Controller setup-losing communication

I'm using a Yamaha DM1000 as my mixer and control surface. I'm using it's USB output. It constantly loses communication with Logic and I get the annoying "please power cycle" error message. I've tried disabling the active sensing in the controller setup page, but that doesn't seem to fix the problem.
Anyone else have similar trouble using a controller?
I also have a Frontier Transport that uses USB, and I don't get this problem. Any help would be greatly appreciated.
thanks

Well ^($#(@!!!
I thought swapping the usb port took care of this but I'm still get the "lost communication" error!!
There are some active sensing options in the controller setup pages. Anyone know how to disable the constant checking.
This is really frustrating Sometimes it seems to lose communication when I switch apps, but sometimes it just does it on it's own.
When it's working, it works great so I don't think it's a setup issue as much as a Logic or systemwide usb active sensing issue.

Similar Messages

App Controller Setup crashes

While running the setup.exe as admin for the mu_system_center_2012_app_controller_with_sp1_x64_dvd_1345042.iso the App Controller Setup crashes with "System Center Setup has stopped working" "A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution is available.". This happens during the Prerequisites step.
I have restarted the laptop several times and the OS is up to date. Is there a log that I can check for more detailed errors? What should my next step to troubleshoot?
Environment
SQL Server 2008 r2 and SQL Server 2012
Office 2013
Window 8 Pro 64 bit
Intel i7-3720QM @ 2.6
32 GB Ram
72 GB free on primary drive

If there is a problem with Setup completing
successfully, consult the log files that are located in the
%LOCALAPPDATA%\AppController\Logs folder
If setup complted with some error. please check it under: C:\ProgramData\AppControllerLogs
Aditionally, what is your OS family. Is it a Windows Server 2012 or Win8 Client? AppController can only be installed on the Server build such as:
Windows Server 2008 R2 (full installation) or Windows Server 2012.
For installing steps or system repquirement detail please refer to:
http://technet.microsoft.com/en-us/library/gg696046.aspx

Setup PO Communication Profile Options

Hi All,
How to setup the "To Domain" and "To Identity" of a supplier like Staples ?
I can see only two profile options available in eBuisiness suite R12 for cXML Communication.
1) PO: cXML From Domain
2) PO: cXML From Identity
My requirement is to setup the following in my outbound cXML being sent to Supplier.
<To>
      <Credential domain="to_domain_default">
        <Identity>to_identity_default</Identity>
      </Credential>
    </To>
@P

Hi All,
Can anybody help by looking at the following cXML file generated while sending to the supplier using outbound message
<?xml version="1.0" encoding="ISO-8859-1" standalone='no'?> <!DOCTYPE cXML SYSTEM "cXML.dtd">
 <cXML version="1.2.007" payloadID="2014-01-21-14-01-58.4167103:0:0.228626802317689347705083245541373929554@" timestamp="2014-01-21T02:01:58+00:00" xml:lang="en">
<Header>
     <From>
          <Credential domain="DUNS">
               <Identity>12345678</Identity> /* Some number generated is replaced with 12345678 for example */
          </Credential>
     </From>
     <To>
          <Credential domain="to_domain_default">
               <Identity>to_identity_default</Identity>
          </Credential>
     </To>
<Sender>
     <Credential domain="DUNS">
          <Identity>258963148</Identity>
               <SharedSecret>XXXXXXXXXXXXXXXXX</SharedSecret> /* Replaced Text generated with XXXXXXX as it is shared secret */
     </Credential>
<UserAgent>Oracle E-Business Suite Oracle Purchasing 11.5.9</UserAgent>
</Sender>
</Header>
<Request deploymentMode="production">
     <OrderRequest> OrderRequestHeader orderID="4167103:0:0" orderDate="2014-01-21T01:57:45+00:00" orderType="regular" type="new">
I need to configure the following part in Oracle E-Business Suite
<To>
          <Credential domain="to_domain_default">
               <Identity>to_identity_default</Identity>
          </Credential>
</To>
As From Group is configured from 2 Profile Options mentioned on above threads
1) PO: cXML From Domain
2) PO: cXML From Identity
<From>
          <Credential domain="DUNS">
               <Identity>12345678</Identity> /* Some number generated is replaced with 12345678 for example */
          </Credential>
</From>
How to do for the "To" Group Configuration in Oracle XML Gateway in Oracle ebusiness suite ?
Thanks in advance and help is greatly appreciated.
@P

Help Logic Pro X deleting controller setup

how do i delete in Logic Pro X a mixer setup?
i chose by mistake a wrong controller out now i cant delete it and when i want to put the right one in it says the controller is already in the list.
Right Click > Delete... Doesnt Work
Please Help

LPX resides after instal in the Application folder and should also be available in the Dock. If this is not the case then something has gone wrong during the download, you'll have to try again or contact Apple if the problem persists!
Have a nice day!

ISE on Integrated Management controller - setup

Hi all,
I just got my 2 x 3415 controllers. It's running the Integrated Management controller - when connecting via the KVM console i get a login screen
ise-server-1 login:
Now form what I saw it does not have a default password - that's done while in setup mode. I took the servers out of the box directly from Cisco.
Does anyone know the password recovery / or have any suggestions on how to get past that - or force it to run the setup for ise on the
Integrated Management controller?

Document did help, however - something else. When they explain how to do a iso -> usb. Mine kept on failing.
First tried the Linux version - then windown.
Finnaly I just coppied the file to a usb and did a vmount via my laptop - and installed ise that way.
Now time for the configuration. -

Controller setup

I currently have two systems which I am setting up:
1) Single Chassis VXI system with VXIpc-870 controller
2) Dual Chassis VXI System with VXIpc-870 controller and
VXI_MXI-2 extender boards
In the dual system i need to DISABLE the VXI Bus Timeout and let the MXI
extender control the VXI Bus timeout. On the single chassis system, I
assume I still need to set this timeout to a value on the controller
(otherwise i could be waiting indefinitely if the system tries to access
an invalid address).
For our costumer, I am creating a bootable OS CD to load the system. I
would like to have the controllers initialized properly. I could not
find any config file for this option, it looks like it is all in
hardware. Is there a way at system
bootup(?) to initialze the
controller with a preset state? Or write a simple VISA program to set
this myself?
There are a few other things that need to be setup with the controller,
but these are common between the systems and it looks like there are
fields within the DevInfo to change these.
any info would be greatly appreciated.
* Michael Carter ([email protected]) | Southwest Research Institute *
* Principal Analyst | 6220 Culebra Road *
* TEL/FAX: (210) 522-3933 / 522-2709 | San Antonio, Texas 78238-5166 *

I do not need to setup the MXI-2 extender boards. They will be
pre-configured before installation. They will be hardwired with any needed
mods for our system.
The controller on the other hand, will need some adjusting depending on
which chassis environment the controller is placed. On the dual system, the
870 bus timeout will be disabled. For the single chassis, the 870 bus
timeout can remain the default.
We are creating an image CD of the OS for installation purposes. This will
have the OS environment suited for our customer, with all necessary drivers
and software loaded. We are hoping to have one installation disc for the
OS.
What I am looking for is a way to configure the 870 AT INSTALLATION TIME
with the proper bus timeout for the chassis system. This needs to be an
AUTOMATED process. With the hardware config info saved to a file, is there
a "batch mode" to write it back out to the controller without going back
through the user interface of the T&M Explorer?
Can the bus timeout be changed from a user program? This would allow a
post-install program to run and change the system as needed.
thanks for the help,
Michael Carter
Southwest Research Institute
[email protected]
"Trey Hamilton" wrote in message
news:506500000005000000F7350000-993342863000@exchange.ni.com...
> Michael,
>
> When you load NI-VXI on the system, the 870 will have a default
> timeout assigned to it, so you shouldn't run into a problem of waiting
> indefinitely.
>
> The MXI-2 cannot be accessed until resman is run, so there really is
> no way to set the timeouts permanently with a config file. What you
> can do, however, is save all of your hardware configurations to a file
> (this is an option inside of the Hardware Configuration of each
> module) and load each one after resman has been run.
>
> I hope that one of these options is a viable one for you. Please let
> us know if there is anything else that we can do for you.
>
> Trey Hamilton
> Applications Engineer
> National Instruments
> http://www.ni.com/support

Controller setup Roland A800Pro

Hi
I'm using Logic Pro 9.1.8 on a late iMac 2009 21inch
I recently brought a Roland A 800 Pro midi controller and have installed the driver and the control surface setup software. The keyboard plays notes on a softsynth, so midi is getting through into logic. However the transport buttons on the A800 Pro does not work. I have been able to assign Key Commands and get the transport to operate, but when I turn off the A800Pro at the end of a session and turn it back on the next day. I get the same problem all over again. That is, the transport does not work, but the keyboard can play notes on a softsynth in Logic.
Would really appreciate any feedback.
Thanks guys.

Have you gone into the Control Surface setup and configured it?
Go here:
http://documentation.apple.com/en/logicpro/
Read the manual for "Control Surfaces Support".

Change Account name on my domain controller without losing my data

Hello every one
I need to ask an important Question for me
On my domain controller i create a new user on my active directory " EX : Hashem Hamdy and account is : Hashem " after that i make some modification on my network and i need to rename this user and change log in account from " Hashem
to Hashem_Hamdy " without losing data on my desktop , email configuration
can any one help me please

Hi,
You can rename the AD account the SID will till rename the same, so the logon profile will be kept. The logon profile folder on the local machine will still remain with the old username and everything within the profile will be there.
Below is a link with some of the implications here. Pay attention on the profile path and home folder in case you have these populated at user properties, you'll have top update as well.
http://blog.foreignkid.net/2010/07/rename-ad-account-what-about-the-windows-profile/
Regards,
Calin

Domain Controller Setup

I work for a small utility company, and our General Manager has requested that I setup a domain environment. I have two servers, both will be running Windows Server 2012 R2 Standard. We will not be running Exchange. I have never done this
before, so I just wanted to ask the pros out there a few questions.
My first question is, how should I RAID the two servers? What partitions need to be created for a smooth running environment? Also, should my second server be the file/printer sharing server? I'm am searching the web looking for information
too, so any help would be greatly appreciated. Thank you!

hi wbppd,
please find this technet article I think it will help you in installing domain :
http://social.technet.microsoft.com/wiki/contents/articles/22622.building-your-first-domain-controller-on-2012-r2.aspx
also this video will help you:
https://www.youtube.com/watch?v=50VhoeG_6rY#aid=P-dMJtBrsxE
regarding the RAID configuration most of Administrators preferred to use RAID1 in DCs but no problem in using any other RAID configuration.
regarding your 2nd server, it is recommended to have at least two domain controllers in your domain, so if it will be DC it is not recommended to be used in file/printer server, but it is doable
Hamed Abdelraof, System Supervisor RayaContactCenter, Egypt

Networked Unitor8mk2 & AMT8 losing communication a lot...

Hey Guys,
I have a Unitor8mk2 and an AMT8 networked together as one 16-port interface and they've always been rock solid - until recently. The computer seems to lose communication with the AMT8 (the slave of the two - the Unitor is the one that's directly connected to the Mac). I have to turn them both off and back on for the computer to see them both, and that's getting old.
It almost seems like a random software thing or a conflict somewhere - the hardware hasn't changed at all, and has been installed in my console for years.
Any thoughts? I've removed any other MIDI drivers to eliminate any potential conflicts.
Thanks so much...
Jim

More specifics:
My setup is
Mac Pro via USB to first unit (Unitor 8 MkII)
Unitor 8 Mk II via RS422 to 2nd unit (AMT8 #1)
AMT8 #1 via RS232 to AMT8 #2
AMT8 #2 via RS422 to AMT8 #3
Using Unitor 8 control (version 3.1), and both before and after having replaced EmagicUSBMIDIDriver.plugin with a fresh install taken via Pacifist from the Logic Studio DVD's (hassle-y little project in itself), it finds the unitor and the first AMT8. No matter hwat else is done, since two evenings ago, AMT8 #2 and AMT8 #3 are not found. Howver, hitting the panic button in Unitor 8 Control lights up the expected buttons on all four units. Also, hitting the Panic/Patch button on the Unitor as well as the first AMT8 (#1) lights up the expected LED's on all four units, while hitting the same buttons on AMT8 #2 and #3 lights up only its adjacent neighbor, but not the Unitor and the first AMT8.
Thus there is a possible electronic explanation: whatever carries signal from the latter units in the chain and past the #3/#2 "barrier" is faulty. Doesn't sound impossible, though it does sound unlikely. In other words, signal will flow from the mac and outward, and also outwardly from the two units closest to the mac, but not in the opposite direction. Obviously it still can be software, which doesn't make for pleasant pictures. And regardless of how pecuniary or anti-MIDI Apple seems to be, their having designed a killer patch, set to go off on a certain date, just to eliminate the last vestiges of the Emagic hardware legacy seems unlikely, since it would probably be discoverable.
On the cables not being able to be faulty, or more correctly the connectors, oxidation is a fact regardless of mechanical issues, so it isn't entirely impossible. I have some DeOxit and ProGold around, and might do some dabbing if less extreme approaches yield nothing more...

Basic questions on migrating from a controller-less setup to a 2504 controller setup

Hello,
I am new to Cisco networking so forgive me for my basic questions. Currently our company uses a controller-less setup with 2 WAP321's and 1 Cisco controller-less 2602e WAP. I am told I can reflash the Aironet 2602e to be used with the controller. My first question is, if I mount the controller and network it into my network to set it up, will it effect my current environment? I don't want a situation where I take down the current environment. If it will not harm my current wifi network then, should I be able to configure the controller fully and associate my new WAP Cisco Aironet 2602e to it without effecting the current environment? Thank you!

There will be no problem.
connect AP to switch and place it same place where it was to cover the same area.
Make sure that 2602 AP need minimum 7.2.100.0 version on WLC.
See the compatibilty matrix.
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
Regards
Dont forget to rate helpful posts

Logic / OS X randomly losing communication with firewire devices

Hi
Connected to my MBP I have a Lacie FW drive with an Apogee Duet daisy chained to this.
During a Logic session yesterday all of a sudden I received device removal (warning) messages for these two items although they were still connected to the relevant ports!? I also had to force quit Logic following this.
When I reconnnected the devices were recognised but things were still not right as when I tried to change the volume on the duet the system was very slow in responding.
I was running of the battery power but this has never happened before whether connected to the mains or the battery.
Any ideas/should I worry?
Everything seemed fine a couple of hours later when I restarted the system but I am uneasy about the potential for this to occur during a more important session.
Any advice greatly appreciated
Cheers
Sam

Hi Sam
I have an Imac, same operating system as you (10.5.8) and also the Duet. Also got a Lacie external hard drive. i have also encountered this problem in the last week. however, I have had this problem in both Logic 9.02 and Record so it seems it isn't just a Logic problem.
One question - was Airport on when you lost communication with your hard drive? My was and when I turned it off the problem has not occurred again. It may have something to do with it although I'm not technically minded so I wouldn't know why.

3502i keeps losing communication with WLC 5508

Hello all,
This problem only seems to affect one of our sites. Every once in a while, several APs would lose link to the 5508 and get stranded. The only way to fix the issue is either to power cycle, or better yet SSH into the APs and use the command "capwap ap controller ip address x.x.x.x", and then they'd automatically rejoin the controller. At first, I thought network hiccups caused the APs to lose connectivity, but there's none that I could find. I have the primary/secondary controller IPs configured in them as well. See log below:
[previous log entries show AP working as intended, then...]
*Jan 18 05:29:29.632: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(CAPWAP_ECHO_REQUEST
., 1)
*Jan 18 05:29:29.632: %LWAPP-3-CLIENTEVENTLOG: Switching to Standalone mode
*Jan 18 05:29:29.645: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE
*Jan 18 05:29:29.645: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to [ommitted due to security reason]:5246
*Jan 18 05:29:29.704: %WIDS-6-DISABLED: IDS Signature is removed and disabled.
*Jan 18 05:29:32.797: %CLEANAIR-6-STATE: Slot 0 down
*Jan 18 05:29:32.797: %CLEANAIR-6-STATE: Slot 1 down
*Jan 18 05:32:35.214: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
*Jan 18 05:32:38.278: %LWAPP-3-LWAPP_INTERFACE_GOT_IP_ADDRESS: Interface BVI1 obtained IP from DHCP...
*Jan 18 05:32:38.278: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.
*Jan 18 05:32:38.379: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.100.1.20, mask 255.255.255.0, hostname AP020
*Jan 18 05:32:38.379: %LWAPP-3-LWAPP_INTERFACE_GOT_IP_ADDRESS: Interface BVI1 obtained IP from DHCP...
*Jan 18 05:32:46.215: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Jan 18 05:35:41.753: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
*Jan 18 05:35:44.817: %LWAPP-3-LWAPP_INTERFACE_GOT_IP_ADDRESS: Interface BVI1 obtained IP from DHCP...
*Jan 18 05:35:44.817: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.
*Jan 18 05:35:44.898: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.100.1.20, mask 255.255.255.0, hostname AP020
*Jan 18 05:35:44.898: %LWAPP-3-LWAPP_INTERFACE_GOT_IP_ADDRESS: Interface BVI1 obtained IP from DHCP...
*Jan 18 05:35:52.753: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Jan 18 05:38:48.260: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
*Jan 18 05:38:51.324: %LWAPP-3-LWAPP_INTERFACE_GOT_IP_ADDRESS: Interface BVI1 obtained IP from DHCP...
*Jan 18 05:38:51.324: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.
*Jan 18 05:38:51.405: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.100.1.20, mask 255.255.255.0, hostname AP020
[These log messages keep looping endlessly]
These APs discover the controller by using DHCP + DNS. Any suggestion will be greatly appreciated!
Thanks,
Wil

I have only had this issue a few times but what I end up doing is factory default the AP. I also end up uploading the rcv image and deleting the other images in flash. I do some beta testing so it could be that the images get corrupt, but that has been my fix. The AP joins and then downloads the firmware from the WLC again. It might not be what you want to do, but maybe if its an issue with a particular AP you can test it out.
Sent from Cisco Technical Support iPhone App

Losing communication with DAQ devices - help greatly appreciated

All,
I have been working on a VI whose function is the following:
- Acquire data from three sources
     - A block of eight displacement sensors connected via RS232 (using a USB adapter)
   - An NI-USB 6210 card measuring voltages across eight batteries
   - Another NI-USB 6210 card measuring voltage across four load cells (these correspond to batteries one through four).
   - Data acquired at 1 Hz, written at 0.2 Hz (no buffer - simply writes one fifth of data recorded)
- Open/close a relay board based on certain inputs
- Provide basic UI functionality to control data manipulation, display data, and write data to text files
- Write data to text files
We have run four tests with this VI. Each test runs for anywhere from 24 to 48 hours. During three of these four tests, we have lost connection with one or both of our NI DAQ cards. I have attached one of the output files - notice that in the 'Current (mA)/Voltage (V)' and 'Load (N)' columns, at a certain point on of the cards starts reading 'NaN', followed soon after by the other card. Note that this has happened on two different computers, one laptop and one desktop, both of which had hibernate/sleep disabled.
For your reference, I have attached the VI. This VI will not run as there are some subVIs that I have not included; these subVIs do not do anything critical to the execution of the program. The program generally runs as follows:
- Initially, a subVI runs that aids the user in selecting the appropriate COM port and USB devices.
- The VISA device and DAQ cards are initialized, all relays are opened, variables are initialized
- In parallel, there are two producer timed loops, one consumer for loop and an event loop
   - One producer loop continuously acquires voltage data from both DAQ cards. When the loop is over, basic DC voltage values are taken from all samples in each buffer, and the values are enqueued
     - One producer loop acquires one reading per loop from the displacement sensor (via a VISA Write -> VISA read), and the response string is enqueued.
   - The consumer loop runs at a similar timing as the producer loops (blocked using queues). It manipulates, displays, and records acquired data. It also opens relay channels if the corresponding displacement values are greater than a set threshold.
     - The event loop opens text files for writing when a button is depressed, as well as performing basic tasks such as clearing graphs, etc.
What is the cause of this issue? What am I doing wrong? This error is preventing us from running tests at our company. Any help is greatly appreciated.
Thank you,
Bryan
Attachments:
DAQ issue VI.vi ‏124 KB
sample output.txt ‏1230 KB

Wayne,
Thanks for your reply. Unfortunately, my knowledge is limited in this area. We are using an ADU208 USB relay from Ontrak (information here: http://www.ontrak.net/ADU208.htm). We are using the bundled subVIs to open/close each channel of the relay depending on the acquired data. How could this relay board affect the DAQ communication?
It may also be important to note - I have tried to make this VI so that all devices need not be used all of the time. That is, sometimes we choose to not use the relay, sometimes we choose to not measure load, and sometimes we choose not to measure current. This means that we do not always have the same hardware connected, but the software runs the same and deals with the resulting errors appropriately (hopefully). The previously attached output file is from a test where the relay was not connected, however the relay commands were still run (and presumably threw errors).
Thanks again for your help
Bryan

Losing communication with burner -- error code 0x80020022

i'm in the process of trying to backup some work -- i've been burning disks for about an hour and i'm now getting an error message that says (paraphrasing) that the disk couldn't be burned -- lost communication -- error code 0x80020022 -- this has happened during three straight attempts wasting three disks and after i restarted the computer as well --
tried to search for this error code through apple and am getting nothing back --
any ideas or help would be greatly appreciated!!
thanks

I am experiencing the same problem aswell, every time I try to burn different Verbatim DVD-R or Maxell DVD+R at different speeds 2x 4x or 8x I get the same error code 0x80020022
I tried resetting the PRAM and NVRAM and some other suggestions mentioned in this forum, but none of the worked.
I just bought my new intel iMac, two weeks ago, and never tried burning a dvd before today. My drive specification: MATSHITA DVD-R UJ-846
Updated my system to 10.4.7 on the first day I got it.
I am trying to figure if I should try something else or just return it for repairs...

Controller setup-losing communication

Similar Messages

Maybe you are looking for