Control what AnyConnect VPN clients can Access
Hello!
How do I ensure that my VPN users that are connected using AnyConnect VPN to my ASA5520 have the same access restrictions/permissions as those connected locally?
Assign a pool in the same vlan/subnet as those connected locally?
Any input helps. Thanks
Your annyconnect RA clients should have unique separate network from any other internal subnets and you will find much easier management and administration as soon as you start creating different RA tunnels for different purposes in future, at least this is my practice and find easy to administer and/or troubleshoot. If you decide using VPN tunnel network the same as an inside subnet you may encounter problems down the road which will be hard to troubleshoot.
Now you have VLAN10 subnet internally, if I understand correctly you want RA clients have the same access VLAN10 users have,my question to you is what type of access are you refering to? does VLAN10 users have access to certain internal networks or specific hosts and some don't? if this is so when you use vpn filters build the same access control you have defined for VLAN10 users, you don't necessarily have to create per user vpn filers but rather a group policy defining the permit access through the acl and apply it to the Annyconnect RA tunnel if the intend is for the whole tunnel group, just as shown in the RA vpn filter example link posted excluding the per user vpn filer.
Rgds
Jorge
Similar Messages
-
Vpn client can access internet but cannot access internal network
I am using PIX 501 to setup a VPN. At first the VPN client cannot access the internet once they logged in via the Cisco system vpn client, so i enable split tunneling. Now the VPN client can access the internet but they can't access the internal network.Due to the limited characters can be posted here, only necessary IOS coding is posted on the next message. Who knows how to solve this problem? Pls Help.....
enable password ********** encrypted
passwd ********** encrypted
hostname Firewall
domain-name aqswdefrgt.com.sg
access-list 100 permit ip 192.168.1.0 255.255.255.0 192.168.50.0 255.255.255.0
access-list nat permit tcp any host 65.165.123.142 eq smtp
access-list nat permit tcp any host 65.165.123.142 eq pop3
access-list nat permit tcp any host 65.165.123.143 eq smtp
access-list nat permit tcp any host 65.165.123.143 eq pop3
access-list nat permit tcp any host 65.165.123.143 eq www
access-list nat permit tcp any host 65.165.123.152 eq smtp
access-list nat permit tcp any host 65.165.123.152 eq pop3
access-list nat permit tcp any host 65.165.123.152 eq www
access-list nat permit tcp any host 65.165.123.143 eq https
access-list nat permit icmp any any
ip address outside 65.165.123.4 255.255.255.240
ip address inside 192.168.1.2 255.255.255.0
ip verify reverse-path interface outside
ip local pool clientpool 192.168.50.1-192.168.50.50
global (outside) 1 interface
nat (inside) 0 access-list 100
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp 65.165.123.142 smtp 192.168.1.56 smtp netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.142 pop3 192.168.1.56 pop3 netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 smtp 192.168.1.55 smtp netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 pop3 192.168.1.55 pop3 netmask 255.255.2
55.255 0 0
static (inside,outside) tcp 65.165.123.143 www 192.168.1.55 www netmask 255.255.255
.255 0 0
static (inside,outside) tcp 65.165.123.152 smtp 192.168.1.76 smtp netmask 255.255.
255.255 0 0
static (inside,outside) tcp 65.165.123.152 pop3 192.168.1.76 pop3 netmask 255.255.
255.255 0 0
static (inside,outside) tcp 65.165.123.152 www 192.168.1.76 www netmask 255.255.25
5.255 0 0
static (inside,outside) tcp 65.165.123.143 https 192.168.1.55 https netmask 255.255
.255.255 0 0
access-group nat in interface outside
route outside 0.0.0.0 0.0.0.0 65.165.123.1 1
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
aaa-server plexus protocol radius
aaa-server plexus (inside) host 192.168.1.55 ******** timeout 5
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map cisco 1 set transform-set myset
crypto map dyn-map 20 ipsec-isakmp dynamic cisco
crypto map dyn-map client authentication plexus
crypto map dyn-map interface outside
isakmp enable outside
isakmp key ******** address 0.0.0.0 netmask 0.0.0.0
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
isakmp policy 40 authentication pre-share
isakmp policy 40 encryption 3des
isakmp policy 40 hash md5
isakmp policy 40 group 2
isakmp policy 40 lifetime 86400
vpngroup vpn3000 address-pool clientpool
vpngroup vpn3000 dns-server 192.168.1.55
vpngroup vpn3000 wins-server 192.168.1.55
vpngroup vpn3000 default-domain aqswdefrgt.com.sg
vpngroup vpn3000 idle-time 1800
vpngroup vpn3000 password ********
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80 -
VPN clients can't see network resources unless Firewall is disabled.
If the firewall is turned off, connected VPN clients can access other PCs over the VPN. But I would like to enable a rule that allows them to access computers even with the firewall turned on. I just don't know what the rule should be.
Hi,
Any update? If you could update us at your convenience that would be wonderful.
Regards
Yolanda Zhu
TechNet Community Support -
VPN Clients can't access DMZ Network
Hello,
I will try to describe my problem as best as possible. The title says VPN clients cannot access DMZ network, but that is not exactly the problem, the situation is this, a group of users are using an actual 10.x network where they have their servers and pretty much everything. The users must be relocated into a new network, the 172.16.x. In a point in time they will not have to use 10.x anymore, but meanwhile, they need access to that network.
I have an ASA 5510 as default gateway for the new network (172.16.x.x), one interface e0/0 connected to the outside (internet), interface e0/1 to the inside and other interface connected to the actual 10.x (which I call DMZ), so basically I am using the ASA as a bridge using NAT to grant access to the users in the network 172.16.x to the resources in the 10.x network while the migration is completed.
All the users must use the path to the internet thru the ASA using the NAT overload to the outside interface and I put in place a NAT policy to 10.x to allow access to the 10.x network only when the internal users 172.16.x try to reach that path and so far, everything is working just fine for the internal users.
Now for some reason, when I do VPN, the VPN clients cannot reach the 10.x network, even when they are supposed to be in the internal network (because they are doing VPN right?) .
I have enabled split tunneling with NAT exempt the 172.16 network and I am not sure if that is causing the problem, because when I trace from my PC the 172.16.16.1 address using the VPN I get the proper route path, but when I try to reach 10.x, my PC is using its default gateway and not the VPN gateway which has a route to 10.x.
I’m not even sure if what I am trying to do is possible, I want VPN users to be able to access a 10.x network using NAT overload with the Interface of the ASA plugged to the 10.x network, just like the internal users are doing right now.
Any help or advice will be highly appreciated.Allow clients to access DMZ, add exempt NAT rule, add both the "same-security-traffic" thru cli. Please give it a try.
Sent from Cisco Technical Support iPad App -
AnyConnect VPN Clients IP Address access rules
I setup ASA5540 for SSL-VPN (clientless) works fine.
But I try to use Client (AnyConnect) to access internal resources, it is failed. It is stiil initiate sessions from remote client IP.
I need to initiate session from client IP assigned by ASA5540 box (same with Cisco VPN client connect to Cat65 SVC module).
How I setup it?I use Cisco VPN client (remote access VPN)to connect ASA.
There is a configuration setup for group authentication/w password on Cisco VPN client.I do not know to setup on ASA to match this?
Second, remote client connect ASA, I should get the client IP address which I setup on ASA.
It should use this IP to connect ASA internal net,but I failed.( Both Cisco VPN and AnyConnect)
How I setup this ( SSL VPN on this ASA works). -
VPN Clients can't access internal LAN
Hello - I have seen a few other threads on this issue, but can't seem to fix mine. I have a PIX 506e. My VPN clients can connect, they get a DHCP address from our internal server no problem. But the clients can not ping me or anything else on the LAN. The clients are connecting ipsec. I know I must be missing something simple here. Here is my config. Any help would be great
Change the VPN Pool address to something else for example 192.168.10.0/24 etc. Then try and let me know. There could be ip overlap here.
-
VPN client cannot access inside hosts
Hello,
I have an ASA 5505 device with the attached configuration and my vpn clients can connect to it fine. Although, once a vpn client is connected they cannot RDP, ping, or telnet any internal hosts. The goal is to have a connected vpn client to have all access rights as anyone sitting on the internal network. Any assistance is greatly appreciated.
: Saved
ASA Version 7.2(3)
hostname Kappa-GW01
domain-name Kappa.com
enable password xxxxxxxxx encrypted
names
name 172.20.42.42 UMEFTP2 description UMAP FTP2
name 172.20.40.246 UMEMAIL1 description Exchange Server
name 172.20.41.3 UMERPS
name x.x.81.81 Wilkes
name x.x.84.41 KappaPittston
dns-guard
interface Ethernet0/0
shutdown
nameif outside
security-level 0
ip address x.x.148.194 255.255.255.248
interface Ethernet0/1
nameif Outside_Windstream
security-level 0
ip address x.x.205.210 255.255.255.240
interface Ethernet0/2
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
passwd 7Tpgc2AiWGxbNjkj encrypted
boot system disk0:/asa723-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name Kappa.com
object-group network Blue_Bell_Internal_Networks
description Blue Bell internal network Group
network-object 192.168.100.0 255.255.255.0
network-object 10.0.0.0 255.255.255.0
network-object 10.0.1.0 255.255.255.0
network-object 10.0.2.0 255.255.255.0
object-group network VPN-Sites
network-object host Wilkes
network-object host KappaPittston
object-group network Michigan_VPN_GRP
network-object 172.20.40.0 255.255.252.0
object-group network ASA_OutSide_Vendors
description ASA OutSide Vendor Access
access-list 101 extended permit ip 10.0.0.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list 101 extended permit ip 10.0.1.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list 101 extended permit ip 10.0.2.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list 101 extended permit ip 172.20.40.0 255.255.252.0 192.168.100.0 255.255.255.0
access-list KappaVPN_splitTunnelAcl remark Blue Bell Office
access-list KappaVPN_splitTunnelAcl standard permit 10.0.0.0 255.255.255.0
access-list KappaVPN_splitTunnelAcl remark Williamston Office
access-list KappaVPN_splitTunnelAcl standard permit 172.20.40.0 255.255.252.0
access-list KappaVPN_splitTunnelAcl remark Pittston Office
access-list KappaVPN_splitTunnelAcl standard permit 10.0.10.0 255.255.255.0
access-list KappaVPN_splitTunnelAcl standard permit 10.0.2.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 10.0.2.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 10.0.10.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 10.0.30.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.0.0 255.255.255.0 172.20.40.0 255.255.252.0 inactive
access-list inside_nat0_outbound extended permit ip 10.0.2.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.10.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 10.0.30.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 172.20.40.0 255.255.252.0 192.168.100.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 172.20.40.0 255.255.252.0 10.0.30.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 172.20.40.0 255.255.252.0 10.0.10.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 172.20.40.0 255.255.252.0 10.0.2.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip any 192.168.100.0 255.255.255.0
access-list outside_2_cryptomap extended permit ip 10.0.0.0 255.255.255.0 172.20.48.0 255.255.252.0
access-list umeemp_splitTunnelAcl standard permit 10.0.0.0 255.255.255.0
access-list umeemp_splitTunnelAcl standard permit 172.20.40.0 255.255.252.0
access-list umeemp_splitTunnelAcl standard permit 10.0.30.0 255.255.255.0
access-list umeemp_splitTunnelAcl standard permit 10.0.2.0 255.255.255.0
access-list outside_5_cryptomap extended permit ip 10.0.0.0 255.255.255.0 10.0.10.0 255.255.255.0
access-list inside_access_in extended permit ip any any
access-list 102 extended permit tcp any any eq 2000
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.220 eq smtp
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.220 eq pop3 inactive
access-list Outside_Winstream_access_in extended permit udp object-group VPN-Sites interface Outside_Windstream eq isakmp
access-list Outside_Winstream_access_in extended permit tcp object-group ASA_OutSide_Vendors host x.x.205.217 eq 4080
access-list Outside_Winstream_access_in remark SMTP Access
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.218 eq smtp
access-list Outside_Winstream_access_in remark POP access
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.218 eq pop3
access-list Outside_Winstream_access_in remark OWA Access
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.218 eq https
access-list Outside_Winstream_access_in extended permit tcp host x.x.87.65 host x.x.205.218 eq 3389
access-list Outside_Winstream_access_in extended permit udp host x.x.56.111 eq ntp host x.x.205.216 eq ntp
access-list Outside_Winstream_access_in remark OWA UMAP
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.211 eq https
access-list Outside_Winstream_access_in remark JLAN
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.215 eq https
access-list Outside_Winstream_access_in remark UMERPS
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.212 eq https
access-list Outside_Winstream_access_in remark UMERPS
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.212 eq ssh
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.213 eq https
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.213 eq 5494
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.214 eq www
access-list Outside_Winstream_access_in extended permit tcp any host x.x.205.211 eq 8081
access-list Outside_Winstream_access_in extended permit icmp any any echo
access-list outside_6_cryptomap extended permit ip 10.0.0.0 255.255.255.0 10.0.2.0 255.255.255.0
access-list outside_6_cryptomap extended permit ip 172.20.40.0 255.255.255.0 10.0.2.0 255.255.255.0
access-list Outside_Windstream_cryptomap_11 extended permit ip 172.20.40.0 255.255.255.0 10.0.2.0 255.255.255.0
access-list Outside_Windstream_cryptomap_10 extended permit ip 10.0.0.0 255.255.255.0 10.0.2.0 255.255.255.0
access-list Outside_Windstream_cryptomap_5 extended permit ip 10.0.0.0 255.255.255.0 10.0.10.0 255.255.255.0
access-list Outside_Windstream_cryptomap_12 extended permit ip 172.20.40.0 255.255.255.0 10.0.2.0 255.255.255.0
access-list Outside_Windstream_2_cryptomap extended permit ip 10.0.0.0 255.255.255.0 172.20.48.0 255.255.252.0
access-list nonat extended permit ip any any inactive
pager lines 24
logging enable
logging asdm debugging
logging flash-bufferwrap
mtu outside 1500
mtu Outside_Windstream 1500
mtu inside 1500
mtu management 1500
ip local pool vpn-pool 192.168.100.100-192.168.100.200
no failover
monitor-interface outside
monitor-interface Outside_Windstream
monitor-interface inside
monitor-interface management
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-523.bin
no asdm history enable
arp timeout 14400
nat-control
global (Outside_Windstream) 1 x.x.205.216 netmask 255.0.0.0
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 172.20.40.0 255.255.252.0
nat (inside) 1 10.0.0.0 255.255.0.0
static (inside,Outside_Windstream) x.x.205.217 10.0.0.20 netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.220 10.0.0.21 netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.218 10.0.0.15 netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.215 172.20.40.145 netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.211 UMEMAIL1 netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.212 UMERPS netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.213 172.20.40.243 netmask 255.255.255.255
static (inside,Outside_Windstream) x.x.205.214 172.20.40.146 netmask 255.255.255.255
access-group acl_inbound in interface outside
access-group Outside_Winstream_access_in in interface Outside_Windstream
route Outside_Windstream 0.0.0.0 0.0.0.0 x.x.205.209 1
route inside 172.20.40.0 255.255.252.0 10.0.0.3 1
route inside 10.0.30.0 255.255.255.0 10.0.0.254 1
route inside 10.0.1.0 255.255.255.0 10.0.0.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
aaa-server BBPA-SRV-DC01 protocol radius
aaa-server BBPA-SRV-DC01 host 10.0.0.15
timeout 5
key G6G7#02bj!
aaa-server UMAP protocol radius
aaa-server UMAP host 172.20.40.245
timeout 5
key gfrt1a
aaa-server UMAP host 172.20.40.244
timeout 5
key gfrt1a
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
aaa authentication telnet console LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
http 10.0.0.15 255.255.255.255 inside
http 192.168.1.0 255.255.255.0 management
http 192.168.100.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map Outside_Windstream_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map Outside_Windstream_dyn_map 40 set pfs
crypto dynamic-map Outside_Windstream_dyn_map 40 set transform-set ESP-3DES-SHA
crypto map outside_map 5 match address outside_5_cryptomap
crypto map outside_map 5 set peer Wilkes
crypto map outside_map 5 set transform-set ESP-3DES-SHA
crypto map outside_map 10 match address outside_6_cryptomap
crypto map outside_map 10 set peer KappaPittston
crypto map outside_map 10 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto map Outside_Windstream_map 5 match address Outside_Windstream_cryptomap_5
crypto map Outside_Windstream_map 5 set peer Wilkes
crypto map Outside_Windstream_map 5 set transform-set ESP-3DES-SHA
crypto map Outside_Windstream_map 10 match address Outside_Windstream_cryptomap_10
crypto map Outside_Windstream_map 10 set peer KappaPittston
crypto map Outside_Windstream_map 10 set transform-set ESP-3DES-SHA
crypto map Outside_Windstream_map 65535 ipsec-isakmp dynamic Outside_Windstream_dyn_map
crypto map Outside_Windstream_map interface Outside_Windstream
crypto isakmp enable Outside_Windstream
crypto isakmp policy 5
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 3600
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption des
hash md5
group 2
lifetime 86400
crypto isakmp nat-traversal 20
telnet 10.0.0.0 255.255.0.0 inside
telnet timeout 5
ssh 10.0.0.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
management-access inside
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns migrated_dns_map_1
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ftp
inspect skinny
inspect pptp
service-policy global_policy global
webvpn
enable Outside_Windstream
svc image disk0:/sslclient-win-1.1.4.177.pkg 1
svc enable
group-policy DfltGrpPolicy attributes
banner none
wins-server none
dns-server none
dhcp-network-scope none
vpn-access-hours none
vpn-simultaneous-logins 3
vpn-idle-timeout 30
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec l2tp-ipsec webvpn
password-storage disable
ip-comp disable
re-xauth disable
group-lock none
pfs disable
ipsec-udp disable
ipsec-udp-port 10000
split-tunnel-policy tunnelspecified
split-tunnel-network-list none
default-domain none
split-dns none
intercept-dhcp 255.255.255.255 disable
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout 30
ip-phone-bypass disable
leap-bypass disable
nem disable
backup-servers keep-client-config
msie-proxy server none
msie-proxy method no-modify
msie-proxy except-list none
msie-proxy local-bypass disable
nac disable
nac-sq-period 300
nac-reval-period 36000
nac-default-acl none
address-pools none
smartcard-removal-disconnect enable
client-firewall none
client-access-rule none
webvpn
functions url-entry
html-content-filter none
homepage none
keep-alive-ignore 4
http-comp gzip
filter none
url-list none
customization value DfltCustomization
port-forward none
port-forward-name value Application Access
sso-server none
deny-message value Login was successful, but because certain criteria have not been met or due to some specific group policy, you do not have permission to use any of the VPN features. Contact your IT administrator for more information
svc required
svc keep-installer installed
svc keepalive none
svc rekey time none
svc rekey method none
svc dpd-interval client none
svc dpd-interval gateway none
svc compression deflate
group-policy umeemp internal
group-policy umeemp attributes
dns-server value 172.20.40.245
vpn-filter none
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value KappaVPN_splitTunnelAcl
default-domain value umapinc.com
group-policy KappaVPN internal
group-policy KappaVPN attributes
wins-server value 10.0.0.15
dns-server value 10.0.0.15
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value umeemp_splitTunnelAcl
default-domain value kappa.loc
username gwadmin password AVjtEPq7nvtiAAk0 encrypted
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool vpn-pool
authentication-server-group BBPA-SRV-DC01
authorization-required
tunnel-group KappaVPN type ipsec-ra
tunnel-group KappaVPN general-attributes
address-pool vpn-pool
authentication-server-group BBPA-SRV-DC01
default-group-policy KappaVPN
tunnel-group KappaVPN ipsec-attributes
pre-shared-key *
tunnel-group x.x.131.62 type ipsec-l2l
tunnel-group x.x.131.62 ipsec-attributes
pre-shared-key *
tunnel-group x.x.232.2 type ipsec-l2l
tunnel-group x.x.232.2 ipsec-attributes
pre-shared-key *
tunnel-group x.x.49.114 type ipsec-l2l
tunnel-group x.x.49.114 ipsec-attributes
pre-shared-key *
tunnel-group x.x.226.218 type ipsec-l2l
tunnel-group x.x.226.218 ipsec-attributes
pre-shared-key *
tunnel-group x.x.116.133 type ipsec-l2l
tunnel-group x.x.116.133 ipsec-attributes
pre-shared-key *
tunnel-group x.x.21.36 type ipsec-l2l
tunnel-group x.x.21.36 ipsec-attributes
pre-shared-key *
tunnel-group umeemp type ipsec-ra
tunnel-group umeemp general-attributes
address-pool vpn-pool
authentication-server-group UMAP
default-group-policy umeemp
tunnel-group umeemp ipsec-attributes
pre-shared-key *
tunnel-group x.x.81.81 type ipsec-l2l
tunnel-group x.x.81.81 ipsec-attributes
pre-shared-key *
tunnel-group x.x.84.41 type ipsec-l2l
tunnel-group x.x.84.41 ipsec-attributes
pre-shared-key *
prompt hostname context
Cryptochecksum:xxxxxxxxxxxxxxxxxxxxx
: end
asdm image disk0:/asdm-523.bin
no asdm history enableI'm sorry, I misunderstood what you were asking. Yes those three networks are on the inside of our ASA. we have 2 outside of the ASA (10.0.2.x, 10.0.10.x). When our clients vpn they connect to the x.x.205.210 ip address, which maps them depending on the preshared key that puts them on either the kappaVPN or the umeempVPN. (I am kind of new to configuring the ASA). When the cisco vpn client connects to the network, I checked the statistics and it lists all of our LAN networks under secure routes. I cannot ping anything inside the LAN nor can I connect RDP, telnet or anything.
Hope this answers your questions, just let me know if you need any more information.
-Rudy -
VPN Clients cannot access remote site
Hey there,
I am pretty new in configuring Cisco devices and now I need some help.
I have 2 site here:
site A
Cisco 891
external IP: 195.xxx.yyy.zzz
VPN Gateway for Remote users
local IP: VLAN10 10.133.10.0 /23
site B
Cisco 891
external IP: 62.xxx.yyy.zzz
local IP VLAN10 10.133.34.0 /23
Those two sites are linked together with a Site-to-Site VPN. Accessing files or ressources from one site to the other is working fine while connected to the local LAN.
I configured VPN connection with Radius auth. VPN clients can connect to Site A, get an IP adress from VPN Pool (172.16.100.2-100) and can access files and servers on site A. But for some reason they cannot access ressources on site B. I already added the site B network to the ACL and when connecting with VPN it shows secured routes to 10.133.10.0 and 10.133.34.0 in the statistics. Same thing for other VPN Tunnels to ERP system.
What is missing here to make it possible to reach remote sites when connected through VPN? I had a look at the logs but could not find anything important.
Here is the config of site A
Building configuration...
Current configuration : 24257 bytes
version 15.2
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname Englerstrasse
boot-start-marker
boot config usbflash0:CVO-BOOT.CFG
boot-end-marker
aaa new-model
aaa group server radius Radius-AD
server 10.133.10.5 auth-port 1812 acct-port 1813
aaa authentication login default local
aaa authentication login ciscocp_vpn_xauth_ml_2 group Radius-AD local
aaa authorization exec default local
aaa authorization network ciscocp_vpn_group_ml_2 local
aaa session-id common
clock timezone Berlin 1 0
clock summer-time Berlin date Mar 30 2003 2:00 Oct 26 2003 3:00
crypto pki trustpoint TP-self-signed-27361994
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-27361994
revocation-check none
rsakeypair TP-self-signed-27361994
crypto pki trustpoint test_trustpoint_config_created_for_sdm
subject-name [email protected]
revocation-check crl
crypto pki certificate chain TP-self-signed-27361994
certificate self-signed 01
30820227 30820190 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
2F312D30 2B060355 04031324 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 32373336 31393934 301E170D 31323038 32373038 30343238
5A170D32 30303130 31303030 3030305A 302F312D 302B0603 55040313 24494F53
2D53656C 662D5369 676E6564 2D436572 74696669 63617465 2D323733 36313939
3430819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281 8100B709
64CE1874 BF812A9F 0B761522 892373B9 10F0BB52 6263DCDB F9877AA3 7BD34E53
BCFDA45C 2A991777 4DDC7E6B 1FCEE36C B6E35679 C4A18771 9C0F871F 38310234
2D89A4FF 37B616D8 362B3103 A8A319F2 10A72DC7 490A04AC 7955DF68 32EF9615
9E1A3B31 2A1AB243 B3ED3E35 F4AAD029 CDB1F941 5E794300 5C5EF8AE 5C890203
010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603 551D2304
18301680 14D0F5E7 D3A9311D 1675AA8F 38F064FC 4D04465E F5301D06 03551D0E
04160414 D0F5E7D3 A9311D16 75AA8F38 F064FC4D 04465EF5 300D0609 2A864886
F70D0101 05050003 818100AB 2CD4363A E5ADBFB0 943A38CB AC820801 117B52CC
20216093 79D1F777 2B3C0062 4301CF73 094B9CA5 805F585E 04CF3301 9B839DEB
14A334A2 F5A5316F C65EEF21 0B0DF3B5 F4322440 F28B984B E769876D 6EF94895
C3D5048A A4E2A180 12DF6652 176942F8 58187D7B D37B1F1A 4DDD7AE9 5189F9AF
AF3EF676 26AD3F31 D368F5
quit
crypto pki certificate chain test_trustpoint_config_created_for_sdm
no ip source-route
ip auth-proxy max-login-attempts 5
ip admission max-login-attempts 5
no ip bootp server
no ip domain lookup
ip domain name yourdomain.com
ip inspect log drop-pkt
ip inspect name CCP_MEDIUM appfw CCP_MEDIUM
ip inspect name CCP_MEDIUM ftp
ip inspect name CCP_MEDIUM h323
ip inspect name CCP_MEDIUM sip
ip inspect name CCP_MEDIUM https
ip inspect name CCP_MEDIUM icmp
ip inspect name CCP_MEDIUM netshow
ip inspect name CCP_MEDIUM rcmd
ip inspect name CCP_MEDIUM realaudio
ip inspect name CCP_MEDIUM rtsp
ip inspect name CCP_MEDIUM sqlnet
ip inspect name CCP_MEDIUM streamworks
ip inspect name CCP_MEDIUM tftp
ip inspect name CCP_MEDIUM udp
ip inspect name CCP_MEDIUM vdolive
ip inspect name CCP_MEDIUM imap reset
ip inspect name CCP_MEDIUM smtp
ip cef
no ipv6 cef
appfw policy-name CCP_MEDIUM
application im aol
service default action allow alarm
service text-chat action allow alarm
server permit name login.oscar.aol.com
server permit name toc.oscar.aol.com
server permit name oam-d09a.blue.aol.com
audit-trail on
application im msn
service default action allow alarm
service text-chat action allow alarm
server permit name messenger.hotmail.com
server permit name gateway.messenger.hotmail.com
server permit name webmessenger.msn.com
audit-trail on
application http
strict-http action allow alarm
port-misuse im action reset alarm
port-misuse p2p action reset alarm
port-misuse tunneling action allow alarm
application im yahoo
service default action allow alarm
service text-chat action allow alarm
server permit name scs.msg.yahoo.com
server permit name scsa.msg.yahoo.com
server permit name scsb.msg.yahoo.com
server permit name scsc.msg.yahoo.com
server permit name scsd.msg.yahoo.com
server permit name cs16.msg.dcn.yahoo.com
server permit name cs19.msg.dcn.yahoo.com
server permit name cs42.msg.dcn.yahoo.com
server permit name cs53.msg.dcn.yahoo.com
server permit name cs54.msg.dcn.yahoo.com
server permit name ads1.vip.scd.yahoo.com
server permit name radio1.launch.vip.dal.yahoo.com
server permit name in1.msg.vip.re2.yahoo.com
server permit name data1.my.vip.sc5.yahoo.com
server permit name address1.pim.vip.mud.yahoo.com
server permit name edit.messenger.yahoo.com
server permit name messenger.yahoo.com
server permit name http.pager.yahoo.com
server permit name privacy.yahoo.com
server permit name csa.yahoo.com
server permit name csb.yahoo.com
server permit name csc.yahoo.com
audit-trail on
parameter-map type inspect global
log dropped-packets enable
multilink bundle-name authenticated
redundancy
ip tcp synwait-time 10
class-map match-any CCP-Transactional-1
match dscp af21
match dscp af22
match dscp af23
class-map match-any CCP-Voice-1
match dscp ef
class-map match-any sdm_p2p_kazaa
match protocol fasttrack
match protocol kazaa2
class-map match-any CCP-Routing-1
match dscp cs6
class-map match-any sdm_p2p_edonkey
match protocol edonkey
class-map match-any CCP-Signaling-1
match dscp cs3
match dscp af31
class-map match-any sdm_p2p_gnutella
match protocol gnutella
class-map match-any CCP-Management-1
match dscp cs2
class-map match-any sdm_p2p_bittorrent
match protocol bittorrent
policy-map sdm-qos-test-123
class class-default
policy-map sdmappfwp2p_CCP_MEDIUM
class sdm_p2p_edonkey
class sdm_p2p_gnutella
class sdm_p2p_kazaa
class sdm_p2p_bittorrent
policy-map CCP-QoS-Policy-1
class sdm_p2p_edonkey
class sdm_p2p_gnutella
class sdm_p2p_kazaa
class sdm_p2p_bittorrent
class CCP-Voice-1
priority percent 33
class CCP-Signaling-1
bandwidth percent 5
class CCP-Routing-1
bandwidth percent 5
class CCP-Management-1
bandwidth percent 5
class CCP-Transactional-1
bandwidth percent 5
class class-default
fair-queue
random-detect
crypto ctcp port 10000
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp key REMOVED address 62.20.xxx.yyy
crypto isakmp key REMOVED address 195.243.xxx.yyy
crypto isakmp key REMOVED address 195.243.xxx.yyy
crypto isakmp key REMOVED address 83.140.xxx.yyy
crypto isakmp client configuration group VPN_local
key REMOVED
dns 10.133.10.5 10.133.10.7
wins 10.133.10.7
domain domain.de
pool SDM_POOL_2
acl 115
crypto isakmp profile ciscocp-ike-profile-1
match identity group VPN_local
client authentication list ciscocp_vpn_xauth_ml_2
isakmp authorization list ciscocp_vpn_group_ml_2
client configuration address respond
virtual-template 1
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA1 esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA2 esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA3 esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA4 esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA11 esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA5 esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-DES-SHA1 esp-des esp-sha-hmac
crypto ipsec profile CiscoCP_Profile1
set transform-set ESP-3DES-SHA11
set isakmp-profile ciscocp-ike-profile-1
crypto map SDM_CMAP_1 1 ipsec-isakmp
description Tunnel to62.20.xxx.xxx
set peer 62.20.xxx.xxx
set transform-set ESP-3DES-SHA
match address 105
crypto map SDM_CMAP_1 2 ipsec-isakmp
description Tunnel to195.243.xxx.xxx
set peer 195.243.xxx.xxx
set transform-set ESP-3DES-SHA4
match address 107
crypto map SDM_CMAP_1 3 ipsec-isakmp
description Tunnel to83.140.xxx.xxx
set peer 83.140.xxx.xxx
set transform-set ESP-DES-SHA1
match address 118
interface Loopback2
ip address 192.168.10.1 255.255.254.0
interface Null0
no ip unreachables
interface FastEthernet0
switchport mode trunk
no ip address
spanning-tree portfast
interface FastEthernet1
no ip address
spanning-tree portfast
interface FastEthernet2
no ip address
spanning-tree portfast
interface FastEthernet3
no ip address
spanning-tree portfast
interface FastEthernet4
description Internal LAN
switchport access vlan 10
switchport trunk native vlan 10
no ip address
spanning-tree portfast
interface FastEthernet5
no ip address
spanning-tree portfast
interface FastEthernet6
no ip address
spanning-tree portfast
interface FastEthernet7
no ip address
spanning-tree portfast
interface FastEthernet8
description $FW_OUTSIDE$$ETH-WAN$
ip address 62.153.xxx.xxx 255.255.255.248
ip access-group 113 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip inspect CCP_MEDIUM out
no ip virtual-reassembly in
ip verify unicast reverse-path
duplex auto
speed auto
crypto map SDM_CMAP_1
service-policy input sdmappfwp2p_CCP_MEDIUM
service-policy output CCP-QoS-Policy-1
interface Virtual-Template1 type tunnel
ip unnumbered FastEthernet8
tunnel mode ipsec ipv4
tunnel protection ipsec profile CiscoCP_Profile1
interface GigabitEthernet0
no ip address
shutdown
duplex auto
speed auto
interface Vlan1
no ip address
interface Vlan10
description $FW_INSIDE$
ip address 10.133.10.1 255.255.254.0
ip access-group 112 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly in
interface Async1
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
encapsulation slip
ip local pool SDM_POOL_1 192.168.10.101 192.168.10.200
ip local pool VPN_Pool 192.168.20.2 192.168.20.100
ip local pool SDM_POOL_2 172.16.100.2 172.16.100.100
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip forward-protocol nd
ip nat inside source route-map SDM_RMAP_1 interface FastEthernet8 overload
ip route 0.0.0.0 0.0.0.0 62.153.xxx.xxx
ip access-list extended VPN1
remark VPN_Haberstrasse
remark CCP_ACL Category=4
permit ip 10.133.10.0 0.0.1.255 10.133.34.0 0.0.1.255
ip radius source-interface Vlan10
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 10.10.10.0 0.0.0.7
access-list 23 remark CCP_ACL Category=17
access-list 23 permit 195.243.xxx.xxx
access-list 23 permit 10.133.10.0 0.0.1.255
access-list 23 permit 10.10.10.0 0.0.0.7
access-list 100 remark CCP_ACL Category=4
access-list 100 permit ip 10.133.10.0 0.0.1.255 any
access-list 101 remark CCP_ACL Category=16
access-list 101 permit udp any eq bootps any eq bootpc
access-list 101 deny ip 10.10.10.0 0.0.0.255 any
access-list 101 permit icmp any any echo-reply
access-list 101 permit icmp any any time-exceeded
access-list 101 permit icmp any any unreachable
access-list 101 deny ip 10.0.0.0 0.255.255.255 any
access-list 101 deny ip 172.16.0.0 0.15.255.255 any
access-list 101 deny ip 192.168.0.0 0.0.255.255 any
access-list 101 deny ip 127.0.0.0 0.255.255.255 any
access-list 101 deny ip host 255.255.255.255 any
access-list 101 deny ip any any
access-list 102 remark auto generated by CCP firewall configuration
access-list 102 remark CCP_ACL Category=1
access-list 102 deny ip 10.10.10.0 0.0.0.7 any
access-list 102 permit icmp any host 62.153.xxx.xxx echo-reply
access-list 102 permit icmp any host 62.153.xxx.xxx time-exceeded
access-list 102 permit icmp any host 62.153.xxx.xxx unreachable
access-list 102 deny ip 10.0.0.0 0.255.255.255 any
access-list 102 deny ip 172.16.0.0 0.15.255.255 any
access-list 102 deny ip 192.168.0.0 0.0.255.255 any
access-list 102 deny ip 127.0.0.0 0.255.255.255 any
access-list 102 deny ip host 255.255.255.255 any
access-list 102 deny ip host 0.0.0.0 any
access-list 102 deny ip any any log
access-list 103 remark auto generated by CCP firewall configuration
access-list 103 remark CCP_ACL Category=1
access-list 103 remark IPSec Rule
access-list 103 permit ip 10.133.34.0 0.0.1.255 10.133.10.0 0.0.1.255
access-list 103 remark IPSec Rule
access-list 103 permit ip 10.133.34.0 0.0.1.255 192.168.10.0 0.0.1.255
access-list 103 permit udp host 195.243.xxx.xxx host 62.153.xxx.xxx eq non500-isakmp
access-list 103 permit udp host 195.243.xxx.xxx host 62.153.xxx.xxx eq isakmp
access-list 103 permit esp host 195.243.xxx.xxx host 62.153.xxx.xxx
access-list 103 permit ahp host 195.243.xxx.xxx host 62.153.xxx.xxx
access-list 103 remark IPSec Rule
access-list 103 permit ip 10.133.20.0 0.0.0.255 10.133.10.0 0.0.1.255
access-list 103 remark IPSec Rule
access-list 103 permit ip 192.168.10.0 0.0.1.255 10.133.10.0 0.0.1.255
access-list 103 permit udp host 62.20.xxx.xxx host 62.153.xxx.xxx eq non500-isakmp
access-list 103 permit udp host 62.20.xxx.xxx host 62.153.xxx.xxx eq isakmp
access-list 103 permit esp host 62.20.xxx.xxx host 62.153.xxx.xxx
access-list 103 permit ahp host 62.20.xxx.xxx host 62.153.xxx.xxx
access-list 103 permit udp any host 62.153.xxx.xxx eq non500-isakmp
access-list 103 permit udp any host 62.153.xxx.xxx eq isakmp
access-list 103 permit esp any host 62.153.xxx.xxx
access-list 103 permit ahp any host 62.153.xxx.xxx
access-list 103 permit udp host 194.25.0.60 eq domain any
access-list 103 permit udp host 194.25.0.68 eq domain any
access-list 103 permit udp host 194.25.0.68 eq domain host 62.153.xxx.xxx
access-list 103 deny ip 10.10.10.0 0.0.0.7 any
access-list 103 permit icmp any host 62.153.xxx.xxx echo-reply
access-list 103 permit icmp any host 62.153.xxx.xxx time-exceeded
access-list 103 permit icmp any host 62.153.xxx.xxx unreachable
access-list 103 deny ip 10.0.0.0 0.255.255.255 any
access-list 103 deny ip 172.16.0.0 0.15.255.255 any
access-list 103 deny ip 192.168.0.0 0.0.255.255 any
access-list 103 deny ip 127.0.0.0 0.255.255.255 any
access-list 103 deny ip host 255.255.255.255 any
access-list 103 deny ip host 0.0.0.0 any
access-list 103 deny ip any any log
access-list 104 remark CCP_ACL Category=4
access-list 104 permit ip 10.133.10.0 0.0.1.255 any
access-list 105 remark CCP_ACL Category=4
access-list 105 remark IPSec Rule
access-list 105 permit ip 10.133.10.0 0.0.1.255 10.133.20.0 0.0.0.255
access-list 106 remark CCP_ACL Category=2
access-list 106 remark IPSec Rule
access-list 106 deny ip 192.168.10.0 0.0.1.255 10.133.34.0 0.0.1.255
access-list 106 remark IPSec Rule
access-list 106 deny ip 192.168.10.0 0.0.1.255 10.60.16.0 0.0.0.255
access-list 106 remark IPSec Rule
access-list 106 deny ip 10.133.10.0 0.0.1.255 10.60.16.0 0.0.0.255
access-list 106 remark IPSec Rule
access-list 106 deny ip 10.133.10.0 0.0.1.255 10.133.34.0 0.0.1.255
access-list 106 remark IPSec Rule
access-list 106 deny ip 10.133.10.0 0.0.1.255 10.133.20.0 0.0.0.255
access-list 106 permit ip 10.10.10.0 0.0.0.7 any
access-list 106 permit ip 10.133.10.0 0.0.1.255 any
access-list 107 remark CCP_ACL Category=4
access-list 107 remark IPSec Rule
access-list 107 permit ip 10.133.10.0 0.0.1.255 10.133.34.0 0.0.1.255
access-list 107 remark IPSec Rule
access-list 107 permit ip 192.168.10.0 0.0.1.255 10.133.34.0 0.0.1.255
access-list 108 remark Auto generated by SDM Management Access feature
access-list 108 remark CCP_ACL Category=1
access-list 108 permit tcp 10.133.10.0 0.0.1.255 host 10.133.10.1 eq telnet
access-list 108 permit tcp 10.133.10.0 0.0.1.255 host 10.133.10.1 eq 22
access-list 108 permit tcp 10.133.10.0 0.0.1.255 host 10.133.10.1 eq www
access-list 108 permit tcp 10.133.10.0 0.0.1.255 host 10.133.10.1 eq 443
access-list 108 permit tcp 10.133.10.0 0.0.1.255 host 10.133.10.1 eq cmd
access-list 108 deny tcp any host 10.133.10.1 eq telnet
access-list 108 deny tcp any host 10.133.10.1 eq 22
access-list 108 deny tcp any host 10.133.10.1 eq www
access-list 108 deny tcp any host 10.133.10.1 eq 443
access-list 108 deny tcp any host 10.133.10.1 eq cmd
access-list 108 deny udp any host 10.133.10.1 eq snmp
access-list 108 permit ip any any
access-list 109 remark CCP_ACL Category=1
access-list 109 permit ip 10.133.10.0 0.0.1.255 any
access-list 109 permit ip 10.10.10.0 0.0.0.7 any
access-list 109 permit ip 192.168.10.0 0.0.1.255 any
access-list 110 remark CCP_ACL Category=1
access-list 110 permit ip host 195.243.xxx.xxx any
access-list 110 permit ip host 84.44.xxx.xxx any
access-list 110 permit ip 10.133.10.0 0.0.1.255 any
access-list 110 permit ip 10.10.10.0 0.0.0.7 any
access-list 110 permit ip 192.168.10.0 0.0.1.255 any
access-list 111 remark CCP_ACL Category=4
access-list 111 permit ip 10.133.10.0 0.0.1.255 any
access-list 112 remark CCP_ACL Category=1
access-list 112 permit udp host 10.133.10.5 eq 1812 any
access-list 112 permit udp host 10.133.10.5 eq 1813 any
access-list 112 permit udp any host 10.133.10.1 eq non500-isakmp
access-list 112 permit udp any host 10.133.10.1 eq isakmp
access-list 112 permit esp any host 10.133.10.1
access-list 112 permit ahp any host 10.133.10.1
access-list 112 permit udp host 10.133.10.5 eq 1645 host 10.133.10.1
access-list 112 permit udp host 10.133.10.5 eq 1646 host 10.133.10.1
access-list 112 remark auto generated by CCP firewall configuration
access-list 112 permit udp host 10.133.10.5 eq 1812 host 10.133.10.1
access-list 112 permit udp host 10.133.10.5 eq 1813 host 10.133.10.1
access-list 112 permit udp host 10.133.10.7 eq domain any
access-list 112 permit udp host 10.133.10.5 eq domain any
access-list 112 deny ip 62.153.xxx.xxx 0.0.0.7 any
access-list 112 deny ip 10.10.10.0 0.0.0.7 any
access-list 112 deny ip host 255.255.255.255 any
access-list 112 deny ip 127.0.0.0 0.255.255.255 any
access-list 112 permit ip any any
access-list 113 remark CCP_ACL Category=1
access-list 113 remark IPSec Rule
access-list 113 permit ip 10.133.34.0 0.0.1.255 192.168.10.0 0.0.1.255
access-list 113 remark IPSec Rule
access-list 113 permit ip 10.60.16.0 0.0.0.255 192.168.10.0 0.0.1.255
access-list 113 remark IPSec Rule
access-list 113 permit ip 10.60.16.0 0.0.0.255 10.133.10.0 0.0.1.255
access-list 113 permit udp host 83.140.100.4 host 62.153.xxx.xxx eq non500-isakmp
access-list 113 permit udp host 83.140.100.4 host 62.153.xxx.xxx eq isakmp
access-list 113 permit esp host 83.140.100.4 host 62.153.xxx.xxx
access-list 113 permit ahp host 83.140.100.4 host 62.153.xxx.xxx
access-list 113 permit ip host 195.243.xxx.xxx host 62.153.xxx.xxx
access-list 113 permit ip host 84.44.xxx.xxx host 62.153.xxx.xxx
access-list 113 remark auto generated by CCP firewall configuration
access-list 113 permit udp host 194.25.0.60 eq domain any
access-list 113 permit udp host 194.25.0.68 eq domain any
access-list 113 permit udp host 194.25.0.68 eq domain host 62.153.xxx.xxx
access-list 113 permit udp host 194.25.0.60 eq domain host 62.153.xxx.xxx
access-list 113 permit udp any host 62.153.xxx.xxx eq non500-isakmp
access-list 113 permit udp any host 62.153.xxx.xxx eq isakmp
access-list 113 permit esp any host 62.153.xxx.xxx
access-list 113 permit ahp any host 62.153.xxx.xxx
access-list 113 permit ahp host 195.243.xxx.xxx host 62.153.xxx.xxx
access-list 113 permit esp host 195.243.xxx.xxx host 62.153.xxx.xxx
access-list 113 permit udp host 195.243.xxx.xxx host 62.153.xxx.xxx eq isakmp
access-list 113 permit udp host 195.243.xxx.xxx host 62.153.xxx.xxx eq non500-isakmp
access-list 113 remark IPSec Rule
access-list 113 permit ip 10.133.34.0 0.0.1.255 10.133.10.0 0.0.1.255
access-list 113 permit ahp host 62.20.xxx.xxx host 62.153.xxx.xxx
access-list 113 remark IPSec Rule
access-list 113 permit ip 192.168.10.0 0.0.1.255 10.133.10.0 0.0.1.255
access-list 113 permit esp host 62.20.xxx.xxx host 62.153.xxx.xxx
access-list 113 permit udp host 62.20.xxx.xxx host 62.153.xxx.xxx eq isakmp
access-list 113 permit udp host 62.20.xxx.xxx host 62.153.xxx.xxx eq non500-isakmp
access-list 113 remark IPSec Rule
access-list 113 permit ip 10.133.20.0 0.0.0.255 10.133.10.0 0.0.1.255
access-list 113 remark Pop3
access-list 113 permit tcp host 82.127.xxx.xxx eq 8080 host 62.153.xxx.xxx
access-list 113 remark Pop3
access-list 113 permit tcp any eq pop3 host 62.153.xxx.xxx
access-list 113 remark SMTP
access-list 113 permit tcp any eq 465 host 62.153.xxx.xxx
access-list 113 remark IMAP
access-list 113 permit tcp any eq 587 host 62.153.xxx.xxx
access-list 113 deny ip 10.133.10.0 0.0.1.255 any
access-list 113 deny ip 10.10.10.0 0.0.0.7 any
access-list 113 permit icmp any host 62.153.xxx.xxx echo-reply
access-list 113 permit icmp any host 62.153.xxx.xxx time-exceeded
access-list 113 permit icmp any host 62.153.xxx.xxx unreachable
access-list 113 deny ip 10.0.0.0 0.255.255.255 any
access-list 113 deny ip 172.16.0.0 0.15.255.255 any
access-list 113 deny ip 192.168.0.0 0.0.255.255 any
access-list 113 deny ip 127.0.0.0 0.255.255.255 any
access-list 113 deny ip host 255.255.255.255 any
access-list 113 deny ip host 0.0.0.0 any
access-list 113 deny ip any any log
access-list 114 remark auto generated by CCP firewall configuration
access-list 114 remark CCP_ACL Category=1
access-list 114 deny ip 10.133.10.0 0.0.1.255 any
access-list 114 deny ip 10.10.10.0 0.0.0.7 any
access-list 114 permit icmp any any echo-reply
access-list 114 permit icmp any any time-exceeded
access-list 114 permit icmp any any unreachable
access-list 114 deny ip 10.0.0.0 0.255.255.255 any
access-list 114 deny ip 172.16.0.0 0.15.255.255 any
access-list 114 deny ip 192.168.0.0 0.0.255.255 any
access-list 114 deny ip 127.0.0.0 0.255.255.255 any
access-list 114 deny ip host 255.255.255.255 any
access-list 114 deny ip host 0.0.0.0 any
access-list 114 deny ip any any log
access-list 115 remark VPN_Sub
access-list 115 remark CCP_ACL Category=5
access-list 115 permit ip 10.133.10.0 0.0.1.255 172.16.0.0 0.0.255.255
access-list 115 permit ip 10.133.34.0 0.0.1.255 172.16.0.0 0.0.255.255
access-list 115 permit ip 10.133.20.0 0.0.0.255 any
access-list 116 remark CCP_ACL Category=4
access-list 116 remark IPSec Rule
access-list 116 permit ip 10.133.10.0 0.0.1.255 10.60.16.0 0.0.0.255
access-list 117 remark CCP_ACL Category=4
access-list 117 remark IPSec Rule
access-list 117 permit ip 10.133.10.0 0.0.1.255 10.60.16.0 0.0.0.255
access-list 118 remark CCP_ACL Category=4
access-list 118 remark IPSec Rule
access-list 118 permit ip 10.133.10.0 0.0.1.255 10.60.16.0 0.0.0.255
access-list 118 remark IPSec Rule
access-list 118 permit ip 192.168.10.0 0.0.1.255 10.60.16.0 0.0.0.255
no cdp run
route-map SDM_RMAP_1 permit 1
match ip address 106
control-plane
mgcp profile default
line con 0
transport output telnet
line 1
modem InOut
speed 115200
flowcontrol hardware
line aux 0
transport output telnet
line vty 0 4
session-timeout 45
access-class 110 in
transport input telnet ssh
line vty 5 15
access-class 109 in
transport input telnet ssh
scheduler interval 500
endThe crypto ACL for the site to site vpn should also include the vpn client pool, otherwise, traffic from the vpn client does not match the interesting traffic for the site to site vpn.
On Site A:
should include "access-list 107 permit ip 172.16.100.0 0.0.0.255 10.133.34.0 0.0.1.255"
You should also remove the following line as the pool is incorrect:
access-list 107 permit ip 192.168.10.0 0.0.1.255 10.133.34.0 0.0.1.255
On Site B:
should include: permit ip 10.133.34.0 0.0.1.255 172.16.100.0 0.0.0.255"
NAT exemption on site B should also be configured with deny on the above ACL. -
Hi!
I wish someone can help me on this, I'm a new guy on cisco firewalls and I'm currently implementing cisco asa 5512x, here are the details:
ISP -> Firewall -> Core switch -> Internal LAN
after installing the cisco asa and terminating the appropriate lan for the outside and inside interfaces, internet seems intermittent and cisco vpn client can connect with internet connection but can't ping internal LAN.
here's my configuration from my firewall.
ASA Version 8.6(1)2
hostname ciscofirewall
enable password 2KFQnbNIdI.2KYOU encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 203.x.x.x 255.255.255.0
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 10.152.11.15 255.255.255.0
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/4
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/5
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
ftp mode passive
dns domain-lookup outside
dns domain-lookup inside
dns server-group DefaultDNS
name-server 4.2.2.2 -------> public DNS
name-server 8.8.8.8 -------> public
name-server 203.x.x.x ----> Clients DNS
name-server 203.x.x.x -----> Clients DNS
same-security-traffic permit intra-interface
object network net_access
subnet 10.0.0.0 255.0.0.0
object network citrix_server
host 10.152.11.21
object network NETWORK_OBJ_10.10.10.0_28
subnet 10.10.10.0 255.255.255.240
object network NETWORK_OBJ_10.0.0.0_8
subnet 10.0.0.0 255.0.0.0
object network InterconHotel
subnet 10.152.11.0 255.255.255.0
access-list net_surf extended permit ip any any
access-list net_surf extended permit ip object NETWORK_OBJ_10.10.10.0_28 object InterconHotel
access-list outside_access extended permit tcp any object citrix_server eq www
access-list outside_access extended permit ip object NETWORK_OBJ_10.10.10.0_28 any
access-list outsidevpn_splitTunnelAcl standard permit 10.152.11.0 255.255.255.0
access-list LAN_Users remark LAN_clients
access-list LAN_Users standard permit any
access-list vpnpool extended permit ip 10.10.10.0 255.255.255.248 any
pager lines 24
logging enable
logging asdm informational
mtu management 1500
mtu outside 1500
mtu inside 1500
ip local pool vpnpool 10.10.10.1-10.10.10.6 mask 255.255.255.248
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
object network net_access
nat (inside,outside) dynamic interface
object network citrix_server
nat (inside,outside) static 203.177.18.234 service tcp www www
object network NETWORK_OBJ_10.10.10.0_28
nat (any,outside) dynamic interface
object network InterconHotel
nat (inside,outside) dynamic interface dns
access-group outside_access in interface outside
access-group net_surf out interface outside
route outside 0.0.0.0 0.0.0.0 203.x.x.x 1
route outside 10.10.10.0 255.255.255.248 10.152.11.15 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication telnet console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 10.0.0.100 255.255.255.255 inside
http 10.10.10.0 255.255.255.240 outside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto ikev1 enable outside
crypto ikev1 enable inside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
client-update enable
telnet 10.152.11.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
threat-detection basic-threat
threat-detection statistics
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
enable outside
anyconnect-essentials
group-policy outsidevpn internal
group-policy outsidevpn attributes
dns-server value 203.x.x.x 203.x.x.x
vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-client
split-tunnel-policy tunnelall
split-tunnel-network-list value outsidevpn_splitTunnelAcl
default-domain value interconti.com
address-pools value vpnpool
username test1 password i1lji/GiOWB67bAs encrypted privilege 5
username test1 attributes
vpn-group-policy outsidevpn
username mnlha password WlzjmENGEEZmT9LA encrypted
username mnlha attributes
vpn-group-policy outsidevpn
username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15
tunnel-group outsidevpn type remote-access
tunnel-group outsidevpn general-attributes
address-pool (inside) vpnpool
address-pool vpnpool
authentication-server-group (outside) LOCAL
default-group-policy outsidevpn
tunnel-group outsidevpn ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
inspect http
inspect ipsec-pass-thru
class class-default
user-statistics accounting
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
hpm topN enable
Cryptochecksum:edc30dda08e5800fc35b72dd6e1d88d7
: end
thanks. please help.I think you should change your nat-exemption rule to smth more general, like
nat (inside,outside) source static any any destination static NETWORK_OBJ_10.10.10.0_28 NETWORK_OBJ_10.10.10.0_28 no-proxy-arp route-lookup
'cause your inside networks are not the same as your vpn-pool subnet.
Plus, if you're trying to reach inside subnets, different from 10.152.11.0 255.255.255.0 (ip from wich subnet is assignet to your inside interface, and for wich above nat exception should be enough), you should check if routing is configured from that subnets to your vpn-pool-subnet through the ASA. -
Cisco AnyConnect VPN client and 256 AES encryption in IE8
Hey,
We have a site that we are trying to connect to with the AnyConnect VPN client version 2.5.3055 on Windows XP SP3. As soon as we enter the site info and hit select, it says a connection was unable to be established.
I believe this has to do with the encryption, its set up with 256 bit AES. We are only able to install IE8, which on XP only supports up to 128 bit encryption, so in IE8 the page will not load. To fix that issue we installed firefox which supports 256 bit encryption. We can get to the page there, but when we go to connect to the same site VIA the VPN client it still will not connect. It will work fine on a windows 7 box with IE9 installed from the same network.
My question mainly pertains to how the AnyConnect client connects on the back end. Does it use Internet explorer's SSL layer by default? Or does it have its own? If it connects through internet explorer, is there a way to change it to firefox so it will actually be able to open up a connection?
Thank you for your answers in advance,
JohnHey Jeff,
Thanks for answering that question. Hmm, so it doesnt go through the browsers SSL layer. We have systems on the same network (same proxy, firewall, vlan, etc). All the systems with windows XP SP3 and IE8/IE7 can not connect to the VPN (they arent even able to start the connection and ask for proxy/logon info.), all the systems with windows 7 and IE9 can. Same setups on each one as far as the security policies go as well. I thought it may have to do with the 256 bit encryption that they are using.
If thats not the case, what else could be causing the problem? weve tested it on about 5 XP machines and 5 Win 7 machines, same results on each. Connects on Win 7, does not connect on Win XP.
Thanks,
John -
VPN clients cannot access inside network
I have a ASA 5505 that I am using as a VPN appliance. The outside interface is connected to the DMZ (172.16.2.10) and the inside to our internal network (10.27.1.12). VPN clients are assigned an address in the range 10.27.2.2-10.27.2.20. A 1841 is the router and firewall for the network. Recently the ASA lost power when a UPS went down and now VPN clients can no longer access anything on the inside network. Config is attached. Help.
I realized after I posted that I should have a connection active when running this command. Here is the results:
Result of the command: "show crypto ipsec sa"
interface: outside
Crypto map tag: outside_dyn_map, seq num: 20, local addr: 172.16.2.10
local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
remote ident (addr/mask/prot/port): (10.27.2.2/255.255.255.255/0/0)
current_peer: 169.130.14.253, username: kenz
dynamic allocated peer ip: 10.27.2.2
#pkts encaps: 5, #pkts encrypt: 5, #pkts digest: 5
#pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 5, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 172.16.2.10, remote crypto endpt.: 169.130.14.253
path mtu 1500, ipsec overhead 58, media mtu 1500
current outbound spi: 208F45F5
inbound esp sas:
spi: 0x2026D973 (539416947)
transform: esp-3des esp-sha-hmac none
in use settings ={RA, Tunnel, }
slot: 0, conn_id: 4096, crypto-map: outside_dyn_map
sa timing: remaining key lifetime (sec): 28406
IV size: 8 bytes
replay detection support: Y
outbound esp sas:
spi: 0x208F45F5 (546260469)
transform: esp-3des esp-sha-hmac none
in use settings ={RA, Tunnel, }
slot: 0, conn_id: 4096, crypto-map: outside_dyn_map
sa timing: remaining key lifetime (sec): 28406
IV size: 8 bytes
replay detection support: Y
So it looks like there are encrypts but no decrypts. What should I do now? -
VPN clients cannot access inside LAN
I have a vpn setup. I can vpn in from either the outside (internet) or from inside my network. Once I do that I can no longer ping or remote into the server I have setup on the 192.168.1.0/24 subnet. I can ping from the 192.168.1.0 subnet to any other subnet but I cannot ping from the vpn subnet to any other subnet. I know that I have some permits on Outside-IN and Inside-IN, this is only to make it easier to troubleshoot. Thank you in advance.
The VPN subnet is 192.168.2.0
The Server subnet is 192.168.1.0
the Internal client subnet is 10.0.0.0 /24
Here is the config and the packet-tracer output
RUNNING-CONFIG
=====================
ASA Version 8.2(5)
hostname ciscoasa
enable password 2KFQnbNIdI.2KYOU encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group network Axon
network-object host 192.168.1.6
object-group network VPN-Clients
network-object 192.168.2.0 255.255.255.0
object-group service HTTP-HTTPS tcp
port-object eq www
port-object eq https
object-group service RDP tcp
port-object eq 3389
access-list Outside-IN extended permit ip any any
access-list Inside-IN extended permit ip any any
access-list Axon-NAT extended permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool VPNPool 192.168.2.2-192.168.2.10 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) 192.168.2.0 192.168.2.0 netmask 255.255.255.0
access-group Inside-IN in interface inside
access-group Outside-IN in interface outside
route outside 192.168.2.0 255.255.255.0 192.168.1.0 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
no sysopt connection permit-vpn
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 192.168.1.5-192.168.1.36 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable outside
svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
svc enable
group-policy VPNPolicy internal
group-policy VPNPolicy attributes
vpn-tunnel-protocol svc webvpn
address-pools value VPNPool
webvpn
url-list none
svc ask enable
username test2 password sLyNkwX4lP/BSsCW encrypted privilege 0
username test2 attributes
vpn-group-policy VPNPolicy
username fwaarmac password 5rABwjFzDBYcp0nJ encrypted privilege 15
username fwaarmac attributes
vpn-group-policy VPNPolicy
username test1 password sLyNkwX4lP/BSsCW encrypted privilege 0
username test1 attributes
vpn-group-policy VPNPolicy
username dan password vFpifCksRBgKm.0Q encrypted privilege 15
username dan attributes
vpn-group-policy VPNPolicy
tunnel-group DefaultWEBVPNGroup general-attributes
default-group-policy VPNPolicy
tunnel-group VPN type remote-access
tunnel-group VPN general-attributes
address-pool VPNPool
default-group-policy VPNPolicy
tunnel-group VPN webvpn-attributes
group-alias vpn enable
group-url https://10.0.0.10/vpn enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:b8d7144e7d51265fa9a5f38e29f40269
: end
NAT / PACKET-TRACER
========================
packet-tracer input outside tcp 192.168.2.1 3389 192.168.1.6 3389 detailed
Phase: 1
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 192.168.1.0 255.255.255.0 inside
Phase: 2
Type: ACCESS-LIST
Subtype: log
Result: ALLOW
Config:
access-group Outside-IN in interface outside
access-list Outside-IN extended permit ip any any
Additional Information:
Forward Flow based lookup yields rule:
in id=0xc95ea0e0, priority=12, domain=permit, deny=false
hits=5247, user_data=0xc793c350, cs_id=0x0, flags=0x0, protocol=0
src ip=0.0.0.0, mask=0.0.0.0, port=0
dst ip=0.0.0.0, mask=0.0.0.0, port=0, dscp=0x0
Phase: 3
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional Information:
Forward Flow based lookup yields rule:
in id=0xc95e6d48, priority=0, domain=inspect-ip-options, deny=true
hits=10050, user_data=0x0, cs_id=0x0, reverse, flags=0x0, protocol=0
src ip=0.0.0.0, mask=0.0.0.0, port=0
dst ip=0.0.0.0, mask=0.0.0.0, port=0, dscp=0x0
Phase: 4
Type: HOST-LIMIT
Subtype:
Result: ALLOW
Config:
Additional Information:
Forward Flow based lookup yields rule:
in id=0xc959fab8, priority=0, domain=host-limit, deny=false
hits=5248, user_data=0x0, cs_id=0x0, flags=0x0, protocol=0
src ip=0.0.0.0, mask=0.0.0.0, port=0
dst ip=0.0.0.0, mask=0.0.0.0, port=0, dscp=0x0
Phase: 5
Type: NAT
Subtype: rpf-check
Result: DROP
Config:
nat (inside) 1 0.0.0.0 0.0.0.0
match ip inside any outside any
dynamic translation to pool 1 (10.0.0.10 [Interface PAT])
translate_hits = 88, untranslate_hits = 7
Additional Information:
Forward Flow based lookup yields rule:
out id=0xc962a5f8, priority=1, domain=nat-reverse, deny=false
hits=415, user_data=0xc962a388, cs_id=0x0, flags=0x0, protocol=0
src ip=0.0.0.0, mask=0.0.0.0, port=0
dst ip=0.0.0.0, mask=0.0.0.0, port=0, dscp=0x0
Result:
input-interface: outside
input-status: up
input-line-status: up
output-interface: inside
output-status: up
output-line-status: up
Action: drop
Drop-reason: (acl-drop) Flow is denied by configured ruleYou would need to configure NAT exemption for the VPN client to access internal host:
access-list nonat permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list nonat permit ip 10.0.0.0 255.255.255.0 192.168.2.0 255.255.255.0
nat (inside) 0 access-list nonat
route inside 10.0.0.0 255.255.255.0 192.168.1.x
access-list splitacl permit 192.168.1.0 255.255.255.0
access-list splitacl permit 10.0.0.0 255.255.255.0
group-policy VPNPolicy attributes
split-tunnel-policy tunnelspecified
split-tunnel-network-list value splitacl -
Problem using SunRay with Cisco AnyConnect VPN Client
I am using Cisco AnyConnect VPN Client Version 2.5.3046
I have a PC and a SunRay connected to my router. I use VPN to connect my SunRay and my PC to my work computer. My PC works fine, I am able to connect to the internet and also run cisco VPN to connect to my work computer. But when I try to use my SunRay, I get a window on the screen with the message:
VPN IKE Phase 1 agg I msg1This window keeps moving around on the screen. I am not able to connect my SunRay through VPN to my work computer. Any idea what could be wrong and how I can fix this?2.2 is definitely better.
On one PC, I'm fine. On another -- very similar -- it tells me it can't start the VPN even after uninstalling and re-installing and everything else I can think of, with plenty of re-boots inbetween.
Aaaaarrrrrrggggggghhhh. -
Server 2003 VPN clients can't verify username and password
Hi,
Hoping someone can help or point me in the right direction. I have a Windows Server 2003 R2 standard SP2 running RRAS. It has Dual NIC's and is configured for PPTP VPN. I am using a BT Business Hub 5 for internet access and using the BT Static IP service.
The BT Hub assigns the static IP address chosen to the Server using DHCP. The firewall is configured to port forward PPTP traffic to the 2003 server. This all works correctly.
The 2003 server is on a domain where the DC is a 2008 R2 server. The DC also acts as the DNS and DHCP for the network.
The default gateway for the domain is pointed towards our WinGate proxy server which also acts as a DNS server.
The 2003 server LAN NIC is configured manually, usually I would not configure a deafult gateway on the LAN NIC as the WAN NIC needs the default gateway for the BT Hub.
The problem I am having is if a default gateway is configured on the LAN NIC, I can connect to the VPN and it will logon to the network. Once connected everything works ok. If the connection drops, when trying to reconnect the client can no longer verify
the user name and password against the domain and the connection is refused.
If I do not have a default gateway configured in the LAN NIC the VPN clients can not verify the username and password for the domain at all and I get RPC failure errors in the event viewer with the source dnsapi.
Once this error occurs the only way I can get the clients to reconnect is to disable the WAN NIC, restart the RRAS service and enable the WAN NIC again.
Any insight will be much appreciated.Hello,
for Networking configuration questions better ask in
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home#forum=winserverNIS&filter=alltypes&sort=lastpostdesc&content=Search
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
VPN Client cannot access Internet
I am currently using PIX 501 and VPN 3000. Everything is running fine except that VPN Client cannot access internet after they logged in via Cisco System VPN CLient. I can't any solution to this problem and is really lost. This is a very important task assign to me.
Hope someone can help me asap.
Thanks YouYou need to enable split tunneling. This link is for VPN client to router. The same equivalent config may apply to a PIX as well.
http://www.cisco.com/application/pdf/en/us/guest/products/ps6659/c1650/cdccont_0900aecd80313bf8.pdf
Maybe you are looking for
-
I need the code to delete record in the database not in the form???
I need the code to delete record in the database not in the form... because when i execute a form always insert the datas in the data base but i want insert value on a text file and delete in the data base the record whith this value of text file. i'
-
Font Scrambling in PDF Conversions from Word 2004
Our Imago fonts periodically get scrambled into garbage when using the Adobe 7.0 Pro Distiller to convert documents. We purchased the Imago fonts specifically for use in our business and have used this for a number of years and the problem continues
-
Why is row currency not reset back in my iterator
Dear All, Use case: I am displaying my view object in an input form with navigation controls. In a method I need to do some processing on some rows in an iterator and then after processing I need to return the row currency to the first row. Please co
-
Query Jump from Bex Analyzer to r/3 transactions: error of web server
Hello, I have created a query jump in the RSBBS transaction to go in R/3 through a Bex Query. When i choose the jump in the query anayzer I have the error message: <b>No Web server maintained for the presentation of log. system.</b> Do you have ever
-
Buttons in Fireworks - Studio 8
This may be basic, I am not sure. I need to copy a button I have designed with all the over states and I want the copy to be editable with different text. Every time I copy a button, when I edit the text, the text in the original button changes also.