Controller software compatibility with cisco prime 2.0

Are any of the following wireless software (5500 controller) releases compatibile with cisco prime 2.0 ?
- 7.4.121.0
- 7.6.100.0
M.

HI,
Cisco PI 2.0 supports:
Cisco 5500 Series
7.0 through 7.4.110.0
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/release/notes/cpi_rn.html
Your both software not supported by PI 2.0.
May be PI 2.1 will support both these software in future.
Regards

Similar Messages

Cisco Prime Infrastructure 1.2 with Cisco Prime Network Control System Hardware Appliance

Hi Team,
I have following BOM
Cisco Prime Infrastructure
R-PI-1.2-K9
Cisco Prime Infrastructure 1.2
1
R-PI-1.1-500-K9
Prime Infrastructure 1.2 Software - 500 Device Base Lic
1
L-PILMS42-500
Prime Infrastructure LMS 4.2 - 500 Device Base Lic
1
L-PINCS12-500
Prime Infrastructure NCS 1.2 - 500 Device Base Lic
1
PRIME-NCS-APL-K9
Cisco Prime Network Control System Hardware Appliance
1
PI-APL-IMAGE-1.2
Cisco Prime Infrastructure 1.2 Appliance Software
1
Pls let me know if we have both NCS and LMS preinstalled with Cisco Prime Infrastructure 1.2 Appliance Software orwe need seperate appliance or server for LMS 4.2.
Regards

Hi Scott,
Thanks for the response but I got to know that LMS and NCS are combined in single ISO image from PI 1.2 and can be installed on the same physical NCS appliance.
Can you pls check this.
Regards

Cisco Prime LMS appliance Compatibilty with Cisco Prime NCS

Hi,
Is it possible if we can install Cisco Prime LMS 4.2 in the appliance which is inbuilt with Cisco Prime NCS .
We have PILMS42-1.5K-U license available with us.
Rgds,
Kamal

One can install either LMS 4.2 or NCS on the a physical (software on PRIME-NCS-APL-K9 hardware) or virtual appliance (software installed on customer-provided VM).
The two products (NCS and LMS) cannot coexist on a given appliance instance. This is due to change in the future as LMS and NCS merge under the Cisco Prime Infrastructure 2.0 release but for now they are distinct and separate products with a common approach and similar look and feel but requiring separate servers, whether physical or virtual.
Please refer to the ordering and licensing guide here.

Autonomous to LWAPP with Cisco Prime 2.2

Hello, I need to know if exist any procedure to convert Autonomous to LWAPP access point with Cisco Prime 2.2.

Here are the Steps Cristian.
To create an autonomous AP migration template, follow these steps:
Step 1 Choose Design > Configuration > Wireless Configuration > Autonomous AP Migration Templates .
Step 2 From the Select a command drop-down list, choose Add Template, then click Go . If you are updating an already existing template, click the applicable template in the Template Name column.
Step 3 Complete the required fields. For information about the field descriptions, see: http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-0/reference/guide/prime_infr_ref.html
Step 4 To view the migration analysis summary, choose Operate > Wireless > Migration Analysis .
Note: After an access point has been converted to lightweight, the previous status or configuration of the access point is not retained.
Hope this will resolve your issue ;)

Replicate in the Master controller and creation of new user with cisco prime infrastructure 2.1.

Hello!!
We have multiple controllers Cisco WLC 5508 (all running software version 7.6.120.0) distributed in various buildings and a controller in other control building (also Cisco WLC 7.6.120.0 5508) operating as Master and backup of the buildings's controllers .
Each building is radiated such an SSID that is used as a validation of the user connected to that SSID web portal each controller (in the WLAN, Security -> Layer 3 -> Web Policy), using the local database to validate the user.
The problem is that the local database of users is not being replicated between controllers buildings and the Master controller, so if you drop the controller of a building, the Master controller begins to provide service to the buildings access points, but the equivalent radiated SSID cannot able to validate users.
I need know if it's possible through Cisco Prime Infrastruture 2.1, first replicate in the Master controller on the basis of existing controllers buildings each local data and, second, that the creation of new users are automatically perform both the controllers like to the Master .
Thanks.

As noted earlier, it is not advisable to use the root user to log in for normal use. New users and groups can be created by navigating to Administration > Users, Roles & AAA as shown in the preceding figures. It would help to chalk out what are the various levels at which you want to distribute the users, and to create those roles first. It doesn’t really matter whether you create users or groups first. New users can be easily added by going to Administration > Users, Roles & AAA > Users > Add Users > Select “Add Users” from the drop-down on the right side. Once you get into the add user workflow, fill in the username, password, and local authorization for this user as shown in the figure below.
A virtual domain can also be assigned to the users when you define their roles by selecting the virtual domain on the left side and moving it to the right side as shown in the image below (left).

Traffic Analyzer is rare with Cisco Prime NAM

Hi,
we see any rare with Traffic Analyzer, see that ip source configured X.X.X.X/24 is as destination X.X.X.X. Where see that source is Y.Y.Y.Y. If we configure as destination X.X.X.X wihout source about Cisco Prime NAM, will have that appear in traffic analyzer as ip Destination correctly, but is backwards.
have a card NAM-2 with last patch (WS-SVC-NAM-2), Version 5.1(2)). We configure about Cisco Prime Network Analisis Module Web where
choose Capture > Packet/Capture Decode > Sessions
Configure Capture Session paramaters correctly, below:
with a Name "Prueba"
Capture Sourceis Data Ports with DATA PORT 1 and DATA PORT 2. (see attach file Configure Capture Session.jpg)
Configure Software Filter Dialog parameters correctly, below:
with a Name "Prueba"
Destination Address / Mask: X.X.X.X/24
select Both Directions
Application or Port: None
(see attach file Software Filter Dialog.jpg)
w
When have all configured about Cisco NAM, we see in Analyzer Packet that ip configure as destination appear as source, and as source other address. We see that is not correctly
(see attach file Nam Traffic Analyzer Packet Decoder.jpg)
It´s normal or is an issue real?
Best Regards.

Alfroj,
I downloaded the NAM 5.1 software to be installed on a SRE Module.
I was wondering if you could help me out with an error.
When i configure the module and then try to install the files from a ftp server, it doesnt work.
It loads all the files and when its installing, theres a crash and the system reboots. It does this all the time. Just keeps rebooting and rebooting.
Im attaching the messages I get
I would appriciate if you could help me out
Thanks in advance
Sincerely,
Dante Verastegui

UPS monitoring support with Cisco Prime Infrastructure 1.2

Dear Members,
Good day,
I am having a project implemented wherein i have the UPS power redudancy solution for our network devices.
Now can anyone gide that is it possible for below :-
UPS units installed with SNMP cards be monitored via Cisco Prime Infrastructure 1.2 as our monitoring & management solution is Cisco Prime Infrastructure 1.2 ?
if yes
Can you guide if following action would be possible to export the below logs from UPS unit to our Cisco Prime Infrastructure 1.2
   a) UPS fault status information
   b) UPS operational status(input power available Y/N)
   c) Battery fault status
   d) Battery charging current
   e) Battery charge level
   f) Output current
Conclusion is we need to confirm that would it be posible to achieve remote monitoring of these UPS units via our CPI 1.2
Thanks in Advance for your support & replies to this query.
Regards,
Muzammil N.

Prime Infrastructure 1.2 can manage non-Cisco devices in a limited fashion via SNMP query and trap processing. It cannot import logs and does not have a generic syslog server,
So if your devices have snmp read only support and can generate SNMP traps for the above you can add them to PI. Follow the manual add device procedure here.

NTP Service on Domain Controller have problem with cisco switch

Hello!
I have Windows Server 2008 R2 SP1 Domain Controller with NTP services
The windows opertion system clients get NTP time ok.
There are problem with cisco switch, can't get time from NTP.
Can anybody help me to fix problem?
C:\Users\Sysuser>w32tm /query /configuration
[Configuration]
EventLogFlags: 2 (Local)
AnnounceFlags: 5 (Local)
TimeJumpAuditOffset: 28800 (Local)
MinPollInterval: 6 (Local)
MaxPollInterval: 10 (Local)
MaxNegPhaseCorrection: 1800 (Local)
MaxPosPhaseCorrection: 1800 (Local)
MaxAllowedPhaseOffset: 300 (Local)
FrequencyCorrectRate: 4 (Local)
PollAdjustFactor: 5 (Local)
LargePhaseOffset: 50000000 (Local)
SpikeWatchPeriod: 900 (Local)
LocalClockDispersion: 10 (Local)
HoldPeriod: 5 (Local)
PhaseCorrectRate: 7 (Local)
UpdateInterval: 100 (Local)
[TimeProviders]
NtpClient (Local)
DllName: C:\Windows\system32\w32time.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
AllowNonstandardModeCombinations: 1 (Local)
ResolvePeerBackoffMinutes: 15 (Policy)
ResolvePeerBackoffMaxTimes: 7 (Policy)
CompatibilityFlags: 2147483648 (Local)
EventLogFlags: 0 (Policy)
LargeSampleSkew: 3 (Local)
SpecialPollInterval: 3600 (Policy)
Type: NTP (Policy)
NtpServer: 10.7.0.4 (Policy)
NtpServer (Local)
DllName: C:\Windows\system32\w32time.dll (Local)
Enabled: 1 (Local)
InputProvider: 0 (Local)
AllowNonstandardModeCombinations: 1 (Local)
VMICTimeProvider (Local)
DllName: C:\Windows\System32\vmictimeprovider.dll (Local)
Enabled: 1 (Local)
InputProvider: 1 (Local)
Cisco config and errors
CISCO1#show ntp ass det
10.7.0.7 configured, insane, invalid, stratum 3
ref ID 10.7.0.4, time D5BC850F.C8400AB2 (15:50:39.782 MSK Mon Aug 19 2013)
our mode client, peer mode server, our poll intvl 1024, peer poll intvl 1024
root delay 62.50 msec, root disp 11128.04, reach 377, sync dist 11218.796
delay 6.06 msec, offset -467951.1096 msec, dispersion 56.49
precision 2**6, version 3
org time D5BC8864.F79C33A7 (16:04:52.967 MSK Mon Aug 19 2013)
rcv time D5BC8A38.EBDECB39 (16:12:40.921 MSK Mon Aug 19 2013)
xmt time D5BC8A38.EA5173BE (16:12:40.915 MSK Mon Aug 19 2013)
filtdelay = 6.06 5.87 3.23 7.90 6.41 5.17 13.03 3.43
filtoffset = -467951 -467905 -467936 -467885 -467764 -467816 -467707 -467697
filterror = 0.02 15.64 31.27 46.89 62.52 78.14 93.75 93.78

Hi,
>>I gave log on as a service right to this account in Default Domain Controllers Policy but unfortunately it was not enough
Based on your description, we can try to grant this account Allow log on locally
user right in the default domain controller policy to see if it helps.
The policy setting is:
Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Allow log on locally
Allow log on locally
http://technet.microsoft.com/en-us/library/cc756809(v=ws.10).aspx#feedback
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

Wireless Cards compatability with Cisco ACU

We have Lucent Orinoco PCMCIA cards in our laptops and have just purchesed some Aironet 350's, they work ok with the Orinoco drivers and client manager software,but i can't get the Cisco client ACU software to recognise the cards as i want to get the Cisco managment software working. Will the Cisco ACU software only work with Cisco cards?

Yes, Cisco ACU is for Cisco cards only.

Topology View / Service with Cisco Prime Infrastructure 2.x "PRIME-NCS-APL-K9" ????

Hi Team,
Hope you all doing well.
I just want know few thing about Cisco Prime Infra 2.x.
1st thing is does CPI2.x support Network topology View? if not then is that any other feature which can provide Network View (exa :- Map,etc)?
2nd thing is it possible to take Telnet/Ssh of discovered device from CPI2.x then how we can do that?
3rd Thing if we want to add third party device in CPI2.x then what are prerequisite for the same (Vendor MIB, etc) and procedure?
Your help will be appreciated.
Thanks,
Vishal

Hi Vishal,
Since you don't have any data as such on PI 2.1 , go ahead installed PI 2.2 on the Appliance.
Yes , you need to download , the .ISO image and burned it on DVD and start the installation.
here is the download link::
https://software.cisco.com/download/release.html?mdfid=286236028&flowid=72882&softwareid=284272932&release=2.2&relind=AVAILABLE&rellifecycle=&reltype=latest
You need to check if you are entitle for download or not.
Can we installed PI 2.2 from current PI 2.1 GUI access? No , it is not possible.
check these links for installation step::
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/quickstart/guide/cpi_qsg.html#pgfId-43441
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/hardware_install/guide/Cisco_PI_Hardware_Appliance_Installation_Guide/cpi_higmain.html#pgfId-1062344
Thanks-
Afroz
***Ratings Encourages Contributors ****

Trouble With Cisco Prime Infrastructure 1.3

Hi,
I have installed the Evaluation Version Cisco Prime Infrastructure 1.3.
There are a few problems that i am facing;
I am trying to push a simple configuration to WLC using Prime Infrastructure. But it is failing as PI doesnot have RW SNMP access.
My question is that can I use PI to push configs without using SNMP. Like do it using ftp or something.
Also do the Wired Devices also need SNMP RW access on PI's part.
2. I tried running discovery for WLC and it worked fine where all the controllers were discovered. But when I try to discover a Switch, the reachability tab says Reachable but in Collection Status tab it shows Unmanaged. When I click on the Unmanaged tab it says " Pre-collection check failed because: ". I have configured the SNMP correctly.
3. I have the CAD files for all the maps in our environment but when I try to upload it to Prime it converts it into GIF, so the maps are uploaded as plain image with no knowledge of walls and obstacles.
So we would have to add the walls and obstacles by ourselves. Is there any way it can automatically pick up on the walls and obstacles and thus provide a better way for predicting RF profiles.
All your help is greatly appreciated.

TAC Case! Sounds like a bug to me...
Sent from Cisco Technical Support iPad App

Issue with cisco prime adding aceess point in the map and move in the final position

I have an Cisco Prime infrastructure with a 2.1.1 version, I created a new campus, a new building, a new floor after that i want to add access point in one floor i can add 4 access ponit but in other one floor I add first 3 access points successful bunt when i try to add a new access point in the same floor tha access point it is added but I can not move it to the final possition on the map.
the cisco prime shows the followging message
Cannot find feature by (Mac/Name/ID) null
how can I move the access point into the last possiton ?

Duplicate post.
Go HERE.

Issues with Cisco Prime LMS 4.2.3

Hi,
I'm trailing Cisco Prime LMS 4.2.3 Soft appliance on ESXi before I deploy it into a live environment and am having some issues.
I've upgraded to version 4.2.3 and the box was working fine after the upgrade however on power it up today the Apache service will not start.
If I look at the LMS application I see this for the Apache service.
"Apache Administrator has shut down this server 0 "
I have tried to starting it.
CiscoLMS42/admin# application start Apache
% Application failed to start
CiscoLMS42/admin#
If I run an application operation debug at the same time I get the following output.
CiscoLMS42/admin# 6 [5343]: application:operation cars_install.c[1145] [admin]: Application initialization initiated for appname: Apache, operation: 0
7 [5343]: application:operation cars_install.c[1146] [admin]: Operations: O-APP_START, 1-APP_STOP, 2-APP_STATUS
6 [5343]: application:operation cars_install.c[1150] [admin]: Verifying app (Apache) is installed ...
3 [5343]: application:operation cars_install.c[1152] [admin]: App (Apache) is not installed.
3 [5343]: application:operation install_cli.c[281] [admin]: Error while starting application - Application: Apache ErrorCode: -999
I'm at a complete lose as to where to look next, failing anything else I'll have to rebuild it, but it would be nice to know how to get the Apache up and running again.
regards
Rich

Hi Richard,
I see the following:
[ Thu Apr 18 20:53:11 GMT 2013 ] TomcatMonitor After gettingAJPPort : ajpPort = 9009 and host =CiscoLMS42
[ Thu Apr 18 20:53:11 GMT 2013 ] TomcatMonitor theMgr constructor successful.
[ Thu Apr 18 20:53:11 GMT 2013 ] TomcatMonitor Inside whileloop
[ Thu Apr 18 20:53:11 GMT 2013 ] TomcatMonitor Tomcat is not ready, it's coming up Connection refused
It looks like the hostname cannot be resolved. Can you try to add a static entry in /etc/hosts for the IP of the server and CiscoLMS42?
Restart the daemon manager and it should work.
Regards,
Vlad
==========
NMS Team
Krakow, Poland
Cisco TAC

NME-NAM with Cisco Prime 5.1.2 and IOS Firewall

Hello,
I have installed and configured the Cisco NME-NAM with Prime 5.1.2 and have access to the NAM via a web browser. It is not picking up any data even though I havew configured the following:
internal data source
network site 10.10.16.0/20
All reports show "No data for selected time interval"
I am running IOS 15.1 on a 2811 with IOS firewall enabled.
Do I need to create a FW rule to allow traffic to be monitored by the NME-NAM?
Thank you,
Matthew

Hi rajeeshp,
Currently I am not allowed to upgrade it because of internal procedures involved in upgrading a specific piece of software (obtaining permissions from various departments). Is it free to upgrade from 1.2 to 1.3 or there is a specific charge for that.
Predrag Petrovic

Device software compatibility with server software

We are currently in a beta mode syncing BlackBerry devices with an Exchange server using BlackBerry Manager 4.1. One of our users wants to upgrage his device software from v4.3 to v4.5. We are trying to determine if that will create any compatibility issues with the server software.
Solved!
Go to Solution.

hello,
I don't think so, but should tjhat happen, you can downgrade back to 4.3.
I think you will find more detailed answers if you post your question on the "Blackberry Enterprise Solution" board.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Controller software compatibility with cisco prime 2.0

Similar Messages

Maybe you are looking for