Controlling Area in CO reports (GRR1)

Hello
We have customized a new Controlling Area, but unfortunately the existing (self-defined) CO reports doesn't work - even though they work in the 'old' Controlling Area.
We have changed the Controlling Area in 'Generel data selection'. Do we have to change it anywhere else? Is the library or report groups assigned to a specific Controlling Area?
Best regards
Søren Kirch

HI,
please check your reports again , maybe CO-Area selection variable is not used in general data selection but (in other reports) in column definition. Use SAP standard selection variables in report painter. If the sel-variables are own defined, check the variable definition.
Best regards, Christian

Similar Messages

Plan Cost in Controlling Area

Hi,
1. Please let me know the Plan Cost comes from which table in Controlling.
2. Whre can i get the controlling area wise costing report
3. Client want to convert this plan cost value from us dollar to inr currency, how can we do this.
Please send solution for above three Urgent
Rgds
sunfico

1) tables coss and cosp (field WRTTP = 1)
2) tcodes: ksbl, ksbp, s_alr_87013614
(for further: look infosystem)
A.

REPORT S_ALR_87013558 - budget in Controlling area currency not correct

Hi ,
these are the budget column settings :
Key figure          Overall in CAC
Version     0     Plan/Act - Version
Value Type     41     Budget
Object ind.     P     Project item
Debit type     1     Costs and credit-side payments
My case is the following :
Controlling Area Currency : USD
WBS object currency : EUR .
The budget on the wbs is in EUR ; unfortunately the bdg displayed into the report , has a Change rate that i dont' recognize .
E.G. Budget on the wbs 110000 EUR - bdg displayed into report : 120.153,85
If i launch the transaction cj31 i see the bdg , if i select controlling area currency , the bdg in USD >156.200,00.
This value is read from the table BPGE .
Why does the report S_ALR_87013558 don't read it also from there?
thanks and regards

hi
in PS all the Cost reports are read from the Info Database.

CJI3 Report - Balance in Controlling Area currency after settlement

Hi Friends,
When I run CJI3 report for one of my projects, the system displays the actual costs in Controlling Area Currency and Object Currency. Controlling Area currency is USD and Object Currency is EUR. After settlement, for one of the cost elements, the CJI3 report shows 0 EUR actual costs balance under Object Currency and displays 19.5 USD actual costs balance under Controlling Area currency. This seems to be coming from PM05 order and the the posting dates are different.
Why there is balance shown in Controlling Area currency (USD) (may be due to exchange rate difference according to me..)?
How this issue can be resolved so that I can go ahead to close the project?
One more thing related to the same issue, when I run CN41 (Structure Overview0 report), it shows a difference actual costs balance (3201USD)? Why is it different from CJI3 report? Which report is correct?
Thanks & Regards,
Balakrishnan

you need to check two things -
are you settling the PM05 order to WBS before settling the WBS itself
or
there seems to be another account to make provision for exchange rate fluctuation - check that out

NEW GL profit center report in Controlling area currency

Hi all,
Could anybody suggest me,
how do we have the New GL profit center report in controlling area currency.
or else if any possibility for report painter report please suggest.
Thanks
kishore

Hi Kishore
New GL PCA values are stored in FAGLFLEX* tables.
These are FI tabls and they store values in 1st 2nd and 3rd currency of FI. If your control area current is same as anyof these, you can access report in that currency
Else, you can do the conversion inside your report using a static exchange rate
Br. Ajay M

Hide Controlling Area from Cost center in report

Hi Experts,
I have Costcenter as reporting field in BW report. Controlling Area is compunding char for Cost center.
In the report, it shows both values (cost center and controlling area) when i use cost center in query. foreg. KO01/C123456 as key.
(KO01 is controlling area and C123456 is Cost center)
Is there any way to ONLY display Costcenter value in report??
Thanks in advance.
-Abhijit

You can add controlling area IO in the line and hide it (in properties set never display) or you can also insert it in filter with fix value KO01.
Hope it helps.
Regards

CJE0 Report in currency other than controlling area.

Dear PS friends,
As all PS Reports in CJE0 are in controlling area currency, if we want to have these reports in other currency then how we will go.If any one has gone through such problem , pl let us know the way.
Regards,
AS

I haven't tried it but below should be the process to report in diferrent currencies
Check if you have the All Currencies Indicator in the Controlling Area.
Also check the customising node CJEC (Currency Translation) and OB08 (Maintain Currency Exchange Rates)
In the reports choose from the menu Settings -> Currency to report in diferrent currencies.
Regards
Sreenivas

Report Writer many Controlling areas

Im from mexico, i will try to write in english my problem.......
here the users use a report or inform, the users run this inform in the KSBB transaction, and then they choose 'Plan/actual comparisons' then they select 'Cost Centers: Actual/ Plan/ Variance and they run this report, but in the parameters display, they only can put one Controlling Area, and they need run this report or inform to many Controlling areas, i need to change this report to make this posible.
I copied the report into a Z, but i don´t know how i change this parameter to make a select-option or a Range of values.
Help!.
Para los que saben español:
Aqui los usuarios usan un reporte o informe, que corren en la transaccion KSBB, y luego escogen la opcion de 'Comparaciones Plan/ Real' luego escogen el reporte 'Centros coste: Real/plan/desviacion' y corren el reporte, pero solo pueden seleccionar una sociedad de CO, y lo que desean es que se pueda correr el reporte para muchas sociedades, ya copie el reporte a un Z pero no se como hacer para cabiarle el parametro por un Select options o colocar un Rango para sociedades.
Ayuda!

Thanks Much Janardhan for your response. The only thing which is different is: It is: KKSM.
Thanks again.

Scom 2012 r2 - report viewer controls are not installed

Hi
I'm stop on this error when installing the operation console and web console
report viewer controls are not installed
OS : Windows 2008 R2
SCOM Version : SCOM 2012 R2
I installed the install Report Viewer Redistribution 2008 SP1 and install
Report Viewer Redistribution 2010 ans I'm still getting that error
Please advise ...
Robert

Hi
The requirements are listed here http://technet.microsoft.com/en-us/library/dn249696.aspx#BKMK_RBF_OperationsConsole
Install Microsoft
Report Viewer 2012 Redistributable Package then it should work.
Cheers,
Stefan
Blog: http://blog.scomfaq.ch

How to controll column width in report ?

Dear All,
i have created Classic Report but here Column width is too large.
i want to controll column width in report .
How can i do this..
Thanks

Hi Vedant,
There are two possibilities in your case.
1.width of your column heading is too large.
include break in your column heading
for ex .. column heading is employee department number then write it as *[Employee(br)Department(br)Number]* // replace ( with < and ) with > in br
2) Value is too large
Go to Report Attributes->edit your column->column formatting->css style
In CSS style put this display:block;width:100px;white-space:wrap
Hope this will helps you,
Thanks,
Jitendra

USING MULTIPLE CONTROLLING AREA in the column

Dear Experts,
As per my requirement i need fetch the data from multiple controlling areas in to one report. please let us know how many ways are there? can i able to use controlling are in the column of the report. when i try to select the controlling area is not appearing in the coumn and it is appearing only in the gene

Hi,
You can select multiple Controlling area Please try with following steps.
Maintain variant
Click on attributes.
Environment > Maint.sel.varables.
Click on Display/Change.
Create new Parameter.
Maintain selection options to new parameter.
Save and back.
Select "T" in selection variable against Field name :Controlling Area.
Select the selection variable(Newly created Parameter)
Regards
Mahesh

SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

SSRS reports are always best viewed in IE and the report result what you see in IE always will not be same and consistent in thirdy party browswers.
So consider using IE as workaround.
Also please refer:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/2188de10-cff9-4e24-b14f-da5121f1c4a4/ssrs-calender-control-not-visible-in-chorme-on-server?forum=sqlreportingservices
Workaround here:
http://www.rajbandi.net/Fixing-SSRS-Report-Viewer-control-date-picker-in-Google-chrome/
-Vaibhav Chaudhari

MSS BW error: My Controlling Area (SAP Exit, CO Pers.) (*)

Hello,
We're starting to set up MSS My Budget. When I try to run a BW cost center report from within My Budget, I get an error indicating that the application can't determine a value for "My Controlling Area". Please advise how I can fix this. Authorization? User Exit?
Thanks in advance.
Regards,
Dennis

Hello,
This problem has occurred AGAIN! I am at a loss of how to resolve.
E.g.
Hours posted = 168 (@ 50 Eur/hr)
Eur = 8,517.60
GBP = 75,396.72
The object currency is Eur however the controlling area currency is GBP. When converting back to GBP it is completely incorrect. Any help would be much appreciated!
Many thanks,
NVSpace

Multiple Controlling Areas

I have a client with multiple controlling areas in ECC 4.6c. We are preparing them to upgrade to ECC 6.0 then migrate to the new G/L. The questions is: When is it "easier" to convert to a single controlling area, before or after the ECC 6.0 Upgrade? Before or as part of the New G/L Migration?
They may not upgrade until very late this year or early next year. They want to improve consolidated reporting as quickly as possible but are wary of the amount of time needed to eliminate the multiple controlling areas.

Have you thought about re-implementing???
Migrating Company Codes from different controlling areas can be a complicated process. You may need to create new Company Codes and link them all to the new controlling area.
This will be a massive job - even if you dont want history.
Think of the master data - Customers, Vendors, Assets, Materials etc.
If you are to do anything you should get your rg Structure defined - i.e. one Controlling Area and then go for the new gl document splitting program.
The two pieces of work are Fiscal Year dependant, the next FY you would need to move to a single Controlling Area, and then the following move to document splitting.
You could do the Controlling Area and Upgrade (re-implementation) in one project and then do the document splitting the next Fiscal Year.
Either way - good luck, sounds like you are going to be very busy !!!

Deactivate Cost center accounting in controlling area

Hi all,
Could you describe the consequences of the deactivation of CO-CCA in the controlling area?: should I expect incoherencies ?
The activation (deactivation) code setting is free in OKKP transaction. My first deactivation test show me it's possible to make new postings in FI (FB60) and the cost center is not necessary anymore.
In fact in my case I don't need to check FI-CO reconciliation.
Regards
Pascal Cuenin

Hello
Why this type of requirement is coming into our mind. SAP controlling has very good funtionalities for internal reporting. If you deactivate cost center accounting then how your management would see...cost center reporting, budgeting, controlling
for example you have cost element salary,,,,,with one gl for a company,,,how you will distinguish salary with reference to a division , dept, location....
how you will get your assessment, settlement, costing all these for which CO functionalities are developed
regards
dinabandhu

Controlling Area in CO reports (GRR1)

Similar Messages

Maybe you are looking for