Controling the PM ORDER tabs and subscreen

Hello
We are trying to customize PM ORDER.
We looked for a way in which we could control the appearance of tabs and subscreens in customization and found none.
We found that ther is a BADI IWO1_SCREEN_MODIF that seems to be for that purpose.
Is it the only way or there is a way like when customizing notification.
Second question is about the notification fields when creating a PM ORDER that creates a notification. We have not found any way of controling the tabs and subscreens.
Best regards
Shlomo Assouline

Hi Shlomo Assouline,
GuiXT is a SAP Partner software integrated with Standard SAP.
This helps in Changing the Field names, Location, Screen Layout etc with out any program and with simple syntax.
It gives amazing results if done properly. It has a big drawback too. It is PC specific & cannot be controlled based on who logins etc. But if you want same screen through out your Business the small TXT file created can be copied into other PC (personal Computer) as well.
For detailed information on this see the link www.synactive.net. It has some Tutorials too there.
The path in SAP to activate it is Click on "Customise Local Layout" the button adjacent to Help button after you logon.
Under that you will see "Activate GuiXT". From there on you can proceed. When you do not require switch it off as it is Toggle Button.
Regards,
MLN Prasad

Similar Messages

Controlling the space between label and Input field in SELECT-OPTION

Hi ,
I am using WDR_SELECT_OPTIONS as a used component in order to dynamically generate the Select option in my WD Component.
Can any one tell me if there is a way to control the spacing between Label and Input field? This is because rest of the UI elements are in one particular order but for this dynamically generated UI.
Please help me.
Thanks,
Kavitha

Hi Kavitha,
The label is required for accessibility reasons. It's not possible to remove it and to use your own label from outside the component to point to it. Labels cannot point to targets across views (and hence acress component) boundaries.
Best regards,
Thomas

How do I get the Questions to show in the 'View Responses' TAB, and then show up in the Summary Report?

How do I get the Questions to show in the 'View Responses' TAB, and then show up in the Summary Report?

There are more than one Applications folders. At the root level of your system is an Applications folder for all users, where most installations go. Every user, including you, also has a separat Applications folder.
Check all of them.

A report which shows the purchase order MM and the linked vendor invoice

Hi All,
I wonder if ther's a SAP standard report which shows the purchase order MM and the linked vendor invoice (the FI document) with the Net due date.
Could anyone help me?
Thanks
G.Rossi

Hi,
ME80FN with PO History View
ME2N with Scope of List "ALLES"

Table containeing both the purchase order number and the sales order number

hi all!!!
what is table that contains both the purchase order number and sales order number corresponding to that purchase order number.
Moderator message: please search before posting.
Edited by: Thomas Zloch on Jan 31, 2012

Hi Sunny,
Yes they are same. You will be creating a purchase order in ME21n. After creating purchase order you will shown a number for that order.
Reward points if useful.
Thanks,
Swamy Kunche

Is the purchase order number and purchase document numer both are same

is the purchase order number and purchase document numer both are same or different?
thanks.

Hi Sunny,
Yes they are same. You will be creating a purchase order in ME21n. After creating purchase order you will shown a number for that order.
Reward points if useful.
Thanks,
Swamy Kunche

How to control the R/3 prod and BW prod when diff teams works at the same

Hi Friends,
I would like to check with you guys, I'm working for support project at the same time different teams are using same server.
If the different teams are being used same Master data as well, We don't know what are the teams developing which are the objects.
Now the problem is when we check in the BW production every time having probem e.g: Inactive Masterdata Info Object, ODS replication etc.
I would like to ask you guys, Normally this being the case, How we can control the R/3 Production and BW production.
Can anybody give some valuable inputs...if it's applicable we'll implements in my project as well.
SIRI

Hi Siri
If am correct , your concern is when a development team sends some objects to production as part of their project, you see discrepencies of some master data being inactive .
Your Question is,How to coordinate those?
You sais you are working for Support means Data loads, then development team also works for the same server moving to Prod. then obviously there should be soem integration of all the teams for the work going live in production, maintain a call with all your team when and all objects are moving to Production and check if any impact of those objects for you when they are moved to Prod.
But all the time objects moved to prod will be supported by the development team for short period for its stabilization there.
Hope you need to have coordination with the team .......
Regards

How the prodution order start and finis dates are changeing...?

Dear friends,
It was observed that one of my client's production order start and finish dates are changing frequently.
No user is claiming the responsibility, I feel very dificult to to find out who did the changes.
When I observed, it is happening for orders if we Revert the Teco, and that to for those orders which doesn't have the sale order assignment.
and some times it is not happenign for even for the orders which does not have the sale order assignment also.
Here it is having Forward type Sheduling.
Please help me how and when , the prodcuction orders start and finish dates will get changed.

Dear RS,
Plz check in AUT10, by giving t-code CO02 for order changes
in AUT10, u can track user id also
this may help you to some extent
Regards
kumar
Edited by: kumar kumar on Sep 17, 2009 8:32 AM

How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated

Hello,
How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated and since it updated it reduced the space. Now the space is too thin which makes it more difficult to move the open window frame around when I need to grab something from Desktop. Image attached.

In the image, see how thin the space is right above the tab? It was much wider before Firefox update so if any know how to make it wider again, please let me know. Thank you
''troyable7 [[#question-1058550|said]]''
<blockquote>
Hello,
How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated and since it updated it reduced the space. Now the space is too thin which makes it more difficult to move the open window frame around when I need to grab something from Desktop. Image attached.
</blockquote>
In the image, see how thin the space is right above the tab? It was much wider before Firefox update so if any know how to make it wider again, please let me know. Thank you

How to cancel the sales order - header and line status are in Entered Stage

Dears,
I have some sales order to be cancelled in which the header and line status are in *"Entered"*. I am not able to cancel these sales order.
Also note that these orders are for maintenance service.Once i book these orders the lines will change to closed status.
So it is not possible to book and cancel the lines.
Kindly me to resolve this.

926530 wrote:
Boss,
If i do Action-->cancel on header, it just makes the qty to zero.But the header and line status still showing as entered.It will not cancel the order.
The problem for me is that these lines are coming in my monthly reports. This is what your question says...be more specific as what is your issue..which in turn is your problem
How to cancel the sales order - header and line status are in Entered Stage
Coming to your Action-->cancel...as far as i know ...the header status will change to canceled..
unless until you have some processing constraints in place...which is stopping you...
HTH
Mahendra

Whether the NI step controller can control the digital servo driver and motor

I want to you can help me confirm whether the NI step controller can control the digital servo driver and motor.If can,what is the differents between servo controller and step controller to control servo motor?Thank you so much!
Best regards

The PCI/PXI/FW 7344 high precision controller can be used to control both steppers and servo motors. The older PC Step controllers are made for stepper only control. The difference in the two control types is with stepper control, the controller outputs two digital signals that control the step and direction of the motor. The drive uses these digital signals to energize the stepper phases and commutate the motor. In a servo system, the controller outputs a -10 to 10 Volt analog signal that the drive then uses to output the appropriate current to the motor which is proportional to torque.
You can get more information from the following website:
http://zone.ni.com/devzone/devzone.nsf/webcategories/69771825AE23E98E86256786000BEA02?opendocument
Please let u
s know if you have any further questions.
Regards,
Andy Bell
Applications Engineer
National Instruments

I am trying to update the apps in my MacBook Air but even though I am signed in with my apple ID an email of a person I don't know appears in the Apple ID tab and I can't change it

I am trying to update the apps in my computer, but even though I am signed in with my Apple ID in the App Store, the tab where I am supposed to enter my Apple ID to to update it, someone else's email apprear. What do I do?

You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store alert. For example, the App Store may prompt you to update "Angry Birds" or "Twitter," but the hacked app may be something else entirely. Don't make any assumptions about which app you're looking for. To find it, you must carry out a systematic search with Spotlight.
1. Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard by pressing the key combination command-C.
2. In the Finder, press command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
Other...
A sheet will drop down. In that sheet, select
Raw Query
as the criterion, then click OK or press return.
Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
4. The search window will now show all the App Store products that are installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the apps in the Spotlight search results is not among your purchases in the App Store. Move each such item to the Trash, after quitting it if it's running. You may be prompted for your administrator password. Empty the Trash.
Quit and relaunch the App Store. Test.
If you find these instructions confusing, ask for an alternative method.

I want to open new tabs with other ones open. So I click the + button for tabs and it does nothing. I right click and click new tab and still nothing. How do I get that feature to work again.

I click the + button to open a new tab and it doesn't do anything, not even open a new tab. I try to right click and open a new tab and still don't work. But if I right click a link and click open in new tab it will work. How do I get to open my tabs again with the + button?

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

How to Control the Sorting Order of iPhone Contacts from Outlook?

In a series of editing steps we've loaded ca. 1,900 personal and business contacts from Outlook into a 1st gen iPhone with 2.0.1 software on it. To our surprise we found that while most of the entries were listed and sorted by company, certain entries were listed and sorted by the person's name. It looked random and there didn't seem to be any way to control it on the iPhone.
While troubleshooting the problem we synced up the iPhone with an empty Address Book on a MacBook Pro and found that the sort order flag was indeed set differently on these entries. When we changed the sorting flag of a contact in the Mac's Address Book to "Company" it also changed on the iPhone after the next sync.
Problem: In our business environment it is impossible to switch to Macs for contact administration. We need to do it from Outlook. This is one of several features needed for the adoption of iPhones.
Question: Is there a way to control this flag on the individual iPhone contact entries from Outlook Contacts?

Well, I think we figured it out.
Outlook doesn't offer a sorting flag on person or company name. Instead it uses a separate "File As" string. The problem with our contacts was that this "File As" string was frequently edited to be something else than exactly the personal or company name, e.g. it was set to an abbreviated company name. Once we set the "File As" to any of the defaults offered, i.e. person or company name, the sorting flag in iPhone was properly set through the synchronization.
Obviously, the application logic compares the content of these fields in Outlook and decides how to set the flag. If it can't find the company name in "File As" it defaults to person.
This was an expensive holdup for us. It cost us 2 man days to figure it out. Is there any place where such application logic is described?

Merging the Production order number and operation number into sequential no

Hi,
I am creating the production order using the Tcodes Co01 or co10 and my requirement is that after creating the production number and then when I open that one in the change mode using co02 Tcode the sequential number which is present in the assignment tab should come as a concatenation of order number and operation number .
Thanks for the help in advance.
Regards,
Venkat.

dear,
this depends on the user buffer set.
for each user there will be a buffer set in when logeed in and create a production order.
depending on the saving the production order saving time there may be a situation as you have now.
discuss with your basis people and under stand the user buffer of numer for production order.

Controling the PM ORDER tabs and subscreen

Similar Messages

Maybe you are looking for