Controlling 2 different iPad apps (digital mixer and DMX lights) using one airport express

Hi,
I'm using an AIRPort Express 802.11n for my digital mixer MACKIE DL1608 which is controlled by my iPad ie. iPad (app is Masterfader) talks to airport express, from LAN out to ethernet to mixer.  My question is: can i use the one airport express to also run another device by using some kind of double LAN out adapter?  I also want the same iPad to controll my DMX lights ie. iPad (app is Luminair) talks to airport express that connects from LAN out to ethernet to lights controller.
Otherwise if I need to get two seperate airport expresses, are there any complications with having them sitting close to one another (as I will operate them from the same carry case)?
Thanks in anticipation

A small ethernet hub or switch should be able to handle that.

Similar Messages

  • How do you set up a MacBook Pro and a PC with one Airport Express?

    I have a MacBook and my roommate has a PC and we're trying to set up my new Airport Express at our college so we can hook up our computers and printers to it. I had it so that my laptop worked fine, but hers would "connect" and not really have any internet connection at all. Class starts on Thursday, so help would be kindly appreciated!

    I'm a great believer in the KISS principle.
    Configuration is simple if you start from a factory default condition.  Connect the Airport to AC power and finally to the Internet modem (or modem/router).  Open Airport Utility on your Mac or other computer and accept all of the recommendations.  After confirming that it works, insert your desired administrative and WiFi passwords.
    Do not expect the Airport to respond instantly to the configuration commands.  BE PATIENT!

  • Just updated to itunes 10 and now cannot use my airport express message comes up ERROR (-15000)

    Please help

    I'm having the same problem! I updated iTunes and now the program opens but doesn't respond to certain commands. HATE HATE HATE...
    I'm reinstalling now thinking that may help...fingers crossed.
    I'll have no other way to load up my iPad, or the 3 iPhones in my house!

  • HT1515 Can I use two Airport Express, one being the connection to my Internet Provider and the second one, being an extension to my wifi?

    I would like to know if with them I could use one Airport Express as the connection point to my ISP and the second one, just to extend the wifi range. Anyone knows about this ?

    Yes you can.
    But, remember that the AirPort Express is a router only. It does not have a modem on board, so you will need a modem to connect to your ISP.
    Then, connect one Express to the modem and configure it to "create" a wireless network".
    Configure the second Express to "extend" a wireless network.

  • My mum is always using my iPad and I want to set mode if you like that she can log in as some one different and use apps she likes and I can use a diFferent log in and use different apps and stuff

    My mum is always using my iPad and I want to set mode if you like that she can log in as some one different and use apps she likes and I can use a diFferent log in and use different apps and stuff

    iOS 7 does not support multiple user accounts like you want.
    If all the apps are different, you could set her up with her own page of apps, then just show her how to get to her apps page, or just buy her an iPad for herself.

  • Purchased ipad app is installed and cannot be viewed or synced although it appears on the computer.

    purchased ipad app is installed and cannot be viewed or synced although it appears on the computer.

    Try resetting your iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Audigy 2 ZS and external digital mixer and digital cd pla

    Guru's,
    I've got a problem getting a sound from my Audigy 2 ZS card in combination with an external digital mixer and a digital cd player. One channel of the mixer receives data from the PC (Audigy 2 ZS) and one channel receives data from the CD player. The mixer is connected to a dolby surround system- dvd player that connected to the speakers. When I try the digital out I don't get any sound, when I use one of the analog ports I do get a sound. What is here the ideal set-up and why can't I use the digital out ?
    Here's also a picture:<IMG src="http://www.delier.demon.nl/Conf.bmp">

    Dmob wrote:
    Guru's,I've got a problem getting a sound from my Audigy 2 ZS card in combination with an external digital mixer and a digital cd player. One channel of the mixer receives data from the PC (Audigy 2 ZS) and one channel receives data from the CD player. The mixer is connected to a dolby surround system- dvd player that connected to the speakers. When I try the digital out I don't get any sound, when I use one of the analog ports I do get a sound. What is here the ideal set-up and why can't I use the digital out ?Here's also a picture:<IMG src="http://www.delier.demon.nl/Conf.bmp">
    Do you mean, you do not get digital out from Audigy?
    If yes, then have you set Audigy for digital output?
    See Audigy User's Guide for options (if you don't have one, you can download it herefrom.
    .jtp

  • Had iPad apps on iTouch and they ran fine. synced several times

    I have a new iPod iTouch. I have downloaded several  iPad apps on iTouch and they ran fine. I synced several times with not a problem.  Now the iPad apps have disappeared off my iPod ITouch. I have not deleted them and the iPad apps remain in my library.  Not sure why they have disappeared and I can't get them to download back to iTouch. I have deleted the iPad apps from my library and re-downloaded but they won't sync.  I had a previous iOS and updated to iOS6.1.3 version.

    Contact the developer and ask
    Technical Support
    HMH Mobile Device Team
         Phone: 800-419-3900, Select Option 1, then select Option 3
         Email:[email protected]

  • Can I share my internet with my Ipad and simultaneously connect to a airport express that I use to remotely connect speakers?

    Can I share my internet from my Imac with my Ipad and simultaneously connect to a airport express that I use to remotely to connect speakers?
    The big problem that I'm having is that when internet sharing via the airport I can not simultaneously connect with my airport express.  It would be great to be able to share internet from my Imac so I can be using my Ipad and at the sametime have my wife use the airport express to stream music in a different room. It would be awesome to be able to have the ability to do both. Does anybody know how?

    Unless your iMac was made before 2006 (this forum is for old iMacs), you might get better assistance by posting in one of the following forum areas:
    AirPort
    Using iPad
    iMac (Intel)

  • DAQ vi to perform digital write and read measurements using 32 bits binary data saved in a file

    Hi
    DAQ vi to perform digital write and read measurements using 32 bits binary data saved in a file
    Two main
    sections:
    1)     
    Perform
    write and read operations to and fro different spread sheet files, such that
    each file have a single row of 32bits different binary data (analogous to 1D
    array) where the left most bit is the MSB. I don’t want to manually enter the
    32 bits binary data, I want the data written or read just by opening a file
    name saves with the intended data.
          2)     
    And
    by using test patterns implemented using the digital pattern generator or  build digital data functions or otherwise, I need to
    ensure that the     
                binary data written to a spreadsheet file or any supported file type
    then through the NI-USB 6509 is same as the data read.
    I’m aware I can’t use the simulated
    device to read data written to any port but if the write part of the vi works I
    ‘m sure the read part will work on the physical device which I’ll buy later.
    My Plan
    of action
    I’ve
    created a basic write/read file task and a write/read DAQ task for NI USB 6509
    and both combine in a while loop to form a progress VI which I’m confuse of how
    to proceed with the implementation.
    My
    greatest problem is to link both together with the correct functions or operators
    such that there are no syntax/execution errors and thus achieve my intended
    result.
    This
    project is one of my many assignments for my master thesis, so please i’ll
    appreciate every help as I’m not really efficient with LabVIEW programming but
    I prefer it because is fun and interesting if I get to know it.
    Currently I’m
    practicing with LabVIEW 8.6/NI DAQmx 8.8 Demo versions and NI USB 6509
    simulated device.
    Please see
    the attached file for my novice progress, thanks in
    advance for the support
    Rgds
    Paul
    Attachments:
    DIO_write_read DAQ from file.vi ‏17 KB

    What does your file look like?  The DAQmx write is expecting a single U32 value, not an array of I64. 
    Message Edited by vt92 on 09-16-2009 02:42 PM
    "There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal

  • Hi, I`d like to connect my Ipad wirelessly to a stereo to listen to my music from the iTunes library on streaming, but also to movies online, games, Goear-) and so on.  I guess I can do that using an Airport express connected to the stereo and via airplay

    Hi, I`d like to connect my Ipad wirelessly to a stereo to listen to my music from the iTunes library on streaming, but also to movies online, games, Goear…) and so on.  I guess I can do that using an Airport express connected to the stereo and via airplay to my Ipad. My question is, can I listen to all the audio that come out from the ipad (movies online, games, Goear…) or only to the music from iTunes library? I`d appreciate any help. Alex.

    My question is, can I listen to all the audio that come out from the ipad (movies online, games, Goear…) or only to the music from iTunes library?
    On the iPad you can stream videos, photos, or music from the Video, Photos, Music, and YouTube apps to an Apple TV OR just stream music to an AirPort Express Base Station.

  • I have bought the verizon iPad 2 from US and want to use it in India. How to set up the Indian CDMA carrier on my iPad 2

    I have bought the verizon iPad 2 from US and want to use it in India. How to set up the Indian CDMA carrier on my iPad 2 ?

    rahulmcadit wrote:
    The phone is from UK and the carrier on which phone has been locked is "ORANGE". I want to use the same phone in India. I want to unlock the phone. Can you please suggest me what is the procedure to unlock the phone. How can I pay the amount to ORANGE carrier and can use my iphone in India.
    Contact ORANGE to unlock it.
    See this -> http://support.apple.com/kb/HT5014

  • I bought an iPad mini from us and want to use it with LTE in UAE

    I bought an iPad mini from us and want to use it with LTE in UAE, is it possible ?

    http://www.apple.com/ipad/LTE/

  • I recently bought an Airport Express and connected it to my TimeWarner modem. Am able to surf the internet using my MacBook Air, iPad, and Apple TV, but the AirPort Express has a blinking amber light. How could I change it to a green light?

    I recently bought an Airport Express and connected it to my TimeWarner modem. Am able to surf the internet using my MacBook Air, iPad, and Apple TV, but the AirPort Express has a blinking amber light. How could I change it to a green light?

    The following may help: Wi-Fi base station: Understanding and resolving a blinking amber status light

  • I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

    I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

    Hello Hornet12,
    Indeed, iTunes 10.2 or later will be required to utilize AirPlay.
    Using AirPlay
    http://support.apple.com/kb/HT4437
    AirPlay requirements and capabilities
    To get full AirPlay features, make sure your AirPlay-enabled devices are running the latest software updates. The table below identifies minimum AirPlay requirements and capabilities:
    Stream content from
    Requirement
    Notes
    iPad
    iOS 4.3 or later.1
    From the Videos, iPod, Photos, Music, and YouTube apps on iOS devices, stream videos, music, and photos to an Apple TV (2nd and 3rd generation), or stream music to an AirPort Express or compatible third-party device.
    With iOS 4.3 and later, you can also stream video and audio from a website or a third-party app installed on your iOS device if the developer for the app or website has added AirPlay functionality.
    iPhone (3GS or later)
    iPod touch
    (2nd generation or later)
    Computer
    iTunes 10.2 or later.
    Stream videos and music from your iTunes library to an Apple TV (2nd and 3rd generation), or music to an AirPort Express or compatible third-party device.
    Apple TV
    Apple TV software version 5.1 or later.
    Stream music from your Apple TV to another Apple TV (2nd and 3rd generation), to an AirPort Express or compatible third-party device.
    Cheers,
    Allen

Maybe you are looking for

  • Help, I am killing myself trying to do this and I need help ASAP

    I need help with this program it has to act like a cash register. The user will input an items price and then their payment. It will tell you the change and then tell you what kinda of change to use, see example below: Use JOptionPane to take inputs

  • Printing through a Windows computer.

    I'm working on a 1GHz Power Mac G4 desktop that is connected with Ethernet to a Linksys BEFW11S4 wireless router. The printer is connected to a Dell Dimension 4300 by USB. The question for me is, even though I can get the printer to show up in my pri

  • How do I bring up color gradually on a slide?

    I am new to Keynote and to making presentations. I have just about zero familiarity with Keynote tricks of the trade or lingo, so please keep that in mind if you answer my question. I recently got as an e-mail attachment a PowerPoint presentation tha

  • Powerbook dead? Sleeping? Playing games with me? Please help!

    Please advise me about what to do with my 15" aluminum G4 1.25 GHz Powerbook. Often it won't start at all, and if it does, soon it freezes solid (screen still up, but no response to the trackpad or the keyboard) and I have to force it to quit or remo

  • Importing to Ai from INKSCAPE

    I created a logo for my boss.  I was using INKSCAPE, (a vector program).  I sent an svg file to the people who were going to print it and use it for other things.  The blurred drop shadows and gradient did not carry over.  Those people are using Ai.