Controller and Touch Panel having slow communication over network

I'm using a cFP-2100 and a Touch Panel CE 4.2 Device, and they're communicating over my company's network via an ethernet switch. The controller and touch panel are in constant communication, since the touch panel reflects the current status of the VI using network-published shared variables. However, when I make a selection on the touch panel, it can take a LONG time to register at the controller. Is there any way I can speed this up? Does anyone know what might be causing the long lag times?
Thanks,
Eric

Hello Eric,
How long are we talking here? What sort of traffic do you have on your work network? If you connect the two of these to a switch on an isolated connection do you still see a significant amount of lag time between updates.
-Bob
-Bob

Similar Messages

Difference between LV PDA module and touch-panel module

What is the difference between LabView's PDA module and touch-panel module? I want to recompile my application developed on a Win XP environment for a touch-screen single board computer running Win CE. From what I have read, it seems like both PDA module and the touch-panel module would be able to do the task - but what is the difference between the two modules?

sstolteq:
The LabVIEW PDA Module allows you to create applications that run on Microsoft Windows Mobile for Pocket PC devices. It is also compatible with several NI data acquisitions devices, including the USB-6008, USB-6009, CF-6004,
DAQCard-6062E, DAQCard-6024E, and the DAQCard-6036E.
The LabVIEW Touch Panel Module, on the other side, allows you to create human-machine interface (HMI) applications to
communicate with NI embedded real-time platforms such as Compact
FieldPoint, CompactRIO, and Compact Vision System. It is optimized for developing
HMIs to Windows CE touch panel devices such as the NI TPC-2006.
I hope this helps and please let me know if I can help further.
Regards,
Rudi N.

Is it possible to move my iTunes from the old laptop to the new one (including all the music files and playlists) without having to start all over again with a blank iTunes?

Is it possible to move my iTunes from the old laptop to the new one (including all the music files and playlists) without having to start all over again with a blank iTunes?

yes
You will need to copy the whole iTunes folder which is in your user profile on the old computer in Music folder.
Before you do it make sure iTunes are updates on the old computer and it works without any problems.
This will copy all your media, music, movies (provided you did not change the default location).
After the migration you will need to sing in to Apple store again with your Apple ID
and also authorize your new computer (both done from the tom menu bar in Store.
Once you are done please deauthorize your old computer (the same menu path) if you are not planning to use it anymore.
Any problems post here.

Parallel use remote control and touch panel.

Hi.
Cisco TelePresence SX20 with firmware TC7.1.4.908e4a9 and was synchronized with touch panel. Can I use remote control when touch panel is enabled. Now remote control is locked.
Thank's.

Hi
No. When a codec is paired with a Touch controller it is not possible to use the remote control.
You question number 677 in link bellow
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/articles_doc/telepresence_endpoints_knowledge_base_articles.pdf
br Oleksandr

Dot net dll and touch panel module

Hi all,
Is there any possibility to use a dot net dll with the touch panel module on LabView 2011?
Thanks in advance...

This appears to be related to this:http://forums.ni.com/t5/LabVIEW/call-dll-function-on-Windows-CE6-0-Device/m-p/2092170
Since you already know that the device would be running Windows CE or Windows Embedded Standard, the question is really can Windws CE or Windows Embedded Standard use .NET? Not sure why you are asking this on a National Instruments forum, since it's a Windows question. I do know that .NET compact is available. Have no idea how well it works.

Can we connect xbee to cfp2020 controllers serial port for wireless communication

hi,
i wanna do data aqcuisition using ethernet as well as wireless technologies, for that i wanna use xbee with cpf 2020. is it possible?
thanks in advance

You can do it fine..
I am guessing the wireless modem is really a router as well. When you say wireless do you mean 3g internet or 4g internet or do you mean cable or adsl and a wireless modem router.?? It is just helpful to know what you are talking about by wireless modem or wireless internet.
You have that plugged into ethernet over power (EOP) adapters .. that is great.
Plugged into TV again that is fine.. although I am unclear what or how it is decoding.. is it IPTV??
Now to your specific questions.
Now, is it possible to
a) connect the Time Capsule to the powerline, so it can act as an access point? When connected to this powerline (ethernet) I hope I won't loose speed to the wireless connection
Yes, the TC needs to be bridged..
Go to manual setup of the Airport utility.. click on the internet tab.. go to connection sharing on the bottom of that page.. select off bridge mode.. update the TC.
Now you can plug the TC into the EOP adapter. And it will work as Wireless Access Point.. WAP or short AP.. and switch.
Plug the TV into the TC as well.. that should all work fine.
b) will I be able to connect my digital tv-decoder to the TC without any problems? So the TC is the decoder's "ethernet port"?
Hope this is a bit clear, as English is not my mothertongue...
IPTV can be complicated to setup and exactly how it works will depend on the main router.. sometimes IPTV is only delivered to a specific ethernet port.. in which case the above suggestion will not work.. you can use either internet or the TV.. not both..

Thanks this was very useful.. I have a brand new iphone 4s unlocked version from singapore and I am having the same problem constant network fluctuations, no service, call failed, invalid sim, sim failure, bars fluctuating from 5 - 3 - 2 - 1, no signal/ba

I have a brand new iphone 4s unlocked version from singapore and I am experiencing constant network fluctuations on my iphone , no service, call failed, invalid sim, sim failure, bars fluctuating from 5 - 3 - 2 - 1, no signal/bars searching etc... Ifeel miserable after trying out all the options changed multiple sims, tried multiple carriers, restored the phone back and have set-up as new device but the problem does not get solved... its is so frustrating that after investing on a world's most expensive phone you cannot enjoy the calling features which the phone offers which is the main thing you own the phone for.. Rest of the things are working.. The funniest part I am not able to make calls or receive calls but can access the internet.. I have tried every possible thing and really very frustrated with this iphone of mine...I hope the problem gets solved.. would anyone have any solutions to this problem.. Does it mean one should never update software as I hear that after updating to IOS.5.1 the problem has started coming and same has been with there.... Apple says its a hardware failure which is very difficult to digest as sometimes I get 5 bars and able to make and receive calls but 95% of the time I am unable to. If anyone has any solution I will be very happy if he or share can share the same. Many thanks. its so disgusting to experience this on top of this apple does not support global warranty for the phone as you need to go to the country from where you bought the phone for replacement.. Truly sad state of affairs.. very very very dissappointing.

Have a look at this it might help
http://support.apple.com/kb/TS4148

Photoshop cs3 extended asking for serial number and activation after having the program for over 5 years now

for some reason the program out of the blue is asking for a serial number and activation. I can't find the case anymore. does anyone have a way I can contact adobe directly to see if they can help me solve this problem.
Everywhere I look points me back to the forum or troubleshooting menus.
thanks

It may think you have a different computer if you've changed some of the hardware recently.
Did you purchase the software as a download or register it with Adobe? If so, your serial number may be available from them directly. Click first the red A logo at the top of this page, then drill down through [Manage Account] to see the products they have on file for you.
If you've physically lost your serial number and never registered it with Adobe, it's like losing a wad of cash on the street. You're responsible for holding onto your valuables and no one's going to step up and replace it for you.
The Creative Cloud Photographer's Bundle subscription package is still available for $9.99 a month, as far as I know.
-Noel

Bi direcional Client/Server communication over TCP/IP

Could someone suggest me a tutorial about Bi direcional Client/Server communication over TCP/IP in LabView?
Thank you in advance.

I would start by looking at the examples included with LabVIEW.
Look in examples\comm\TCP.llb
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Quickbooks slow to open over network

Quickbooks is Database Server Manager is Running R6.5554 each of the end computers is fully patched (not sure version don't have it in front of me). I was thinking that too but I am getting the same issue when I try and run it from a client computer (not touched in server upgrade) to another client computer.

I have a customer that I updated from Server 2003 R2 to Server 2012 R2 Essentials. Now they are complaining though that the quickbooks is very slow to open and I have confirmed it takes about 60 seconds from the login screen of quickbooks to having the file open.My first thought was the HDD was failing so I replaced the entire OS drive with a new SSD. Same issue.Then I thought maybe it was the server's fault so i copied the file to a end users computer and the login process was almost instant.So to take the test farther I then told that computer to host the QB file and connected another computer to the computer hosting the file (straight though no switch just direct connection) and the computer hosting the file was working great. The laptop I was trying to open over the test network was same as loading from the server 60 seconds+...
This topic first appeared in the Spiceworks Community

Labview exe slow to start over network

I am executing a Labview exe built in version 7.1.1 by running it from a local server in our plant. It takes approx. 50 seconds to display it's front panel. If I run it from my local drive it comes up in a few seconds. To copy the exe from the netwark drive is also quite fast, only a few seconds. I have seen this behavior many times with Labview exe's running from a network drive. Does anyone know why this is happening, and if there is a solution to this slow startup issue?
Thanks,
Howard Spec
CMC Electronics
Ottawa, Canada

It's good to know it's not just me that has this problem, and I can run locally since we are doing CRC check on the exe before using it. I would still like an explaination for why this is the case with Labview exe's (or maybe any exe)?
Thanks,
Howard

Acrobat 9 Pro very slow open files over network in Windows 7

I have installed Acrobat 9 pro on my new PC. It's running Window 7 64bit. I use it for pre-press of high-resolution files for printing. Sometimes the file sizes run into the 100s of MB.The new PC has reasonably high specs, with 6Gb of RAM and a 2.8Ghz Quad core i7 CPU and gigabit networking.
Opening them when on the local hard disk is reasonably fast. For example a multi-page 400Mb file starts drawing the first page withing 3 seconds. But opening the same file when it's on the server of our gigibit network generates a very long pause. The application locks up and dispays a "not responding" message for 2-3 minutes. The bigger the file, the longer the pause. It doesn't completely crash -- eventually it starts to draw the pages and I can work as normal.
I used to have Acrobat 9 pro on my old XP PC which was a cheap low-end machine when bought 3 years ago. (has on-board shared RAM graphics card and only 1Gb of RAM). But what grieves me the most, is this slow old machine will open the same 400Mb file off the server so much faster than my expensive new machine. There is no lock up and it begins drawing the first page after only approx 5 seconds.
The problem doesn't seem to be simply related to slow network speed. I can copy the entire 400Mb file from the server to my hard disk in only 12 seconds. The old PC is actually slightly slower copying to/from the network. If the application was for some reason copying the entire file into memory or to a local cache, this should still only generate an extra 12 second delay -- not 3 whole minutes.
Adobe Reader 9 doesn't have the problem. I can open the 400Mb file off the network on either my new or old machine within seconds.
Acrobat 9 Pro doesn't have the problem on an old G5 mac either. It's somewhat slower than my old PC but will begin drawing the first page after a few seconds,
So what exactly is Acrobat doing for those 2-3 minutes?
I have already tried:
1. changing network ports/cables.
2. disabling anti-virus software
3. disabling "remote differential compression"
4. Patching Acrobat 9 to 9.2
5. Files located on Windows servers and Mac Xserves.
Not improvements from any of these.

I think I have isolated the source of this problem. It's the Pitstop Professional 9 plug in. I un-installed this, and everything opens quicker than greased lightning. I re-installed it and it's back to slowsville.
Unfortunately Pitstop is essential to my workflow.
Until recently I did my pre-press on a Mac G5 with Acrobat Pro 7 and Pitstop 6.5. I never had this problem with slow file opening. But it seems that the delays would occur when I used the plug-in with large complex files.. So it would open files as fast as you'd expect from an elderly machine. But starting to use Pitstop would result in a prolonged period of staring at a spinning beachball.
I wonder is there any way to stop the Pitstop plug-in from initializing until it is used? So the plug-in stays inert until you select the tool from from the menus.

Having problem accessing MacMini over network with PC's Windows 7

Hi all,
I have a Mac Mini with 10.6.x
Onec in a while, especially when restart Airport Extreme for upgrade or something else (both are connected with ethernet cable cat5e) ALL PC's on the network having problem accessing Mac Mini Server while All MACs are fine and can access all folders no problem. Usually takes about 3-4 min for PC to connect to server. Then once it is connected (it loads all folder and files in that current window on the PC) i can go from folder to folder with no delays. However if i close the window with all folders then again i have to wait for around 3 min. to load everything all over again. AFP and SMB are ON. Today i made an experiment and turned SMB off and the problem still excist with the difference that after 3-4 min delay no folders were shown.
It seems that the PCs have hard time establishing connection with the server which is weird that Macs don't have that problem. It must be something with the setting of Mac MIni. Other wise i have no problem accessing Internet so the routher is working fine. DHCP is ON on the AP Extreme.
I came across as i was searching for this issue and it seems that authentication - Golden triangle or whatever is called - might be the issue in the whole mess. Do you guys think that this might be the case ?
The only way i have found out to help is to restart the Router and Server and that usually fix the problem .
Could you please help me figure what is going on there?
Here is the original thread: https://discussions.apple.com/thread/3867559?tstart=0 ( i think i posted in the wrong forum )

The specified changeip -checkhostname command does not make changes to your configuration.
To research the command (and that's entirely your perogative), please use Google or Bing to search for previous discussions and details, or review the provided man page documentation for the command. (Launch Terminal.app (folder Applications > Utilities) and issue the command man changeip. You'll see something like this:
$ man changeip
changeip(8)               BSD System Manager's Manual              changeip(8)
NAME
     changeip -- Change service configuration files with hard-coded IP addresses
SYNOPSIS
     changeip [-v] [-d path] old-ip new-ip [old-hostname new-hostname]
     changeip -checkhostname
     changeip -h
DESCRIPTION
     changeip is used to manually update configuration records when a server's IP address or hostname changed in a way that affected services were unable to properly process, for example when the server is behind a NAT device and the WAN identity changed. ...
Given your response and your concern, consider creating a backup of your disk. Shut down, boot the installation DVD, and use Disk Utility (from the Utilities menu) in the second screen of the installation process to copy your disk contents to an external storage device. (Time Machine isn't as good at getting a backup of a server as is a clean backup created while shut down.) There are descriptions around that detail how to create this backup using Disk Utility.
There is no DNS server implemented in the Airport Extreme. The Airport Extreme forwards DNS requests to a DNS server elsewhere. Few gateway devices contain DNS servers; that these devices request a DNS address tends to be confusing, too. That address is solicited from the user for use in the DHCP server that many of the available gateway devices provide.
There is no need for a DNS forwarder, particularly if your server is configured for your LAN. (Adding a forwarder adds another hop into the whole translation process. That configuration and that extra hop can be useful when the intermediate DNS server is providing specific, enhanced DNS-related functions, such as security monitoring and logging, or providing a "nanny filter" mechanism.)
If you are running DNS services on your LAN, then your Airport Extreme DHCP server should be configured to pass out the IP address of your DNS server.
It would appear that your local box has the default self-hosted DNS, and is not configured to serve LAN DNS (other than for itself). That's good. Accordingly, it'll likely be getting good DNS from itself, but will not be getting translations for other hosts on your network. That's not so good. When DNS responses are not available, you'll get DNS-level timeouts, and those are usually around 30 seconds each.
Check your server logs for messages related to the failed connections, and check the Windows file service logs for any errors being generated by the file service. The log information is most easily available from Console.app, which is a utility in Applications > Utilities folder, or from the Server Admin tool (Applications > Server folder) for DNS, and for the file server component.
The above is probably going to read like a wall of unfamiliar jargon, so please ignore this and my previous response here, and I'll leave it to somebody else to assist you here.

RAW files slow to open over network

Hi I have a 20inch iMac with 2Ghz RAM which i use to edit RAW photo's from the companies server. For some reason when i open or preview the files it seems to take an age. I have done a bit of searching on the net and found a few helpful sites which got me to look at the preferences but unfortunately most of it i had already tried and the rest didnt make any difference. Once in Photoshop everything seems to be fine and working at normal speed. This to me points to a problem with the network but there are other Macs that dont have this problem. Can someone please help i am running out of ideas.

Do you have other network related file performance issues or is it just limited to raw?
We run a sizable academic network with a couple of thousand users and problems like this almost inevitably turn out to be permission based. Do you have an internal network support person that can watch your process from the server end?

Function palette icons different for Touch Panel project

When I first installed LabVIEW (v8.5.1) the FieldPoint I/O palette did not show up when I tried to create a Touch Panel project. It did however show up if I simply opened the VI itself (which I created when I created the project) instead of opening the project. I decided to write the entire VI in that manner and would simply import it into a new project when I was finished. I recently finished writing the VI and imported into a new project I created. However, when I try to run the program it doesn't work. I also just noticed that the Merge Errors icon doesn't show when working in a project, but does show if I only have my main program VI open. Does anyone know why this would be the case? I think I have everything installed correctly, although with so many add-ons/toolkits/drivers I am not 100% positive. I'm trying to figure out why my program doesn't build correctly and thought I would start here. I don't know if that is the cause of my build problem, but any insight or help would be greatly appreciated.
Cheers,
-John

Hi John,
Touch Panel VIs do not support all of the functions or controls normally found on the LabVIEW palettes. In the LabVIEW Help, if you browse to Touch Panel Module >> Creating Touch Panel VIs, there are topics called "Designing PDA and Touch Panel User Interfaces" and "Developing PDA and Touch Panel Block Diagrams." Differences in Touch Panel controls, indicators, functions, properties, and methods are documented here.
When a VI is opened as part of a project under a touch panel target, the Functions and Controls palettes change to display only functions and objects that are supported. You will notice that some VIs, such as Merge Errors.vi, are missing, while others, such as PDA Error Handler.vi, are added. If the VI is opened outside of the project, it isn't specified as a Touch Panel VI so the standard palettes are visible. I prefer to develop my VIs under a touch panel target to make sure I am using supported functions.
Hope this helps clarify things.
Jennifer R.
National Instruments
Applications Engineer

Controller and Touch Panel having slow communicat​ion over network

Similar Messages

Maybe you are looking for

Controller and Touch Panel having slow communication over network