Controller T3 Line Code Issue

Controller T3 is set to M23 B8ZS, but port xmt'g D4? DACS is ESF THRU...
Is there another setting I am missing? We have other interfaces on the router working fine, I have verified and matched the configs between the two.

I did, and here's the info...
SXFLSDTU91W-R-010K-01#show controllers t3 6/0/0.1
T3 6/0/0.1 is up. Hardware is C10K CHSTM1 line card
Applique type is Channelized T3
Controller is in channelized mode
No alarms detected.
Framing is M23 (Configured)
Line Code is B3ZS, Clock Source is Internal
equipment customer loopback
T1 24 is up
timeslots: 1-24
FDL per AT&T 54016 spec.
No alarms detected.
Framing is ESF, Clock Source is Line
It's up, but XNT'G D4?

Similar Messages

  • Horizontal green lines display issue

         When I have the brightness up more than 4 or 5 notches and a white screen is up, for example Safari, it leaves green horizontal lines exactly where the brightest part of the browser was. They go away after a while, but I'm always afraid I'm messing up my display so I leave it pretty dim.  I have the 27in imac from late 2013. Is it a faulty display or is this common?

    Hi xlpacmanxl,
    So the first thing that I would want to know is with the brightness cranked all the way up, do these lines appear during startup?
    As for troubleshooting:
    Install any and all OS X updates via the App store.
    Perform a NVRAM reset:
    About NVRAM and PRAM
    If it is still going on reset the SMC:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    If the issue still persists, we will need to know if it is occurring outside the OS. Boot to recovery by holding CMD + R during startup. There you can open a safari window by selecting Get Help Online. Crank up the brightness all the way and if you still see the lines there, head into an Apple Retail store for a diagnostic.
    Thanks,
    Ludeth

  • How can i generate AMI line codes in LabView signal express?

    i wish to conduct a project that uses AMI line codes. but i have a hard time using signal express to generate it. can anyone help me with that?

    Hello Barry,
    That is really a problem, in LabVIEW, we can only convert vi to the previous version, I have version 7.1 and so I can only convert to version 7.0 and you cannot open this too.
    But I think that it's very easy to do what I'm trying to explain you.
    Go to the cluster group in the functions pallete. Place an unbundle by name function in the diagram and connect it to the data that's comming out of the FFT Power spectrum vi - the pink (or watever) wire.
    Click in the white part of it (it should contain something like f0), choose magnitude.
    This is now an array that you can connect to the peak detector function.
    Take care about the threshold and width parameters of the peak detector.
    Take a look at your signal and decide the amplitude and width of the peaks you want to detect. The threshold is the amplitude above what you consider as a peak, the width is a little bit more complicated - to begin, 3 or 4 should be a good number if you signal is not too noisy - bigger widths will somehow do a kind of a low pass filtering to your signal.
    The position output of your peak detector is an array of locations where your peaks were found.
    Keep in mind you are now working in frequency domain and that position means something in the frequency domain.
    The array you placed as input of the peak detector is an array of points starting in f0 and separated by df (the other elements of the cluster).
    So to calculate the real value of the peaks, you have to multiply them by df and add them f0.
    Sorry by the big text and sorry if I went too much in detail,
    Hope it helps,
    Paulo

  • Video Controller (VGA Compatible): Code 1

    Help me! I am having "Video Controller (VGA Compatible): Code 1" It says I'm missing "Intel HD Graphics 3000", but when I downloaded it, it says my computer isn't compatible with it. What do I have to do?
    *This all happened when I got Windows 8.1*
    My system model: Dell System Inspiron N4110
    My Operating System: Windows 8.1 Pro 32-bit (6.3, Build 9600)
    My system manufacturer: Dell Inc.
    Plz e-mail me: [email protected]
    *Note: ONLY if you know the solution plz! No spam plz!!*

    Help me! I am having "Video Controller (VGA Compatible): Code 1" It says I'm missing "Intel HD Graphics 3000", but when I downloaded it, it says my computer isn't compatible with it. What do I have to do?
    *This all happened when I got Windows 8.1*
    My system model: Dell System Inspiron N4110
    My Operating System: Windows 8.1 Pro 32-bit (6.3, Build 9600)
    My system manufacturer: Dell Inc.
    Plz e-mail me: [email protected]
    *Note: ONLY if you know the solution plz! No spam plz!!*

  • Is Muse compatible with Email Service Providers. I found html code issues - PCs have viewing issues

    Is Muse compatible with Email Service Providers? A colleague said Muse has html code issues as PCs struggle to display the artwork correctly when emails are delivered.

    Is Muse compatible with Email Service Providers? A colleague said Muse has html code issues as PCs struggle to display the artwork correctly when emails are delivered.

  • Adding One Line Code in all tables in Designer Trigger.

    I have 300+ tables in my Schema (All tables generated through Designer), I want to add one line of code in the begining of "Before Inset Row Trigger" of all tables, So what is the fastest way of doing that,
    Adding One Line Code in all tables in Designer Trigger.
    I don't want to go and modify each and every table

    You'll have to write a script that reads out the current contents of your triggers, add your line to this contents and dynamically "create or replace" the new trigger text.
    Beware, trigger_body column of user/all/dba_triggers is in a column with datatype LONG, so you'll have to use some sort of conversion.
    Good luck.
    regards,
    Rob.

  • Serial Code Issue

    I purchased a full version of Adobe Photoshop CS4 Extended about a year and a half ago. I loaded it on my laptop just fine. However, following a HD crash, it's asking me for an upgrade check. I used the file just fine previously. How do I fix this issue?

    Your post is entitled "Serial Code Issue" but you make no mention of that in your posting.  You should provide the complete message that the software is providing to help make your problem clearer.
    If the message is indicating you need to provide a serial number to confirm upgrade eligibility it means you purchased CS4 as an upgrade to a preceding version and you need the serial number from that preceding version in order to confirm the eligibility of the new CS4 version.

  • Street line formating issue (number comes before the street name)

    Hello everyone,
    I have an issue regarding formatting of the street line - when I include an address field (say in Smartforms) the street number comes before the street name. This would be according to USA standards, but I need it to be formatted by the EU standards (street name, and then the number). Also, where ever we have an address attached (SU01, customer/vendor master recs, purchase orders, etc) we get the same issue.
    So, now it is: "1234 MyStreetName", but I need it to come as "MyStreetName 1234".
    I have tried SA10, SA09, OY01 (and all the other customizing I could find), none of which had worked. The strange thing is that in our IDES system, it is displayed as it should be (name - number).
    I can't find where this is preconfigured in IDES, so if anyone can suggest I would be very gratefull + points will be awarded for all the helpfull answers.
    Best regards,
    SD.

    This thread has been moved here:
    Street line formating issue (number comes before the street name)

  • PDF "line weight" issues

    When exporting my document (full of graphs and charts) from Microsoft Word 2010 into Acrobat Pro as a PDF, I am having "line weight" issues upon zooming in and out of the document.  Depending on whether I zoom in or out and to what extent, lines disappear, become thicker or thinner or criss-cross eachother; There seems to be no "line weight" problems when printing though.  Does anyone have an answer?

    Try changing the Rendering options on Preferences > Page Display. For example, make sure Smooth line art and Enhance thin lines are checked.
    There will be variation in previewing line weight because of the lower resolution of a screen. On the printer, which has higher resolution, you're seeing a more accurate preview of the objects.

  • How do I pass output from cmnd line code as a parameter into a shell script

    Hi,
    We're using GNU/Linux version 2.6.18.194.26.1.0.1.el15 X86_64.
    What's the bet way to pass the result of the following Linux cmd line code into a program as a parameter
    I have the following Linux cmd line code which returns 1 row of data,
    [fhs_clientdata@srvproddb3 ftpget]$ ./fhs_ftpget_tcpxps1_test_login.sh|grep bill| awk '{print $9}'| tail -1
    bill_file_txc_fseulyh1_20110101_180610.pgp
    Now I've tried a bunch of different ways to take this output and use it as an input parameter to another program.
    I've tried using pipe but that doesn't seem to work.
    Ideally I wanted something like
      ./fhs_ftpget_tcpxps1_test_login.sh|grep bill| awk '{print $9}'| tail -1|./loader
    where ./loader is the file that accepts the parameter.
    I've tried storing it in another file and loading form that file. That doesn't work.
    What can I do?

    $ ./fhs_ftpget_tcpxps1_test_login.sh|grep bill| awk '{print $9}'| tail -1
    bill_file_txc_fseulyh1_20110101_180610.pgpFirstly, this can be simplified:
    $ ./fhs_ftpget_tcpxps1_test_login.sh| awk '/bill/{result = $9} END {print result}'
    bill_file_txc_fseulyh1_20110101_180610.pgpand if you only want the very first bill then:
    $ ./fhs_ftpget_tcpxps1_test_login.sh| awk '/bill/{print $9; exit}'
    bill_file_txc_fseulyh1_20110101_180610.pgpis about a succinct as you can easily get.
    So, how do you want to supply the parameter to the other program? Maybe as a command-line argument? Like this:
    $ ./loader $(./fhs_ftpget_tcpxps1_test_login.sh| awk '/bill/{print $9; exit}')The commands in the *$(..)* tokens will be evaluated first, then the resulting standard output will be used as argv[1] or +$1+ to "loader".
    Cheers

  • EA4500 Intermittent Latency issue-Code Issue 2.0.37

    I have been using the WRT54GV2 wireless G router for a while with no issues. I have upgraded to the EA4500. Periodically I am experiencing bursts of high latency(local area network) which is affecting certain apps I use such as a cisco soft phone. I am using the 2.4ghz band and connecting around 150mbps.   What could be causing this? When I experience the latency issue, my data throughput fluctuates to different speeds as low as 60mb. I never had this issue on the older wireless router. I have upgraded my client drivers, could this be a code issue on the 4500?  I am on 2.0.37

    See if any of this helps.
    I had something similar and this took care of it.
     http://homecommunity.cisco.com/t5/Wireless-Routers/E4200V2-Bridge-Mode-wireless-disconnects/td-p/501...

  • Calculation of Tax Issue from FB60 (Tax Code Issue)

    Dear All,
    Normally when we purchase or received any services we post following entry.
    INVOICE VALUE IS 1000
    Purchase Ac Dr   1000
       To Vendor                   900
       T o Tax                         100
    But our requirement is that
    Purchase Ac Dr   1100
       To Vendor                  1000
       T o Tax                          100
    System should add cost of TAX  in purchase instead of reduction form vendor balance as we have to give 1000 RS to vendor.
    Can we create TAX code in this manner.
    This is not even possible form function available in Edit Option in FB60 (Calculate tax on Net Amount)
    Not even from TDS (Withholding tax)
    WE CANu2019T SUGGEST POSTING JV IN THAT CASE.
    Regards,
    Bittu

    Apologized for that Atif.
    Withholding Tax Type does not control Vendor line item.
    My issue is that system should not reduce value enter in vendor  amount field.
    System usually reduce amount which is payable to vendor
    Please see my example once again. I also mention that it is not working from Withholding Tax nor form Tax code(FTXP)
    Edit option in FB60 is also not useful in this case.
    Regards,

  • SSRS 2008 Line Chart Issue.

    We are facing an issue with SSRS 2008 charts. We have a report which shows dynamic number of series on a line chart. The data values may not exist for all series for
    the same x axis points. We expected SSRS to connect the missing points as average and have set the empty point option to average.
    The issue is that the
    1)     
    lines for interpolated points only appear when we set the color of empty point to say red and not when it is set to automatic. We need the interpolated line in the same auto
    colour as the original line as we will have markers for the data points from the DB and no markers for empty points.
    2)     
    The interpolated lines extend backwards in the series also – we expect it to only fill the gaps and not extend backward or forward.
    Are these issues known and is there a work around for these issues ? We got your name from one of the SSRS community discussions. Could you please connect us with
    the right person if you are not the right contact for this issue ?
    I also got following reply from one of the MS guy, it says
    Hi Akshay,
    The lines should not go backward.  I have seen this happen before and I’ll have to double-check on what that occurs. If you
    are using a Category Axis, make sure you set the sorting to use a Cdate() expression.  I think that might be it ,but I’ll have to double check.
    As far as using the auto-coloring on the series when you have empty points like this, I don’t think that’s possible.  It would require
    a DCR.  You may need to implement something along the lines described in this article  http://msdn.microsoft.com/en-us/library/aa964128(SQL.90).aspx.
    When I tried the suggestions I over come the auto colouring issue and also used CDATE () but lines still extend bacawords. Can anyone suggest what to do it this situation

    Hi AKshay_Jadhav,
    Firstly, I am not sure who is that MS guy you mentioned without the detail name. Based on my understanding to your issue, I think you could utilize the function
    IsNothing in reoprting services to have a check whether the value is null, if it is Null, you should give a average value to this point, if not leave it to be the original value. Of course, you could achieve this in T-SQL. To
    the color and marker, we could type in the expression in both feature to control their display effort.
    Hope this helps.
    Thanks,
    Challen Fu
    Challen Fu [MSFT]
    MSDN Community Support | Feedback to us
    Get or Request Code Sample from Microsoft
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • TEXT Mail line break issue in Email body

    Email content is breaking up when the preference is MAILTEXT.
    Please see the comments Line Break.
    Ex:
    Dear --Line Break
    PETER,
    Thank you for contacting XXXXX. The service request number 547631 has been created for the following issue:
    Testing Notification
    A technical support representative is working to resolve your issue.
    Because we recognize that many of our customers would prefer to find answers conveniently on our website, we'd like to invite you now and for future needs to search our Knowledge Base online at:
    If --Line Break
    you have any questions or concerns, please contact us at XXXX or XXXX and have your service request number available for the technical support representative.
    Thanks --Line Break
    again, and we appreciate your continued business.
    We are on 11.5.9 and WF version is 2.6.0

    If you have not got a resolution for this issue still, this was a bug in Workflow code and fixed in OWF.H I believe. Please search for Oracle Workflow one-off patches if an one-off was released for 11.5.9.
    Thanks

  • Non Dedutable tax code issue

    Hi Gurus,
    I have one issue, User Created PO with non dedutable tax code and Did GR and while doing IR
    Invoice Account Details
    Posting        Accounting        G/L Code             Act/ mat/Ven             Amount
    1                   K                        220000               Vendor code               5050.02-
    2                   S                        230000                GR/IR Clearing Acc     4449.39
    3                   M                        110950               Material code               600.66
    Issue is tax amount is 600.66, Why it is posting Accounting Key M as this is non dedutable tax code, so as per my understanding
    System shoud post 600.66 to GR/IR clearing account, so why it is posting to M.
    Please suggest where it is went wrong?
    Anil

    hi,
    as in your case you are not availing the cenvat credit, instead you are loading the same on the inventory as you could not avail it.hence the system has loaded the cenvat credit on the material that why you are getting sepearte line item in the accounting doc.
    in the tax procedure you would have assign NVV accounting key against the condition type. you define the details of NVV in OBCN trx where you would have mentioned as seperate line item(2) against the posting indicator. if you have maintained (3) against the posting indicator then it would distribute the expense /revenue item.i.e nothing but your GR/IR account
    Regards,
    velu

Maybe you are looking for