Controlled messages send from WLC to Syslog

Customer' WLC4402 S/W is 4.1.0171
they do not uncontrolled messages send to their Syslog.I already set messages log level=critical failure, but uncontrolled messages is still received on the Syslog.

You can always try each one. Here is a link
http://www.cisco.com/en/US/products/ps6307/products_configuration_example09186a00809a2d76.shtml
Local 7 is default
Sent from Cisco Technical Support iPhone App

Similar Messages

  • Message Send from ABAP Proxy implemented in XI Server ABAP Stack

    Hello everyone,
    I have a question and I'm not sure of this is an ABAP question but I'll try here and try to find some information on ABAP forums and weblogs, I need to send a XML message to the XI pipeline from an ABAP Server Proxy implemented in the same XI ABAP Stack Server, why I need this? well actually I can't find a way to do it in a BPM so I'm going to try to set the logic for this message send in the ABAP Stack, so do you know like a Function Module so I can send a message to the pipeline but I need the message to be set as Scheduled, I'll try ABAP Forums and Weblogs too, thanks in advance.
    regards,
    julio

    Hi
    You can schedule your program as a background Job SM36. Please check the transaction. You will have to set your ABAP program as the job STEP (if you probably have selection screen for your report then you will also need a variant for your report).
    Do schedule your program as a 'Periodic Job' and your personal period (daily/hourly).
    After you save your settings you can also monitor your job (ABAP Program) from the same transaction or even from CCMS if you like.
    Thanks
    Gaurav

  • Initiative message sending from server to MIDP client.

    Hi, guys,
    I wanna build a c/s application using CLDC and MIDP, the problem is the expected system should have a capability of making server and client could communicate in demand, i.e. let either server or client send initiative messages to the opposite side.
    But currently, HTTP support couldn't match such requirement, so anybody could raise a good idea?
    Thanks a lot!

    [xiaxing],
    You might find this feature that you are looking for in the next MIDP 2.0 specification when it supports "Push Architecture". This feature allows the MIDlet to request the handset to listen for certain data or connections and launch the MIDlet or give it connection when listener receives the correct data or connection.
    You can access the details of the JSR for the MIDP 2.0 specification from:
    http://jcp.org/jsr/detail/118.jsp
    HTH.
    Rgds,
    Allen Lai
    Developer Technical Support
    Sun Microsystems
    http://access1.sun.com

  • Reporting of SMS messages send from SBWP

    Hi Experts
    All users are currently able to send sms messages from SBWP using Pager function.  I am in need of a report or table were I can determine who and how many sms messages are being send.
    Regards

    Hi,
    Try with tcode SOST.
    Regards,
    Eduardo

  • Messages sent from secondary mailboxes getting stuck in Outbox.

    I have two users who recently began having a problem with messages sent from secondary mailboxes getting stuck in their Outbox.
    The details:
    We're using Exchange Server 2010 version 14.03.0224.002
    Windows 7 Professional Service Pack 1
    Office 2010 version 14.0.7140.5002 (32-bit)
    The user in question whom I will call Jane has full rights and send as rights to the department's mailbox (which I will call "Common"), however, the Outlook profile on her computer is setup so that Common is the default mailbox
    and Jane is a secondary mailbox. 
    The problem is that in the last few weeks messages send from Jane get stuck in the Outbox.  We have recreated Jane's Outlook profile on her computer which resolves the problem, but only for a day or two before it begins to happen again. 
    Additional info: Jane logs into her computer and her email as herself. As stated above she has full rights and send as rights to Common. Common also has full rights and send as rights to Jane's email. 
    We have used this setup successfully for many years for several of our users. The problem started with one user a few weeks ago and now a second user who accesses a different Common mailbox is having the same problem.  Both systems have been
    thoroughly checked for viruses and malware, etc.
    Anybody got any ideas?

    The same thing happens to me. Really irritating. However, even after rebooting, the mail is sometimes stuck in the outbox. Anybody have a solution?

  • Problem in message sending of nokia 6080

    my sim card is unable to allow message sending from most of the nokia 6080 mobile phones.but,my sim can send messages from all other mobile phones in the usual manner.i have sent my cell to one of the nokia care centres(job sheet number:319434038/070519/20
    ).what they are telling me is that the phone is working fine with their sim card.so i am in a dual situation----my cell doesnt respond to my sim,but my sim is working with other phones.in such a one to one sim-mobile intercompatibility problem,what am i supposed to do?my warranty is still on.can i get a new cell in return?please help.
    EDIT: Removed IMEIMessage Edited by ajak on 29-May-2007 02:36 PM

    Well u must have moved ur settings.. i would sugest a format or factory reset.. its only the problem that u must have changed ur messeage no or something..
    NeVeR brEaK a heArt......!!!!
    =========================

  • Trying to install pc-to-tv.xpi getting this notice "Send from PC to TV 0.7.1 (Beta) could not be installed because it is not compatible with Firefox 3.6.12." any known fixes?

    We just bought a blue ray with pc to tv capabilities. The Sony website offered plug ins to enable this feature. When trying to add plug in pc-to-tv.xpi (for Firefox) we received this error message "Send from PC to TV 0.7.1 (Beta) could not be installed because it is not compatible with Firefox 3.6.12." any ideas?

    This error has been reported before in this bug:
    https://bugzilla.mozilla.org/show_bug.cgi?id=730040#c21
    Please read that bug I linked you to and let me know if the last comment in the bug solves your problem. Apparently the problem is about the addon .xpi file being read-only. Try right-clicking it, going to Properties and unchecking the "Read-only" attribute box at the bottom of the dialog. Click Apply, then OK.

  • Imessage sending from email not phone number, why!?

    I use imessage from my macbook, ipad and iphone and have selected my phone number to start new messages, through this Check Settings > Messages > Send & Receive but still my messages send from my email.
    Any thoughts on what I can do?

    When I turn back on all devices, where it says "you can be reached by imessage at" both my phone number and apple id email are checked, but only phone number for "start conversations from"
    If I uncheck my email from  the "you can be reached by imessage" section it sends only from my phone number via iphone and ipad (yay!) but I can not log back in to my messaging on my computer now...
    Does my email need to be selected in order for me to do this?

  • WLC 5508 - LAP1242: Failed to handle capwap control message from controller

    Hello everyone,
    after finally successfully upgrading my WLCs from 6.0.199.4 to 7.6.100.0 there is another problem showing up...
    If I want to change any configuration regarding the APs on the WLCs (which doesn't work) I get the following error-messages from the APs:
    *spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.169: %CAPWAP-3-ERRORLOG: Validate Msg: msg type 12 does not supported payload 215
    *spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.169: %CAPWAP-3-ERRORLOG: Validate Msg: error in Unknown Payload(215) payload (received length = 9, payload type = 215)
    *spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.170: %CAPWAP-3-ERRORLOG: Failed to validate vendor specific message element type 215 len 9.
    *spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.170: %CAPWAP-3-ERRORLOG: Failed to decode Configuration update request.
    *spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.170: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 7 state 11.
    *spamApTask7: Feb 27 14:34:00.558: 00:3a:9a:d6:5d:30 Test-AP-09-03: *Feb 27 13:34:00.171: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    Find attached some informations regarding the AP and the 5508.
    Any suggestions are, as always, highly appriciated.
    Regards
    Manuel

    Good morning,
    if I need free space at the flash: How much is "enough" to handle config changes?
    Here you can see the filesystem of one of my accesspoints (all are affected):
    AP#dir all-filesystems
    Directory of arch:/
        2  -rwx       91288  Feb 22 2014 18:16:42 +00:00  event.log
        8  drwx         448  Feb 22 2014 18:16:38 +00:00  c1240-k9w8-mx.124-25e.JAO3
        4  drwx           0   Nov 2 2011 23:32:18 +00:00  configs
        5  -rwx         397  Feb 22 2014 18:19:03 +00:00  env_vars
        6  -rwx        6168  Feb 27 2014 18:14:24 +00:00  private-multiple-fs
    No space information available
    Directory of flash:/
        2  -rwx       91288  Feb 22 2014 18:16:42 +00:00  event.log
        8  drwx         448  Feb 22 2014 18:16:38 +00:00  c1240-k9w8-mx.124-25e.JAO3
        4  drwx           0   Nov 2 2011 23:32:18 +00:00  configs
        5  -rwx         397  Feb 22 2014 18:19:03 +00:00  env_vars
        6  -rwx        6168  Feb 27 2014 18:14:24 +00:00  private-multiple-fs
    15740928 bytes total (10614784 bytes free)
    Directory of zflash:/
        2  -rwx       91288  Feb 22 2014 18:16:42 +00:00  event.log
        8  drwx         448  Feb 22 2014 18:16:38 +00:00  c1240-k9w8-mx.124-25e.JAO3
        4  drwx           0   Nov 2 2011 23:32:18 +00:00  configs
        5  -rwx         397  Feb 22 2014 18:19:03 +00:00  env_vars
        6  -rwx        6168  Feb 27 2014 18:14:24 +00:00  private-multiple-fs
    15740928 bytes total (10614784 bytes free)
    Directory of archive:/
    No files in directory
    No space information available
    Directory of system:/
        2  dr-x           0                      memory
        1  -rw-       17631                      running-config
    No space information available
    Directory of nvram:/
       30  -rw-           0                      startup-config
       31  ----           0                      private-config
        1  ----        4100                      lwapp_ap.cfg
        6  ----         528                      lwapp_ap_tlv.cfg
    32768 bytes total (26572 bytes free)
    Regards, Manuel

  • WLC 5508 Syslog send to custom port

    We have added Splunk to a monitoring systems and I would like to send my wlc 5508 log messages to it.  We have the Syslog Data Inputs on that server are all TCP and we would like to maintain tcp only if possible. I do need to be on a custom port other than 514.  We are on 7.4.100.60 on a HA pair of 5508's.  Does any on have any insight on changing the syslog port number in the WLC config?

    I too am using Splunk for capturing WLC Syslog.  With regards to the destination port of the Syslog, I don't know how to change it.  However, to get around this I have set up a Splunk Forwarder with Syslog-NG.  Basically Syslog-NG listens on any port number/protocol you define and writes logs to a log file name $hostname$.log.  This means I could have x different WLCs sending Syslog to Syslog-NG on UDP 514 and Syslog-NG will write the syslog from each host to it's individual file.
    From their I've configured Splunk forwarder to monitor each file and forward the logs on to Splunk.  You can forward to any port/protocol you wish.
    Also remember to do this
    config logging debug syslog enable
    On the controller.  Otherwise you won't see the messages you expect.

  • Failed to handle capwap control message from controller

    Hello,
    I am struggling in associating a 1242 AP's with WLC's.
    Show version of the AP:
    Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(25e)JAM2, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2013 by Cisco Systems, Inc.
    Compiled Mon 29-Jul-13 11:32 by prod_rel_team
    ROM: Bootstrap program is C1240 boot loader
    BOOTLDR: C1240 Boot Loader (C1240-BOOT-M) Version 12.3(7)JA1, RELEASE SOFTWARE (fc1)
    AP0019.56b0.855e uptime is 9 minutes
    System returned to ROM by power-on
    System image file is "flash:/c1240-k9w8-mx.124-25e.JAM2/c1240-k9w8-mx.124-25e.JAM2"
    Show inventory of the AP:
    AME: "AP1240", DESCR: "Cisco Aironet 1240 Series (IEEE 802.11a/g) Access Point"
    PID: AIR-LAP1242AG-E-K9, VID: V01, SN: FCZ10408384
    When trying to attach it to a WLC 5508 running 6.0.199.4, the AP keeps on downloading image and power cycling.
    When trying to attach it to a WLC 5508 running 7.4.110.0, the AP shows the following message :
    Jan 30 08:24:56.372: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
    *Jan 30 08:24:56.373: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.71.142.7:5246
    *Jan 30 08:24:56.427: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
    *Jan 30 08:24:56.445: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Jan 30 08:24:56.445: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
    *Jan 30 08:24:56.447: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Jan 30 08:24:56.484: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Jan 30 08:24:57.445: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Jan 30 08:24:57.473: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
    *Jan 30 08:24:57.478: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Jan 30 08:24:58.466: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    *Jan 30 08:24:58.473: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Jan 30 08:24:58.503: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Jan 30 08:24:58.508: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
    *Jan 30 08:24:58.513: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
    *Jan 30 08:24:59.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Jan 30 08:24:59.508: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Jan 30 08:24:59.532: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Jan 30 08:25:00.532: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    *Jan 30 08:25:06.483: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Jan 30 08:25:07.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.71.142.7 peer_port: 5246
    *Jan 30 08:25:08.565: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.71.142.7 peer_port: 5246
    *Jan 30 08:25:08.567: %CAPWAP-5-SENDJOIN: sending Join Request to 10.71.142.7
    *Jan 30 08:25:08.598: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
    *Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
    *Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    *Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.71.142.7 Jan 30 08:24:56.372: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
    *Jan 30 08:24:56.373: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.71.142.7:5246
    *Jan 30 08:24:56.427: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
    *Jan 30 08:24:56.445: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Jan 30 08:24:56.445: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
    *Jan 30 08:24:56.447: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Jan 30 08:24:56.484: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Jan 30 08:24:57.445: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Jan 30 08:24:57.473: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
    *Jan 30 08:24:57.478: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Jan 30 08:24:58.466: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    *Jan 30 08:24:58.473: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Jan 30 08:24:58.503: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
    *Jan 30 08:24:58.508: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
    *Jan 30 08:24:58.513: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
    *Jan 30 08:24:59.503: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Jan 30 08:24:59.508: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Jan 30 08:24:59.532: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
    *Jan 30 08:25:00.532: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    *Jan 30 08:25:06.483: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    *Jan 30 08:25:07.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.71.142.7 peer_port: 5246
    *Jan 30 08:25:08.565: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.71.142.7 peer_port: 5246
    *Jan 30 08:25:08.567: %CAPWAP-5-SENDJOIN: sending Join Request to 10.71.142.7
    *Jan 30 08:25:08.598: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
    *Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
    *Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
    *Jan 30 08:25:08.599: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 10.71.142.7
    Any idea ?
    Many thanks !

    here is the debug output:
    login as: groupwls
    (Cisco Controller)
    User: groupwls
    Password:************
    Your password does not meet the strong password requirements.For added security,                                                                              set a new password that meets these requirements. To prevent this message from                                                                              showing again, disable the strong password feature.
    (Cisco Controller) >debug pm pki enable
    (Cisco Controller) >debug capwap events enable
    (Cisco Controller) >*spamApTask2: Jan 30 09:46:38.639: 00:19:07:c6:39:60 DTLS connection not found, creating new connection for 10:64:94:52 (2134) 10:71:142:8 (5246)
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: called to evaluate
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 0, ID cert >bsnOldDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 1, ID cert >bsnDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCID: comparing to row 2, ID cert >cscoDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCertFromCID: called to get cert for CID 155224fa
    *spamApTask2: Jan 30 09:46:38.640: sshpmGetCertFromCID: comparing to row 0, certname >bsnOldDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 1, certname >bsnDefaultRootCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 2, certname >bsnDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 3, certname >bsnDefaultBuildCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 4, certname >cscoDefaultNewRootCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 5, certname >cscoDefaultMfgCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 0, certname >bsnOldDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 1, certname >bsnDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCertFromCID: comparing to row 2, certname >cscoDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: called to evaluate
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 0, ID cert >bsnOldDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 1, ID cert >bsnDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetCID: comparing to row 2, ID cert >cscoDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: called to get key for CID 155224fa
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: comparing to row 0, certname >bsnOldDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: comparing to row 1, certname >bsnDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: comparing to row 2, certname >cscoDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.641: sshpmGetSshPrivateKeyFromCID: match in row 2
    *spamApTask2: Jan 30 09:46:38.883: sshpmGetIssuerHandles: locking ca cert table
    *spamApTask2: Jan 30 09:46:38.883: sshpmGetIssuerHandles: calling x509_alloc() for user cert
    *spamApTask2: Jan 30 09:46:38.883: sshpmGetIssuerHandles: calling x509_decode()
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles: C=US, ST=California, L=San Jose, O=Cisco Systems, CN=C1240-001956b0855e, [email protected]
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles:   O=Cisco Systems, CN=Cisco Manufacturing CA
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles: Mac Address in subject is 00:19:56:b0:85:5e
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles: Cert Name in subject is C1240-001956b0855e
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetIssuerHandles: Cert is issued by Cisco Systems.
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: called to evaluate
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: called to get cert for CID 2f6d981f
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 0, certname >bsnOldDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 1, certname >bsnDefaultRootCaCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 2, certname >bsnDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 3, certname >bsnDefaultBuildCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 4, certname >cscoDefaultNewRootCaCert<
    *spamApTask2: Jan 30 09:46:38.887: sshpmGetCertFromCID: comparing to row 5, certname >cscoDefaultMfgCaCert<
    *spamApTask2: Jan 30 09:46:38.887: ssphmUserCertVerify: calling x509_decode()
    *spamApTask2: Jan 30 09:46:38.898: ssphmUserCertVerify: user cert verfied using >cscoDefaultMfgCaCert<
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetIssuerHandles: ValidityString (current): 2014/01/30/09:46:38
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetIssuerHandles: ValidityString (NotBefore): 2006/10/05/13:05:43
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetIssuerHandles: ValidityString (NotAfter): 2016/10/05/13:15:43
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetIssuerHandles: getting cisco ID cert handle...
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: called to evaluate
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 0, CA cert >bsnOldDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 1, CA cert >bsnDefaultRootCaCert<
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 2, CA cert >bsnDefaultCaCert<
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 3, CA cert >bsnDefaultBuildCert<
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 4, CA cert >cscoDefaultNewRootCaCert<
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 5, CA cert >cscoDefaultMfgCaCert<
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 0, ID cert >bsnOldDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 1, ID cert >bsnDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.898: sshpmGetCID: comparing to row 2, ID cert >cscoDefaultIdCert<
    *spamApTask2: Jan 30 09:46:38.906: sshpmFreePublicKeyHandle: called with 0x2c058e50
    *spamApTask2: Jan 30 09:46:38.906: sshpmFreePublicKeyHandle: freeing public key
    *spamApTask2: Jan 30 09:46:40.169: 00:19:07:c6:39:60 Allocated index from main list, Index: 312
    *spamApTask2: Jan 30 09:46:40.169: 00:19:07:c6:39:60 DTLS keys for Control Plane are plumbed successfully for AP 10.64.94.52. Index 313
    *spamApTask2: Jan 30 09:46:40.169: 00:19:07:c6:39:60 DTLS Session established server (10.71.142.8:5246), client (10.64.94.52:2134)
    *spamApTask2: Jan 30 09:46:40.169: 00:19:07:c6:39:60 Starting wait join timer for AP: 10.64.94.52:2134
    *spamApTask2: Jan 30 09:46:40.199: 00:19:07:c6:39:60 Join Request from 10.64.94.52:2134
    *spamApTask2: Jan 30 09:46:40.200: 00:19:07:c6:39:60 Deleting AP entry 10.64.94.52:2134 from temporary database.
    *spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 Join Version: = 117730816
    *spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 Join resp: CAPWAP Maximum Msg element len = 87
    *spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 Join Response sent to 10.64.94.52:2134
    *spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 CAPWAP State: Join
    *spamApTask2: Jan 30 09:46:40.201: 00:19:07:c6:39:60 capwap_ac_platform.c:1225 - Operation State 0 ===> 4
    *apfReceiveTask: Jan 30 09:46:40.201: 00:19:07:c6:39:60 Register LWAPP event for AP 00:19:07:c6:39:60 slot 0
    *apfReceiveTask: Jan 30 09:46:40.201: WARP IEs: (12)
    *apfReceiveTask: Jan 30 09:46:40.202:      [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
    *apfReceiveTask: Jan 30 09:46:40.202: WARP IEs: (12)
    *apfReceiveTask: Jan 30 09:46:40.202:      [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
    *apfReceiveTask: Jan 30 09:46:40.202: WARP IEs: (12)
    *apfReceiveTask: Jan 30 09:46:40.202:      [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
    *apfReceiveTask: Jan 30 09:46:40.203: 00:19:07:c6:39:60 Register LWAPP event for AP 00:19:07:c6:39:60 slot 1
    *apfReceiveTask: Jan 30 09:46:40.203: WARP IEs: (12)
    *apfReceiveTask: Jan 30 09:46:40.203:      [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
    *apfReceiveTask: Jan 30 09:46:40.203: WARP IEs: (12)
    *apfReceiveTask: Jan 30 09:46:40.203:      [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
    *apfReceiveTask: Jan 30 09:46:40.203: WARP IEs: (12)
    *apfReceiveTask: Jan 30 09:46:40.203:      [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
    *spamApTask2: Jan 30 09:46:41.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
    *spamApTask2: Jan 30 09:46:41.022: 00:19:07:c6:39:60 CAPWAP State: Configure
    *spamApTask2: Jan 30 09:46:41.022: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
    *spamApTask2: Jan 30 09:46:41.022: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
    *spamApTask2: Jan 30 09:46:41.023: 00:19:07:c6:39:60 Setting MTU to 1485
    *spamApTask2: Jan 30 09:46:44.028: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
    *spamApTask2: Jan 30 09:46:44.028: 00:19:07:c6:39:60 CAPWAP State: Configure
    *spamApTask2: Jan 30 09:46:44.028: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
    *spamApTask2: Jan 30 09:46:44.028: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
    *spamApTask2: Jan 30 09:46:44.029: 00:19:07:c6:39:60 Setting MTU to 1485
    *spamApTask2: Jan 30 09:46:47.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
    *spamApTask2: Jan 30 09:46:47.021: 00:19:07:c6:39:60 CAPWAP State: Configure
    *spamApTask2: Jan 30 09:46:47.021: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
    *spamApTask2: Jan 30 09:46:47.021: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
    *spamApTask2: Jan 30 09:46:47.022: 00:19:07:c6:39:60 Setting MTU to 1485
    *spamApTask2: Jan 30 09:46:50.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
    *spamApTask2: Jan 30 09:46:50.021: 00:19:07:c6:39:60 CAPWAP State: Configure
    *spamApTask2: Jan 30 09:46:50.021: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
    *spamApTask2: Jan 30 09:46:50.021: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
    *spamApTask2: Jan 30 09:46:50.022: 00:19:07:c6:39:60 Setting MTU to 1485
    *spamApTask2: Jan 30 09:46:53.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
    *spamApTask2: Jan 30 09:46:53.021: 00:19:07:c6:39:60 CAPWAP State: Configure
    *spamApTask2: Jan 30 09:46:53.021: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
    *spamApTask2: Jan 30 09:46:53.021: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
    *spamApTask2: Jan 30 09:46:53.022: 00:19:07:c6:39:60 Setting MTU to 1485
    *spamApTask2: Jan 30 09:46:56.021: 00:19:07:c6:39:60 Configuration Status from 10.64.94.52:2134
    *spamApTask2: Jan 30 09:46:56.021: 00:19:07:c6:39:60 CAPWAP State: Configure
    *spamApTask2: Jan 30 09:46:56.021: 00:19:07:c6:39:60 Updating IP info for AP 00:19:07:c6:39:60 -- static 0, 10.64.94.52/255.255.255.0, gtw 10.64.94.254
    *spamApTask2: Jan 30 09:46:56.021: 00:19:07:c6:39:60 Updating IP 10.64.94.52 ===> 10.64.94.52 for AP 00:19:07:c6:39:60
    *spamApTask2: Jan 30 09:46:56.022: 00:19:07:c6:39:60 Setting MTU to 1485
    *spamApTask2: Jan 30 09:46:59.019: 00:19:07:c6:39:60 DTLS keys for Control Plane deleted successfully for AP 10.64.94.52
    *spamApTask2: Jan 30 09:46:59.026: 00:19:07:c6:39:60 DTLS connection closed event receivedserver (10:71:142:8/5246) client (10:64:94:52/2134)
    *spamApTask2: Jan 30 09:46:59.026: 00:19:07:c6:39:60 Entry exists for AP (10:64:94:52/2134)
    *spamApTask2: Jan 30 09:46:59.026: 00:19:07:c6:39:60 apfSpamProcessStateChangeInSpamContext: Deregister LWAPP event for AP 00:19:07:c6:39:60 slot 0
    *apfReceiveTask: Jan 30 09:46:59.026: 00:19:07:c6:39:60 Deregister LWAPP event for AP 00:19:07:c6:39:60 slot 0
    *spamApTask2: Jan 30 09:46:59.027: 00:19:07:c6:39:60 apfSpamProcessStateChangeInSpamContext: Deregister LWAPP event for AP 00:19:07:c6:39:60 slot 1
    *apfReceiveTask: Jan 30 09:46:59.027: 00:19:07:c6:39:60 Deregister LWAPP event for AP 00:19:07:c6:39:60 slot 1
    *spamApTask2: Jan 30 09:46:59.028: 00:19:07:c6:39:60 No AP entry exist in temporary database for 10.64.94.52:2134
    *spamApTask0: Jan 30 09:46:59.127: 00:19:07:c6:39:60 Received LWAPP DISCOVERY REQUEST to 44:2b:03:b4:39:cf on port '13'
    *spamApTask3: Jan 30 09:46:59.128: 00:19:07:c6:39:60 Discovery Request from 10.64.94.52:2135
    *spamApTask3: Jan 30 09:46:59.128: 00:19:07:c6:39:60 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 50, joined Aps =0
    *spamApTask3: Jan 30 09:46:59.128: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2135
    *spamApTask3: Jan 30 09:46:59.129: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2135
    *spamApTask0: Jan 30 09:46:59.129: 00:19:07:c6:39:60 Discarding discovery request in LWAPP from AP supporting CAPWAP
    *spamApTask0: Jan 30 09:47:28.995: 00:19:07:c6:39:60 Received LWAPP DISCOVERY REQUEST to 44:2b:03:b4:39:cf on port '13'
    *spamApTask2: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Discovery Request from 10.64.94.52:2134
    *spamApTask2: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 50, joined Aps =0
    *spamApTask2: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2134
    *spamApTask2: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2134
    *spamApTask0: Jan 30 09:47:28.996: 00:19:07:c6:39:60 Discarding discovery request in LWAPP from AP supporting CAPWAP
    *spamApTask0: Jan 30 09:47:58.856: 00:19:07:c6:39:60 Received LWAPP DISCOVERY REQUEST to 44:2b:03:b4:39:cf on port '13'
    *spamApTask3: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Discovery Request from 10.64.94.52:2135
    *spamApTask3: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 50, joined Aps =0
    *spamApTask3: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2135
    *spamApTask3: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Discovery Response sent to 10.64.94.52:2135
    *spamApTask0: Jan 30 09:47:58.857: 00:19:07:c6:39:60 Discarding discovery request in LWAPP from AP supporting CAPWAP
    *sshpmLscTask: Jan 30 09:48:10.688: sshpmLscTask: LSC Task received a message 4

  • I have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being rec.

    i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?

    turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them

  • TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    Sorry for the delay...
    I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
    I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
    Thanks for the help, anyway!!

  • My wife and I each have an iPhone 4S. With the upgrade to ios6 all text messages sent from my phone show up on hers to include responses from my text. text that she sends from her phone appear as if from mine. How do we stop it?

    My wife and I each have an iPhone 4S. Ever since the upgrade to ios6, text messages sent from my iPhone also appear on hers? All response to those text also show up on both devices. Likewise, text sent by her appear to others as having been sent from my iPhone. I have tried turning group messages off but nothing works. How can I correct this on both phones? Appreciate any help.

    Rectory wrote:
    Please can someone tell me how  I can change this so when I send a mail from my phone and from the IPad that it reads from me.
    You need a separate email address but you've already ruled out that solution.

  • My iMessage is sending from email instead of my phone number. I have tried to change it back by going to settings messages receive at and it won't let me click on my phone number. Please help!!

    My IMessage is sending from my email, and I am recieving
    Messages thru my email. I have tried to fix this by going to Settings > messaging > recieved at> and my phone number pops up along with my email. It will let me click on my email, but my phone number is greyed out and I can't click on it.i have also tried caller id, which still didn't fix the problem.
    Trying to kill two birds with one stone, my phone also says that I have no storage left. I literally have 3 apps installed on my phone. Facebook, Twitter, and instagram. I only have 52 photos, 0 videos, and about 115 songs. I know for a fact that I shouldn't be out of storage, because I have friends with the same iPhone 4, that have 400 pictures, a thousand songs, and page after page of apps. I want to know what is taking up all of the storage, and what can I do to get rid of it. Thank you in advance

    Sorry G23 - I like birds ;)
    I suggest you start another thread as I don't know the answer to that one but this might help:
    Go to settings - general - usage -   Her e you might find some data hogs
    Good luck

Maybe you are looking for

  • There are no shape tools showing up when I apply the fast blur effect.

    How do I fix this or work around?

  • Not Recognizing external Lightscribe drive

    I have just purchased a Bytecc Aluminum External USB 2.0 DVD+/-R RW Dual Layer 18x Burner w/lightscribe powered by Samsung SH-S182M https://www.supergooddeal.com/ProductDetails.asp?ProductCode=S82M-ME5-BK It appears it is an internal drive put in a e

  • Accidentally deleted some text in notes app..

    Hi, I had a note open within the notes app (IOS 6.1.4) (iPhone 5) in which i had written a fair amount of things. I had one sentence seperately, then a bulk of text below it, in which i first belive i accidentally copied the top line, selected the en

  • How do I shorten a ringtone?

    I have a ringtone that I downloaded. How do I shorten it to use it as a text tone? I have the ringtone in iTunes already. Thanks.

  • Appleworks crashes after security upgrade

    I successfully ran Appleworks 2 weeks ago. I did a "security upgrade" today which updated many files. Now I cannot open Appleworks for a new file, for my 2 week old file, or even on the templates. The starting window comes up and immediately crashes.