Controlled Access to device password - How do I disable it?

Really hoping someone can help,
I set up the controlled access to device password, however earlier today it rejected the password even though I had entered it correctly. On the last attempt it told me that failure would wipe device of all data! My network provider told me that if I entered it wrong on a final attempt it would wipe and block the phone and the only way to have phone unblocked would be to have it sent away! As a few hours had passed and I was unable to use the phone I took the chance of entering the password again and it worked.
However, when I went to disable the password it would not allow me to!
Is there any way to disable it as I mostly use my phone for business I can not afford to have it blocked and/or wiped!

Doesn't sound like it. Your employer has put that in place. You can change the password, but you cannot remove it.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Similar Messages

I forgot device password, how can I enter the device now?

I have forgotten my password for the airport. How can I reset the password so I can enter the time capsule?

Press the reset button. Use one second.. it is called soft reset.. all passwords revert to factory.. ie public for the TC admin.. nothing for wireless. So you can get in and fix it.
Remember that in the future.. because passwords are more of a security blanket in the TC than a really secure device.. anyone who has physical access to change passwords can do so in a moment.

HT1212 my ipad is giving me a message stating that it is disabled since my daughter entered the wrong password in. I know the password how do i disable it?

ipad mini is giving message that it is disabled. daughter entered incorrect password many times. I know password how do I regain access to enter correct password?

The following covers all the options: Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled

Controlling Access to devices using ACS

I am using ACS 3.2 and on the NAR section,I have used a wildcard (*) to define all the network devices on my network.All my users are in one group. However,I have just realised there is the need for me to create another group and put some users in that group so they only have access to some routers and switches and not all as define by the wildcard.
How do I achieve this goal.?

Under NAR select the Per Group Defined Network Access Restrictions.
Select the AAA clients you want the group to access.
Use the wildcard mask in the port and the address field.
You can also group the devices which you want to give access under a seperate NDG and in the NAR give permission to only this NDG for the group. In this way you may need not add individual AAA clients
HTH, rate if it does
Narayan

How do I disable guest access in the advanced web controls? E2000

Due to cisco connect not connecting and my rouer having some problems I have reset it and gone straight into the advanced web control panel. I have everything set up and running, but I see no way to turn off guest access. I do not want any "guests" to be able to access my E2000 router, how do I disable that in the advanced web control panel?

sabertooth is correct. The Guest network is managed by Cisco connect software only.
You can reset the router and reconfigure it manually.
Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it manually.

How can I disable remote access connection window ?

When I try to connect (via TCP/IP) with a VI in another PC (in my local network) it appears the remote access connection window.
How can I disable this (programmatically if possible) ?
A big thanks for your answers.
Linus

Randy,
attached the image of the Remote Access Connection Window that appears when I connect to the VI.
It is the Operating System (Windows) classical panel for Remote Access connections using a modem.
Many thanks.
Linus
Attachments:
Remote_Access.jpg ‏22 KB

How do you disable the feature to 'keep iMessage conversations running between two devices'?

I have 2 apple devices- an iPhone 4 and an iPad 2. When I set my iPad up and set iMessage up set it offered me the option to keep iMessage conversations running between the two devices, and i pressed yes. I now cannot stand this feature because every time I recieve an iMessage, I get two alerts, one on each device. How do you disable it?

Hi DeltaNomad,
Welcome to the Support Communities!
You can disable the Substitutions feature completely, or add words you frequently use to the substitutions list. See this information from the Pages User Guide:
Replace text automatically - Pages Help for Mac
http://help.apple.com/pages/mac/5.1/#/tanca15d8a79
When Text Replacement is turned on for the document, a checkmark appears next to Text Replacement in the Substitutions menu. You can deselect Text Replacement to turn it off, but existing text won’t change unless you select the text, and then follow the steps above.
Choose Edit > Substitutions > Show Substitutions (from the Edit menu at the top of your computer screen).
In the Substitutions window, select the Text Replacement checkbox, then click Text Preferences.
Click Text, click the plus sign, then type the text you want to replace (such as “teh”) in the Replace column.
Type the word you want to replace it with (such as “the”) in the With column.
Close the window when you’re done editing substitutions.
Click a button to replace all occurrences of the replacement text in the document, or only in the selected text.
Cheers,
- Judy

How can i disable imessage on my notebook?

I'm very sick of receiving text messages on every device. How can I disable imessage on my macbook pro so I don't receive texts that I wish to receive only on my phone?

Welcome to Apple Support Communities
If you do not want to receive your text messages on your Mac, open Messages, go to Messages menu (in the menu bar) > Preferences > Accounts, choose your iMessage account and untick your phone number or disable your account

How do you set a security password to control access to an external hard drive?

how do you set a security password to control access to an external hard drive?

The only way to reliably protect data, especially on an external hard drive, is to encrypt it. Permissions don't have to be respected. One way to encrypt data is to create an encrypted sparse bundle disk image with Disk Utility. See:
http://support.apple.com/kb/HT1578
(Be sure to use the 256-bit encryption.)
Alternately, you could use some whole-disk encryption, though I have no experience with any of the software for doing that. You could try the following:
http://www.truecrypt.org/
I don't know that I would recommend the product being advertised inappropriately by keynesis.

I have verified my new email address as my Apple ID but my IOS devices keep asking me to sign in to my previous email/Apple ID but have no access to it. How can I stop or change this?

I have verified my new email address as my Apple ID but my IOS devices keep asking me to sign in to my previous email/Apple ID but have no access to it. How can I stop or change this?

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Figuring out how to access a device using Windows.Devices.HumanInterfaceDevice?

Before I start, I would like to share this link I used to access windows RT libraries from Desktop applications (only the ones stated in MSDN documentation that are accessible from desktop applications):
http://blogs.msdn.com/b/cdndevs/archive/2013/10/02/using-windows-8-winrt-apis-in-net-desktop-applications.aspx .
After following the above instructions you can import some of the windows RT libraries in references. I have been trying to use the Windows.Devices.HumanInterfaceDevice library. I think my UsagePage and UsageId are off though. I am wondering
if someone good in hex can translate them from my report descriptor. I already have the VID and PID (this should be enough along with the path if I called write file or some of the other win32/OS api's). Here's the code I am using in VB.NET:
Public Class VirtualMouseDeviceOpen
Class Enumeration
' Enumerate HID devices
Public Async Function EnumerateHidDevices() As Task
Dim vendorId As UInt32 = &HBEEF
Dim productId As UInt32 = &HFEED
Dim usagePage As UInt32 = &HFF
Dim usageId As UInt32 = &H1
' Create a selector that gets a HID device using VID/PID and a
' VendorDefined usage
Dim selector As String = HidDevice.GetDeviceSelector(usagePage, usageId, vendorId, productId)
' Enumerate devices using the selector
Dim devices As Windows.Foundation.IAsyncOperation(Of Windows.Devices.Enumeration.DeviceInformationCollection) = DeviceInformation.FindAllAsync(selector)
Dim count As Integer = devices.GetResults.Count
If count > 0 Then
' Open the target HID device
' At this point the device is available to communicate with
' So we can send/receive HID reports from it or
' query it for control descriptions
Dim device As HidDevice = HidDevice.FromIdAsync(devices.GetResults.ElementAt(0).Id, FileAccessMode.ReadWrite)
Await Vendor.ReadWriteToHidDevice(device)
Else
' There were no HID devices that met the selector criteria
MsgBox("MUTT HID device not found!", MsgBoxStyle.Exclamation)
End If
End Function
Class Vendor
Public Shared Async Function ReadWriteToHidDevice(device As HidDevice) As Task
If device IsNot Nothing Then
' construct a HID output report to send to the device
Dim outReport As HidOutputReport = device.CreateOutputReport()
' Initialize the data buffer and fill it in
Dim buffer As Byte() = New Byte() {10, 20, 30, 40}
Dim dataWriter As New DataWriter()
dataWriter.WriteBytes(buffer)
outReport.Data = dataWriter.DetachBuffer()
' Send the output report asynchronously
Dim a As Windows.Foundation.IAsyncOperation(Of UInteger) = device.SendOutputReportAsync(outReport)
' Sent output report successfully
' Now lets try read an input report
Dim inReport As HidInputReport = device.GetInputReportAsync()
If inReport IsNot Nothing Then
Dim id As UInt16 = inReport.Id
Dim bytes = New Byte(3) {}
Dim dataReader__1 As DataReader = DataReader.FromBuffer(inReport.Data)
dataReader__1.ReadBytes(bytes)
Else
MsgBox("Invalid input report received")
End If
Else
MsgBox("device is NULL")
End If
End Function
End Class
End Class
Here's my report descriptor to avoid scrimmaging through everything trying to find it:
HID_REPORT_DESCRIPTOR G_DefaultReportDescriptor[] = {
0x06,0x00, 0xFF, // USAGE_PAGE (Vender Defined Usage Page)
0x09,0x01, // USAGE (Vendor Usage 0x01)
0xA1,0x01, // COLLECTION (Application)
0x85,CONTROL_FEATURE_REPORT_ID, // REPORT_ID (1)
0x09,0x01, // USAGE (Vendor Usage 0x01)
0x15,0x00, // LOGICAL_MINIMUM(0)
0x26,0xff, 0x00, // LOGICAL_MAXIMUM(255)
0x75,0x08, // REPORT_SIZE (0x08)
//0x95,FEATURE_REPORT_SIZE_CB, // REPORT_COUNT
0x96,(FEATURE_REPORT_SIZE_CB & 0xff), (FEATURE_REPORT_SIZE_CB >> 8), // REPORT_COUNT
0xB1,0x00, // FEATURE (Data,Ary,Abs)
0x09,0x01, // USAGE (Vendor Usage 0x01)
0x75,0x08, // REPORT_SIZE (0x08)
//0x95,INPUT_REPORT_SIZE_CB, // REPORT_COUNT
0x96,(INPUT_REPORT_SIZE_CB & 0xff), (INPUT_REPORT_SIZE_CB >> 8), // REPORT_COUNT
0x81,0x00, // INPUT (Data,Ary,Abs)
0x09,0x01, // USAGE (Vendor Usage 0x01)
0x75,0x08, // REPORT_SIZE (0x08)
//0x95,OUTPUT_REPORT_SIZE_CB, // REPORT_COUNT
0x96,(OUTPUT_REPORT_SIZE_CB & 0xff), (OUTPUT_REPORT_SIZE_CB >> 8), // REPORT_COUNT
0x91,0x00, // OUTPUT (Data,Ary,Abs)
0xC0, // END_COLLECTION
0x05, 0x01, // USAGE_PAGE (Generic Desktop)
0x09, 0x02, // USAGE (Mouse)
0xa1, 0x01, // COLLECTION (Application)
0x85, 0x02, // REPORT_ID (2)
0x09, 0x01, // USAGE (Pointer)
0xa1, 0x00, // COLLECTION (Physical)
0x05, 0x09, // USAGE_PAGE (Button)
0x19, 0x01, // USAGE_MINIMUM (Button 1)
0x29, 0x03, // USAGE_MAXIMUM (Button 3)
0x15, 0x00, // LOGICAL_MINIMUM (0)
0x25, 0x01, // LOGICAL_MAXIMUM (1)
0x95, 0x03, // REPORT_COUNT (3)
0x75, 0x01, // REPORT_SIZE (1)
0x81, 0x02, // INPUT (Data,Var,Abs)
0x95, 0x01, // REPORT_COUNT (1)
0x75, 0x05, // REPORT_SIZE (5)
0x81, 0x03, // INPUT (Cnst,Var,Abs)
0x05, 0x01, // USAGE_PAGE (Generic Desktop)
0x09, 0x30, // USAGE (X)
0x09, 0x31, // USAGE (Y)
0x15, 0x81, // LOGICAL_MINIMUM (-127)
0x25, 0x7f, // LOGICAL_MAXIMUM (127)
0x75, 0x08, // REPORT_SIZE (8)
0x95, 0x02, // REPORT_COUNT (2)
0x81, 0x06, // INPUT (Data,Var,Rel)
0xc0, // END_COLLECTION
0xc0 // END_COLLECTION
My UsageId is the first Usage Hex value in the report descriptor I believe (I am still a little confused too). My UsagePage is the hex values in the first Usage_Page in the report descriptor.
Note: the problem with the VB.NET code is that it returns 0 on the count above which means it did not find a device using my criteria.
Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - Sherlock Holmes. speak softly and carry a big stick - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to suffering - Yoda. Blog -
http://www.computerprofessions.us

Before I start, I would like to share this link I used to access windows RT libraries from Desktop applications (only the ones stated in MSDN documentation that are accessible from desktop applications):
http://blogs.msdn.com/b/cdndevs/archive/2013/10/02/using-windows-8-winrt-apis-in-net-desktop-applications.aspx .
After following the above instructions you can import some of the windows RT libraries in references. I have been trying to use the Windows.Devices.HumanInterfaceDevice library. I think my UsagePage and UsageId are off though. I am wondering
if someone good in hex can translate them from my report descriptor. I already have the VID and PID (this should be enough along with the path if I called write file or some of the other win32/OS api's). Here's the code I am using in VB.NET:
Public Class VirtualMouseDeviceOpen
Class Enumeration
' Enumerate HID devices
Public Async Function EnumerateHidDevices() As Task
Dim vendorId As UInt32 = &HBEEF
Dim productId As UInt32 = &HFEED
Dim usagePage As UInt32 = &HFF
Dim usageId As UInt32 = &H1
' Create a selector that gets a HID device using VID/PID and a
' VendorDefined usage
Dim selector As String = HidDevice.GetDeviceSelector(usagePage, usageId, vendorId, productId)
' Enumerate devices using the selector
Dim devices As Windows.Foundation.IAsyncOperation(Of Windows.Devices.Enumeration.DeviceInformationCollection) = DeviceInformation.FindAllAsync(selector)
Dim count As Integer = devices.GetResults.Count
If count > 0 Then
' Open the target HID device
' At this point the device is available to communicate with
' So we can send/receive HID reports from it or
' query it for control descriptions
Dim device As HidDevice = HidDevice.FromIdAsync(devices.GetResults.ElementAt(0).Id, FileAccessMode.ReadWrite)
Await Vendor.ReadWriteToHidDevice(device)
Else
' There were no HID devices that met the selector criteria
MsgBox("MUTT HID device not found!", MsgBoxStyle.Exclamation)
End If
End Function
Class Vendor
Public Shared Async Function ReadWriteToHidDevice(device As HidDevice) As Task
If device IsNot Nothing Then
' construct a HID output report to send to the device
Dim outReport As HidOutputReport = device.CreateOutputReport()
' Initialize the data buffer and fill it in
Dim buffer As Byte() = New Byte() {10, 20, 30, 40}
Dim dataWriter As New DataWriter()
dataWriter.WriteBytes(buffer)
outReport.Data = dataWriter.DetachBuffer()
' Send the output report asynchronously
Dim a As Windows.Foundation.IAsyncOperation(Of UInteger) = device.SendOutputReportAsync(outReport)
' Sent output report successfully
' Now lets try read an input report
Dim inReport As HidInputReport = device.GetInputReportAsync()
If inReport IsNot Nothing Then
Dim id As UInt16 = inReport.Id
Dim bytes = New Byte(3) {}
Dim dataReader__1 As DataReader = DataReader.FromBuffer(inReport.Data)
dataReader__1.ReadBytes(bytes)
Else
MsgBox("Invalid input report received")
End If
Else
MsgBox("device is NULL")
End If
End Function
End Class
End Class
Here's my report descriptor to avoid scrimmaging through everything trying to find it:
HID_REPORT_DESCRIPTOR G_DefaultReportDescriptor[] = {
0x06,0x00, 0xFF, // USAGE_PAGE (Vender Defined Usage Page)
0x09,0x01, // USAGE (Vendor Usage 0x01)
0xA1,0x01, // COLLECTION (Application)
0x85,CONTROL_FEATURE_REPORT_ID, // REPORT_ID (1)
0x09,0x01, // USAGE (Vendor Usage 0x01)
0x15,0x00, // LOGICAL_MINIMUM(0)
0x26,0xff, 0x00, // LOGICAL_MAXIMUM(255)
0x75,0x08, // REPORT_SIZE (0x08)
//0x95,FEATURE_REPORT_SIZE_CB, // REPORT_COUNT
0x96,(FEATURE_REPORT_SIZE_CB & 0xff), (FEATURE_REPORT_SIZE_CB >> 8), // REPORT_COUNT
0xB1,0x00, // FEATURE (Data,Ary,Abs)
0x09,0x01, // USAGE (Vendor Usage 0x01)
0x75,0x08, // REPORT_SIZE (0x08)
//0x95,INPUT_REPORT_SIZE_CB, // REPORT_COUNT
0x96,(INPUT_REPORT_SIZE_CB & 0xff), (INPUT_REPORT_SIZE_CB >> 8), // REPORT_COUNT
0x81,0x00, // INPUT (Data,Ary,Abs)
0x09,0x01, // USAGE (Vendor Usage 0x01)
0x75,0x08, // REPORT_SIZE (0x08)
//0x95,OUTPUT_REPORT_SIZE_CB, // REPORT_COUNT
0x96,(OUTPUT_REPORT_SIZE_CB & 0xff), (OUTPUT_REPORT_SIZE_CB >> 8), // REPORT_COUNT
0x91,0x00, // OUTPUT (Data,Ary,Abs)
0xC0, // END_COLLECTION
0x05, 0x01, // USAGE_PAGE (Generic Desktop)
0x09, 0x02, // USAGE (Mouse)
0xa1, 0x01, // COLLECTION (Application)
0x85, 0x02, // REPORT_ID (2)
0x09, 0x01, // USAGE (Pointer)
0xa1, 0x00, // COLLECTION (Physical)
0x05, 0x09, // USAGE_PAGE (Button)
0x19, 0x01, // USAGE_MINIMUM (Button 1)
0x29, 0x03, // USAGE_MAXIMUM (Button 3)
0x15, 0x00, // LOGICAL_MINIMUM (0)
0x25, 0x01, // LOGICAL_MAXIMUM (1)
0x95, 0x03, // REPORT_COUNT (3)
0x75, 0x01, // REPORT_SIZE (1)
0x81, 0x02, // INPUT (Data,Var,Abs)
0x95, 0x01, // REPORT_COUNT (1)
0x75, 0x05, // REPORT_SIZE (5)
0x81, 0x03, // INPUT (Cnst,Var,Abs)
0x05, 0x01, // USAGE_PAGE (Generic Desktop)
0x09, 0x30, // USAGE (X)
0x09, 0x31, // USAGE (Y)
0x15, 0x81, // LOGICAL_MINIMUM (-127)
0x25, 0x7f, // LOGICAL_MAXIMUM (127)
0x75, 0x08, // REPORT_SIZE (8)
0x95, 0x02, // REPORT_COUNT (2)
0x81, 0x06, // INPUT (Data,Var,Rel)
0xc0, // END_COLLECTION
0xc0 // END_COLLECTION
My UsageId is the first Usage Hex value in the report descriptor I believe (I am still a little confused too). My UsagePage is the hex values in the first Usage_Page in the report descriptor.
Note: the problem with the VB.NET code is that it returns 0 on the count above which means it did not find a device using my criteria.
Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - Sherlock Holmes. speak softly and carry a big stick - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to suffering - Yoda. Blog -
http://www.computerprofessions.us
I forgot anyone wanting a picture of what the device hierarchy looks like in control panel here it is (HID compliant vendor device is the first one in the report descriptor above I want to access and then the mouse device):
Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - Sherlock Holmes. speak softly and carry a big stick - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to suffering - Yoda. Blog -
http://www.computerprofessions.us

Do not have access to device on which keychain code was sent. How to enable i keychainfor my phone?

i do not have access to device on which ikeychain code was sent. So how to enable it on my phone

Sorry no, if you don't knnow the encrypted password, then you can't use that backjup.

How to access the stored password list of N9 nativ...

How to access the stored password list of N9 native browser?

most everything should be listed here.
there was a way to see the website data and stored information, but not the passwords. they were ************
you were only able to delete the login information, and unfortunately, since i have not used the device in so long, have forgotten the language.
so you will have to dig a bit.
it was a command that you would enter into the browser address bar.
if it comes to me i will repost, but for now...check here.
http://talk.maemo.org/showpost.php?p=1104892&postcount=1

I see "imac-54f9d5" under the "Shared" heading in my finder. I am not connected to any printers or other Mac devices. Is it possible that someone is remotely accessing my system? How can I figure out what this is?

I see "imac-54f9d5" under the "Shared" heading in my finder. I am not connected to any printers or other Mac devices. Is it possible that someone is remotely accessing my system? How can I figure out what this is?

is it your imac?
is it your your router's name?
are you by any chance connected to another wifi router then your own because the other one was open and not password protected?

If i forget the ID and password how can i open my device ?

i forget the Apple ID and its password ,, how can i open my device ?

You can't. Both are required for access. Find My iPhone Activation Lock. If you are the original owner and have written proof of purchase then you could ask for help at the Apple Store.

Controlled Access to device password - How do I disable it?

Similar Messages

Maybe you are looking for