Controller assignment not seeing certain functions

Hi,
I'm currently assigning controls to my ms20 controller for the arturia jupiter 8 plugin.
Most things are 'learning' no problem, but there's a couple that logic just won't see. Thery're pretty straight forward ones too on the jupiter 8 interface - wave shape - for example.
I'm sure i mapped them before which is weird.
Is there anything i can do here to get logic to see them?
Thanks in advance for any help and advice.
Tom

Definitely. I just figured I would post about it (search didn't find any old posts about it).
It has the feel of an unfinished project. I'm sure that is what happened. I doubt they will try to fix that area in any Logic update. It needs to be reworked entirely.

Similar Messages

IMovie '09 does not see certain pictures in iPhoto

I made some panoramic pictures from other images taken and added them to my iPhoto '09 library. iMovie doesn't seem to see these pictures, even though they are saved and accessible in iPhoto. Everything is updated and I have tried closing and reopening both applications as well as restarting my computer. Does anyone have any ideas, or is there another way to import these pictures?
Thanks!

Hello, iMovie Student.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would suggest going through when experiencing this issue.
iPhoto 6 and later: Rebuilding the iPhoto library
http://support.apple.com/en-us/HT201769
Cheers,
Jason H.

Aperture import does not see files on hard drive

This happens again and again, and it's EXTREMELY irritating.
I am trying to import some existing JPEGs on my Desktop. When I try Import in Aperture, the file browser simply does not see most files and folders. Sometimes it does and sometimes it doesn't. It seems to happen on a whim. This is very bad, I have just about had it with Aperture. And yes, permissions are set correctly.
Can anyone figure out on what basis Aperture sees or does not see certain files/folders?

I am trying to import some existing JPEGs on my Desktop.
Do you mean your Desktop folder? And is the Desktop folder the only folder that is showing this behaviour? I have never had problems to open images directly from the Desktop. Have the image files been dropped directly onto the the Desktop or into a subfolder of the Desktop?
Previous MacOS X versions had problems with a huge number of files on the Desktop because this folder has been treated in a special way.
Which version of Aperture and MacOS X are you using?
It might be a problem with permissions or file ownership.
If the problem with your Desktop folder persists you could try to reset the permissions,ownership, and access control lists on your Home folder as described in Linc Davis's post here: Re: iPhoto returns OSStatus error -54
Have you by any chance encrypted your Home folder by File Vault?

I can not see all "Divisions" in BP Rel.--Partner Function Assignment

Hi,
When I edit "Partner Function Assignment" in BP reliationship such like BUR011("Employee Responsible"),
I can not see all "Divisions" in list which I can see in configuration via SPRO-->Customer Relationship Management->Master Data->Orgnizational Management->Division Setting->Define Divisions.
E.g., in configuration, I can see 7 records of divisions from "001" to "007", but in "Partner Function Assignment" of BP relationship, I can only see "002" to "004".
Do you know why? Thanks a lot!
Best regards,
Long

hi
that should not be happening,if they are visible in one client then should be there in another too
do one things try run this
hrbc1_atributes_buffer_update
it will refresh the buffers of your org structure and then you may be able to add this
also check the check box where it is mentioned that"object determination should be permitted"
remember it will run only for once after you run this the check box will be unchecked again
i guess it may solve your probs
also try to structure your org structure index
use t code
crmd_index_om
and withtin the object type give O
and execute
best regards
ashish

Customer is not assigned to a partner function

Hi Experts,
I'm encountering the same error. When I view the Customer and click Customer Partner Functions, system throws a message Customer SP0003 is not assigned to a partner function
How do I assign my newly created Customer to a Partner Function Sold-to-Party?
I've checked the setup for Partner Determination: Customer Master, the settings are as follows:
Partner Determination Procedures:
AG Sold-To Party
IN Sales Prospect
KO Consumer
RE Bill-to Party
RG Payer
SO Assortment cust.
WE Ship-to party
WESR GR w/ MatSafSheetRec
Partner Functions in Procedure:
AG SP Sold-to party NotModifiabe, Mandatory
AG BP Bill-to party Mandatory
AG PY Payer Mandatory
AG SH Ship-to party Mandatory
Partner Determination Procedure Assignment:
Account Group YG01 (account group of new Customer) assigned to AG (Sold-to-Party)
Account Groups - Function Assignment:
SP Sold-to party YG01 Customer BP
Is there any other config I should do?

Go to IMG path -- SD --> Basic Functions --> Partner Determination --> Setup Partner Determination --> Set Up Partner Determination for Customer Master.
- There block "AG Sold To Party" and double click on "Partner Functions in Procedure".
- Ensure that for AG, you have maintained SP and the box Mandatory is checked.
- Block AG/SP and double click on "Partner Determination Procedure Assignment" and see for Group 0001, AG is assigned
- Click on "Partner Functions" and see for SP, KU is maintained under the tab Partner Type and the box is checked
- Click on Account Groups-Function Assignment. Here ensure that the Account Group are assigned to your SP.
thanks
G. Lakshmipathi

EAM Controller is not able to see FFLOGs in Reports & analytics tab

Hello Team,
We have recently configured GRC 10.1. Currently we are testing the configuration and We have observed that EAM Controller is not able to see FFLOGs in Reports & analytics tab but administrater is able to view the logs.
Has anyone faced thiss issue earlier. Please help me to get it resolved.
Thanks,
VIJEI

Hi Ameet,
Thanks for quick reply.
I have assigned the custom roles of below SAP standard roles to EAM Controler ID
SAP_GRAC_BASE
SAP_GRAC_NWBC
SAP_GRAC_SUPER_USER_MGMT_CNTLR
SAP_GRC_FN_BASE
SAP_GRC_FN_BUSINESS_USER
Please let me know do i need to add any other roles or add Auth object to the roles.
Thanks,
Vijei

Brand New RD240 ThinkServer can not see the LSI 8708EM2 RAID Controller During Bootup

I have a brand new out the box RD240 ThinkServer that can not see the LSI 8708EM2 RAD Controller it came with. This RAID controller simply does not want to function. This RAID Cntroller does not show up during the boot up and I even tried putting in a different slot in the riser card, thinkn maybe it was a bad PCI-e slot, but made no difference. Also the Lenovo Easy Setup software does not find this controller either. So I'm wondering if there is an issue with the RAID Controller or is it a bad Riser card? Does anyone have any idea's on what can be done or what I may be missing?

For a list of Warranty Support contact numbers, please visit:
http://support.lenovo.com/en_US/feedback/detail.page?LegacyDocID=MIGR-76613
In the U.S. you can call: 1-800-426-7378

Why users are not able to see certain printers even though they are in the Airgroup server table

Q: Why users are not able to see only certain printers even though they are in the Airgroup server table ?
A: In certain scenarios we may notice printers come up under the server /cache entries on the controller.
However when an airgroup user does search for printer, they may not see all the printers, certain printers may be not visible .
This is because the service IDs sent by the user in the MDNS query are not broadcast by these printers
In the below capture the Ipad sends query for service id "_universal_sub_ipp_tcplocal" and "_universal_sub_ipps_tcplocal" and hence the controller will
respond with the printers that broadcasts these service ids.
Non–Visible printer :
_printer._tcp.local PTR IN 7200 10.125.30.223 5820.05 Wed Mar 18 13:24:26 2015
_pdl-datastream._tcp.local PTR IN 7200 10.125.30.223 6112.25 Wed Mar 18 13:24:26 2015
_ipp._tcp.local PTR IN 7200 10.125.30.223 5888.15 Wed Mar 18 13:24:26 2015
_http._tcp.local PTR IN 7200 10.125.30.223 6293.88 Wed Mar 18 13:24:26 2015
NPIED487E.local A IN 240 10.125.30.223 194.43 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local SRV/NBSTAT IN 240 10.125.30.223 209.87 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 205.14 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 197.18 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 196.42 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 208.15 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._pdl-datastream._tcp.local SRV/NBSTAT IN 240 10.125.30.223 207.35 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._pdl-datastream._tcp.local TXT IN 240 10.125.30.223 200.64 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._ipp._tcp.local SRV/NBSTAT IN 240 10.125.30.223 209.44 Wed Mar 18 13:24:26 2015
Visible-printer :
_printer._tcp.local PTR IN 4500 10.125.26.29 3745.82 Wed Mar 18 13:24:51 2015
_universal._sub._ipp._tcp.local PTR IN 4500 10.125.26.29 3694.14 Wed Mar 18 13:24:51 2015
_ipp._tcp.local PTR IN 4500 10.125.26.29 3628.81 Wed Mar 18 13:24:51 2015
_pdl-datastream._tcp.local PTR IN 4500 10.125.26.29 3616.14 Wed Mar 18 13:24:51 2015
_http._tcp.local PTR IN 4500 10.125.26.29 3793.56 Wed Mar 18 13:24:51 2015
XRX9C934E25C52D.local A IN 120 10.125.26.29 355.03 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._printer._tcp.local SRV/NBSTAT IN 120 10.125.26.29 130.45 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._printer._tcp.local TXT IN 4500 10.125.26.29 3670.33 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._ipp._tcp.local SRV/NBSTAT IN 120 10.125.26.29 389.55 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._ipp._tcp.local TXT IN 4500 10.125.26.29 3640.60 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._pdl-datastream._tcp.local SRV/NBSTAT IN 120 10.125.26.29 210.97 Wed Mar 18 13:24:51 2015
In order to learn other printers we may need to use specific app provided by printer vendor on the client or configure the printers to send these service IDs.

The net 451 issues made it not work after a while but it affected the entire RWW site not just remote access:
http://blogs.technet.com/b/sbs/archive/2014/01/13/troubleshooting-an-unexpected-error-occurred-message-when-using-remote-web-access-to-connect-to-computers.aspx
Careful if you try and uninstall it, you'll need to put back net 4.0 and reconfigure some stuff.
Did it ever work?
Make sure the users have installed the certificate they need and turn on compatibility mode in IE (also make sure IE isn't locked down and disabling activeX).:
https://technet.microsoft.com/en-us/library/dd701173%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
-- Al

My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything

My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything, I have a child that is very ill and I have to have access to a phone at all times can someone help me? It happened one other time when I plugged it in to my to listen to music. I know it is working it said something on voice control. I tried the press the circle button and the top button but the screen only turned white?

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

Assign Task is assigned to a specific user but the she can not see it in her ToDo list

Hello,
I am currently working on the first process (after upgraded it to LC ES 2 with SP2) and try to test by routing it to the next person but the user could not see it in her ToDo list nor receive any Task email.
I checked for the process in the AdminUI and see that it is currently assign to that user and also check the email configuration but do not see any thing wrong. I also recorded it and see it is assign to that person. I then try to re-assign it to a different person but it still does not show in the next person's ToDo list. So I go to the log file and see there is an error as below:
00000078 UserServiceIm W com.adobe.idp.taskmanager.dsc.userservicev2.UserServiceImpl createTaskFromDialogProperties WARNING!!! You have not specified any Form TLO/DCI settings, and have not specified any input data. This task will be created without any form.Process: 1515F/1515F, Step Name: AssignTask0
I tried to search for the error above but could not find any thing reference to it.
Can any one please advise on how to fix it so the user can see it in their ToDo list when the task is assigned to them.
Thanks,
Han Dao

Hi
It sounds like you have not selected anything on the Presentation & Data tab of the Workspace Startpoint/User Service.
You need to specify:
Your Asset (the form you want to present to the user)
An associated Action Profile (tells the server how you want the form rendered...typically it is set to Default which uses the Render PDF Form process)
The variable to hold your data(typically an xml variable)
Make sure these are set.
Diana

I do not see the DAQ Assistant Express on Functions Input palette.

Software config: Windows XP machine, Traditional NI-DAQ 7.4.4 for PCI 6602. I do not see the DAQ Assistant express on Functions>>Input palette. I get error message when I place the Instrument I/O assistant on the block diagram:-" Measurement and Automation Explorer or Instrument I/O Assistant not installed correctly. Please install from LabVIEW CD". I've tried uninstalling, re-installing driver and rebooting my computer several times.

Hello PJ-SJM,
The DAQ Assistant Express VI installs with the NI-DAQmx Driver and not Traditional NI-DAQ. The good news is that the PCI-6602 is supported in both Traditional NI-DAQ and NI-DAQmx. Check this KnowlegeBase article to find out what version of NI-DAQmx you need and then search the Drivers and Updates page for to find the version you need. Once you download and install the driver you should see the DAQ Assistant Express VI on your functions pallet.
The Instrument I/O Assistant is not for use with DAQ cards, it is for using other communication protocol like serial or GPIB. However, if you need this you can install the Device Driver CD and it should work after that. Note: The device driver CD that came with LabVIEW should also contain the correct version of NI-DAQmx.
I hope this helps, and have a great Friday!
Brooks

ORA-04091: is mutating, trigger/function may not see

I am getting this error
ORA-04091: table SATURN.SARQUAN is mutating, trigger/function may not see it
ORA-06512: at "BANINST1.F_GETSARQUANSEQNO", line 24
ORA-06512: at "BANINST1.F_GETSARQUANSEQNO", line 30
I am trying to do this insert
INSERT INTO sarquan
                        (sarquan_pidm,sarquan_term_code_entry,sarquan_seqno,
                         sarquan_appl_no, sarquan_question,
                         sarquan_answer, sarquan_activity_date,
                         sarquan_user_id
                SELECT spriden_pidm,'201090',BANINST1.F_GETSARQUANSEQNO(spriden_pidm,'201090','1'),'1',
                 'Would you prefer September admission?',
                DECODE (szcasup_sept_adm, 'Y', 'Yes', 'N', 'No'),sysdate,'rmanoei'
           FROM saturn_midd.szcasup, saturn.spriden
          WHERE spriden_id = szcasup_common_appl_id
            AND spriden_ntyp_code = 'CAPP'
            AND (   szcasup_sept_adm IS NOT NULL
                 OR szcasup_feb_adm IS NOT NULL
                 OR szcasup_interview IS NOT NULL
            AND NOT EXISTS (
                   SELECT *
                     FROM sarquan
                    WHERE sarquan_pidm = spriden_pidm
                      AND spriden_ntyp_code = 'CAPP'
                      AND sarquan_term_code_entry = '201090');
                      I got data when I ran just the select statement, none of the records have data in the sarquan table.
I got data when I select from this function
,BANINST1.F_GETSARQUANSEQNO(spriden_pidm,'201090','1'),'1'
Any ideas?
Edited by: peace4all on Aug 12, 2009 4:49 PM

I can not drop the trigger, I don't own the trigger, it is in production, SARQUAN is a production table
Now I am getting this error ORA-04091: table SATURN.SARQUAN is mutating, trigger/function may not see it
ORA-06512: at "BANINST1.F_GETSARQUANSEQNO", line 24
ORA-06512: at "BANINST1.F_GETSARQUANSEQNO", line 30
ORA-06512: at "SATURN.ST_SARQUAN_INSERT_ROW", line 2
ORA-04088: error during execution of trigger 'SATURN.ST_SARQUAN_INSERT_ROW'
when I do the following
I know that this pidm does not have any records in the table SARQUAN
spriden_pidm = 2287953
So I try to do a simple insert, not using the function, now I am hardcoding the seq, I know it needs to be 1 since there are not records in that table yet,
the sequence go by pidm
INSERT INTO saturn.sarquan
                 sarquan_pidm,
                 sarquan_seqno,
                 sarquan_term_code_entry,
                 sarquan_appl_no,
                  sarquan_question,
                 sarquan_answer,
                 sarquan_activity_date,
                 sarquan_user_id
SELECT spriden_pidm,'1',
'201090','1',
                 'Would you prefer September admission?',
                DECODE (szcasup_sept_adm, 'Y', 'Yes', 'N', 'No'),sysdate,'recheverri'
           FROM saturn_midd.szcasup, saturn.spriden
          WHERE spriden_id = szcasup_common_appl_id
            AND spriden_ntyp_code = 'CAPP'
             and spriden_pidm = 2287953
            AND (   szcasup_sept_adm IS NOT NULL
                 OR szcasup_feb_adm IS NOT NULL
                 OR szcasup_interview IS NOT NULL
            AND NOT EXISTS (
                   SELECT *
                     FROM saturn.sarquan
                    WHERE sarquan_pidm = spriden_pidm
                      AND spriden_ntyp_code = 'CAPP'
                      AND sarquan_term_code_entry = '201090');
                      Edited by: peace4all on Aug 13, 2009 5:35 AM

ORA-04091 table string.string is mutating, trigger/function may not see it

When I am tending to delete something from my table I received this message.
I defined a PL/SQL function reads data from that table. Is that meaning I could not modify anything in table once I have some PL/SQL defined on that? It sounds ridiculour. Or I missed some points?
Anyone could help me out?
Many thanks,
Qiang

In get_point_coordinates(point_id, layerid), it does not have any codes deleting thing from point_tab.
Its functionality is to find out that specified point;
put its coordinates into SDO_GEOMETRY object and return as function value.
However, oracle does not allow me to delete any data from point table since then.It is saying that function (get_point_coordinates) can not know mutating tables.
When I run delete task:
delete from point$_view where point_id = 1;
I got errors:
ERROR at line 1:
ORA-04091: table POINT$_TABLE is mutating, trigger/functio
n may not see it
ORA-06512: at "GET_POINT_COORDINATES", /* THIS LINE REPORS ERROR*/ Look at codes below.
The following is code of function: GET_POINT_COORDINATES
FUNCTION GET_POINT_COORDINATES(pPoint_ID IN NUMBER, player_ID IN NUMBER)
RETURN MDSYS.SDO_GEOMETRY DETERMINISTIC IS
PSRID NUMBER :=NULL:
PLON NUMBER := NULL;
PLAT NUMBER := NULL;
CURSOR get_lonlat(ppoint_id IN NUMBER, player_id IN NUMBER) IS SELECT LON,LAT
FROM POINT$_VIEW /* THIS LINE REPORS ERROR*/
WHERE player_id = layer_id AND ppoint_id = point_id;
BEGIN
PSRID := 8265;
OPEN get_lonlat(pPoint_ID,Player_ID);
FETCH get_lonlat INTO PLON, PLAT;
RETURN MDSYS.SDO_GEOMETRY(2001,PSRID,MDSYS.SDO_POINT_TYPE(PLON,PLAT,NULL),NULL ,NULL);
END GET_POINT_GEOM;
I guess it has nothing with foreign key. There is something wrong with this function.
By the way, a spatail index is built on this function. Does this make any differences on this point?

ORA-04091: table AM is mutating, trigger/function may not see it

I create this trigger:
CREATE OR REPLACE TRIGGER pr_test
after insert ON AM
FOR EACH ROW
declare
appo_pr varchar2(64):= null;
BEGIN
select name
into appo_pr
from AS
where AS_ID=:new.AS_ID;
insert into AM (name) values (appo_pr);
END pr_test;
I insert before a new AS_ID and name in tab AS but when I insert a new record in tab AM I get this error:
ORA-04091: table AM is mutating, trigger/function may not see it
ORA-06512: at PR_TEST", line 11
ORA-04088: error during execution of trigger PR_TEST'
I'd like to create a trigger that when I insert a new record in AM It verify the value in col name of AS and insert this value in col name of AM.
What I wrong in this trigger??
How can I modify it??
Thanks
Raf

Try this:
CREATE OR REPLACE TRIGGER pr_test
before insert ON AM
FOR EACH ROW
declare
appo_pr AS.name%TYPE;
BEGIN
select name
into appo_pr
from AS
where AS_ID = :new.AS_ID;
:new.name = appo_pr;
END pr_test;

ORA-04091:table XYZ is mutating,trigger/function may not see it ORA-06512

Hi everybody
i am facing mutating problem during data deletion fron XYZ table as
ORA-04091:table XYZ is mutating,trigger/function may not see it ORA-06512 at "user.procdure_name",line 39 ORA-065
i have table XYZ and have database trigger on this table
and also have procedure "user.abc" in this procedure m selecting data from xyz table

You didn't post the actual code. I was more interested in seeing table name and the trigger body.
Anyways, mutation problem comes when you refer the same table on the trigger, on which it is based for some data manipulation on that table.
For e.g, If inside your trigger body, you are doing INSERT on the same table, then it'll definitely result in mutation problem because this trigger will be fired endlessly (as it is after insert trigger).
Please mark answer as helpful / correct, if it helps you
Navnit

Controller assignment not seeing certain functions

Similar Messages

Maybe you are looking for