Controller question

Hello, help change the control questions in my profile. I forgot my initial responses and now I can not change their questions. Now I can not use the services of the store AppStore. TY.

We cannot do that for you; we're just volunteer users here. Here's an article that may help.
http://support.apple.com/kb/ht5312

Similar Messages

Windows Server Primary & Secondary Domain Controller Question

lulzchicken wrote:
Right now the DHCP is assigning 192.168.200.1 (DNS server) and 8.8.8.8 (Google's DNS) as DNS servers for each client. I don't necessarilly want to change these assignment settings,Yes, you do. This is absolutely the worst thing you can ever do with DNS. More details why here -> Ramblings of a Sysadmin: How to do DNS correctly
Primary and secondary DNS should ALWAYS be internal.
Your DNS Servers should use FORWARDERS go go out to google. That's the only place that should see google DNS servers in your environment.

Hi everyone, thank you for taking the time to listen.
I have successfully implemented an Active Directory setup using a Primary DC and a Secondary DC with Windows Server 2012 R2.
EL1 is my PDC and EL2 is my BDC.
Active Directory is in sync among the two Domain Controllers. Here is my question:
If I were to have a policy (Group Policy) that sets the wallpaper of each client machine to whatever is in the "\\EL1\Wallpaper\wp.jpg" - what would happen if I were to have that Domain Controller fail? That directory is no longer available due to the outage - even though the Backup Domain Controller will still be pushing out the policy (pointing to the down server).
My idea was to have that directory replicated on the Backup Domain Controller, "\\EL2\Wallpaper\wp.jpg" however - the policy will still be looking for the file in the Primary Domain...
This topic first appeared in the Spiceworks Community

Upgrading Domain Controller Questions

Hello, we currently have 2 domain controllers in our environment, both with Server 2003 R2. We are looking to upgrade them one at a time to 2008 R2 but I have some questions.
Here's the environment:
Server 1 (the one we are going to upgrade first):
Server 2003 R2
Domain Controller
DHCP Server
DNS Server
Server 2 (we will be upgrading this in the near future but not just yet):
Server 2003 R2
Domain Controller
DHCP Server
DNS Server
File Server with most of the company data
We also have DNS replication set up between the two servers.
My questions:
Will we run into any issues having two domain controllers with different Operating Systems?
We would like for the domain controllers to keep the same names and IP's. Any issues with that?
How will we stop, then re-setup DNS replication between the two servers?
Any other 'gotcha's' we should be aware of?
Dan Chandler-Klein

I don't see any reason why not keeping old name and IP.
Before upgrading make sure AD has no issues:
look at the event viewer, run DCDiag, replication runs clean (repadmin /showrepl) etc.
OS has no warning/errors.
Not must but I would move the FSMO roles to another DC before demote.
Make sure applications installed on the new DC's (AV\Backup agents etc.) support Windows 2008 R2 OS.
Make sure all your network applications in your environment support working with Windows 2008 R2 DC - I recommend test it in lab first.
Make sure that the DC you are about to demote not holding CA role.
Most important:
Make sure you successfully demote the old DC and no records left in DNS.
I'm not agree with evrimicelli about DC's naming and I wouldn't go for CNAME record - this can get you in many troubles in the future.
after demote the old DC, I would rename it or remove it from the domain, than you can rename the new server with old Dc name and promote it to DC with old DCs' IP address.
I didn't understand the question about DNS replication.
What kind of DNS zone do host? if its AD integrated (and thats what you should have), you don't need to configure any replication, AD integrated DNS zone replicate as part of AD replication between your two DC's.
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

Cisco Aironet 3502i and Virtual Wireless Controller- Question

Hello everyone,
As soon, I purchased two Cisco 3502i and Cisco 1142 however, two issue are that I don't have controller and smartnet. As my purpose, it using for Home Use but house with 2,500 Sq ft with two floor and new 24x24ft garage with two floor. I put two Cisco 3502i for garage and one cisco 1142 in house on second floor. Separated for multi media, gaming, streaming high resolution video, parts, and downloads programmings online. It will run with Cisco Catalyst Express 500 with 24 ports (4 POE) and two gigabit ports. In house, it have Dell Poweredge 2850, Cisco Catalyst Express 500 with 24 ports POE and 2 ports gigabit.
I thought to make my own developing with my first time using Wireless Controller. I wanted to try out with Virtual WLC on Dell Poweredge 2850 running ESXi 4.1.
Specs for Dell Poweredge 2850:
- 2x Intel Xeon Dual Core 3.8 GHz
- 4GB RAM (Will upgrade to 12GB soon)
- 2x 146GB and 2x 36GB SCSI
- 2x 1 Gbps built in and 4x 1 Gbps PCI-X
Developing with Untangle and pfSense to make it support with LADP and VLAN to both Cisco Express 500 using 4 gbps PCI-X. I have read the requipment list to use Virtual WLC but it seem met the requipment for my 2850. If someone offer me to get Virtual WLC and IOS from their, I accept to "borrow" it. I do go college which is Rochester Institute of Technology at New York and my major is Applied Computer Technology. I live here at Hampton Road, Virginia. Just in case if you might know about RIT. I just start to learning myself with Cisco books.
I have a question:
- Is there possible to get trial or full version of Virtual WLC?
- Is there possible to get Lightweight or Autonomous IOS for Cisco 1142 and 3502i?
- Does it supported Dell PowerEdge 2850?
- Does 3502i support Autonomous? (Not actually but I have researched around online about that it will work with 1262's IOS)
Thanks
Gage

Answers in-line...
I have a question:
- Is there possible to get trial or full version of Virtual WLC?
No. You will need a SmartNet contract (or a freshly purchased device) to obtain software from cisco. Nobody will provide this to you.
- Is there possible to get Lightweight or Autonomous IOS for Cisco 1142 and 3502i?
No. You will need a SmartNet contract (or a freshly purchased device) to obtain software from cisco.
Nobody will provide this to you.
- Does it supported Dell PowerEdge 2850?
Cisco doesn't go in to great detail regarding the actual Hardware requirements of the vWLC (as far as ESX Host requirements). Primarily, making sure you are running ESX 4.x/5.x is necessary. The vWLC provisions 2Gb of RAM and 8GB of thick provisioned storage, so if your host can accomodate I don't see any reason it wouldn't work.
- Does 3502i support Autonomous? (Not actually but I have researched around online about that it will work with 1262's IOS)
Yes, with the latest versions of IOS 15.2(2)JB, full functionality in autonomous can be achieved on the 1550, 3500, and 3600 series APs
http://www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/15.2_2_JB.html#wp355587

Multiple USB keyboard controller question

hey everyone ... Happy new year by the way !
quick question .. i want to use 2 USB controllers to play one source ( software synth )
I have a USB audio interface with a midi keyboard controller patched in the mdi input jack and would like to use another USB keyboard ( in another available USB port ) to access the same source track .
When I record enable the track with the instrument , my midi controller can the synth but the USB one won't
I checked the audio midi setup utility and coreMidi recognizes both midi inputs but Logic Pro X won't
Does this has to be set up through the environment window of Logic ? I thought that coreMidi would take care of things automatically for me .
thanks for your help !

Hi
Under normal circumstances, 2 keyboards that show up OK in Audio MIDI Setup should work fine.
In Audio MIDI Setup (MIDI Window), click the "Test Setup" button and play some notes on each keyboard. You should see a blue flash on the Interface Icons in AMS, and you should hear a beep through the System Audio when you release the keys. (Turn this off when done).
In Logic, check the MIDI transmission channels of each keyboard (some instrument plugs are channel-sensitive).
CCT

Fan controller question

This is probably a quick and stupid question, I am running some vantec 80mm tornadoes which are a bit loud. Well actually if you can imagine a boeing 737's engines powering up you know how load these fans are. Seriously though they are about 71 Dcb. So I would like to control their rpm depending on my needs. My question is, can the K7N2-ILSR only support two fans directly off the motherboard (the nb fan and cpu). And I have to buy a fan controller right? Or is there another way I am not aware of.
Im sure some people will tell me I shouldnt have bought these fans, but they really do push a lot of air,
Thanks everyone

I have a CoolerMaster Aerogate II control box.
It looks neat, it monitors temperatures of 4 devices and you can run your fans to it and control the speeds with a dial, as longs as the fan supports speed control.
The temps are accurate, while I'm in the bios screen I saw that the Aerogate was reporting the exact same CPU temperature as the bios was, but Aerogate was refreshing faster. (it's a real time). I have the Aerogate's diode run underneath the heatsink, right next to the CPU die.
The Aerogate has a LED screen that's blue, and the devices are selected through "channel switches."
The Aerogate cost 45 dollars (USD).
It's my new favorite toy.

Approver Determinator CUP (Controller) Question

Hello, I had a few questions when trying to use the (Controller) as Approver Determinator for our SPM work flow.
Everything is working perfectly fine using a CAD as the approver. But when I switch it over to the (Controller) I'm having some issues.
Questions:
1) Where would you configure the Controller's email address for approval notification? Guessing the SU01 record? This is different from other approvers who are configured within the UME
2) Won't the (Controller) need a CUP UME role to enter through the approval link sent out via email? Currently we only have controller in the backend ECC systems and view access to SPM reports through a UME view FF role.
3) Do we need to run a background job to send emails for the controller in the ABAP system or just the standard one in CUP?
Thanks!

There are "controllers" in SPM that you add to an FF_ID which then monitors logs. There is also a "controller" within the approver determinator drop down in a stage. I was wondering if these are the same. So if you use "controller" as your approver determinator for a certain FF ID in CUP will send for approval to the person define against the ID in the FF table.

Backup Metadata Controller Questions...

I have two questions regarding the Backup Metadat Controller for Apple's XSAN.
Question 1: Do I need to purchase an XSAN client ($999) for the Backup Metadata Controller AND the primary? I was hoping the backup used the same client as the primary.
Question 2: I'm having trouble finding the hardware requirements for the MDC. I was hoping to use a single cpu G5 Xserver as the primary and a dual G4 Xserver as the backup. We plan to only have a handful of clients and will only be working with DV-25 and Mpeg-2 files, no HD stuff here. Will these Xserves do the trick?
Any ideas would be great!
Thanks!

The licensing confused me at first too. Until you realize that every computer that is direct-attached to fiber and mounts the Xsan volume directly is a client and needs the software, and therefore needs a separate license. That's the way it works. Computers which connect via a re-share (AFP/NFS/SMB) do not need an extra license.
Doing a google for the Xsan mdc requirements brought up this page:
http://docs.info.apple.com/article.html?artnum=302143
System Hardware Requirements
Xserve or Xserve G5
Power Mac G4 (dual 800MHz or faster)
Power Mac G5 (any model)
Consult the manuals for more detailed info:
http://www.apple.com/server/documentation/

MSI Neo2 865PE and SCSI Controller Question

Hi All,
Im new here so be easy on me
Anyways im currently building a new system P4 System based on the new 800FSB, i have all the parts ready, ie. CPU, DDR400 RAM, Case, Adaptec SCSI Controller, HDD etc etc, but believe it or not i havent purchased a motherboard yet. The reason being i want to get clarification that my setup will actually work with the motherboard before i go out and buy it. WHAT SETUP you ask, please read on
Now the reason im posting here is because from what i can see on the internet this is a really top notch board (best performer in the recent THG test) so naturally its one of the boards im considering.
Now to the my QUESTION: I want to use my SCSI drive connected to the Adaptec as the OS drive and boot from it. However my main concern is that the Neo2 865PE wont let me boot of the SCSI Hard Disk attached to the Adaptec SCSI 21960 controller. Ive been told that certain motherboards eg. ASUS wont detect a SCSI controller on boot up because it will only detect the onboard RAID controller as the SCSI controller, therefore not letting you use the SCSI disk at the boot device.
Can anyone ease my mind and tell me the MSI 865 Neo2 will let me do what i intend??? ie. Boot of SCSI disk.
Any response/comments is appreciated
Cheers

Hi Domino,
Thanyou for testing the setup out for me.....
When you tested it did you have your onboard Intel S-ATA RAID controller enabled? because i believe this is where the problem will eventuate, when you enable the m/b's ONBOARD RAID controllers.
Cheers

Post-Authentication ACL in Wireless Controller question

Hey guys,
I'm trying to setup an ACL for "after" people login to our wireless network to allow them access ONLY to web, not file servers or sql servers, etc.
I found how to configure an ACL, but it's pre-authentication and after people log in, they have access to everything.
Any ideas?
I'm using a Wireless Controller 2504
Thanks.

I think I found it, there is a override ACL after login, I set this one up (see picture), but even though I can do a nslookup and I can ping any site, when I try to go online, I get nothing.
What am I forgetting?

Controller questions

We have a 4402 controller and a WiSM module in our core 6513 switch.
Out of the box our 1131 APs always join the second controller on the WiSM. Is there a means to control which controller it the AP joins out of the box? I do not have any of the controllers set as master. I manually adjust the primary and secondary after the AP is up and running. Was wondering what the tertiary field is for.
All our controllers run the same WLANs. Should I be looking at using mobility groups? I need to read up on that a bit. Do controllers in a group share WLAN information such as a change or addition of a WLAN get pushed to other controllers in the group.
Craig

I have installed 462 of the 1131 Ap's in our environment, and here is the best way I have found.
With the number of Ap's I am using Layer3 with a DHCP server with a scope for each subnet with option 43 giving the AP's all of the controllers addresses(they need to know all for failover purposes). I actually set one controller as Master (just for the config then I turn off the Master). That way I can monitor a single controller and as AP's come up, I can configure the preferred controllers...Tertiary is just for additional redundancy as a Third prefered Controller.
Mobility Groups: This is really used for active information sharing, not configuration sharing. There is a way to mass configure all controllers through WCS using Templates and applying them to all applicable controllers. I hope this info helps...

Output controller question

Hi,
In the output controller (sp01), when i select a spool request and click on the print icon, i see a message "output request created". Instead i want to see a pop up window that shows parameters like 'Print immediately' etc. Please suggest.
Thanks.

Hi there,
Check in the O/p type --> Default values --> If send immediately when saving the applicaton is selected or not. If not select that option.
Also check in condition records Time shoould be option 4 send immediately while saving the application.
Then try SP01. It should work.
Regards,
Sivanand

4402 LAN Controller - Questions

Hi
We have 4402 LAN Controller an our existing 5 stanalone AP will be configure with LC.
Is it possible to have Multiple SSID as,
DATA-ssid
VOICE-ssid
GUEST-ssid
&& with strong security with different keys for each ssid
Authentication for DATA-ssid through 802.1Q
We also plan to have IP-PHONE soon and would be integrated with VOICE-ssid ; sadly it woul be Nortel IP Phone.
I hope no integration issues.
Thanks
ST

You bet, we're currently running 8 BSSIDs on our APs at different sites, in fact you'll probably want to tie each SSID to their own VLAN as well. If you're planning on using VoWL (Voice over Wireless LAN) you may want to see if those phones support WMM (essentialy Wireless QOS). More info on WMM can be found here: https://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/vowlan/41dg/vowlan_ch2.pdf.
Also, you can authenticate data via dot1x as well. What's cool is that if you're running ACS 5 then you can set WMM levels and VLANs based on criteria and have one SSID for a variety of purposes. What version of code are you running on the 4400?
Hope this helps

975x Plat SATA controller question

Hello all,
I am looking to build a new system now that Core 2 is out. My Amd64 3200+ (now 3700+) lasted a record amount time. What I plan on doing is buying a couple of SATAII drives, run them RAID 0 on one controller, then on another SATA controller, run an older single SATA drive which will be my boot drive. I don't like RAID 0 for sensitive data I want to keep. Can this board support this configuration? Looks like it will from what I can tell.
If you are curious, this is what I am going with so far:
CPU: Intel E6400
Motherboard: MSI 975x
Video: MSI 7950
Memory: Corsair XMS2 2GB (2x1GB) TWIN2X2048-6400C4
Case: Not real sure yet (This is the leader so far, not sure I want all the LEDs) APEVIA (ASPIRE) X-Navigator
http://www.newegg.com/Product/Product.asp?item=N82E16811144091
PSU: If I get the mentioned case, it comes with a 500w PSU which I will use.
CPU Cooler: ARCTIC COOLING Freezer 7 Pro (Going to give this one a shot)

You can actually use the 4 SATA ports, just only 2 ports set to RAID-0, the other 2 you may set it as single SATA drive. That can work as well, but you need to have the Intel Matrix Storage Driver installed.

Expanding and controller questions

My company finally filled (physically, with drives) our XRAID. There are now 14 750gb drives in it.
At this current point it sits like this:
XXXXXXX YYY ZZZZ
X = blank drives on upper controller
Y = raid 5 with spare on lower controller
Z = raid 5 with spare on lower controller
My ideal situation would be:
YYY YYY Spare = RAID 5+1 and spare on upper
ZZZ ZZZ Spare = RAID 5+1 and spare on lower
I know how to expand arrays using RAID Admin, but I'm not sure how to MOVE and array from one controller to the next. I would need to move one array to the upper controller and then expand it, and then expand the array on the lower.
Is it: create the array on the controller then copy the data over?
Or: create the array and physically swap the drives?
Or maybe its neither and I have this all wrong. Any advice would be appreciated, thanks.
Thanks for the help
Matt

Thanks everyone for your help.
So I guess the plan is to build an array on on the upper, copy the data to it, then break and rebuild the other. Not as easy as I hoped but doable.

Controller question

Similar Messages

Maybe you are looking for