Controlling a Movie within a Movie

Hi everyone,
I have a captivate movie (movie A) into which I would like to
insert another animation (movie B) with the Insert > Animation
command. This works fine. However, I would like the playback
control of movie A to also control the playback of movie B. Is this
possible? Othewise, I would have to have two playback controls
which is very confusing for the user. I have seen a Captivate
example where this seems to function correctly, but I cannot figure
out how it was done.
Thanks,
Jesse

Hi Jesse
Can you tell us where you saw the movie you did? To my
knowledge, there is no way to do this. At least, not using
Captivate without bringing Flash or Swish into the picture.
Cheers... Rick

Similar Messages

Movement type 122 Error while GI" Update control of movement type is incorr

Hai Gurus,
I am having an errow when doing a GI thru movement type 122. i am getting this error message " Update control of movement type is incorrect (entry 122 X X)" Can any one help me how to fix this.
I did this transaction using MIGO_GI and selecting Goods issued and other as the options with 122 as movement type.
warm regards.
mahesh.

Hi
Mov type 122 is return to vendor if the qualtiy of Goods is Poor / Quality
Regatds
AKM

Update control of movement type is incorrect

while planning for a material with mrp type pd and strategy group as 20(make to order) i created a customer requirement against which after running mrp the tran md04 showed purchase req for a particular material which was released by me and converted into purchase order by me.
but when I wanted to do goods receipt against the po generated it is giving me this error in tranc migo.
ERROR IS "update control of movement type is incorrect entry (101 X X e b _ v)
the performance assist screen shows this
Update control of movement type is incorrect (entry 101 X X E B _ V)
Message no. M7226
Diagnosis
The system could not find entry 101 X X E B _ V in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.

Hi
Check the T code OMJJ for the defining the MVt type also check the error is coming for MVT type 101 then check with mvt type 101 in t code OMJJ and check the updation control there.
also consult your MM consultant for this error
Regards
Anupam Sharma

Update control of movement type incorrect

Dear all,
I have run a complete sales cycle from sales order creation to excise invoice generation. However, I have not done the PGI since in our case it is done after the billing. The materials have been dispatched and excise invoice submitted.
Now, when I am doing PGI it is throwing an error "Update control of movement type incorrect (entry 601 _ X Q L _ V) ". I analysed and found that I have wrongly filled the Requirement Type in the sales order and corresponding entry is missing in OMJJ.
1- I tried to add this entry but in vain. There is no 'New entry' or 'Copy as' button and hence i could not add..
2- So, I tried the other alternative i.e. reversing all the documents and changing the RqTy in order. But that can't be done since excise has been sent.
Is there any other way by which I can do the PGI or atleast capture the goods movement in the system and also update all the relevant documents?
Plz guide.
Thanks
SAPshed

To do the PGI / PGR , you have to cancel the Excise Invoice through J1IIN and then the Billing Document.Only after this , you can do the PGR or PGI.
Best Regards,
Ankur

Control-F2 "Move Focus to Menu Bar" only works occasionally

I don't want to use my trackpad too much due to a strain injury, hence I use the Control F2 "Move Focus to Menu Bar" a lot.
However this feature only works occasionally, it can work for hours and then suddenly stop working, sometimes I can fix in the Keyboard Shortcuts pref pane by unchecking and checking the "Move Focus to Menu Bar" checkbox, at other times it takes a restart of the system.
I've been a big Apple fan-boy since OS 9, and I always marvel at the cool features in OSX, this is the first time I have a Windows-esque experience with the OSX UI
I've also posted the above on the Apple Stackexchange, but nobody knows how to fix this.

I too prefer to use the keyboard over mouse/trackpad. Being a switcher from Windows the default keyboard shortcut to "Move focus to the menu bar" of ^F2 (ctrl+F2) was just too awkward a combination for me, and so I redefined the shortcut to be ⌘-space (cmd+space) which is much closer to what I'd been used to in Windows (Alt+space).
This has worked most of the time, from OSX 10.3 in 2004 right up to this weekend in 2011, using 10.6 whereas it now fails most of the time.
What has happened to cause this turnaround? In trying to discover what I'd done "wrong", I noticed that for the first time this weekend I'd run Voice Over (the OS X app). And probably by no coincidence, now, I can only successfully execute my keyboard shortcut to "Move focus to the menu bar" during the introductory announcement of Voice Over: "Welcome to Voice Over. Voice Over speaks descriptions of items on the screen and can be used to control the computer using only your keyboard. If you already know how to use Voice Over press the V key now. If you want to learn how to use Voice Over press the space key now". Hence, I have about twenty seconds of available time to use my ⌘-space (cmd+space) shortcut.
I can achieve a working shortcut by reverting away from my ⌘-space (cmd+space) shortcut, and restoring the default ^F2 (ctrl+F2), or some other different shortcut such as ⌘-, (cmd+comma).
So, I wonder, if my experience adds anything to the [already slightly stale] discussion?

Controlling Captivate movies from a parent Flash movie

Hello, i am in the works of onverting my old AS2 code, for controlling Captivate movies lodaded into a Flash container, over to AS3 becasue of the transition to Captivate 5. There were some weird issues in AS2 and Captivate 3 which i fortunately vere able to solve when i first made this container. Now i am getting weird and unpredictable results when trying to set the appropriate variables in the Captivate move. The main culprit is: rdcmndRewindAndStop, it does indeed rewind the movie, but... it starts playing again... Could anyone be so kind to give me the reason why or better even provide me with a solution to this unneeded change, its quite annoying, and no rdcmndPause does not help, not before rdcmndRewindAndStop or after, the movie is happily trottling along...
sincerely
Frustrated developer with a bloody short deadline

Hello and thanks for replying, yes it worked! But... we have to manually edit 40+ files to make this stupid thing to work... Do you know if there is any way i can put those scripts in a flash object, or better even modify the movie from the parent container? This is making our production process way longer than is affordable tbh, a single project consists usually of over 100 captivate movies, and we simply can't manually edit each and every one of them.
I wish i could get my hands on a Captivate developer ;p

Controlling parent movie from a loaded movie

> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3264494197_595630
Content-type: text/plain;
charset="US-ASCII"
Content-transfer-encoding: 7bit
Hi!
I have a swf file which I call "Stage" and it contains 3
scenes.
In scene 1 of Stage, I have another swf- "Info1." loaded on
level 10. I know
how to get Info1 to unload and load Info2 but what I am
trying to accomplish
is when I click on Info1, it loads Info2 and it also go to
Scene 2 of Stage.
Is there anyway I can do this?
I appreciate any input.
Thank you.
K.
--B_3264494197_595630
Content-type: text/html;
charset="US-ASCII"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>Controlling parent movie from a loaded
movie</TITLE>
</HEAD>
<BODY>
Hi! 
 
I have a swf file which I call "Stage" and
it contains 3 scenes. =
 
 
In scene 1 of Stage, I have another swf-
"Info1." loaded on level=
10. I know how to get Info1 to unload and load Info2 but
what I am trying t=
o accomplish is when I click on Info1, it loads Info2 and it
also go to Scen=
e 2 of Stage. Is there anyway I can do this? 
 
I appreciate any input. 
 
Thank you. 
 
K. 
</BODY>
</HTML>
--B_3264494197_595630--

Never mind - I was doing something very stupid and wasn't
calling the function as a method of a movie clip. I was simply
calling checkTarget(event) rather than
event.currentTarget.checkTarget(event); which seems to work.

Controlling QT movies in a slide... no controller in KN 3?

I just got my copy of Keynote 3 hoping two things had made it to this new version:
1. HTML export... no go.
2. QT movies' controller available to pause, stop, rewind, ffw,etc. a movie in a presentation... I couldn't do it either....
Has someone been able to do this? I just can't believe that after so many users asking for this and griping about it Apple did not include it... after all, it seems to me it's a basic function of their own media player...

are you referring to an option on Export? When I go
to File/Export the options I get are Quicktime,
PowerPoint, PDF, Images, and Flash. No HTML... I have
been using flash as export, but would like something
similar to the html exporting function present in
PowerPoint.
It sounds like you're running Keynote 2.0. Perhaps you launched Keynote from the icon on the dock? I've noticed that the installer leaves the old version of Keynote around. The new version is in a "iWork '06" directory in your applications folder.
The new export panel is noticeably different from the old. It has a top row with buttons instead of a panel with buttons going down.
There is the ability to control QuickTime movies
as
well, but it would depend upon how large your
video
is... certain control schemes are available along
the
bottom of the video as it plays, but only if you
have
the horizontal room for it. Maybe there's a
problem
with your install?
Can you elaborate on how you do this please? When I
insert a quicktime movie, it plays automatically upon
opening that slide with no controls to pause, stop,
etc. I can have it start on click if I create a
build-in transition for it, but that's about it.
Maybe I'm missing something obvious?
Kyn is right. Check to see which version of Keynote you're running.

Error in GR Update control of movement type is incorrcet (entry 101 _ _ _ B

PO is created using Non-stock matreial and while doing good receipt of this PO user is getting error "Update control of movement type is incorrcet (entry 101 _ _ _ B). Message No. M7226.
Plesae help.....

Hi,
check following link
[M7226 Update control of movement type is incorrect (entry 101 _ _ _ B);
[http://www.sapfans.com/forums/viewtopic.php?f=3&t=297261]
Regards
Kailas Ugale

HT1343 Error on Page: "Control-E Move to the beginning of a line or paragraph" should be "Control-E Move to the end of a line or paragraph"

Error on Page: "Control-E Move to the beginning of a line or paragraph" should be "Control-E Move to the end of a line or paragraph"

Apple - Feedback

Update control of movement type incorrect (entry Z31 X X _ L )

Hi gurus,
Business reporting requirment to used M T 301, currently we using MT641 fr plant to plnt (stock in transit) transfer .
now we have to replace 641.
i)Kindly advice???
I have create Z31 copy of MT 301 but shown below error at PGI.
ii)Update control of movement type incorrect (entry Z31 X X _ L )
Error Message No E M7 226
how to remove this error?
thanks in advance.
sapsd25

Hi G. LakshmipathiLaxmipati guru,
thanks for the prompt response.
T code VAL01n & VL02n is alreday.
Is their any MT similar to 301 use for stock transfer with DO & Excise
Thanks
SAPSD25

UPDATE CONTROL/WM MOVEMENT TYPES

In OMJJ transaction in the UPDATE CONTROL/WM MOVEMENT TYPES i observed that for every single movement type there are many entries available .can anybody tell me how one can identify which is used and at what point?

101          B          A     GR for asset        - this will triger when you do the GR for asset against the PO
101          B          E     GR for sales order - this will triger when you do the GR for Sales order against the PO
101          B          P     GR for sales ord.st. - same as above but for project specifc
101          B          V     GR for acct. assgt.
101          F          A     GR for asset
101          F          V     GR for acct. assgt.
101     E     B               GR for sales ord.st.
101     E     B          E     GR for sales ord.st.
101     E     B          P     GR for sales ord.st.
101     E     B     X          GR STO for salesOrSt
101     E     B     X     E     GR STO for salesOrSt
101     E     B     X     P     GR STO for salesOrSt
101     E     F               GR for sales ord.st.
101     E     F          E     GR for sales ord.st.
101     E     F          P     GR for sales ord.st.
101     Q     B               GR for project stock
101     Q     B          P     GR for project stock
101     Q     B     X          GR STO Project stock
101     Q     B     X     P     GR STO for project
101     Q     F               GR for project stock
101     Q     F          P     GR for project stock
101          B          A     GR for asset
101          B          V     GR for acct. assgt.
101          B     X          GR stock in transit
101          B     X     A     GR st.in trans:asset
101          B     X     V     GR st.in tr:ac.assg.
101          F               GR for order
101          F          A     GR for asset
101          F          V     GR for acct. assgt.
101     E     B               GR for sales ord.st.
Like wise every movement has diff indicator and diff activity.
by looking the config you can see for all the activity

Update control of movement type is inco.

Hi All,
When user is Doing Good Receipts in Purchase orders & when it comes up he gets this message: (Update control of movement type is incorrect (entry 101 _ _ _ B)
Any help is appreciated.
Thanks & Regards,
S.Sinigh

Hi,
Please check the below thred .I think issue is with the OMS2
Update control of movement type is incorrect (entry 101 _ X _ B)
AMIT

How to control the movement of mouse cursor?

Hi,
I would like to ask
how to write a java program to control the movement of mouse cursor?
For example, when I press the "��" key on the keyboard, then the mouse cursor move upward.
Thanks you very much

Have a look at java.awt.Robot

Control Test Movie (settings)

novice here, flash cs3 on mac
when i Control > Test Movie with an animation, the preview is not cropped to the stage size
i see eveything out in the grey, which i don't want to see
i just can't find the right settings, if they exist
i'm assuming the stage is akin to the page bounding box in illustrator, so test movie should behave like 'print preview'?
thnx, sam
ps, god i miss the classroom, friends of ed books and lynda.com are great but still!

thnx,
i guess my prob is, my test swf just opens in a new Flash tab, same size as the Flash drawing board area
my banner is only 150 px tall, and i can't even minimize the flash window that short, plus it's a pain to have resize your flash window everytime you want to view a properly 'cropped' preview
can i set test movie to automatically open in a new correctly-sized window? i understand the swf will ultimately be viewed on a browser-sized html page, but doesn't the stage crop out everything in the grey when you publish it??

Controlling a Movie within a Movie

Similar Messages

Maybe you are looking for