like the Squeezebox / Sonos product range. They certainly have the possibility and they did try. Except they didn't make it all the way. It's fine to be able to play the same music in all rooms, but better still would be if I could play different music in different rooms AND change the volume without the need of an additional display or anything. The nice thing would be to have an airport express connected to a small amp with in-ceiling mounted speakers in e.g. the bathroom, the kids room etc. And the kids then control their own music, the bathroom has some rain forest sounds, but when I enter it, I change to the party music I was listening to in the living room, so as to get in the mood for tonights party... And when I'm ready in the bathroom, I switch back to the rain forest sound and one of the kids are so annoyed with the pumping bass from his brothers room, that he syncs to the same music, all the while I go into the kitchen and sync the kitchen with the living room and turn up the knob another notch or two.
This is the way my house works now and I can really see it work like that with Apples products, except they haven't done it all the way yet then. Too bad - I have only used the Apple TV's two days and started to like them. -
Control volume from Android to Android with Spotify Connect
Spotify Connect is great! Since some days ago we can control the Desktop App from our mobile phone or tablet, including volume control. What's still missing is volume control from Android to Android.
In this thread it is stated that this function already works, but I have several Android devices at home, and on none of these devices does volume control with Spotify Connect work. More people have this problem, see this thread. It does work from Android to PC, which is already great.
I've contacted Spotify Support, and they confirmed that volume control from mobile to mobile doesn't work at the moment.
So, the idea is:
Please implement volume control with Spotify Connect from Android to Android!I've been waiting for the volume control feature for a long time now. It is already supported by the Windows Desktop App. Why not on Android devices? I am using an Android TV box with the Spotify App as Spotify connect client. A great tool, but would be perfect with remote volume control. michel123 wrote:
Spotify Connect is great! Since some days ago we can control the Desktop App from our mobile phone or tablet, including volume control. What's still missing is volume control from Android to Android. In this thread it is stated that this function already works, but I have several Android devices at home, and on none of these devices does volume control with Spotify Connect work. More people have this problem, see this thread. It does work from Android to PC, which is already great. I've contacted Spotify Support, and they confirmed that volume control from mobile to mobile doesn't work at the moment. So, the idea is:Please implement volume control with Spotify Connect from Android to Android! -
How can I control a HP 33120A waveform generator with the serial port of my PC?
Hello,
I want to control a HP 33120A waveform generator with my PC using the serial port. I don't have any idea about how to do it. If you've done it or if you know how I can do it, please give me some indications.
Thanks
Jean-Baptiste Paillet
PS: I don`t have G PIB portThe answer to your cross-post in the LabVIEW General group seems to be right on the money:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000032200000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
Regards,
John Lum
National Instruments
Maybe you are looking for
-
HT4623 when will apple come out with the new update??
ever since they got the 6.1 my service for has gone down the drain ive had my iphone trade 2 times and it still has the same problem. it still keeps saying that i have 1 or 2 bars of service and most of the times it says NO SERVICE on the top right c
-
I am not able to see images in Facebook while i am connecting throw wifi
I am not able to see images in Facebook while i am connecting throw wifi
-
Include command line args in jar file
If I make and executable jar file, how can I make it so that when it runs certain comman line arguments are included
-
Mission Control icons are corrupted.
As you can see, icons in Mission Control seem to be corrupted in some way. Also when I adjust the volume, the icon and volume range sometimes appear in pink, or black, rather than white. In both cases, the volume and mission control, as they're about
-
Creative Cloud isn't recognizing my Photoshop needs an update to the CC 2014.2
Creative cloud isn't recognizing the latest update for photoshop. How can I update it?> thanks