Controlling and Ent Controlling Settings in R/3 before activation of DS

Hi GURUS,
I have been asked to activate the Controlling and Enterprise controlling DS in R/3. Please let me know what are all the settings I need to do before activating DS for Controlling Module.
Would definitely assign points and requesting you to explain it step by step. Thanks in advance.

Hi GKKR,
For Payroll Setting See SAP Note 697225 - Revisions to the DS 0HR_PY_1 for PlugIn 2004.1
Please look at thread
Data load problem in Payroll Cube - BW 3.5
Also look at SAP Notes - 672514,964569,397208,329961 for problems.
<u>For Time Management</u>
Set Up Customer Enhancement
You can use a SAP enhancement to access a Customer Exit. A customer exit will complete the info source fields with data you specify for the Personal Work Schedule Hours 0HR_PT_01 during the data transfer.
See the documentation available on the customer exit before carrying out this step. Choose the "Utilities" menu option to access the online manual.
Requirements
To use the customer exit successfully, you should have sufficient knowledge of the ABAP programming language. You can insert your own coding at specific points in the program that are reserved for this purpose, however, SAP does not offer service or support for the content of your coding. Any data that you make available to the application using the defined interface is stored consistently in the R/3 System. If data cannot be processed correctly in the system, the data is ignored.
Standard Settings
The customer exit is not activated in the standard R/3 System.
Activities
1. Create an enhancement project.
2. Assign the enhancement HRPTDW01 to this project.
3. Edit the customer exit EXIT_SAPLHRMS_BIW_PTDW_001.
4. Document your project (provide long text).
5. Activate the project. Your enhancement must be activated before it takes effect.
Further Notes
When maintaining the customer exit, insert your coding in the Include ZXPTDWU01. Enhancements, in contrast to modifications, are basically independent of release. Enhancements are not made in the standard R/3 System but in a name range specifically reserved for customers.
For more information on SAP enhancements, see the documentation on HRPTDW01 Time Data Extractor: Customer-Specific Fields.

Similar Messages

HELP... Unable to alter any parental control settings- I get an error message immediately and the lock goes back on.

Is there a fix to the parental control problem – in Mountain lion? I've been unable to change any control settings for months...should have kept the family PC...this IMAC is garbage at this point.

Although one would think that re-creating the index could fix this problem, that’s not the case. What sometimes works is restarting the computer or doing some cache-cleaning — don’t ask me why, and I don’t know how to fix the problem when that doesn’t work either.
You may also want to take a look at the following thread, where another user reported the problem in his/her case was related to a difference in how the email address was written:
Error - "... unable to find your response..."

In-App Purchasing disabled. Check your parental control settings and try again

I have played games for quite a while and have used the purchased many "lives" for games, etc. For about a week now, whenever I go to purchase some like this, I receive the following error message: "In-App purchasing disabled. Check your parental control settings and try again later."
I have read the threads about this and have done everything that was said to do. I go to settings > General > Restrictions. I ensured that "enable Restrictions" is turned off.
But I still receive the same error message. I have an ipad 2 with IOS 7.1.
ANy further ideas? Is there something in the iTunes store that needs to be checked?
I've about given up. Thanks for any help

I will try doing this, but I would like to add ... if I'm playing Candy Crush and want to buy additional lives, etc., I have no problem in purchasing them. Could it be the specific game that is not allowing me to buy anything? And I know this doesn't make much sense either, but I'm grasping at anything here because I've purchased them before.
You said to turn on in app purchases .. When I go into Settings > General, I'm ensuring that Restrictions are Disabled, correct? I can see the "in-App purchases" but I'm not able to do anything with it since my restrictions are disabled ... Is this correct? I'm a little confused here.

STO Process Copy control settings

Dear Gurus,
I am having issues with item number in purchase order and delivery document. I require the same item numbers in purchase order to be copied to delivery document. I think i got to do something with copy control settings. Please help me. I am confused since its an STO process.
Thanks in advance

Hi George,
Here customization can be done as follows:
Step 1: SPRO --> MM --> Purchasing --> PO --> Set up STO
In this step the customer number and sales area is assigned to Supplying & Delivering plants.
Step 2: SPRO --> Logistics Execution --> Shipping --> Delivery --> Copy control --> Specify Copy control for Deliveries
Check the settings made for DL to NL (STO) and DL to NLCC (Cross company) copy control settings.
Step 3: T.Code OVLK
The Delivery document types NL and NLCC needs to be assigned with "B" in the order required field. Thus, the system understands the data for delivery document has to be copied from Purchase order.
Thanks & Regards,
Sharan

"Table Name" in customizing SUS:"make field control settings for tables"?

Hi Gurus,
In the following customizing node, I can find the table name such as :
     ORDER.DET.EDIT
+     ORDER.DET.VIEW+
+     ORDER.HISTORY.DETAIL+
+     ORDER.ITEM.EDITH+
+     ORDER.ITEM.EDITL+
+     ORDER.ITEM.EDITL.WO.OR+
+     ORDER.ITEM.EDITM+
+     ORDER.ITEM.EDITM.WO.OR+
+     ORDER.ITEM.EDITS+
+     ORDER.ITEM.EDITS.WO.OR+
+     ORDER.ITEM.VIEWH+
+     ORDER.ITEM.VIEWL+
+     ORDER.ITEM.VIEWL.WO.OR+
+     ORDER.ITEM.VIEWM+
+     ORDER.ITEM.VIEWM.WO.OR+
+     ORDER.ITEM.VIEWS+
+     ORDER.ITEM.VIEWS.WO.OR+
+     ORDER.LIST+
+     ORDER.SDLN.EDIT+
+     ORDER.SDLN.VIEW+
It's difficult to know the difference for these so-called "table name"...
"SAP implementaion --> supplier relationship management --> supplier self-service --> settings for user interface --> make field control settings for tables"+
What's actual meaning for these table names? Where can I find related document and actual corresponding transparent tables for these so-called talbes?
Thanks and best regards
Jack

Hi Neelima,
Thanks a lot.
Checked the SAP note, but I could not find corresponding infomation about that, kindly please advise again.
Best regards
jack

Copy control settings for Multilevel variant configuration

Dear All,
I have the following scenario for variant configuration A quotation is created for configurable material with multilevel configurable material
with reference to this quoatation a sales order is created.
My requirement is that the quoatation must get copied to sales order as it is along with the values for subitems also.
In copy control settings there is a field at item level called
configuration :
In this if I maintain value
A: The variant is getting copied but the values for subitems is not getting copied the values for main material is in changable mode.
B: The variant is getting copied but the values for subitems is not getting copied the values for main material are not in changable mode.
C:The variant is getting copied   the values for subitems is getting copied the values for main material are in changable mode but the values for subitems are not in changable mode.
My requiremnt is that
The variant must get copied
the values for subitems must get copied
the main material vlaues must be in changable mode
the subitems vlaues must be in changable mode
How can I fullfill this requiremnt, has any one of you come across this scenario, Pleae provide with solution it is urgent
Informative answers will be provided maximum points.
Deepak

Hai Deepak Mehmi,
please check in T CODE VTAA
In the position check
SalesDocType : Sales order type
SalesDocType : Inquiry type
Double clcik and check
DataT 051 General header data       Copying requirements 002 Header-diff.customer
DataT 101 Header business data
DataT 001 Partner header
And Tick mark for Copy Item Number
For further check:
In Item
                                  Copying requirements 301
DataT 151 General item data                                          Pos./neg. quantity   +
                                                           Copy quantity
DataT 102 Bus.data/item compl.                                     Pricing type         G
DataT 002 Partner item                       2 Update document flow   Cont. item copy mode
                                                    Copy product select.
FPLA 251 Conditions                Configuration
                                                           Campaign Deter.
Regards,
Mani

Copy control Settings from a Quotaion to Value contract/Quantity Contract

Hello Friends,
I would like to know whether it is possible to create a Value/Quantity contract in R3 with reference to a Quotation,Currently I am not able to see the copy control settings between quotation and Value/Quantity ,Also it help me a lot if you can provide me the copy control settings -Header and Item level
Thanks and Regards
Mohammed Roshan

if you run VTAA you would try to create a copy control as follows:
source: QT (quotation)
target: CQ (quantity contract)
say, take the existing record QT->AA (just an example) highlight it and hit 'Copy As'. Type 'CQ' in Target SalesDocTyp field.
hit Enter. Hit 'copy all'. (if you get a message regarding the "-" or "+" quantityt set this field blank (empty)
save it and test.
good luck!

VTFL copy control settings not visible

hi
i am facing some problem in copy control settings - vtfl - delivery to billing type copy control
when i am doing the required settings i.e copying ZLLZ delivery to ZFD billing type and saving the settings, a transport request is being generated and also it says tht data has been saved,but when i see the list i cannot see the new copy control tht i did.
i can see these entries in the table TVCPF. but these entries shows billing type ZFD n delivery type ZLLZ
along with additional entry in sales doc column as "ED"
i am not able to understand from where this entry is being picked...
an why i cant see the entries at VTFL
can anyone help.

Hi friend,
Please try to check you documents in transaction code VTFL by giving the Billing document (first) and the delivery document.
Definitely you can find the combination
And for your another question , In the table TVCPF you can see the sales document type ED which would have maintained in the VTAF copy controls from the Sales document to Billing documents
Please let me know if you have further queries.
santosh

Copy control settings needed for order related billing

hi,
sap gurus,
please provide the copy control settings related order related billilng and order related proforma invoice.
thanks in advance
regards,
balaji.t

Dear,
1 )Use TCODE -- VTFA and maintain between OR ( source doc)TO F2 (Target Doc.) for ORDER RELATED BILLING
If u want Z Document type then copy OR and make ur OWN SALES DOC like ZMFG and also copy F2 and create like ZFGR
and maintain as suggested above.
At Header Level -- COPYING REQUIREMENT (001)
At ITEM Level-- COPYING REQUIREMENT (001)
                          DATA VBRK/VBRP (003) SINGLE INVOICE OR (001) SPLIT INVOICE
                         Billing quantity (A) / Pos./neg. quantity (+)/ Pricing type (C)
2) Use TCODE -- VTFA and maintain between OR ( source doc)TO F5(Target Doc.) for ORDER RELATED PROFARMA BILLING in similar way u can maintain for ur Z Documents
At Header Level -- COPYING REQUIREMENT (007)
At ITEM Level-- COPYING REQUIREMENT (008)
                          DATA VBRK/VBRP (003) SINGLE INVOICE OR (001) SPLIT INVOICE
                         Billing quantity (A) / Pos./neg. quantity (+)/ Pricing type (C)
need further help revert back.
Regards
AJIT K SINGH
HAPPY TO HELP U

Remote Control settings for Markers

The user manual for Studio Pro 4 states that Remote Control settings for Markers will override all other settings while that part of the track or story plays.
This however, is not the case- In my project the track & story settings for Remote Control>Menu are actually overriding marker Remote Control>Menu settings, & I really need the marker functions to take precedence over other functions.
Any idea how I can make this happen?
Thanks!!
eric

As Jake said - I am not seeing this behaviour either.
If you clear all end jumps from chapter markers and place the markers into stories then you set the menu call for the story. This can be different to the track and depending on which you are playing the menu call for that item will take precedence.
Of course, if you really want to make it bullet proof then you could point the menu call to a script. Assuming that no matter which story you are in, or how you got to the marker in the track, the following script will always return you to a specific button on a menu for the marker that you have just played
mov GPRM0, SPRM7
Jump Menuname, [GPRM0]
SPRM7 is a system parameter that checks which marker has just played. The first line of the script loads the value of this into a memory slot called GPRM0. The second line operates a jump to your menu - I assume there is only one menu here - and using a conditional GPRM based button jump, the value of GPRM0 fills in the value of the button to go to. This saves writing out lines of code for each possible button.
If you have lots of menus then this script can be adapted very easily to cope with that, or you can set up other scripts to identify which menu you have come from so as you know which to go back to.
However, before any of this I would want to know why you are not getting the expected behaviour on our project - my guess is that there is going to be a menu call set into a chapter marker which is over-riding the track or story menu call. If you have end jumps on markers, or menu calls on markers, remove them.

Loosing D300 Picture Control settings when importing RAW files into CS3!!

Hi there...I would really appreciate some help!!
I have recently bought a D300/Tamron 17-50mm f2.8 which I love, however, I'm getting increasingly frustrated by either my lack of knowledge or some form of compatibility issue between the D300 and CS3!!
When importing I am loosing all the RAW Picture Control settings!! - e.g. If I shoot using Picture Control "Monochrome" CS3 rips out all of the settings and returns the RAW image back to the default camera settings!! It doesn't seem to be the D300 as Picture Control settings are retained when viewing the RAW images on the camera's screen.
Camera: D300/firmware - default install
Computer: MacBook Pro Intel 2.4Ghz/2Gb RAM | Operating System: OS X 10.5.4 (9E17) | Software: Abobe CS3 with CameraRAW 4.4.1 plugin (also tried beta 4.5 but to no avail!!)
Thanks in advance!!

I am trying to open a NEF file (RAW format) from my card with PhotoShop CS3 and it does not work. These photos were taken with a Nikon D300. A window appears and the message read as follows:
"Could not complete your request because it is not the right kind of document"
Could someone help me?
I have searched the online material and I have not found a solution as of yet.
I have no issues opening JPEGs taken with a D300 and I can open NEF files that were taken with a Nikon D200...
I appreciate your help.

Reg: UTA ports FCoE, 10GbE flow control settings

Could someone shed some light on the flow control settings for UTA ports, below is the scenario.I am working on the configutation of 4 node 3220 custer. We are using this 4 node cluster for FC and NFS traffic. each UTA port on the node used to serve both FcoE and NFS traffic( UTA port logically acting as FC and 10GbE ports) . However, the flow control is set to FULL on the 10GbE logical port to serve the NFS traffic. I think this flow control settings at 10GbE logical port level doesn't effect the FC traffic flow of the UTA port. the flow control settings would be effective on 10GE logical ports only.. Please confirm this... NetApp recommend to set the flow control to NONE and upper layer protocalls can take care of flow control( as per Best practise). If I want to change the flow control setting of 10GbE logical port, does it effect the data flow of logical FC0E port aswell?Now the actual issues is we are using the controllers mostly to serve FC trafic and we are experienceing Performance issues on all the nodes. current ONTAP version on the controller is 8.2p5we are hitting the latency of 50-80ms, I am trying to track the IO on the controllers, IO is not really high when we had the performace issues, But some times disk utilizations and cpu utlization hitting 80%. Performace manager doesn't have the granularity at aggregate level to track what LUN/volumes are casuing the high utlization at aggregate level..I am using the coomands sysstat -M, sysstat -x, netstat , statit commands mainly. However, I am not sure on any other internal porcesses are causing the high disk uitlizations...Please share your ideas on this..Oh.. another point this.. These controllers are flexpod config.....

Hi,We haven't worked on flow control settings.. you mean you are able to Disable the flow control on CNA cards?We have upgraded these filers to 8.2.3P3. at the moment filers are working fine, no performance issues.. However I wanted to disable the flow control on these ports, if possble. But NetApp docs tell that we cann't disable the flow control on the CNA cards. https://library.netapp.com/ecmdocs/ECMP1368834/html/GUID-31241255-4914-46FF-BDB5-A02DCCEABCCA.html Regards,Chandra

Will Aperture ever support Nikon or Canon Picture Control settings?

As with many people, I've also run into two issues:
1) The RAW Picture Control settings used by Nikon don't seem to be supported by Aperture. I've downloaded the latest Camera Raw update (2.4) and yet it still seems that none of the settings get interpreted by Aperture. As a long-standing Aperture user, this is a major issue since it now requires me to import into either ViewNX or Capture NX2 and then transfer them to Aperture. Since I use Photoshop for dodging and burning, I'm beginning to wonder if I should just move to Lightroom.
2) The highlights seem to get blown out fairly easily when viewed in Aperture. I often seem to have to pull back the highlights on many pictures.
I was wondering if these are still persistent issues that others see as I'd like to consider what reasonable options I have.

Jade, you gave up to easily!!!
I would guess that Nikon makes most of their money from cameras, lenses, nik software and very little from NX software. While NX is fine for small projects, it is way to slow and plodding to be a meaningful workflow product.
But, if Nikon teamed up with Apple so that Aperture could incorporate most of what is in NX under a licensing/royalty agreement, Nikon would sell lots more of their core products, Apple/Nikon software would be come the default workflow processing solution and would set industry standards for digital imaging for the pro. Canon would be forced to follow suit or fall very far behind. Nikon has done a wonderful job in bringing their bodies to leading the pack, they need more work on lens, IMHO, and a meaningful relationship or co development with Apple would seal the third arm of the puzzle.
Consumers, Apple, and Nikon all benefit from such a model. Just have to get to terms that are acceptable and, as typical in these situations, there are too many big egos involved and unwilling to see the forest through the trees.
Food for thought.....maybe....

How can I restore Parental Control Settings from Time Machine Backup?

I was trying to adjust one of the parental controlled accounts for my child. I disabled parental controls, rebooted, and re-enabled it. Now all the settings that I had setup before are gone. How can I restore Parental Control Settings from Time Machine Backup?

Hi ...
I've found a solution to my problem.
Time Machine locates extenal HDD backups differently depending if they were done via a network or via a USB/FireWire/Thunderbolt connection.
My initial backup was done via a direct Thunderbolt connection. I ran into the above issue b/c the second time when I tried looking for the backup file the HDD was conencted to my iMac and I was accessing it via a network conenction.
I simply connected the drive directly to my MacBook pro and ... voila. I was able to see the backup, select the iPhoto library and begin the restore.
Hope this helps.
BTW - I found this out by reading the 'blue box' selection on this page: http://pondini.org/TM/E2.html
(Thanks goes to Pondini!)

Version Control settings

I'm a student using Dreamweaver CS5. I'm trying to upload files to a remote site. In the Remote Server pane I can't see the files under Remote Server. Just a message "To see the files in your repository, you must define its Version Control settings." How do you do that? I've typed it into all the help fields and can't get an answer. Thanks.

It could be that you haven't defined the site correctly. First I suggest go to:
Site >> Manage Site
At the next window, select the site you have defined from the list. If the list is blank then you need to define the site by clicking on the New button
However, if the list is bot blank then just the site that is giving you the problem and then go to Version Control
at the version Control dial;og box make sure the Access box is "None" and everything else is greyed out.
Now save it and this should solve the the problem you are having.
Good luck.

Controlling and Ent Controlling Settings in R/3 before activation of DS

Similar Messages

Maybe you are looking for