Controling image movement in an action?

I know that I can set an advanced action to apply a move effect to an object and I'm fine with the inablity to set the positioning of an image using an action, but is there a way to somehow set the distance or the durration for the effect to take place? I want an object to exit down, but I would only like it to move a small distance and slower than 2 seconds.

My workaround, since the lack of configuration for move effects in advanced actions, is to create a custom effect with the duration (taken into account only relative durations are possible) and the movement path I want to achieve. Then I'll apply that custom effect. See some examples in the first movie of this post:
http://blog.lilybiri.com/reset-effects
BTW: to have a custom effect available in the dropdown list with effects, you first have to apply it once as a time-based effect. At least that was the way in Captivate 6, didn't check if there are changes in 7.
Lilybiri

Similar Messages

  • When I view or upload files (such as on You Tube) there is no longer normal image movement. All action has a "strobe" effect as in slow motion, but audio seems normal. Is this a plug-in problem?

    All of a sudden when I view a file that's been downloaded, or viewed on line, whether in Windows Media, or on You Tube on line site, or Power DVD Play program, the image appears as if it was in a slow motion "strobe" effect, while the audio sounds consistent, (barring the frequent stalls). If I burn a DVD, it has the slow motion strobe effect burnt into the disc as well & is difficult to view on a DVD player. Is this a plug-in problem that has suddenly manifested, and is there a way of getting the system back to it's normal operation??
    == This happened ==
    Every time Firefox opened
    == Since about 2 weeks ago.

    Hello Joe.
    Try disabling all add-ons (that's extensions, plugins and themes, go into ''Tools > Add-ons'') except for Flash and see if the problem persists. If they don't, enable one add-on at a time until you find the problem. If they do, try a new [http://support.mozilla.com/en-US/kb/Managing+profiles Firefox profile] and see if it has the same issues. If it does (make sure other plugins aren't enabled), you need to contact Adobe for support on their Flash plugin ([https://www.mozilla.com/en-US/plugincheck/ updating] it will be the first thing they tell you to do). If it doesn't, please tell me.

  • Update control of movement type is incorrect

    while planning for a material with mrp type pd and strategy group as 20(make to order) i created a customer requirement against which after running mrp the tran md04 showed purchase req for a particular material which was released by me and converted into purchase order by me.
    but when I wanted to do goods receipt against the po generated it is giving me this error in tranc migo.
    ERROR IS     "update control of movement type is incorrect entry (101 X X e b _ v)
    the performance assist screen shows this
    Update control of movement type is incorrect (entry 101 X X E B _ V)
    Message no. M7226
    Diagnosis
    The system could not find entry 101 X X E B _ V in any of the movement type control tables.
    Procedure
    Cancel current processing.
    Contact your system administrator.
    Action to be taken by the system administrator
    Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
    If the entry is missing, proceed as follows:
    For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
    For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.

    Hi
    Check the T code OMJJ for the defining the MVt type also check the error is coming for MVT type 101 then check with mvt type 101 in t code OMJJ and check the updation control there.
    also consult your MM consultant for this error
    Regards
    Anupam Sharma

  • Cannot Control Image Position in RoboHelp When Linking To FM Files

    We are using TCS 3.5 on Windows XP Pro. It has taken a lot of work to get our mapping from FM to RH to work correctly, and we now remain with one outstanding task that I cannot figure out: controlling the position of images in the RoboHelp output.
    The images appear arbitrarily justified left, center, or right in RoboHelp itself and in help outputs. I should also add that this is happening with both structured and unstructured FM files. Typically, the output I'm working with is WebHelp or WebHelp Pro.
    I've turned to the "Object Properties" and "Anchored Frame" pods in FM looking for settings that might be contributing to this behavior, but have not found anything that appears to connect settings there with the image behavior in RH. In the structured FM files, I had some suspicions that complex if/else conditions controlling image position might somehow be contributing to this problem. But the conversion settings in RH don't allow those EDD rules to carry over.
    I also turned to the "Conversion Settings" in RH and played with some of the options for "Images" there, unticking or ticking "Use Distiller to Generate Images" and "Do Not Regenerate Images."
    Our online help now looks pretty clean, since all the styles are mapped, with the exception being these wonky images everywhere.
    I would certainly like to determine the root cause of this behavior, because we're using this FM>RH workflow to create online help systems for hundreds of legacy FM documents that encompass thousands of such images. I want to fix this in the mapping and not touch the original images, if possible
    However, if anyone has the answer regarding the best practice for generally controlling image behavior in structutured and unstructured FM to RH, I would be eager to learn these details as well.
    Thanks in advance,
    Douglas

    I believe it is. And I have had the same problem with tables.
    I made multiple posts about the images trying to describe it in different ways, but all I got were crickets chirping on the forums. I finally called Adobe technical support. Their initial reaction was to show me how image mapping did work correctly with freshly minted FM files and RH project. I had to draw them back into real world scenarios by giving them my source files to recreate the issue. At this point they admitted something was amiss, and one rep even slipped and said it was a “known issue.” They promised to get back to me with a resolution. But despite 4 additional attempts contacting them, and  they now just ignore my e-mails.
    I am very disappointed in the way Adobe has handled this matter, both from a development and a support standpoint. It would do all of us users a world of good if they admitted these flaws in their release notes, and offered possible workarounds. Maybe there is no workaround, in which case it explains why they don’t admit it? But beyond poor software development and bug fixes, I think it’s sad that they don’t follow up on support.
    Adobe seems to assume that tables and images are going to carry over from FM to RH correctly, so you get no fine tune controls, like you do for character and paragraph mapping, and I think this is the crux of the problem.
    I got those tables working in my projects just by dumb luck, but I still have no control over them. The images…they still represent a huge problem for our company. We invested an enormous amount of resources into a RH migration, hoping to continue to use FM. But now we have issues with no apparent resolution. It’s making us regret our decision and reconsider our initial considerations to move to MadCap Flare and/or a component content-management system.
    If you have any luck making headway with the issue, I would love to know more.

  • How could I arrange control images in a report?

    I appended 4 control images to a report using Append Control Image to Report. I wanted to lay two of these images in the first line and the other two in the second line. But the result of my program was one image in one line. (BTW, I did not use any New Report Line). How could I arrange control images?

    Mike is right, unless the images are too wide, the report VIs will put them next to each other on the same line.
    Please find the attached example that appends two charts on the HTML report. Open the .htm file with the web browser. If you make the browser window smaller, the charts will move one below the other.
    Zvezdana S.
    Attachments:
    image.zip ‏13 KB

  • Controlling QT movies in a slide... no controller in KN 3?

    I just got my copy of Keynote 3 hoping two things had made it to this new version:
    1. HTML export... no go.
    2. QT movies' controller available to pause, stop, rewind, ffw,etc. a movie in a presentation... I couldn't do it either....
    Has someone been able to do this? I just can't believe that after so many users asking for this and griping about it Apple did not include it... after all, it seems to me it's a basic function of their own media player...

    are you referring to an option on Export? When I go
    to File/Export the options I get are Quicktime,
    PowerPoint, PDF, Images, and Flash. No HTML... I have
    been using flash as export, but would like something
    similar to the html exporting function present in
    PowerPoint.
    It sounds like you're running Keynote 2.0. Perhaps you launched Keynote from the icon on the dock? I've noticed that the installer leaves the old version of Keynote around. The new version is in a "iWork '06" directory in your applications folder.
    The new export panel is noticeably different from the old. It has a top row with buttons instead of a panel with buttons going down.
    There is the ability to control QuickTime movies
    as
    well, but it would depend upon how large your
    video
    is... certain control schemes are available along
    the
    bottom of the video as it plays, but only if you
    have
    the horizontal room for it. Maybe there's a
    problem
    with your install?
    Can you elaborate on how you do this please? When I
    insert a quicktime movie, it plays automatically upon
    opening that slide with no controls to pause, stop,
    etc. I can have it start on click if I create a
    build-in transition for it, but that's about it.
    Maybe I'm missing something obvious?
    Kyn is right. Check to see which version of Keynote you're running.

  • Movie Clip Button - Action Script issues

    This is a two part question:
    1. I have my movie clip button, "mcAboutus" then inside my
    movie clip I have 5 layers: actions, labels, text, animated
    rollover("mcAboutusover"), animated rolloff("mcAboutusoff"). On the
    labels layer I have _up, _over, _off. On the _up is the text layer,
    on the _over is a movie clip of the animated
    rollover("mcAboutusover") which is 90 frames, and I want to loop as
    long as the mouse is over the text. And the _off has the
    "mcAboutusoff" movie clip.
    So I was able to have the rollover work, but when I roll off
    the rollover animation continues on until the end of the animation.
    I understand it has to do with the fact that it's a movie clip, but
    how do I point it to go into the movie clip and read the animation
    and that on the last frame of the animation I have a
    "gotoAndPlay(1);" to have the animation continue looping as long as
    it's in a rollover state?
    here is the code I have for the _root:
    this.mcAboutus.onRollOver = function() {
    mcAboutus.gotoAndPlay(_over);
    this.mcAboutus.onRollOut = function() {
    mcAboutus.gotoAndPlay(_off);
    The other problem I am having is that once the I have rolled
    over the animation once, the button dies and won't let me rollover
    it again?
    Aside from the "stop();" action in the mcAboutus movie clip
    symbol, I don't have any other actions, should I put items in the
    different movie clips I have set up?
    ALSO.... The reason that I have the main movie clip button,
    and two movie clips residing in the mcBtn is I wanted light rays to
    be glowing from the text, and I was having a hard time getting what
    I wanted from Flash, so I created in After Effects and exported two
    .SWF files. So those .SWF files are the _over and _off states in
    the mcBtn. I am having a very hard time controlling those Movie
    Clips within the main MC Button. Please, any help would be greatly
    appreciated.

    quote:
    Originally posted by:
    kglad
    mcAboutusover should be a movieclip that has your over
    animation and it should have a stop() on its last frame. it should
    be placed on your _over frame in mcAbousus' timeline. you should
    then use:
    Ok, so I have my main timeline, in it has my
    mcAboutus>> then inside that I have three labels. _up which
    has the static text then on frame 5 I have the _over which has the
    keyframe for the mcAboutusover, this animation is 90 frames, then I
    have on frame 10, the _off for the RollOut state, and I have a 10
    frame animation on that one. I still can't get it to continue on
    after the initial rollover, the button still dies down.
    I am going to redo everything in a presentation timeline,
    based on Total Training and see if that helps my problem out any,
    and will get back to you tomorrow with more info. Thanks

  • Control image to report doesn't take all width

    I want to add and print a control to my report, but the control image doesn't take all the width avalaible on my report.
    It's stretched before the margin.
    Take a look to my exemple in attachement
    thanks
    Attachments:
    print_panel.vi ‏38 KB

    Hi,
    I regret to say that the image size is a known bug with the Report Generator. There is currently no workaround for this issue. The image size cannot be greater than a 1� margin on both sides. I hope you�ll be able to work around this. The issue will be fixed in a future version of LV.
    Danny G.
    Applications Engineer
    National Instruments

  • Movement type 122 Error while GI" Update control of movement type is incorr

    Hai Gurus,
             I am having an errow when doing a GI thru movement type 122. i am getting this error message " Update control of movement type is incorrect (entry 122 X X)" Can any one help me how to fix this.
    I did this transaction using MIGO_GI and selecting Goods issued and other as the options with 122 as movement type.
    warm regards.
    mahesh.

    Hi
    Mov type 122 is return to vendor if the qualtiy of Goods  is Poor / Quality
    Regatds
    AKM

  • Update control of movement type incorrect

    Dear all,
    I have run a complete sales cycle from sales order creation to excise invoice generation. However, I have not done the PGI since in our case it is done after the billing. The materials have been dispatched and excise invoice submitted.
    Now, when I am doing PGI it is throwing an error "Update control of movement type incorrect (entry 601 _ X Q L _ V) ". I analysed and found that I have wrongly filled the Requirement Type in the sales order and corresponding entry is missing in OMJJ.
    1- I tried to add this entry but in vain. There is no 'New entry' or 'Copy as' button and hence i could not add..
    2- So, I tried the other alternative i.e. reversing all the documents and changing the RqTy in order. But that can't be done since excise has been sent.
    Is there any other way by which I can do the PGI or atleast capture the goods movement in the system and also update all the relevant documents?
    Plz guide.
    Thanks
    SAPshed

    To do the PGI / PGR , you have to cancel the Excise Invoice through J1IIN and then the Billing Document.Only after this , you can do the PGR or PGI.
    Best Regards,
    Ankur

  • Cluster not saved correctly in Append Control Image to Report VI

    [LV8 with Windows XP]
    I'm using the Append Control Image to Report VI to save the image of a control to Word (the same problem occurs if I save to Excel). This VI seems to work fine with all my controls except clusters. Not all of the contents of the cluster show up in the saved image. I have to expand the edges of the cluster way beyond the cluster contents in order for all the contents to show up in the saved image. Is this a bug? Is there a way to "realign" the contents of the cluster within the boundaries?
    George

    Hi,
    just had a customer with the problem with this cluster picture function and I wrote a little VI that manually gets the picture, resizes it to the cluster and the rest is up to you. The only thing is, that you have to place the "zero point" of the frontpanel in the upper left corner to get the proper image.
    For Users who want to upgrade: This issue is fixed with the next LabVIEW release.
    Best Regards,
     Andreas Pistek
    ~~~ Logic is a systematic method of coming to the wrong conclusion with confidence ~~~
    Attachments:
    better picture.vi ‏19 KB

  • Append Multiple Control Images as a 2-D array/tabl​e ?

    All
    I am trying to generate a report and I wish to have the following pattern:
    Image      Blank      Image
    Blank      Image      Blank
    Image      Blank      Image
    Where I intend to place my control images at "Image" and no image at "Blank"
    I thought I can build a table of control images and append but it accepts only string/numeric tables.
    Is there a easier way to include images into WORD report, equivalent to: me inserting a 3x3 table in a word document, and pasting images in 1st row 1st column, 1st row 3rd colum, 2nd row 2nd colum, 3rd row 1st column, 3rd row 3rd column.
    Please let me know, thanks
    Kudos always welcome for helpful posts

    That example was cool. I wish to add images to table using control reference.
    I tried using the control reference to get image, save as a png and then use it to add images. Is there a way that I can use the control reference to add images to my table directly ?
    Kudos always welcome for helpful posts

  • How do I have an image move with a text box?

    I need to embed an image within a text box so that when I add additional text in the future, the image moves with the text that surrounds it.
    For example, if I have a paragraph of text, then on the following line vertically I have an image, then on the following line another paragraph of text ... When I add additional paragraphs of text above the image, how can I have the image track down to stay between the original two paragraphs of text?

    Thanks Zak!  I figured that out but now have another problem that I just posted. The app keeps locking up when I try to export HTML or upload my site to the server. Please give me any advise on how to handle it.
    Here's my other post:
    Hi,
    I just upgraded to the latest version of Muse. I made a few changes to my site and I'm trying to export the HTML. I've now tried 3 times and the app locks up at 89%. It completes all pages, but locks up there. When I look into the Muse Export folder, there is nothing there. The window reads "Finishing export" but it stays at that point for more than an hour when I finally give up and force quit.
    Any ideas? Anyone else having this issue? Any ideas on how to get my HTML exported successfully?
    Thanks in advance for any help!
    Reply
    27 Views   2 Replies   Latest reply: amchambers,      May 26, 2013 9:23 PMWas this helpful? Yes   No
    Replies
    20 posts
    Sep 19, 2012
    1.amchambers,May 26, 2013 9:18 PM   in reply to amchambers
    Just an update. Previously I was attempting to export HTML to the Muse Export folder on my computer. I described what happened above. Now, I'm trying to publish directly to my FTP site. Its doing basically the same behavior where it exports all desktop pages (189 of them) then it locks up. However, the interesting thing is that when exporting to the Muse Export folder on my computer this said it was 89% complete. When uploading to my server, it says its 59% computer when all pages have been exported. Both options result in the app locking up and never completing the export. I did check my site online to see if the pages were really updated. I made a change to the nav bar on the master so I should see that on every page. It is not showing up online yet even though the app says all 189 pages have been exported. Still looking for help, all advice and ideas will be appreciated! I do want to get my updates online.
    Was this helpful? Yes   No
    Reply|
    Mark as:
    CorrectHelpful
    20 posts
    Sep 19, 2012
    2.amchambers,May 26, 2013 9:23 PM   in reply to amchambers
    Here's what I have when it locks up. It sits like this for hours.

  • I can't append control image to report on 1 page with appended text report

    I am attempting to create a report which is simply header, experiment information, and two graphs of data. I am using a Easy Text Report and Append Control Image to Report. I have successfully printed out this report, but on two separate pages. The header info is on the first page, and the graphs on the second page. This doesn't seem to be a margins problem, as the header is very brief and the graphs aren't that large either. I would like to make this into a one page report.  Any help is greatly appreciated.
    Message Edited by csmrunman on 01-15-2010 10:18 AM

    Nevermind. I neglected to see the Append Report Text.vi. That solved everything.

  • Append control image

    Hi,
    I Have a problem with the append control image to report VI. I Have a Array of clusters that contain 3 numeric indicators and 2 vertical pointer slides. When i try to append this iamge to a report, the picture thats appended downt contain the whole control, and has some weird artefacts. With other controls the append control image to report vi works fine.. Is this a bugin LV 8.0 or am i doing something wrong?
    Thnx
    Bart
    Labview CLD , Engineer/Manager
    Promedes and DSM
    using LV 7.1, 8.0, 8.2, 8.5 and 2009 SP1
    http://www.promedes.nl

    Ok here is an example, the cluster is being appended in the subvi
    Labview CLD , Engineer/Manager
    Promedes and DSM
    using LV 7.1, 8.0, 8.2, 8.5 and 2009 SP1
    http://www.promedes.nl
    Attachments:
    subvi.vi ‏35 KB
    problem.vi ‏14 KB

Maybe you are looking for