Controlling two instruments with LView (APIB and GPIB) SINAD testing

Well I am having mixed results here. Part of my problem is that I am an extreme noob. ALthough i have had a few weeks getting into LabView and using instrument drivers etc..
I am using Labview 8.2.
I am trying to control two instruments: (AP2722)Audio Precision and (SMIQ) Rohde & Schwarz.
This is for SINAD testing.
The AP analyzer does not have an instrument driver and uses APIB...so i have to use ActiveX control.
The SMIQ has an instrument driver.
Will I be able to use/control the both of them within one project of LabView?
I am trying to control each one separately but at some point I have to bring it all together. Just wondering if LabView will even do this for me.
thanks if you know.

Driver attached from HERE
The mnu's seem screwy but the Tree shows a complete PnP project structure- Hierarchy View shows its reasonably organized. APIB Seams like a specialization of the GPIB bus optomized for the AP language time constraints
Jeff
Attachments:
Audio_Precision_2700_Series__1.0.1_.zip ‏2174 KB

Similar Messages

I have two different accounts with I-tunes and I want to link both purchases for my music to one account. How can I do this?

I have two different accounts with I-tunes and I want to link both purchases for my music to one account. How can I do this?

You are going to need to change the email address you use with your old ID. Once you have got access to your old account you will then log into both accounts at the same time on your Mac and transfer your data to a single account. We can do this later, but need you to get access to your old account first.
My Apple ID

I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard.

Good Morning,
I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
I also rebooted holding down the shift key and still no Snow Leopard
Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
thank you.

Have you restarted holding down the Opt key? That procedure should give you a gray screen with all of the partitions that exist. Then select the SL partition for boot. Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.

I have published two different blogs with different usernames and passwords

I have published two different blogs with different usernames and passwords. When I want to publish one, it goes through the whole process of publishing the other blog as well - and takes too long.
How can I publish each blog separately?

I have published two different blogs
I think you need to ask in the iWeb forum rather than this one (for iWork/Numbers):
http://discussions.apple.com/forum.jspa?forumID=1309

Automating the process of comparing two PDF file with the help of QTP(Automation Testing Tool)

Can anybody help me with comparing the two pdf files with the help of QTP.I have Adobe Acrobat installed on my system and i have access to the API.
Thanks,
Varun Saini

I want to find out more about QTP and API. Maybe that is what I want to compare two mechanical drawings for differences between them. (see “More than one pdf file in one window”. Is that what you are looking to do? 9Not necessarily mechanical drawings but some other pdf).

DB Copy (MSSQL) between two SAP systems with different level and Components

Hi,
we have a SAP system release mysap 2004 SR1 and for "the upgrade project to SAP ECC 6.0 " we installed a new mysap 2004 in a new hardware (sap03) where we have also solution manager running. The new installed Mysap 2004 SR1 is alos running fine in the new hardware.
Now we would like to do DB copy from the old system (sap02) to the the new system sap03 and then we will do the upgrade to SAP ECC 6.0.
After I compared the two systems I have following questions:
1) there are 4 Software Components which are not in the new system (sap03). This are:
PI
FIN_BLERP
BP_INSTRASS
Is this necesary for the DB copy or we do not need this to be able to do the DB copy?
2) The Software Components Level is not the same. Should we have the same level to do the DB Copy?
Thanks in advance
Best regards
HanseAtik

Hi Juan, hi Clas,
just to be clear and to not stuck on the the way:
The systems are as follow:
1) the source system:
                     - Windows Server 2003,
                     - MSSQL Server 2005 with 32 bit.
                     - Mysap 2004 SR1
2) Target system:
                   - Windows Server 2003
                   - MSSQL Server 2005, with 64 bit.
                   - Mysap 2004 SR1 (with less Support package level and no PI, FIN_Basis, BP_BLERP and BP_INTASS coponents)
I hope this will work. could you post the link the DB Copy guide we are talking about?
By this way we will be sure that we are talking about the same DB Copy. Otherwise any mistake in this step will cost more work and time.
Thanks in advance
Best regards
HanseAtik

Two mail accounts with same name and SSL not allowed?!

Dear Common Wisdom:
I have two accounts in my Mail program with the same web host. That means the outgoing mail server has the same name.
If I put on SSL, though, it is not allowed to save two servers with the same name in two different accounts.
Can I get around this and still use SSL for both accounts?
Thanks!
Kostas

Each domain is expected to refer to its own unique database schema. Same SOA schema should not be shared by multiple SOA clusters/domains. It is technically possible though, I suppose, and still can run fine any one SOA environment at any given time with the other SOA environments/domains (sharing the same SOA schema) shutdown. It is not the general/recommended practice to share SOA schema across domains and there could be potential implications and unexpected behavior, particularly when the SOA environments pointing to the same schema are all running at a time.

Connecting two Entity Instances with global Entity and amongst themselves

Hi,
Is there a way of storing in the relationship between two instances of the same entity?.
For instance, there is an entity called : the household member(hhm)
and a global entity called the central character(cc).
Let the hhm be: A, B, C
and the cc: D
Is there a way of asking for and storing the relationships that A shares with B and C, and that shared between B and C?. And the one shared by al of them with D?
Please let me know if the case is not clear and any further clarity is needed.

Hi Davin,
Appreciate the prompt reply.
By "the relationships that A shares with B and C", I meant to find a way of capturing the relationship that different members of a household may share.
Lets assume that the form is being filled by one of the household members, now I am looking for a way to capture the relationship that the form-filler shares with other household members+ the relationship that these household members share with each other.
I hope i have cleared your doubt to a certain extent. Please let me know if you have any other misgivings.
Lokesh

Two User IDs with one iPhoto and iTune Library

I'd like to set up the user permissions on my MacBook so that two different users can have access to the same iPhoto and iTunes libraries. I've set up both users as administrators. I've tried moving the libraries to the SHARE folder, but that didn't work. In the GET INFO menu I set up both users with READ&WRITE access. This works for one user at a time, but I cant set it up so both users have access.

Hi Michael ...
Try these support articles ...
iPhoto: Sharing libraries among multiple users
and Understanding Home Sharing

How do I run two Apple IDs with one computer and sync music content?

I have a single PC which I have added all of the music to one my log in. My wife and I have Iphones and I want to run separate accounts for itunes, but sync music content from the single source to both phones. Whenever I have tried to do this in the past, it starts to sync all app to both phones. I tried to therefore have separate log ins on the pc itself, but when I have tried this, the music content does not update on my wifes itunes library, after I have added music to mine (ie imported a CD), even though I have linked my wife's music library for itunes purposes to my music folder (hopefully that makes sense!!). Can anyone help as this is driving me mad, otherwise I will just have to run from my account and delete all of my wifes apps etc whenever I sync my phone, and vice versa.
Thanks!!!
Jeremy

Is the following document of any help with that?
[How to use multiple iPods with one computer|http://support.apple.com/kb/HT1495]

Hey, does anybody know how can i have two different apple ids on my mac imessages, because i have two mobile phones with different ids and i would like to be able to send imessages from both accounts on my mac. Tnx

Hey does anybody know how to set up 2 apple ID on mac imessages? Because i have 2 different iphones and i would like to send imessages fron both accounts on my mac...

Associate your mobile numbers with your Apple ID, if you haven't already done so.
Sign out of iMessage on the Mac:
Messages ▹ Preferences ▹ Accounts ▹ Sign out
and on the iPhone:
Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
Then, on the phone, tap
Use Your Apple ID for iMessage
Sign back into iMessage on both devices and test. If there's no change, you may have to wait for a change in network conditions.
Credit for this solution to ASC member SmittyLove and to Glenn Fleishman of tidbits.com.

Two Dimensional Report - With FTP download and formatting in EXCEL

Hi all,
I have a ztable with customer,daily quantity , date as columns. I need to make a report with date as rows and customer as columns . If a new customer is added in the ztable , one more column should come in the report.
Basically the internal table should change <b>dynamically</b>.
I have to download this report into FTP and should save as .xls file. All formatting that are there in SAP has to appear in the Excel Sheet also.
Is there any function module for Dynamic Internal Tables and make <b>formatting changes in EXCEL</b> ??
Thanks in Advance..
Vivek Krishnan

for dynamic columns, i am explaining u how to create with an exmaple, check it,
suppose itab has fields A, B, C.
SO ITAB-C HAS THE VALUES OF C. NOW WE WANT A TABLE WITH VALUES OF C RIGHT!!.
NOW BUILD A FIELDCATALOG LIKE BELOW.
LOOP AT ITAB.
LS_FIELDCAT-FIELDNAME = ITAB-C.
LS_FIELDCAT-COL_TEXT = ITAB_C.
APPEND LS_FIELDCAT TO LT_FIELDCAT.
ENDLOOP.
DATA: DREF TYPE REF TO DATA.
FIELD-SYMBOLS: <TEMP_TAB> TYPE ANY.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = LT_LVCFIELDCAT
IMPORTING
EP_TABLE = DREF.
ASSIGN dref->* TO <TEMP_TAB>.
<TEMP_TAB> IS THE REQUIRED DYNAMIC INTERNAL TABLE.
NOW IF U WANT TO FILL THE DYNAMIC INTERNAL TABLE.
DO AS BELOW..
DATA: WA_DREF TYPE REF TO DATA.
FIELD-SYMBOLS: <WA_TAB> TYPE ANY.
CREATE DATA WA_DREF LIKE LINE OF <TEMP_TAB>.
ASSIGN WA_DREF->* TO <WA_TAB>.
FIELD-SYMBOLS: <FS1>, <FS2>.
LOOP AT ITAB.
ASSIGN COMPONENT ITAB-C OF STRUCTURE <WA_TAB> TO <FS1>.
<FS1> = {SOME VALUE}.
APPEND <WA_TAB> TO <TEMP_TAB>.
ENDLOOP.

I made two picture cds with dvd r and computer says incompatible. cyberlink to go was used

I have a HP Pavillon 6gbyt desk top computer, I used Cyberlink to Go to make two picture Cd's using a DVD+R disc. I got it to work fine, but after it would not play the cd on the computer or the tv dvd player saying it's incompatible. I was able to use a portable DVD player but it kept formatting each picture. I made these for grandchildren, so am anxious to figure out what is the problem. It said it was writing and burning fine, but won't play. Please help.

Hi,
Please let me understand what are you trying to do: Do you want to make a slideshow DVD of many photos for your grand children. The DVD can play on ANY DVD player ? Is that right.
If YES, you need to tell CyberLink to use video format to burn. I normally use Windows DVD maker, much easier and it can't be wrong.
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Two specific problems and two other questions with Razr Maxx and ICS

Like everyone else, I dl'd ICS this weekend and I've (re)setup things which were there and navigated around fairly well. However, I've noticed a few things to which I can't find an answer.
1.) I have my phone locked via an onscreen password. Before ICS (i.e with GB), when I typed the password, it would not flash the letters/numbers in blue (or whatever color) above the keys as I typed. Now it does. Where do I find the setting so it doesn't?
2.) I have Verizon and before ICS, when I'd send a text to a non-Vzn. user, I'd always get a 'broken' arrow and the delivery was always "Pending" (even though most of the time they actually received the message). When I'd send a text to a Vzn. user, a 'solid' arrow would appear and the Report would show "Received".
Now, no matter if they're a non-Vzn. or a Vzn. user, it never shows "Received". It always shows "Pending".
Is that a bug in the ICS or Vzn. or a combination of both (and does anybody else have that problem, and if so, is there a way to fix it)?
3.) On the top, where it shows '1X' (i.e. 2G), 3G or 4G/LTE, what's the difference between when it appears white color and a blue color?
One other thing - does anybody else notice the on-screen keyboard is different now?
Thanks for anyone's help - I appreciate it.

That Option isn't Available! You can't Mark it Solved any More But you can Give Points as (Correct & Helpful Answers):
That option Went a way when moved From Lithium to Jive.!
Actions
Edit
Move
View as PDF
Receive email notifications
Stop tracking
Legend
Correct Answers - 4 points
Helpful Answers - 2 points
Update: To answer this Further Correct Answers would probably be the Equivalent to Marked Solved But only the OP would be able to Do this and the Post would have to set up as Question type of Post..

Help with Server Structure and File Identification / Test vs Remote vs Local

I inherited a website at a new job. I have 0 experience with building websites, let alone DW and have only been through the beginning tutorial. I feel I am ready to make my first edits to the website.
We have two servers, test and remote. I have files saved in C: under wamp folder. When I am connected to test server, the folder structure doesnt change, but the folders turn red. If the folders are not red, I am working from the local file? If the folders turn red, I am working from the Testing Server copy? And if so with the red folders, why is the file path still the same, C:\wamp etc...?
Thanks -
John

Sounds about right.
I have my local site folder inside WAMP/www/ so when I save local files in DW, they're immediately saved in the testing server. This also allows me to see parsed content in Live View or Live Code.
Nancy O.

Controllin​g two instrument​s with LView (APIB and GPIB) SINAD testing

Similar Messages

Maybe you are looking for

Controlling two instruments with LView (APIB and GPIB) SINAD testing