Controller IDE driver for 6367 and WinXP

Hi,
I have install winXP on a pavilion with ms 6367 mainboard
I find the driver of audio, eth, .. of the nforce chipset but windows xp see the controller IDE like a Controller IDE standard.
Anyone Know where Can I find the driver for the IDE Controller?
I try all on the nvidia site and on msi site with no result

Your motherboard uses an nforce chipset. It appears that the motherboard was built for the OEM market. Here is a link for the nvidia chipset driver packafe that had the IDE drivers included. You need to get all bios updates Hewlett Packard site since MSI doesn't appear to list it on their site.
http://www.nvidia.com/object/nforce_udp_winxp_5.10.html

Similar Messages

How to format an external drive for mac AND pc use

i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
can i partion one part for ms-dos and part for macos extended?
cheers
-j-

MS-DOS format (or FAT32) will be fine for both Mac and PC. However there is a 4GB file size limit with FAT32.
You could use a dual partition, however the HFS+ partition would not be readable by the PC unless you installed the third party MacDrive.
Look at this page for more information on a dual partition drive for Mac and Windows.
http://macosxhints.com/article.php?story=20030613121738812
iFelix

Best way to format my 16GB flash drive for Mac and PC transferring large power point files?

best way to format my 16GB flash drive for Mac and PC transferring large power point files?

format flash drive in Exfat for transferring files between Mac and Pc.
FORMAT TYPES
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64)
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details.

Use external drive for windows and mac

Hello,
I just bought a external 320Gb Western Digital Drive. I would like to use
the drive for windows and mac.I will not like to make partation on the drive
to use it on both operating systems. Is there any formating system with which i can use in both operating systems? I would like to use time machine feature on that drive also.
Thanx.

If you want to use a disk for both PC/Mac file storage and Time Machine, you will have to create two partitions. Partitioning is sort of like creating multiple virtual disks on the same physical disk. One partition should be formatted for PC (which the Mac can also use) and the other should be formatted for HFS+ (Mac only) which is what Time Machine requires. The Disk Utility application makes partitioning and formatting very easy.

I have a new Mac Pro. I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro. How do I set up the old computer?

I have a new Mac Pro. I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro. How do I set up the old computer? Both computers have OS X10.9.3. Currently they are connected by a Firewire 800 cable.

You certainly could keep the old Mac Pro in Firewire mode (hold down the T key on its keyboard as you boot) to show its drives on the new MP. This is basically as fast as putting the drives into a Firewire enclosure.
Or you could boot it normally and share its files over the network using the Sharing panel of System Preferences. If you turn on both File and Screen Sharing, you don't even need to have a monitor attached - you can do all administration using screen sharing. However, this method requires that you open all files over the network, which will be slower than the direct-connect method above, and may also not work with all applications.
Matt

Missing *.inf driver for 2605dtn and windows 7 64 bit

missing *.inf driver for 2605dtn and windows 7 64 bit
I just piurchased a new HP laptop with windows 7 64 bit installed. I do not have any windows 7 disks.
Where do I obtain the necessary drivers for this printer?

HI RandyJohnson,
You do not need to download drivers for this product. Print drivers for your product are available within the Windows 7 operating system. Use Devices and Printers, formerly known as the Add Printer Wizard, to obtain the Windows 7 update. For more information, go to Install the Printer Driver through the Windows 7 Operating System (c02536257) (in English).
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

When is Apple will make a Micro USB Flash Drive for iPads and iPhones ???

IIt's really a big help if Apple make their own Micro USB a Flash Drive for iPads and iPhones.

Apple would not tell people there are other brands on the market. It is my opinion that if Apple users keep asking for the USB for ipads, they might consider it. As for the iphone there MIGHT be a tiny slot inside where the battery is for an SD card, which expands the space. I know Android has that feature in their cell phones, but not sure about Apple.

Itunes 8 "Drive for importing and burning CD/DVD are missing"

I downloaded ITUNES 8 two weeks ago and, like many, have been receiving this message since. THE REGISTRY SETTINGS USED BY THE ITUNES DRIVER FOR IMPORTING AND BURNING CD'S AND DVD'S ARE MISSING. Can anyone offer a fix/solution? (BTW...When I downloaded ITUNES 8, it also blew away QUICKTIME).

Take a look at this link
http://www.gearsoftware.com/wiki/index.php?title=CD/DVDdrives_disappear_after_installingiTunes
I was having the same problem...actually for the last year and I found this info last week and followed the info and now so far everything is good. I finally can burn a cd in itunes and all my cd,dvd and media drives are in place and working.
Hope this helps for some one.....

Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub

Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub that serves as a good router. 3gb or 4gb capacity preferred but 2 would suffice.

Plug a NAS into the BT Hub that does TM. Look at Synology.
You just use the wireless of the hub.
But the cheapest solution is still the TC.

New external drive for mac and windows

Hello,
I am looking to buy a 500gb maxtor external drive. Partition it 250gb for winxp and 250gb for my imac. I am really looking to make these drives as backup drives. I currently have an old 250gb (not all used) formatted as os x entended. I use it for all my itunes, photos, movies... photoshop, you get the picture... I just want to drag and drop to that drive. The same for my windows.
Does this sound correct? Has anyone done it this way?
Another way, would be to have it formatted for windows and drop and drag into two different folders : win and imac. But then I will be losing the naming conventions from the os x? isn't that why and want to use os x extended?
Thanks for all ideas,
Charlie

Piece of cake!
For those who want to know:
usb connection to imac first. I started disk utility. Split the partition to two parts and formated only one partition as OS X extended. After done, copied my directories as a bkup.
usb connection to windows. I started computer management and saw that the usb disk had two partitions: the first was healthy but unknown. That was ok, I wanted the second partition to be NTFS and formated. Then copied my directories to that drive as well.
Connected back the imac and saw both partitions, imacbkup and winbkup. I forgot, just like what I do with the imac and winxp, I can see the c: drive via the mac.
Very cool and easy. Maxtor drives are very reliable and easy to use.
Thanks,
Charlie Cooperman
If anyone wants more detail info, you can email me at [email protected]

Formatting external Hard Drive for Mac and PC Access

I have a USB External HD by Seagate that I want to add to my Airport Extreme BS that creates my LAN for a Mac PB, WinXP laptop and HP OfficeJet printer. The disk is currently formatted as NTFS and I don't think a Mac can read that. My HD manufacturer (Seagate) told me 1) FAT32 is unstable for PC and/or Mac usage and 2) my 300GB Pushbutton HD (3 years old) "will not work" on a LAN.
I think both issues are BS as they now have the Maxtor "network HDs" to sell. Any truth to this??
Second question: Seagate forums suggested that I format HD to FAT32 or Mac format and then buy "MacDrive" software so the PC can read/write to the drive. Same question: BS or truth.

I think there is a decent amount of BS in there...
I have a USB HD that came out of the box formatted as FAT32- both my MacBook Pro and PC laptop can read & write to it just fine. I haven't had it long enough to comment on stability, but haven't had any issues yet. I don't have any special software on the PC, either- I think the info from the Seagate forums sounds like people remembering the "old days" of Windows 98 and pre-OS X systems, when you did need software like that for true cross-platform drive access.
As for the drive not working on a LAN- well, the hardware doesn't know the difference, so as long as it's connected via USB to the AEBS, it's fine. What could cause an issue would be your PC OS version. I have found WinXP to be really good (well, for a Win OS, anyway) at playing nice with others. Vista is a train wreck for many, many reasons, but may be OK for this too. Anything earlier than XP may be a bit more troublesome.
Hope my 2 cents helps...

External Hard Drive for Mac AND PC

I need to purchase an external Hard Drive to be able to back up both my iMac and my partner's PC. I am currently looking at buying either:
Iomega UltraMax Hard Drive 500GB FireWire 400/USB 2.0
OR
Iomega 500GB Minimax Hard Drive with Dual Interface + USB/FireWire Hub
Can anyone tell me is it possible to format either of these Drives to be able to accept both Mac and PC, and if so, do either of these drives let you have a permanent connection to both at the same time, so they can be set up and left to do their backups automatically without always swapping cables over etc.
Does anyone have a preference between these drives?
(Oh, and for info, I won't be using Time Capsule as I only have 10.3.9!)
Thanks

I think there is a decent amount of BS in there...
I have a USB HD that came out of the box formatted as FAT32- both my MacBook Pro and PC laptop can read & write to it just fine. I haven't had it long enough to comment on stability, but haven't had any issues yet. I don't have any special software on the PC, either- I think the info from the Seagate forums sounds like people remembering the "old days" of Windows 98 and pre-OS X systems, when you did need software like that for true cross-platform drive access.
As for the drive not working on a LAN- well, the hardware doesn't know the difference, so as long as it's connected via USB to the AEBS, it's fine. What could cause an issue would be your PC OS version. I have found WinXP to be really good (well, for a Win OS, anyway) at playing nice with others. Vista is a train wreck for many, many reasons, but may be OK for this too. Anything earlier than XP may be a bit more troublesome.
Hope my 2 cents helps...

Tricky stuff: formating hard drive for Mac and Windows

Don't know how to format an external USB hard drive for these purposes:
#1. Store a bootable backup for my MacBook (Intel)
#2. Must be readable and writeable by both Mac OS 10.4 and WinXP (mainly for file storage)
Can I do 2 partitions, with Mac OS Extended (journal) + GUID to serve purpose #1, and MS-DOS + Master Boot Record to serve purpose #2? My research suggests no, it seems both volumes must use either GUID or MBR? Thanks

Hi,
I have two Western Digital external HDs with nearly exactly these specs.
Partitioned them with GUID partition scheme and have Partition 1 as bootable OSX clone and partition 2 with FAT32 for file storage/sharing between OSX and Windows.
So, what you want is what I have/use right now.
Regards
Stefan

How to partition my drive for Mac and XP use? from a novice

I would like to use my MacBook Pro for both Mac ad PC programs (Office and others) and hear that I can partition the drive. How is the best way to do that? Also I have an external Seagate FreeAgent GoFlex external drive to set up that supposedly can back up both Mac and PC without formatting each time. Do I have to partition the drive first? Do I use Time Machine?

Is it your intent to run Windows programs on your computer? If so then this is more than simply a partitioning exercise.
In order to use an external drive on both Macs and PCs there are two options. Option One is to partition and format the drive MBP and FAT32, respectively. OS X can read/write a FAT32 formatted drive. However, due to filesystem differences some features of the OS X filesystem are not supported by FAT32, so FAT32 is not the best choice for transferring OS X documents, but would be fine for transferring Windows documents.
Option Two is to partition the drive using GUID then creating two partitions. One partition is formatted Mac OS Extended, Journaled and the other partition is formatted FAT32. Each partition can be used for the data from the appropriate platform.
TM is not a file transfer program, cannot be used for Windows documents, and does not work on Windows.
If you wish to run Windows on your Mac then see the following:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
1. Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
4. CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system.
See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows. You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Partitioning Drive for Mac and PC to deliver 10GB video file

I need to deliver several video files to a client on a drive.
Because some of the clips are over 10GB I cannot use the drive in its current FAT state.
I want / need the drive to be read by both Mac AND PC.
If this is the case, and I cannot use FAT, should I partition the drive into TWO partitions?
If so, should I then make one partition for Mac and the other for PC... then upload the video files twice, once to each partition?
Is there an alternative? How do I make the drive partitioned for both allowing the video to be ready by both Mac and PC.
Can I do what needs to be done using Disk Utility?
What 2 formats should I use? Is MS-DOS (FAT) the windows based partition, and is that the only one? And won't that not work for my issue of needing to load a file over 4 gigs?
What partition scheme do I want? It appears I can only use one partition scheme... or is this incorrect?
I'm using Mac OS X 10.5.5
Computer is Mac G5. Drive is the WD 250GB passport.
Thanks

If you format the drive as Microsft NTFS, there will be no problem with split files.
[NTFS-3G 2009.4.4 Driver|http://macntfs-3g.blogspot.com>
[Instructions|http://hem.bredband.net/catacombae/ntfs-3g/macntfs-3g_userguide.pd f] Be sure to read them!
The PC needs to be running Win NT, 2000, XP, Vista etc to read the NTFS format.

Controller IDE driver for 6367 and WinXP

Similar Messages

Maybe you are looking for