Control+Z doesnt work while skype desktop is runni...

Hi Friends,
A while ago I saw that Control+z (undo) does not work. 
I googled it and found on a forum that a previous version of skype had caused this issue.
And I dediced to try it and it worked for me.
So As of today Control+Z function of Windows 8 does not work on my desktop while Skype's latest version is running.
Any work around, or any plans to fix it?
Thanks,
Ulaş

Great. Thanks a lot

Similar Messages

  • How do u reboot the computer when the control pad doesnt work

    how do u reboot the macbook pro when the control pad doesnt work??? and does anyone know how to get the control pad to work i cant move the cursor??

    By "control pad" do you mean "trackpad?" If the trackpad has stopped working then press the Power button and hold it down for 5-10 seconds. This will shutdown the computer. Insert the installer disc then restart the computer. After the chime press and hold down the "C" key until the computer starts up and you see the spinning gear. Then:
    Repair the Hard Drive and Permissions
    After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • FATALITY GAMING USB HS-1000 volume control button doesnt work

    I have just bought CREATIVE FATALITY GAMING USB HS-1000 headset. Everything is ok, except of volume control button on wire, it just doesnt work. I have installed and updated drivers, nothing helped. I have readed few topic on similar issues, but there wasnt any solution. My OS is winXP SP3.

    Have you tested your headset jock or where you plug your headset? It may be coming from that, as you have said you have tested the unit in another pc.

  • Animation doesnt work while in browser

    Hi
    I have created a director movie and when I publish it for the
    browser one of my animations doesnt work. All of my other
    animations work fine just this one. The animation in question works
    when in director.
    I have checked that the animation is linked to the correct
    file. I have compared things with the other animations and they
    both are the same so I really dont know why it doesnt work.
    It is probably something obvious and I just can see it
    Thanks for your help

    What kind of animation? Are you simply moving something
    across the
    screen? Is it an animated gif? Is it a series of cast members
    shown in
    sequence?
    One thing you've probably already checked, but it's the only
    thing I can
    think of without knowing more - have you tried playing with
    internally
    linked versus externally linked?

  • I just downloaded ios7 and the control panel doesnt work no matter how many times i swipe from the  bottom. help please!

    so i downloaded ios7, waited, and everything seems fine and dandy. except for the fact that i cant access the control panel. i tried swiping for hours, i googled solutions, tried figuring it out myself, but nothing is working. my orientation screen is locked. if that matters? so can someone please tell me what i should do? thank you!

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414

  • Table Control Sort doesnt  work , plz check my code

    Hello
      Flag is defined thr in TCL1 attribute list(checked) w/selColumn & value is FLAG ,also defined as char in prog
      But syntax error is "No component exist with the name FLAg "
       Plz correct me .
       REPORT ZSD_REP_ORDER_BANK_CHANGE NO STANDARD PAGE HEADING LINE-SIZE 255.
    TABLES: VBAK,VBAP,VBRK,ZSD_TABL_ORDBANK,MARA,KONV.
    CONTROLS: TCL1 TYPE TABLEVIEW USING SCREEN 0200.
    DATA: ITAB LIKE ZSD_TABL_ORDBANK OCCURS 0 WITH HEADER LINE,
          WA_ITAB LIKE ZSD_TABL_ORDBANK,
          OK_CODE LIKE SY-UCOMM,
          SAVE_OK_CODE LIKE SY-UCOMM,
          ANSWER TYPE C,
          I LIKE SY-LOOPC ,
          J LIKE SY-LOOPC,
          V_LINES LIKE SY-LOOPC,
          LINE_COUNT LIKE SY-LOOPC,
          STS  TYPE N,
          FLAG,
          EMGRP LIKE MARA-EXTWG,
          QTY LIKE ZSD_TABL_ORDBANK-QTY,
          UPRICE LIKE ZSD_TABL_ORDBANK-UPRICE,
          TOT LIKE ZSD_TABL_ORDBANK-TOT,
          INO LIKE VBAP-POSNR.
    FIELD-SYMBOLS:
         <FS_ITAB> LIKE LINE OF ITAB,
         <FS_TCL1> LIKE LINE OF TCL1-COLS.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
      SELECT-OPTIONS: S_CCODE FOR ZSD_TABL_ORDBANK-CCODE
                              NO INTERVALS NO-EXTENSION  OBLIGATORY,
                      S_SORG  FOR ZSD_TABL_ORDBANK-SORG
                              NO INTERVALS NO-EXTENSION  OBLIGATORY,
                      S_DCHAN FOR ZSD_TABL_ORDBANK-DISTCHAN,
                      S_DIV FOR ZSD_TABL_ORDBANK-DIV,
                      S_MATNO FOR ZSD_TABL_ORDBANK-MATNO,
                      S_CUSTNO FOR ZSD_TABL_ORDBANK-CUSTNO ,
                      S_QTNO FOR ZSD_TABL_ORDBANK-QTNO,
                      S_QTDAT FOR ZSD_TABL_ORDBANK-QTDAT,
                      S_QTVDAT FOR ZSD_TABL_ORDBANK-QTVALDAT,
                      S_SONO   FOR ZSD_TABL_ORDBANK-SONO.
    SELECTION-SCREEN END OF BLOCK b1.
    AT SELECTION-SCREEN.
       SELECT * FROM  ZSD_TABL_ORDBANK
                   INTO  TABLE ITAB
                   WHERE CCODE IN S_CCODE
                     AND SORG IN  S_SORG
                     AND DISTCHAN IN  S_DCHAN
                     AND DIV IN S_DIV
                     AND MATNO IN  S_MATNO
                     AND CUSTNO IN  S_CUSTNO
                     AND QTNO IN  S_QTNO
                     AND QTDAT IN  S_QTDAT
                     AND QTVALDAT IN  S_QTVDAT
                     AND SONO IN  S_SONO .
          IF SY-SUBRC EQ 0.
             REFRESH ITAB.
             CALL SCREEN 0200.
          ELSE.
             MESSAGE E012(ZQOTBANK) .
          ENDIF.
    *&      Module  SET_STATUS  OUTPUT
          text
    MODULE SET_STATUS OUTPUT.
      SET PF-STATUS '0200'.
      SET TITLEBAR '0200'.
          SELECT * FROM  ZSD_TABL_ORDBANK
                   INTO  TABLE ITAB
                   WHERE CCODE IN S_CCODE
                     AND SORG IN  S_SORG
                     AND DISTCHAN IN  S_DCHAN
                     AND DIV IN S_DIV
                     AND MATNO IN  S_MATNO
                     AND CUSTNO IN  S_CUSTNO
                     AND QTNO IN  S_QTNO
                     AND QTDAT IN  S_QTDAT
                     AND QTVALDAT IN  S_QTVDAT
                     AND SONO IN  S_SONO .
          IF SY-SUBRC EQ 0.
            DESCRIBE TABLE ITAB LINES V_LINES.
            TCL1-LINES = V_LINES.
          ENDIF.
          LOOP AT ITAB.
             QTY = ITAB-QTY.
             UPRICE  = ITAB-UPRICE.
             TOT = QTY * UPRICE .
             ITAB-TOT = TOT .
             CLEAR: QTY, UPRICE, TOT.
             QTY = ITAB-CGL_QTY.
             UPRICE  = ITAB-CGL_UPRICE.
             TOT = QTY * UPRICE .
             ITAB-CGL_TOT = TOT .
             CLEAR: QTY, UPRICE, TOT.
             QTY = ITAB-BHEL_QTY.
             UPRICE  = ITAB-BHEL_UPRICE.
             TOT = QTY * UPRICE .
             ITAB-BHEL_TOT = TOT .
             CLEAR: QTY, UPRICE, TOT.
             QTY = ITAB-ALSTOM_QTY.
             UPRICE  = ITAB-ALSTOM_UPRICE.
             TOT = QTY * UPRICE .
             ITAB-ALSTOM_TOT = TOT .
             CLEAR: QTY, UPRICE, TOT.
             QTY = ITAB-SIEMENS_QTY.
             UPRICE  = ITAB-SIEMENS_UPRICE.
             TOT = QTY * UPRICE .
             ITAB-SIEMENS_TOT = TOT .
             CLEAR: QTY, UPRICE, TOT.
             QTY = ITAB-TELK_QTY.
             UPRICE  = ITAB-TELK_UPRICE.
             TOT = QTY * UPRICE .
             ITAB-TELK_TOT = TOT .
             CLEAR: QTY, UPRICE, TOT.
             QTY = ITAB-OTH_QTY.
             UPRICE  = ITAB-OTH_UPRICE.
             TOT = QTY * UPRICE .
             ITAB-OTH_TOT = TOT .
             CLEAR: QTY, UPRICE, TOT.
             MODIFY ITAB.
          ENDLOOP.
    ENDMODULE.                 " SET_STATUS  OUTPUT
    *&      Module  SET_LINE_COUNT  INPUT
          text
    MODULE SET_LINE_COUNT OUTPUT.
      LINE_COUNT = SY-LOOPC.
    ENDMODULE.                 " SET_LINE_COUNT  INPUT
    *&      Module SCROLL INPUT
          text
    MODULE SCROLL_SORT INPUT.
    SAVE_OK_CODE = OK_CODE.
    CLEAR OK_CODE.
    CASE SAVE_OK_CODE.
      WHEN 'P--'.
          TCL1-TOP_LINE = 1.
      WHEN 'P-'.
          TCL1-TOP_LINE = TCL1-TOP_LINE - LINE_COUNT.
          IF TCL1-TOP_LINE LE 0.
             TCL1-TOP_LINE = 1.
          ENDIF.
      WHEN 'P+'.
          I = TCL1-TOP_LINE + LINE_COUNT.
          J = TCL1-LINES - LINE_COUNT + 1.
          IF J LE 0.
             J = 1.
          ENDIF.
          IF I LE J.
             TCL1-TOP_LINE = I.
          ELSE.
             TCL1-TOP_LINE = J.
          ENDIF.
      WHEN 'P++'.
          TCL1-TOP_LINE = TCL1-LINES - LINE_COUNT + 1.
          IF TCL1-TOP_LINE LE 0.
              TCL1-TOP_LINE = 1.
          ENDIF.
      WHEN 'SORTUP'.
          READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY FLAG = 'X'.
          IF SY-SUBRC = 0.
              SORT ITAB ASCENDING BY (<FS_TCL1>-screen-name+5).
          ENDIF.
      WHEN 'SORTDN'.
          READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY FLAG = 'X'.
          IF SY-SUBRC = 0.
              SORT ITAB DESCENDING BY (<FS_TCL1>-screen-name+5).
          ENDIF.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND  INPUT
    *&      Module  UPDATE_MOD  INPUT
          text
    MODULE UPDATE_MOD INPUT.
    CASE OK_CODE.
    WHEN 'SAVE'.
          UPDATE ZSD_TABL_ORDBANK FROM ITAB .
          STS = SY-SUBRC .
          IF STS NE 0.
               MESSAGE E003(ZQOTBANK) .
          ENDIF.
      ENDCASE.
    ENDMODULE.                 " UPDATE_MOD  INPUT
    *&      Module  EXIT_COMAND  INPUT
          text
    MODULE EXIT_COMAND INPUT.
    CASE OK_CODE.
        WHEN 'BACK'.
          CALL FUNCTION 'POPUP_TO_CONFIRM'
            EXPORTING
              TITLEBAR       = 'Order Bank Entry'
              TEXT_QUESTION  = 'Do you want to Go BacK ?'
              TEXT_BUTTON_1  = 'Yes'
              TEXT_BUTTON_2  = 'No'
              DEFAULT_BUTTON = '2'
            IMPORTING
              ANSWER         = ANSWER.
          IF ANSWER = '1'.
            LEAVE TO SCREEN 0.
          ELSE.
          ENDIF.
        WHEN '%EX'.
          CALL FUNCTION 'POPUP_TO_CONFIRM'
            EXPORTING
              TITLEBAR       = 'Order Bank Entry'
              TEXT_QUESTION  = 'Do you want to Exit ?'
              TEXT_BUTTON_1  = 'Yes'
              TEXT_BUTTON_2  = 'No'
              DEFAULT_BUTTON = '2'
            IMPORTING
              ANSWER         = ANSWER.
          IF ANSWER = '1'.
            LEAVE TO SCREEN 0.
          ELSE.
          ENDIF.
      ENDCASE.
    ENDMODULE.                 " EXIT_COMAND  INPUT
    Tnx advance

    Hi Moni,
    The Problem is with the READ statement.
    READ TABLE TCL1-COLS ASSIGNING <FS_TCL1> WITH KEY FLAG = 'X'.
    The structure of TCL1 is different from what you think. TCL1 will be a deep structure with an internal table COLS. Now this internal table COLS will have the  standard structure:
    SCREEN
    INDEX
    SELECTED
    VISLENGTH
    INVISIBLE
    The Read statement tries to find a field of name FLAG in the TCL1-COLS structure. Therefore you get the error.
    Try to read the COLS table with a correct key.
    Regards,
    Anand Mandalika.

  • My mouse scroll wheel doesnt work while using firefox, but works with everthing else

    when using firefox my mouse wheel will not work in any website, it will work if i open a pdf file

    If it's an Acer laptop, there appears to be a bug with the ALPS drivers. See: https://bugzilla.mozilla.org/show_bug.cgi?id=605357

  • HT1420 i need to authorize my computer.  alt s and control b doesnt work.  there is no drop down menu

    I can't authorize my computer.  I did alt s and control b.  there is no drop down menu.  I have a windows computer.  I looked and tried everything Ive seen on community discussions.  apple's page didnt help

    Yay I found it!!!!  It is a little square box the is half black and half white with a arrow.   It is on the page that the music pictures moves to show the latest songs etc.   thank you diesel

  • Tactic3d Alpha Control Panel doesnt work!

    hey guys
    I use the headset for some time(around 12 months) and have never had problems wit it.
    Since yesterday, the panel does not work anymore, I can open it normally without any error or freezing but than
    I can not accept any setting,EQ,FW , its always the same sound WTF... is this?
    I uninstalled and installed it several times without success -...
    ill hope u can help me,maybe some1 got old driver for me ?
    ps: im using win7 64bit
    sorry for my english

    hey guys
    I use the headset for some time(around 12 months) and have never had problems wit it.
    Since yesterday, the panel does not work anymore, I can open it normally without any error or freezing but than
    I can not accept any setting,EQ,FW , its always the same sound WTF... is this?
    I uninstalled and installed it several times without success -...
    ill hope u can help me,maybe some1 got old driver for me ?
    ps: im using win7 64bit
    sorry for my english

  • Speakers not working for Skype only on Windows 8.1

    My speakers or headphones are not working for Skype desktop but work fine for any music or videos or other programms. Any help to resolve it? in Tools>Options>Audio Settings> headphones does not show up. Everything was working fine but it just happend a day before., i havent installed any program that could make problem.

    This is very strange because, as you are saying this happened without any change to any software on your computer. I suggest the following:
    1. To help the team analyze the issue, provide logs as described in this link  under Skype for Windows Desktop and attach it to your post.
    2. As an interim solution you can try using a virtual audio device that will be a middle man between skype and your physical audio device.

  • My AMD Catalyst Doesnt Work

    My Laptop's AMD catalyst Control Center Doesnt Work. It used to Work But I Accidently Deleted One of the AMD catalyst Files. And then After that I cant use it. I got no Recovery. Everytime I click Configurable graphics. It shows a CLI.exe - Application Error. The exception unknown software exception (0xe0434352) occured in the application at location 0x788d8b9c. I tried Redownloading The AMD catalyst thing with the suitable one But it still doesnt work And happened the same thing again. Anyone can help me solve this problem? I was using AMD Website to download it.

    RedCheesecake wrote:
    My Laptop's AMD catalyst Control Center Doesnt Work. It used to Work But I Accidently Deleted One of the AMD catalyst Files. And then After that I cant use it. I got no Recovery. Everytime I click Configurable graphics. It shows a CLI.exe - Application Error. The exception unknown software exception (0xe0434352) occured in the application at location 0x788d8b9c. I tried Redownloading The AMD catalyst thing with the suitable one But it still doesnt work And happened the same thing again. Anyone can help me solve this problem? I was using AMD Website to download it.
    Means you need to go to your HP driver site and redownload the AMD driver for your O/S and reinstall it again and hopefully this should fix the problem.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Headphones dont work on skype (but work with all o...

    Hello,
    The problem with my skype is that although I connect my headphones to the computer, the sound does not come through the headphones. The sound comes via the laptop speakers as if I am using the skype without any headphones. It becomes very inconvenient as everyone around me can then listen to my conversation. The headphones work fine with all other applications on my laptop like youtube, itunes or anything that I play on the laptop. It just doesnt work with skype. I uninstalled and installed skype again still the same things happen. Please help me out with this problem.

    @itsjustjp, what kind of headphones do you have?
    Are you using the latest 6.21 version of Skype
    http://www.skype.com/en/download-skype/skype-for-windows/downloading/

  • Recently bought a macbook air and the camera doesnt work

    Its super frustrating.
    It did work once with skype, but after i tried using photobooth it stopped working completely and now it doesnt work on skype, googlehangouts and neither, of course, on photobooth. The computer is quite new and i attempted using the camera only a few times.
    Any idea on what this might be?
    Maybe something with updates?

    juliavalle wrote: Recently bought a macbook air and the camera doesnt work
    iSight camera failure after OS X 10.9 Mavericks update might resolve your trouble.
    If not, contact the retailer who sold you the new Mac ASAP.  It may need replacement or repair. 
    If you bought directly from Apple on-line, you can Contact Apple's MacBook Air Support or an Apple Authorized Service Provider for help.

  • Whole left side of the keyboard doesnt work, can't login!

    Hey
    i have a big problem: just 20minutes ago i changed the security preferences on my mac book, which i got one week ago
    i wanted to try out the password function after sleep modus, that means, if i want the macbook wake up he ask me for my password
    i tried directly, and let him be in sleepmodus, but when i wanted to make him wake up and he asked me for my password, the whole left sid of the keyboard didn't work! p, u, i, k, l aso. work, but w, a, s aso. doesnt work. now i cant use the keys, which i need for my password! what should i do?
    i tried to switch of completly but i dont know how, because even the keys control, alt doesnt work.
    i'm very frustrated, i hope, somebody can help me

    hey
    have solved the problem ;9 i used an externe keyboard, like you said, logged in and changed the keyboard prefernces :3 i had just an number dingsda (?) xD solved with fn + F6, after checkmark in attitudes for keyboard
    thank you ;D

  • My mac's desktop is gray, the dock wont show up, nor mission control or launchpad work. What should I do

    I recently logged in to my mac and while the finder relaunched it got frozen and is now gray. The dock does not show up or work. The launchpad doesnt work nor does mission control. I can only open applications from a finder window. The apps dont even work in fullscreen. Ive tried restarting it, logging in to another account, and booting in safe mode. None work. I will try to move my things to my other computer for the time.
    What should I do?

    Run through this list of fixes, if your getting in do #9 as soon as possible.
    Step by Step to fix your Mac

Maybe you are looking for