Control zoom

In Lion you could smoothly zoom the screen by holding  control and scrolling on the magic mouse. In mountain Lion it does not work . Is it me, am I missing something or is it gone?

It should be set up like lion within lion if you wanted to do this you went to system preferences then to universal access and then to seeing and then where it says zoom you had to make sure the modifier key is stand that will solve it for you

Similar Messages

  • Control Zoom Artifacts

    I have had my MacBook Pro i7 for about 2 months now. I noticed that sometimes lately (about 3 times in the past month) when I use the Control Zoom feature to zoom in the screen there are some ridiculous artifacts that appear. The screen will literally shift or off center to the left of the screen (about 4 inches) and the now empty right side will be filled with weird purple artifacts on screen. This only locks up and happens for about 2 seconds and then its back to normal.
    Has anyone else experienced this issue?

    Thanks for the information about USB Overdrive. I hadn't heard of that one but will check it out.
    I will include what I know from the manufacturer's websites in case anyone else is having similar problems. Kensington claims that Mouse Works, their driver software is fully supported in SL but, they have stopped development for it and they did not provide an answer to my question as to whether they were working on new driver software. I will say that all the functionality of Mouse Works is intact with the one exception of scroll-zooming.
    Wacom informed me that they are aware of this problem and currently are working on a solution but did not provide a time frame as to when they may be releasing an update or a new software piece. So it would seem that while Wacom is concerned and working to resolve the issue, Kensington has chosen to abandon its customers which is a shame considering the quality and workmanship of their products.
    For anyone following this thread I will keep it updated as I learn new information but as it stands now, it seems that scroll-zooming with Kensington's Expert Mouse trackball is vapor and won't return. I'm pinning my hopes on Wacom and while this would still be cumbersome it will be less so than having a fourth input device on my desk (trackball, tablet, 3Dconnexion and Mighty Mouse being the fourth).

  • Control +/- Zoom disabled Cs4??

    Hello, I am having a frustrating problem. WHen I try to use
    my control +/- zoom, it is not working. Is there something I could
    have done to disable that? I checked my number lock. I also looked
    at the keyboard shortcuts and under the zoom shortcut there is a
    yellow triangle that shows up with a message that says "this
    shirtcut is already assigned to the pin script command", which I
    assume is normal. I do not know how to fix this and searched forums
    as well. I appreciate the help!

    This is only occuring with the number pad.

  • Screenshots with Control-Zoom

    I'm trying to take screenshots with control-zoom but everytime I try 'command-shift-3' it takes a picture of the whole desktop (zoomed out) or 'command-shift-4' it limits how small of a screen shot I can take. Basically I want to be able to zoom really close on whatever part of the screen then capture exactly what I'm seeing on the screen. I.E. zoom really close on someone's face and take a screen cap of it, pixels and all. Anyone get what I'm saying? Anyone know how I can do this?
    Thank you.

    Thanks for the information about USB Overdrive. I hadn't heard of that one but will check it out.
    I will include what I know from the manufacturer's websites in case anyone else is having similar problems. Kensington claims that Mouse Works, their driver software is fully supported in SL but, they have stopped development for it and they did not provide an answer to my question as to whether they were working on new driver software. I will say that all the functionality of Mouse Works is intact with the one exception of scroll-zooming.
    Wacom informed me that they are aware of this problem and currently are working on a solution but did not provide a time frame as to when they may be releasing an update or a new software piece. So it would seem that while Wacom is concerned and working to resolve the issue, Kensington has chosen to abandon its customers which is a shame considering the quality and workmanship of their products.
    For anyone following this thread I will keep it updated as I learn new information but as it stands now, it seems that scroll-zooming with Kensington's Expert Mouse trackball is vapor and won't return. I'm pinning my hopes on Wacom and while this would still be cumbersome it will be less so than having a fourth input device on my desk (trackball, tablet, 3Dconnexion and Mighty Mouse being the fourth).

  • Imaq Display Control, zoom to fit disappeare​d at runtime.

    Like in the title. The right-click menu is impossible to call at runtime in the Imaq Display control. This has happened after compiling the code.
    Some idea why it is happen this?
    Francesco.
    Solved!
    Go to Solution.

    Thank you very much, this is exactly what i search for!
    b.ploetzeneder ha scritto:
    I have had this problem before. 
    The solution is not very pretty, but it can be found here: http://forums.ni.com/t5/LabVIEW/Missing-quot-Zoom-​to-fit-quot-in-application-EXE-build/td-p/905681
    Birgit

  • Macro or vba to control zoom of excel workbook

    Hi
    all workbooks when executed zooms out to 100% automatically
    how do i write vba code or macro to control this zoom to 75%
    where do i write it
    also i save workbooks with zoom 75% on bw server, still upon execution or refresh it zooms out to 100%
    referring other posts but no help
    thnx
    gurus !!!!!!!
    Edited by: kartikey on Jun 10, 2009 12:38 PM

    Hi Kartikey,
    Please try this way,
    Run your Bex query first, When you get the data then follow the below steps,
    Right click on 'sheet1' ---> select 'View Code'
    Here you will get SAPBEX(sapbex.xla) which is password protected , forget it
    another one is VBAProject, under this project Double click on Sheet1(SAPBEXQueries)
    and paster below given code
    Private Sub Worksheet_Change(ByVal Target As Range)
        ActiveWindow.Zoom = 75
    End Sub
    now this will set your worksheet zoom to 75% , if you refresh your query , this will be remain same,
    Please let me know if this is  helpful for you
    Cheers
    Sukhi
    9717080615
    Edited by: Sukhvidner Singh on Jun 11, 2009 1:01 PM

  • Control Zoom Feature

    I was wondering if it's possible to control the location/amount of zoom when you double tap the iPad in DPS for InDesign.
    Hopefully that was clear.
    Thanks!

    Hello
    I'm working on a 1280* 752 on Galaxytab 10.1
    I have to TAP before the zoom can work
    I put the zooms in a dedicated page, in a box that is 1192*752, at the left, i just keep a column on the right to put navigation buttons
    Can't it work "directly" ?
    thanx

  • Imaq Image Display Control - Zoom tool - zoom factor changes slowly

    Hi at all,
    we have a strange behavior with the zoom factor of the Image Display Control in an Labview executable.
    Ususally by clicking into the image with the zoom tool activated, the zoom factor changes from 1,2,4,8,16, ... ("x2")
    Now we have one PC, where it changes from 1,2,3,4,5,... ("+1")
    Has anyone an idea on which windows setting this behavior depends on? The PC runs with Windows XP SP3, the LV-Exe was built
    with LabVIEW 8.5.1 and the Vision Development Module 8.5.0. Is there any regsitry setting where I can adjust the "click intensity" or
    something like that? Or can I set a property of the image control to force a specific behavior?
    Actually I have never seen this behavior before, I only know the half/double mode. 
    In the software the operator has to search for fiducials on PCBs what means he has to click several times into the image.
    Changing in the Mode "+1" instead of "x2" is not acceptable for him.
    Thanks for your help!
    Stefan

    Hello Stefan,
    thank you for posting at the National Instruments forum. The "Zoom Behaviour" was changed due to customer requests. I totally agree with you, that it is not the best solution to click 24-times to get the desired region of interest.
    I created a small example for LabVIEW 2010, which uses a property node and event structure, to perform the zoom programmatically.
    Best regards
    MarianO
    Attachments:
    Calculate Zoomfactor.vi ‏21 KB
    Image Example.vi ‏63 KB

  • Controlling zoom size on pdf opened in browser from webserver

    I want my PDF to open at a certain zoom size when someone clicks a link to it in their browser (the link is on my site, as is the PDF). I have tried the Properties > Initial View > Magnification, and also tagging #view=fit onto the end of the pdf URL, but neither is working.

    It will only work if the file is opened in a browser window using the Adobe plugin. If other plugins are used then all bets are off.

  • Screen (control-zoom) and Quicktime, Preview/TextEdit recents

    The zoom screen (ctrl-scroll) is not enabled by default. The only way to enable it is to go to System Preferences/Universal Access/Seeing and then play with the Zoom on/off and options/use scroll wheel ...      Then you need to reboot. The problem is, unless choosing the settings to enable the feature is the VERY LAST thing you do before restarting, it doesn't do it anymore. The settings are still as I left them, but the zoom doesn't work unless I reset them  and reboot again.
    There really needs to be a "Close All" option in Quicktime, Preview and TextEdit. It's really annoying to open a pic and have everything I ever opened pop up as well.

    Another similar thread on this issue...
    http://discussions.apple.com/thread.jspa?messageID=1602391

  • Camera control zoom take picture

    Hey
    Im an engineering student and my classmates and me got a project. For this project we need a cheap way to let labview give the photo camera the assignment "take a picture" and "zoom". What is the best way to do this? I found something about Vision Acquisition but that's quite expensive, isn't it?
    Thanks

    For acquiring image, use USB camera (DirectShow compatible), and the USB camera acquisition driver (IMAQ for USB) is freely available.
    Refer following links:
    1> http://sine.ni.com/nilex/DisplayLinkAction.do?id=1​63NILEX
    2> http://zone.ni.com/devzone/cda/epd/p/id/5030
    I am not allergic to Kudos, in fact I love Kudos.
     Make your LabVIEW experience more CONVENIENT.

  • Controlling zoom with scroll effect

    I really like the scrolling zoom effect on this site (first scroll effect): http://www.discovershadow.com
    I would love to see something similar included in muse.
    That is all.

    Okay...did that too.  We'll see.  I appreciate your help. 
    Having a major printing problem though.  Looks like I am going to be doing a lot of testing soon because the presents for my Canon iP6700D don't work like they did two days ago.  Canon has a new driver which I believe is the problem.  Maybe I can get back to the other one that worked like a charm.  -- Sandy

  • Controlling zoom on nested divs?

    Greetings,
    I have three horizontal nested divs in a outer div.
    The 3 nested divs are set to absolute position and the outer div
    is set to relative position with align to center and a 100% page width.
    The problem:
    The left and right divs have a jpg.
    The center div has text.
    When you zoom in all browsers except firefox, the center div with the text
    keeps getting narrower, as the two outer divs with the jpgs keep expanding.
    How does one keep the center div with the text from getting squeezed in all browsers,
    so that the center div width stays constant as the zoom increases?

    It will only work if the file is opened in a browser window using the Adobe plugin. If other plugins are used then all bets are off.

  • I accidentally held down control and zoomed in, and it enlarged my entire screen. How do I get the zoom on my screen back to normal?

    This is my first Mac so it's pretty much foreign to me. I was holding down control and accidently used two fingers to zoom on my track pad, and it zoomed in on my entire screen. How do I zoom out and get my screen back to normal?

    On the track pad control while moving two fingers down to zoom out to the original size and control plus two fingers moved up to zoom on.
    Alternatively if you have a magic mouse use control and drag one finger up and down on the mouse to control zooming.  If mouse wheel use control and move the wheel.

  • Accessability/Universal Access - Zoom does not work in Launchpad/Mission control

    If using the Accessability 'Zoom' option it works normally in 'normal' desktop Spaces.
    On entering either LaunchPad or Mission Control it is not possible to zoom in or, more importantly, zoom back out to full screen.
    It is also not possible to move the zoomed area around the full desktop.
    These issues make LaunchPad and Mission Control unusable if entered with any amount of Zoom enabled.
    The workaround appears to be to leave LaunchPad or Mission Control, Zoom fully out and go back in again.
    This is not helpful if you need the zoom mode in order to be able to see your computer screen.
    Anyone found a better workaround?

    Phoned AppleCare tonight - the fix was to nuke the System Preferences preference file and reboot.
    The good news - 'Zoom' now works with the keyboard shortcuts.
    The bad news - the trackpad 'zoom' gesture from Snow Leopard doesn't work in Lion.

Maybe you are looking for

  • AppleTV 2g connected to HDMI to VGA adapter

    I connected my AppleTV to my TV via a HDMI to VGA adapter. On power gives no signal and display a message "Out of Range", to connect another device with the same adapter works properly.

  • Can U set breakpoint within a batch job and look at variables?

    Hello friends, I am trying to solve a problem that occurs within a program / transaction which can only be executed in background. The transaction in question is FPCOPARA and apparently this program cannot be executed in foreground. If I understand w

  • Workflow settings to be taken care of

    Hi ALL, The workflow settings in the SWU3 are not all green...Is it a necessity for them to be all green?? So do I have to regenerate them all to make them green?? -Ken

  • New Shuffle always shuffle the same songs in the same order

    Just bought a shuffle for Marathon training. Loaded about 150 songs on it (about 1/2 full). I go on 1-3 hours runs. It might be my imagination but the shuffle sequence doesn't seem very random. I seem to hear the same songs in the same order each tim

  • Need to move mappings from owb 11.1 to owb10.2

    Hi, A collegue of mine has developed some mappings in owb 11.1 on a 11.1 database. The production server is 10.2 database and owb 10.2 is it possible to move the mappings to the other environemt? Many thanks! /L