Controller Assign Problem

Can't seem to assign my midi controller to control Master Output.
I've setup pan, volumes, etc for all tracks but not the Master.
In the controller assignment expert view i can select:
Class: Channel Strip
Channel Strip: Master
But the parameter setting (which should say volume) is always greyed out.
I've also tried doing:
Logic Pro>Preferences>Control Surfaces>Learn Assignment for "Volume"
but as soon as i change the fader bank dropdown to master it greys out the volume parameter.
Any ideas?
Many thanks
Paul

scrub that.
seems to be working..
Message was edited by: Groove Yard Productions

Similar Messages

Controller Assignment - Bug

I have two issues with the Controller Assignment window. It has only a few manual assignments, the QuickAccess and a few MIDI faders from my PC1600 MIDI controller.
1) Most of the time when I get a Logic crash, it wipes out all the assignments in the Controller Assignment window. After a reboot the whole page is blank and everything is gone. It looks like the Logic crash corrupts the "com.apple.logic.pro.cs" file where the information is stored.
2) Now a have a new issue. I can't make any new assignments in that window. When I click the "Learn Mode" button the parameters above will show up and disappear right away. Seems like the Button doesn't stick. If I erase Logic's preference file "com.apple.logic.pro.plist" then it will work again. I'm not ready to toss my preference file. Besides redoing all the settings in the Preference Settings window, I would loose my custom Color palette and all the Favorite checkboxes in the Apple Loop Browser. (To store those information in the preference file is a stupid idea in the first place,. Even I sent Apple lots of feedback since L7, it is still there and therefor completely useless for exactly that reason.)
Does anybody have the same problem or maybe a solution regarding the Controller Assignment?

I'm sorry to say that i have a mackie logic control and 8 wiped out the hardware chip. i know everyone say's software can't effect hardware but we now know it's true. I don't have a solution but apple doesn't know how to fix it either. I have had so many problems with 8 that Apple gave me a new computer because it corrupted my system software. The logic techs i spoke with suggested backing down to 7.10.11 and tiger. when i had my studio running on 7 everything worked perfectly. supposedly there are a lot of people out there that have no problems with 8 but there are some very serious issues, I suggest you call the support guys for your board and apple for 8. I spent the last 8 weeks trouble shooting one thing or another. Be careful some things created more problems. I wish you luck and I'm sorry I couldn't help more. Just so you know I erased my hard drive twice and the second time i went one at a time to try and figure if maybe something else was effecting everything.
guess what the 3rd item was 8 and everything went down hill again. finally apple replaced the computer and i'm definitely not using 8. good luck

Sculpture automation & Controller assignment issues

Hey guys,
I have an instance on Sculpture in a project i am working on. Everything is fine until the point where i try to manually write some automation in the arrange window. As soon as I select the parameter i want to change (LFO1 rate in this case) the sound of sculpture gets all weird and sounds nothing like the one before.
Is this some kind of bug? has anyone encountered this?
I also have another question and as im posting this anyway ill just put it here.
Im trying to set up a nanoKontrol2. Ctrl+k, created several modes (fader, es2, ultrabeat etc). I've assigned several buttons to switch between the modes but the assigned functions wont operate until i also choose that particular instrument in the arrange window.
Is there a way around this? i.e switch bet modes and actually affect that instrument without having to use a mouse to choose it?
Im also having problems with the fader mappings when trying to control volume levels of multi output instruments exs24, ultrabeat. When i move a fader of the overall instrument only the volume of one (unassigned) fader of lets say output 3-4 of that instrument will get affected. Im i doing something wrong?
Cheers

I'm not sure if this will help: http://www.youtube.com/watch?v=nvBmsMB2XSQ&feature=PlayList&p=5B14BDD35A022ED3&i ndex=45
I spent a whole day following the above advice, assigning controls for my M-Audio keyrig 25 to 18 different logic native plugins (Channel EQ, Guitar Amp Pro, Tape Delay, etc etc). And then assigning'no-mode mode change' (if you follow me) to different letters on my 'caps lock keyboard'. This worked great yesterday. Now today it's all flaky: The caps lock keyboard doesn't change modes anymore, and only one of the assignment 'maps' seems to work. (Even making sure all target plug ins were on the same SELECTED track, and the plugin in question had 'focus' by clicking on it). Does anyone know if there's a known issue with controller assignment recall in Logic Pro (8)?
JD

Custom tasklist variant - Phase Controller Internal Problem

Hello,
I am trying to work with a custom tasklist variant. For that I have created a ZSAP0 variant, and copied all tasks for H*** tasklist (cannot use the Urg* word, forbidden by the guidelines) and Maintenance Cycle. I did not put anything custom yet, I just want to have the custom variant working first.
I then create a maintenance project, assign a logical component and all that, as usual. Then, when creating the tasklist, I get the "Phase Controller Internal Problem" message. The task list is created but not active, and no service transaction is created.
I think maybe the link between the tasklist variant and the transaction type SDMN is not done, but I have no idea where this should be done, I cannot find anything about this in the IMG.
Would someone know that? Or have any other idea about why this is not working?
Thanks in advance.
Thomas

Hi,
Try this note
926087
If problem still persists, carry out activities as mentioned in the note 1129073.
Hope this solves your problem.
Feel free to revert back
-=-Ragu

NTP Service on Domain Controller have problem with cisco switch

Hello!
I have Windows Server 2008 R2 SP1 Domain Controller with NTP services
The windows opertion system clients get NTP time ok.
There are problem with cisco switch, can't get time from NTP.
Can anybody help me to fix problem?
C:\Users\Sysuser>w32tm /query /configuration
[Configuration]
EventLogFlags: 2 (Local)
AnnounceFlags: 5 (Local)
TimeJumpAuditOffset: 28800 (Local)
MinPollInterval: 6 (Local)
MaxPollInterval: 10 (Local)
MaxNegPhaseCorrection: 1800 (Local)
MaxPosPhaseCorrection: 1800 (Local)
MaxAllowedPhaseOffset: 300 (Local)
FrequencyCorrectRate: 4 (Local)
PollAdjustFactor: 5 (Local)
LargePhaseOffset: 50000000 (Local)
SpikeWatchPeriod: 900 (Local)
LocalClockDispersion: 10 (Local)
HoldPeriod: 5 (Local)
PhaseCorrectRate: 7 (Local)
UpdateInterval: 100 (Local)
[TimeProviders]
NtpClient (Local)
DllName: C:\Windows\system32\w32time.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
AllowNonstandardModeCombinations: 1 (Local)
ResolvePeerBackoffMinutes: 15 (Policy)
ResolvePeerBackoffMaxTimes: 7 (Policy)
CompatibilityFlags: 2147483648 (Local)
EventLogFlags: 0 (Policy)
LargeSampleSkew: 3 (Local)
SpecialPollInterval: 3600 (Policy)
Type: NTP (Policy)
NtpServer: 10.7.0.4 (Policy)
NtpServer (Local)
DllName: C:\Windows\system32\w32time.dll (Local)
Enabled: 1 (Local)
InputProvider: 0 (Local)
AllowNonstandardModeCombinations: 1 (Local)
VMICTimeProvider (Local)
DllName: C:\Windows\System32\vmictimeprovider.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
Cisco config and errors
CISCO1#show ntp ass det
10.7.0.7 configured, insane, invalid, stratum 3
ref ID 10.7.0.4, time D5BC850F.C8400AB2 (15:50:39.782 MSK Mon Aug 19 2013)
our mode client, peer mode server, our poll intvl 1024, peer poll intvl 1024
root delay 62.50 msec, root disp 11128.04, reach 377, sync dist 11218.796
delay 6.06 msec, offset -467951.1096 msec, dispersion 56.49
precision 2**6, version 3
org time D5BC8864.F79C33A7 (16:04:52.967 MSK Mon Aug 19 2013)
rcv time D5BC8A38.EBDECB39 (16:12:40.921 MSK Mon Aug 19 2013)
xmt time D5BC8A38.EA5173BE (16:12:40.915 MSK Mon Aug 19 2013)
filtdelay = 6.06 5.87 3.23 7.90 6.41 5.17 13.03 3.43
filtoffset = -467951 -467905 -467936 -467885 -467764 -467816 -467707 -467697
filterror = 0.02 15.64 31.27 46.89 62.52 78.14 93.75 93.78

Hi,
>>I gave log on as a service right to this account in Default Domain Controllers Policy but unfortunately it was not enough
Based on your description, we can try to grant this account Allow log on locally
user right in the default domain controller policy to see if it helps.
The policy setting is:
Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Allow log on locally
Allow log on locally
http://technet.microsoft.com/en-us/library/cc756809(v=ws.10).aspx#feedback
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

Controller Assignment Question

Hello, i was wondering if anyone could steer my in the right direction on this problem I have with controller assignments. See, i want to use Logic 7.1 on my Powerbook in a live situation with some midi controller knobs. The question is, how can i set up controller assignments so that i can have different assignments per song ( which has totally different tracks and plugins) ? I broke out the manual and read something about modes and zones, but cannot figure this out for the life of me, or know if this is the right direction to go in.
I create the controller assignments for one song, then when i open up the next song, they seem to be interfering with each other. I suppose the controller function isnt particularly meant for this, but is there any way i can get around this problem?
Thank you for taking the time to read this! I really appreciate any help.
Leech.
http:/www.myspace.com/leechernowetz
Powerbook g4 Mac OS X (10.4.6) Logic 7.1 , Evolution X-Session MIDI Interface

When you use the "Learn mode", you bypass the Enviornment all together and Logic directly maps the controller info to the AU plug-in (or other control parameter).
A quick and dirty way to (maybe) resolve this would be to make your midi controller send different channels on for each song. Therefore, song 1 would respond to assigned midi key commands on channel 1, song 2 would listen for channel 2, etc...I don't have Logic in front of me, but I think this might work. It's not the most elegant solution, but it might work. Another similar idea would be to put a transformer and shift all your CC different values (e.g. song 1, CC#1 would be CC#21 for song 2, CC#2 on song 1 would be CC#22 on song 2). And if you want to contol the same parameter from song to song, don't transform the CC (this is obvious, but I want to point it out).
To reiterate, this is not the most elegant solution and I could be completely wrong, but this might be a quick fix.
The best way (in my opinion) is wire cables (with transformers) in the environment to the audio object that you want to control. I haven't been able to get that idea to completely work and I am still working on it.
good luck.
Dual 1.8Ghz G5 PB G4 1Ghz LP7.1.1 RME FF800 Mac OS X (10.4.6) Reaktor 5.1 Reason 3.0.4 Live 5.0.2 Battery 2.1.1 Recycle 2.1 DFH 1.5.3

Controller assignment not seeing certain functions

Hi,
I'm currently assigning controls to my ms20 controller for the arturia jupiter 8 plugin.
Most things are 'learning' no problem, but there's a couple that logic just won't see. Thery're pretty straight forward ones too on the jupiter 8 interface - wave shape - for example.
I'm sure i mapped them before which is weird.
Is there anything i can do here to get logic to see them?
Thanks in advance for any help and advice.
Tom

Definitely. I just figured I would post about it (search didn't find any old posts about it).
It has the feel of an unfinished project. I'm sure that is what happened. I doubt they will try to fix that area in any Logic update. It needs to be reworked entirely.

Requests (No vendor assigned ) problem

Hi all,
we are trying SRM 5.0 standalone scenario
we were successful at configuring Self-Service Procurement, all our shopping carts take the right way from it's forming till getting invoice.
Now we try the Requests menu. We go to Requests. We fill all fields with product id and others. then i open Assign Vendors/Service Agents window, and i can't see and choose any vendors. there is a message:
"No vendor assigned
The request cannot be made because there are no vendors that can be assigned"
Why it is so? Why it is impossible to choose any vendors, and in shopping carts all is OK?
will award points for helpful answers

Hi,
I have exactly the same problem. From which transaction I can create a vendor list?
I have tried with BPH but I can not see the vendor list.
Cheers,
Elo

InCopy/InDesign CS3 Assignment Problem

Hello everyone--
For the past three years we've used Version Cue CS3 for workflow on our publication. For the most part its worked fine. Recently though, we've had to get a new computer for an office on the West Coast and a new router on our office on the East Coast (the operating system we use on the East Coast is Windows XP Profesional.) The computer on the West Coast is running Windows 7, and it seems InCopy CS3 installed on it without a problem--until it came time to do our publication.
The way our system is set up is the West Coast machine uses a VPN tunnel to see our network here--so all it really has to do is connect to the Version Cue server's IP address. This set up worked fine when the machine was a Windows XP based machine, but since the changeover, InCopy doesn't seem to be reading the assignment files correctly. For example, on an Indesign File the copy fits fine and dandy in the layout, and the assignment looks okay when I open it up on InCopy over here. When InCopy opens it up on the Windows 7 machine, the body copy is invariably 3-5 lines over and any formatting changes made from the Windows 7 machine, like changing words to italics, won't be reflected on the updated assignments file. (I confirmed this by emailing our West Coast editor the assignment file directly and InCopy CS3 still wasn't reading it correctly.) Also, at one point we apparently lost some big changes made over the weekend but changes like new headlines held. Any ideas on why this is happening?
Also, and I'm not sure this is related, but since we installed our new RV082 router, we've been getting strange "Version Cue server offline messages" every so often, and then when we go into a project Version Cue suddenly reads it as "online and connected" again. InDesign CS3 often hangs whenever we try to open up a file on the Version Cue server. The only way we've been able to get InDesign to start up is to delete the recovery folders and synchronize everything first--this, needless to say, has been a bit of a time waster.
All our programs are CS3 and except for the West Coast machine, all are running Windows XP pro.
Thanks for your help!

We are installing and using the software under the administrator logins.
My main concern is that we purchased computers that have a processor that is incompatible with Adobe InCopy/InDesign CS3. We purchased two types of PC's, some with AMD Atholon II processors and some with Intel Core2 vpro processors. InDesign/Incopy CS3 were going to go on the Intel's (more power computer) and the InCopy was going to only go on the AMD's.
Prior to receiving the CS3 versions of the software, I hadn't been aware that was the version we were being assigned by our corporate office. After looking at the requirements of CS3 on the adobe site, it only mentions Intel Processors as basic requirements.
(We purchasd the computers with AMD's to save some money....the users requiring InCopy didn't need "as much computer" as the InDesign users).
Could the processor be the problem?

Material Assignment Problem urgent!!

Hi!! All,
I need your help, In a perticular Recipe(PPPI)
I am getting Information message that "Double assignment Exist' I am able to assign materials to Operations but msg is same.
if I remove all assignments... from all operations mgs is still coming
I am nt able to sort out whts the matter.
Looking forward your help
-Asheesh

Asheesh,
Got your problem...looks like the Component is available in the list more than once, if that was the correct scenario you are working with then... <b>in transaction "O05C" define message "C5" - 709 with "W" - Warning or " " - Blank for no message</b>.
Hope this resolves your problem, reward your points and close this thread.
Regards,
Prasobh

"not assign" problem in report for attributes

I have a problem to display attributes in report, both navagational and attribute-only attributes. I checked the Char, which is assigned attributes and attributes' text table and master table. All records are right. I don't know what's problem and how to check where is the problem?
Thanks!!!

You have added this new attributes to an infoobject, add filled with all your data. but you need to activate the master data for this infoobject!
You do this in the RSA1 selecting the infoobject and click with the right bottom and select the activate master data.
After that yoor data is available for working with it.
If i helped you don´t forget the yellow star...
Grettings,
António

Java assignment problem

I'm having a rele annoying problem with my java program i'm trying to write. My teacher has gave us classes to use for an assignment;
type.lib.ToolBox;
type.lib.CreditCard;
each time i import these classes in my main java program an compile it, i get an error, can anyone help me find a solution to this?

that is the error that i'm getting;
Credit.java:2: package type.lib does not exist
import type.lib.CreditCard;
^
Credit.java:3: package type.lib does not exist
import type.lib.ToolBox;
BELOW IS MY ACTUAL CODE
import java.util.Scanner;
import type.lib.CreditCard;
import type.lib.ToolBox;
public class Credit {
     public static void main(String[] args) {
     Scanner input = new Scanner(System.in);
     }

Jump Query Assignment Problem

Hi all,
     I have a problem with Jump query. I have Posting Date (variable of type range) in Source Query. Target Query has Invoice Date (variable of type range). Both Posting and Invoice dates variables are identical. In RSBBS setting in the assignment details I assigned Posting Date variable to Invoice date variable. When I try to jump from source to target it is still asking for the Invoice date. Tried different options in the RSBBS assignment but still no luck.
     Any ideas as to how to send Posting Date variable values to Invoice date values.
Thanks,
Ram.

Bhanu,
      Both posting date and Invoice date are part of selection screen entries in both the queries. I cannot remove it.

BC4JToystore - View and Controller layer problem

I am trying to create a web application based on the BC4JToystore design (MVC) where it seperates each layer into different project.
Here is the problem.
1. when i create a new Struts base JSP (JSP + Action Class) from the wizard on the controller prject/layer, JDev would automactically add the ApplicationResource.properties, define the /transaction, /navigate etc. to my struts-config.xml, add the ###_jpr_War.deploy. Of course, the Action.java + jsp files. So wat i did was, I manually remove the jsp files and add it to the view layer/project. Are there any better way of defining new struts action class/jsp. and how?
2. I understand i would need to deploy my class files to the webroot/WEB-INF. I hav studied BC4Jtoystore where the .deploy profile is defined in the Deployment project. I couldn't quite get it right. I wonder how the developers deploy files from other projects (controller) into JAR files. I notice in the project settings where it onli includes the custom lib of toystores and when u preview the .deploy, they hav got all the class files from the controller project/layer. How u guys do that?
As i couldn't get the Deploymnet project's .deploy profile work, so i define a .deploy profile in the controller layer/project itself. Here is the problem. It took me like 2 minutes to deploy just 1 file. Later i found out in the preview, it has heaps of classes in the archieve content where it includes the libraries i defined in project settings. Is is neccessary as I think these classes already exist in the library. how do i get rid of it if it is not?
Thanz
Tan Steven

It depends on where you call the method. If you call it directly from the task flow you can right click on the method, select 'edit binding' and you get a dialog where you see the method binding. In the lower part you see the input parameters for your methos. There you set the parameter to '#{securityCcontext.UserName}'.
If you call the method from inside a bean via an operation binding you use code like
        OperationBinding binding = bindingContainer.getOperationBinding("doSomething");
        binding.getParamsMap().put("param1", "hello");
        binding.execute();Don't forget to check for errors after calling hte method.
Timo

DB Connect: Infosource assignment problem

Dear Colleagues,
You have been always helpful when needed and I have always given credit to your help. So coming to problem I am facing now...
I am using BW 3.5 and MS SQL as a datasource.
DB connect is successful and now for doing extraction test, I have created one table in MS SQL and trying to load that table in BW. Created the DB source system, tested successfully, created Infosource and assign datasource to Infosource. Data target is also created. Till then everything is find.
Now while loading the data, in monitor it gives the error "<b>No mapping available for DataSource 6DB_XXXX. Assign an InfoSource. Error in Source System</b>". Whereas Datasource assignment to Infosource is created and activated successfully.
I search the entire forum, but did not get any proper solution for this.
Please do help.........
Regards
Pankaj

Pankaj,
If you deleted and then made again an assignment it wouldn't help.
There is something wrong with your DS. You need to regenerate it again. For this you need to delete an IS-DS assignment first. After that you'll generate a DS again. Then make a replication.
Don't know why you couldn't see a replication option. Do you see something like "Select tables"?
And how did you create a DS?
Best regards,
Eugene
Message was edited by: Eugene Khusainov

Controller Assign Problem

Similar Messages

Maybe you are looking for