Controlling area not in CSKU table
Hi Experts,
Can you explain why controlling area is not in CSKU table?
Thanks,
Bill
Dear Bill,
Goto SE37 > Your FM name ROMT2_RS_GET_TEXTS > Display > Source Code tab > Observe the source code to know from where it is fetching the data.
Regards,
Ramkumar.
Similar Messages
-
Credit Control area not filled in table KNVV
Hi everyone,
I am new to the forum and first and foremost want to thank the particpants here for their contributions, which have helped me a lot in the past.
I am facing a problem today and hope some of you could assist me with some hints on how to solve it. In the existing forum entries I could not find a solution.
I am working in a Rapid Deyployment Solution IS Retail ERP and am trying to have table field knvv-kkber filled (credit control area). Right now it remains empty, although customizing exists in a way that credit control area exists, it is assigned to company code and sales area. Customer also has a record in table knkk for the respective credit control area. Obviously field credit control area in tcode xd02 is not available and would also not be available for editing, even when screen tab customizing were changed. It is only shown in xd03. Also former key users working with a different IS Retail installation told me that they never keyed in credit control area in customer master tcodes xd*. So I am wondering right now, how system fills that field.
Thank you a lot for your help.
Regards
Christian"""Just adding in Lakshmipathi's comment that if we maintain credit control area in KNVV-KKBER field and we have also assigned it in IMG with sales area system will give preference to KNVV-KKBER. If you have not assigned it customer master then system will determine it from customization.""""
Dear Moazzam, sorry--I need to differ with these statements.
Always System will gives the priority to sales area then only to customer.(in determining credit control area)
let me explain: If we take Credit control area determinations will follow the below procedure:
1.Through the exit(EXIT_SAPLMV45K_001)
2.Sales area(distribution channel)
3.Customer master
4.Company code
Note: For the first 3 situations,mandatorily- you need to assign your credit control area to your company code.(Deriving the Credit Control Area - Credit and Risk Management (SD-BF-CM) - SAP Library)
Dear Christain:
As you are aware, we can maintain credit control areas can differ for each sales area.
For example,same customer has been maintained with two different sales areas.
Customer X in sales Area 1000/10/00-can have credit control area A
Same customer in sales area 1000/20/00-can have credit control area B.
If business wants to maintain at customer master level--they can maintain( it is optional)
Otherwise simply they can assign for the sales area which will be defaulted into transaction level.
This is what is happening in your case.
Note: if you maintain assignments for your sales area--then this will be defaulted into KNVV-KKBER,even though you doesn't maintain manually in XD**/VD** Tcodes.
Hope this helps.
Phanikumar -
Head phone volume controls are not working after updating to ios 6.1 y?
head phone volume controls are not working after updating to ios 6.1 y?
I have tried my head phone with other iphone still the same problem may be my head phones has been not working need to chek my iphone with other head phones which are working
-
Parental Controls are not working correctly. There are websites I've listed under Allow Access, however they are still blocked. - such as: Yahoo mail and USAA banking. How can I fix this?
Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly -
Scom 2012 r2 - report viewer controls are not installed
Hi
I'm stop on this error when installing the operation console and web console
report viewer controls are not installed
OS : Windows 2008 R2
SCOM Version : SCOM 2012 R2
I installed the install Report Viewer Redistribution 2008 SP1 and install
Report Viewer Redistribution 2010 ans I'm still getting that error
Please advise ...
RobertHi
The requirements are listed here http://technet.microsoft.com/en-us/library/dn249696.aspx#BKMK_RBF_OperationsConsole
Install Microsoft
Report Viewer 2012 Redistributable Package then it should work.
Cheers,
Stefan
Blog: http://blog.scomfaq.ch -
FLVPlayback controls are not showing in other people computer on there browser...
Hi,
In my project I have to play a flv vedio in swf file so in place a FLVPlayback component in one movieclip and when I hv to show I make that movie clip visible and play the vedio from starting.
Its working fine on my computer but FLVPlayback controls (play pause button, seek bar volume controls) are not showing in other people computer on there browser...Then set "base" attribute to "swf" or "./swf" (relative path - can't remember which ), or absolute path to the "swf" directory.
Kenneth Kawamoto
http://www.materiaprima.co.uk/ -
While deleting project from CJ20N entries are not deleted from table PRPS
Hi,
I am deleting project from CJ20N then from PROJ table entries are getting deleted but WBS element entries are not deleted from table PRPS.
Any deletion Flag should also be checked?
Thanks in advance!
Regards,
JyotiHello,
Thanks for reply !
My problem is I am deleting project and WBS Elements from CJ20N but WBS element entries are not deleted from PRPS table.
Why they are appearing in PRPS table and how it can be deleted?
Thanks ! -
Asset Line items are not updating in table ANEP
Hi friends,
I found that asset line items are not getting updated in ANEP table,.
This is my precedure for posting of depreciation.
I'll create Asset through AS01, then i'll use the T.Code: F-90.. then i'll run the depreciation program thru t.Code: AFAB.
In but i am unable to capture the values of Planned and Depreciated or Posted values in ANEP.. Is there is any other table for this...
Where is the mistake in my process..
thanks in advance..
NaveenHI Naveen
The FI-AA documents are stored in tables ANEK (document header), ANEP (document line items) and ANEA (proportional values). You can use FI-AA standard report RABEWG_ALV01 to list all transactions to an asset in one fiscal year, and report RAABGA_ALV01 to list only retirement postings.
ANEA should be the solution you are looking for.
Hope it helps!
Cheers
Z -
RFC model values are not shown in table
Hi there,
I can't gather the values from the RFC FM in my table, while this has been done exactly the same way as other tables which do get values... Any reason for this?
I have 2 DC's:
-data DC which acts as a container for the RFC-imported datamodels
-bupa DC in which the implementation is done
Custom Controller CuCoMain (from bupa DC):
Context:
OutputRelContacts (model node bound to model BuPaRelationsModel.__Crm_Bb_Bupa_Rels_Output)
cardinality: 0...n; selection: 0...1
> Rel_Contacts_Result (node of OutputRelContacts)
=> bound to BuPaRelationsModel.__Crm_Bb_Bp_Rel_Res_Ds
cardinality: 0..n; selection: 0...1
There is no context input necessary since 'related contacts' is dependent of the bpnr which I pass as parameter (see below).
Implementation in CuCoMain
public void TriggerAccConSearch( java.lang.String Mode, java.lang.String BuPaNr )
//@@begin TriggerAccConSearch()
//also see comments in TriggerBuPaSearch
accContactsInput = new __Cernum__Crm_Bb_Bupa_Rels_Input();
accContactsInput.setRel_Mode(Mode);
accContactsInput.setBp_Number(BuPaNr);
try{
accContactsInput.execute();
wdContext.nodeOutputRelContacts().invalidate();
accContactsOutput = accContactsInput.getOutput();
this.wdThis.wdGetContext().nodeOutputRelContacts().bind(accContactsOutput);
catch(Exception e){
msgMngr.reportException(e.getMessage(),true);
//@@end
Context in view
Context node OutputAccContacts (bound to CuCoMain.OutputRelContacts.Rel_Contacts_Result)
cardinality: 0...n; selection: 0...1
Implementation to trigger TriggerAccConSearch:
String SelectedBuPaNr = this.wdThis.wdGetContext().nodeVOutputDetails().currentVOutputDetailsElement().getBpnumber();
String RelMode = "C";
this.wdThis.wdGetCuCoMainController().TriggerAccConSearch(RelMode, SelectedBuPaNr);
RelMode & SelectedBuPaNr are filled with values.
So what did I do wrong...? I'm out of inspiration; I've reimported the model, rebuilt the entire application, redone the context, redone the implementation but up until now nothing worked.
Any help is greatly appreciated
KR
AHi there,
Yes, as stated earlier, my RFC is being called by the application and the parameters are correct (input & output). Somehow, these values just don't get transferred to the node.
Also, you can try the following piece of code before the RFC call at the Dynpro end :
IWDMessageManager manager = wdComponentAPI.getMessageManager();
try{
wdContext.current<RFC_Name>_InputElement().modelObject().execute();
wdContext.node<Output_Node_Name>().invalidate();
} catch(WDDynamicRFCExecuteException ce) {
manager.reportException(ce.getMessage(), false);
I don't think that will help in my situation. In my situation there are 3 tables which have to be filled by the nodes.
These 3 tables are all based on the same RFC (with different input parameters). The weird thing is that one of these tables works perfectly and the others just don't work. Even weirder is that all the RFC-uses are implemented the same. (See below)
The working RFC call (table is populated):
public void TriggerAccRelSearch( java.lang.String BuPaNr, java.lang.String Mode )
//@@begin TriggerAccRelSearch()
//also see comments in TriggerBuPaSearch
accRelsInput = new __Crm_Bb_Bupa_Rels_Input();
accRelsInput.setRel_Mode(Mode);
accRelsInput.setBp_Number(BuPaNr);
try{
wdContext.nodeOutputRelationships().invalidate();
accRelsInput.execute();
accRelsOutput = accRelsInput.getOutput();
//wdComponentAPI.getMessageManager().reportWarning("TriggerAccRelSearch Result of RFC START" + accRelsOutput.getRel_Result().listIterator()..toString() + "TriggerAccRelSearch Result of RFC START");
//wdComponentAPI.getMessageManager().reportWarning("First line: " + accRelsOutput.getRel_Result().get(0).toString());
//currentRel_ResultElement().getRelationship().toString());
this.wdThis.wdGetContext().nodeOutputRelationships().bind(accRelsOutput);
wdComponentAPI.getMessageManager().reportSuccess("test accrelsearch: " + wdContext.nodeOutputRelationships().nodeRel_Result().currentRel_ResultElement().getAttributeAsText("Relationship").toString());
catch(Exception e){
msgMngr.reportException(e.getMessage(),true);
finally{
DynamicRFCModel modelinst;
modelinst = (DynamicRFCModel) WDModelFactory.getModelInstance(BuPaRelationsModel.class);
modelinst.disconnectIfAlive();
//@@end
The non-working RFC-calls (tables are NOT populated):
public void TriggerAccReltdEmpSearch( java.lang.String Mode, java.lang.String BuPaNr )
//@@begin TriggerAccReltdEmpSearch()
accReltdEmplInput = new __Crm_Bb_Bupa_Rels_Input();
//accReltdEmplOutput = new __Crm_Bb_Bupa_Rels_Output();
accReltdEmplInput.setRel_Mode(Mode);
accReltdEmplInput.setBp_Number(BuPaNr);
try{
wdContext.nodeOutputReltdEmp().invalidate();
accReltdEmplInput.execute();
accReltdEmplOutput = accReltdEmplInput.getOutput();
this.wdThis.wdGetContext().nodeOutputReltdEmp().bind(accReltdEmplOutput);
//wdComponentAPI.getMessageManager().reportSuccess("test accReltEmp: " + wdContext.nodeOutputReltdEmp().nodeReltd_Emp_Result().currentReltd_Emp_ResultElement().getAttributeAsText("Relationship").toString());
catch(Exception e){
msgMngr.reportException(e.getMessage(), true);
msgMngr.reportSuccess("error: " + e.getCause());
finally{
DynamicRFCModel modelinst;
modelinst = (DynamicRFCModel) WDModelFactory.getModelInstance(BuPaRelationsModel.class);
modelinst.disconnectIfAlive();
//@@end
and:
public void TriggerAccConSearch( java.lang.String Mode, java.lang.String BuPaNr )
//@@begin TriggerAccConSearch()
//also see comments in TriggerBuPaSearch
accContactsInput = new __Crm_Bb_Bupa_Rels_Input();
accContactsInput.setRel_Mode(Mode);
accContactsInput.setBp_Number(BuPaNr);
try{
wdContext.nodeOutputRelContacts().invalidate();
accContactsInput.execute();
accContactsOutput = accContactsInput.getOutput();
wdComponentAPI.getMessageManager().reportWarning("TriggerAccConSearch Result of RFC START" + accContactsOutput.getRel_Result().toString() + "TriggerAccConSearch Result of RFC START");
this.wdThis.wdGetContext().nodeOutputRelContacts().bind(accContactsOutput);
catch(Exception e){
msgMngr.reportException(e.getMessage(),true);
finally{
DynamicRFCModel modelinst;
modelinst = (DynamicRFCModel) WDModelFactory.getModelInstance(BuPaRelationsModel.class);
modelinst.disconnectIfAlive();
//@@end
Parameter definition:
__Crm_Bb_Bupa_Rels_Input accRelsInput;
__Crm_Bb_Bupa_Rels_Output accRelsOutput;
__Crm_Bb_Bupa_Rels_Input accReltdEmplInput;
__Crm_Bb_Bupa_Rels_Output accReltdEmplOutput;
__Crm_Bb_Bupa_Rels_Input accContactsInput;
__Crm_Bb_Bupa_Rels_Output accContactsOutput;
The table dataSources have all been bound to the context properly, as well as the table columns. Also, in the backend the correct values have been passed and retrieved. -
Sales Order Credit Account and Credit control area not updated
Hi,
I have a production issue. I have two sales orders created from Same Value contract, with same PO, same sold to party same payer. Both the orders created by same user at the same time.
First SO has credit control area and credit account is updated but the second order did not update with this information.
For first order, if I go to Environment -> Partner -> Display credit account, system taking to FD33 screen of the credit account.
For the second order, above menu path giving message "Cannot display credit limit as no credit management account is available"
Please let me know how fix the second order to rectify this issue.
Thanks,
SatishHi,
Goto OVAK T.Code.
Assign credit check to your second sales order type.
Assign the values from "A" to "D".Any value as per your need.
Save.
Regards,
Krishna. -
Messages are NOT deleted from tables XI_AF_MSG and XI_AF_MSG_AUDIT
Hello,
I set the retention period to 7 days (1 week)
I also set the default ARCHIVE and DELETE jobs and ALL are working fine.
However, messages with OLD dates are NOT deleted from the tables XI_AF_MSG and XI_AF_MSG_AUDIT.
These tables 32GB in the DBD table space.
I tried to use the URL:
http://<host>:<port>/MessagingSystem/archiving/reorgdb.jsp
BUT to NO avail.
How do I DELETE or ARCHIVE these messages ?
============================================
Here are some more details on the content of the tables (I took into account 1 MONTH retention):
db2 "select count(*) from sapxi3db.XI_AF_MSG_AUDIT where STATUS='SUCC' and TIME_STAMP < '2007-09-10 00:00:00'"
28947
1 record(s) selected.
db2 "select count(*) from sapxi3db.XI_AF_MSG_AUDIT where STATUS='ERR' and TIME_STAMP < '2007-09-10 00:00:00'"
13243
1 record(s) selected.
db2 "select count(*) from sapxipdb.XI_AF_MSG where PERSIST_UNTIL < '2007-09-10 00:00:00' and STATUS='NDLV'"
1048
1 record(s) selected.
db2 "select count(*) from sapxipdb.XI_AF_MSG where PERSIST_UNTIL < '2007-09-10 00:00:00' and STATUS='DLVD'"
0
1 record(s) selected.Hi,
First, thank you VERY much for answering.
Now to your questions:
1. When using the URL:
http://<host>:<port>/MessagingSystem/archiving/reorgdb.jsp
I did NOT get any ERROR messages.
Thousands of messages where DELETED successfully.
However, the number of rows in XI_AF_MSG_AUDIT did NOT reduce.
2. I used the default archiving and deletion customizations and jobs.
However, I ran them manually a few times a day with NO change in the
number of rows in XI_AF_MSG_AUDIT
What do you mean by "customized any Archiving for adapter Engine" ?
. In RWB, I do see the default job is running
Have you customized any Archiving for adapter Engine or You are using default arciving which runs every 24 hrs.
3. I did ser the retention period for the adapter engine messages in visual admin in seconds...
Please, advise further.
Kind regards,
Gil -
My ActiveX Controls that i downloaded (APTLaser Control and APTTEC Control) are not showing up
I got a new computer and im trying to bring over all of my files from my previous computer, however after downloading everything i was unable to use my ActiveX controls for the above objects. When i try to reinsert the object, they are not there, how to i bring in new controls to insert into the ActiveX container? Labview
-DannyHi zhuangd1,
Did you try registerin the ActiveX control manually, as described here?
Cheers!
TJ G -
Best way to obtain records that are NOT in another table
I have two rather large tables in oracle. An Account table that has millions of rows. Each account may be enrolled into a particular program and therefore can also be in an Enrollment table, also with millions of rows. I'm trying to find the most optimal way to find any accounts in ACCOUNT that are NOT in the Enrollment table.
I was doing something like this:
select /*+ index(ACCOUNT idx_acct_no) */
a.acct_no
from ACCOUNT a
where a.acct_no not in (Select e.acct_no from ENROLLMENT e);
This takes a VERY long time to execute, even though I am using the index.
I even tried to use the PK on the ACCOUNT table, as it is also a FK on the ENROLLMENT table as such:
select a.acct_no
from ACCOUNT a
where a.id not in (Select e.id from ENROLLMENT e);
this too takes too long to get back (if at all).
Is there a better way to do this selection please?Well if you have the energy to type in the whole list, the syntax you've given will work, unless you blow the permitted number of elements.
But a practical solution would be to turn the list into a table. You still haven't got the hang of this "giving us enough information" concept, so let's presume:
(1) you're on a version of the databasse whoch is 9i or higher
(2) you have this list in a file of some sort.
In which case use an external table or perhaps a pipelined function to generate output which can be used in a SQL statement.
If neither of these solutions works for you please provide sufficient information for us to answer your question correctly. Your future co-operation is appreciated.
cheers, APC -
The shuttle controls are not visible in Aperture 3
the shuttle control units are not anymore shown in Aperture only the scolling arrows. Is it possible to deactivate them? Any idea how to reactivate?
ThanksThey were removed at some point after 3.0.
You can still use the keyboard shortcuts ("j", "k", "l"). -
Data are not displaying af:table.
hi experts,
am using jdev 11.1.1.5.0
am using af:query panel and af:table.
problem, is while runnnig the jspx page the af:table datas are not shown automaticaaly.
but here i can want hit some buttons after hitting,
the table get refreshes and datas are appearing. i dono y it's happening,
am using 7 0r 8 tabs and af:tbale am not facing this problem on that those af:table.
but problematic is this tab af:query n af:table. code is pasted here.
<af:showDetailItem text="Link GL Accounts"
binding="#{pageFlowScope.managedbean_GeneralLedger.sdi10}"
id="sdi10">
<af:panelGroupLayout layout="vertical"
binding="#{pageFlowScope.managedbean_GeneralLedger.pgl7}"
id="pgl7">
<af:query id="q1" headerText="Search"
disclosed="true"
value="#{bindings.GlLvlAccountsVOCriteriaQuery.queryDescriptor}"
model="#{bindings.GlLvlAccountsVOCriteriaQuery.queryModel}"
queryListener="#{bindings.GlLvlAccountsVOCriteriaQuery.processQuery}"
queryOperationListener="#{bindings.GlLvlAccountsVOCriteriaQuery.processQueryOperation}"
binding="#{pageFlowScope.managedbean_GeneralLedger.q1}"/>
</af:panelGroupLayout>
<af:panelBox text="Search Result"
binding="#{pageFlowScope.managedbean_GeneralLedger.pb8}"
id="pb8" styleClass="AFStretchWidth"
inlineStyle="width:100.0%;">
<f:facet name="toolbar">
<af:group binding="#{pageFlowScope.managedbean_GeneralLedger.g7}"
id="g7">
<af:commandButton text="Insert"
disabled="#{!bindings.CreateInsert6.enabled}"
binding="#{pageFlowScope.managedbean_GeneralLedger.cb22}"
id="cb22"
action="#{pageFlowScope.managedbean_GeneralLedger.cb22_action2}"
>
<af:showPopupBehavior popupId="p2"/>
</af:commandButton>
<af:popup binding="#{pageFlowScope.managedbean_GeneralLedger.p2}"
id="p2">
<af:dialog binding="#{pageFlowScope.managedbean_GeneralLedger.d3}"
id="d3" type="cancel">
<af:panelFormLayout binding="#{pageFlowScope.managedbean_GeneralLedger.pfl1}"
id="pfl1">
<af:inputListOfValues id="inputListOfValues1"
popupTitle="Search and Select: #{bindings.GlalPlant.hints.label}"
value="#{bindings.GlalPlant.inputValue}"
label="#{bindings.GlalPlant.hints.label}"
model="#{bindings.GlalPlant.listOfValuesModel}"
required="#{bindings.GlalPlant.hints.mandatory}"
columns="#{bindings.GlalPlant.hints.displayWidth}"
shortDesc="#{bindings.GlalPlant.hints.tooltip}"
binding="#{pageFlowScope.managedbean_GeneralLedger.inputListOfValues1}">
<f:validator binding="#{bindings.GlalPlant.validator}"/>
</af:inputListOfValues>
<af:inputText value="#{bindings.GlalPlantDesc.inputValue}"
label="#{bindings.GlalPlantDesc.hints.label}"
required="#{bindings.GlalPlantDesc.hints.mandatory}"
columns="#{bindings.GlalPlantDesc.hints.displayWidth}"
maximumLength="#{bindings.GlalPlantDesc.hints.precision}"
shortDesc="#{bindings.GlalPlantDesc.hints.tooltip}"
partialTriggers="glalPlantId"
binding="#{pageFlowScope.managedbean_GeneralLedger.it38}"
id="it38">
<f:validator binding="#{bindings.GlalPlantDesc.validator}"/>
</af:inputText>
<af:inputListOfValues id="inputListOfValues2"
popupTitle="Search and Select: #{bindings.GlalLvl1.hints.label}"
value="#{bindings.GlalLvl1.inputValue}"
label="#{bindings.GlalLvl1.hints.label}"
model="#{bindings.GlalLvl1.listOfValuesModel}"
required="#{bindings.GlalLvl1.hints.mandatory}"
columns="#{bindings.GlalLvl1.hints.displayWidth}"
shortDesc="#{bindings.GlalLvl1.hints.tooltip}"
binding="#{pageFlowScope.managedbean_GeneralLedger.inputListOfValues2}">
<f:validator binding="#{bindings.GlalLvl1.validator}"/>
</af:inputListOfValues>
<af:inputText value="#{bindings.GlalLvl1Desc.inputValue}"
label="#{bindings.GlalLvl1Desc.hints.label}"
required="#{bindings.GlalLvl1Desc.hints.mandatory}"
columns="#{bindings.GlalLvl1Desc.hints.displayWidth}"
maximumLength="#{bindings.GlalLvl1Desc.hints.precision}"
shortDesc="#{bindings.GlalLvl1Desc.hints.tooltip}"
partialTriggers="glalLvl1Id"
binding="#{pageFlowScope.managedbean_GeneralLedger.it39}"
id="it39">
<f:validator binding="#{bindings.GlalLvl1Desc.validator}"/>
</af:inputText>
<af:inputListOfValues id="inputListOfValues3"
popupTitle="Search and Select: #{bindings.GlalLvl2.hints.label}"
value="#{bindings.GlalLvl2.inputValue}"
label="#{bindings.GlalLvl2.hints.label}"
model="#{bindings.GlalLvl2.listOfValuesModel}"
required="#{bindings.GlalLvl2.hints.mandatory}"
columns="#{bindings.GlalLvl2.hints.displayWidth}"
shortDesc="#{bindings.GlalLvl2.hints.tooltip}"
binding="#{pageFlowScope.managedbean_GeneralLedger.inputListOfValues3}">
<f:validator binding="#{bindings.GlalLvl2.validator}"/>
</af:inputListOfValues>
<af:inputText value="#{bindings.GlalLvl2Desc.inputValue}"
label="#{bindings.GlalLvl2Desc.hints.label}"
required="#{bindings.GlalLvl2Desc.hints.mandatory}"
columns="#{bindings.GlalLvl2Desc.hints.displayWidth}"
maximumLength="#{bindings.GlalLvl2Desc.hints.precision}"
shortDesc="#{bindings.GlalLvl2Desc.hints.tooltip}"
partialTriggers="glalLvl2Id"
binding="#{pageFlowScope.managedbean_GeneralLedger.it40}"
id="it40">
<f:validator binding="#{bindings.GlalLvl2Desc.validator}"/>
</af:inputText>
<af:inputListOfValues id="inputListOfValues4"
popupTitle="Search and Select: #{bindings.GlalLvl3.hints.label}"
value="#{bindings.GlalLvl3.inputValue}"
label="#{bindings.GlalLvl3.hints.label}"
model="#{bindings.GlalLvl3.listOfValuesModel}"
required="#{bindings.GlalLvl3.hints.mandatory}"
columns="#{bindings.GlalLvl3.hints.displayWidth}"
shortDesc="#{bindings.GlalLvl3.hints.tooltip}"
binding="#{pageFlowScope.managedbean_GeneralLedger.inputListOfValues4}">
<f:validator binding="#{bindings.GlalLvl3.validator}"/>
</af:inputListOfValues>
<af:inputText value="#{bindings.GlalLvl3Desc.inputValue}"
label="#{bindings.GlalLvl3Desc.hints.label}"
required="#{bindings.GlalLvl3Desc.hints.mandatory}"
columns="#{bindings.GlalLvl3Desc.hints.displayWidth}"
maximumLength="#{bindings.GlalLvl3Desc.hints.precision}"
shortDesc="#{bindings.GlalLvl3Desc.hints.tooltip}"
partialTriggers="glalLvl3Id"
binding="#{pageFlowScope.managedbean_GeneralLedger.it41}"
id="it41">
<f:validator binding="#{bindings.GlalLvl3Desc.validator}"/>
</af:inputText>
<af:inputListOfValues id="inputListOfValues5"
popupTitle="Search and Select: #{bindings.GlalLvl4.hints.label}"
value="#{bindings.GlalLvl4.inputValue}"
label="#{bindings.GlalLvl4.hints.label}"
model="#{bindings.GlalLvl4.listOfValuesModel}"
required="#{bindings.GlalLvl4.hints.mandatory}"
columns="#{bindings.GlalLvl4.hints.displayWidth}"
shortDesc="#{bindings.GlalLvl4.hints.tooltip}"
binding="#{pageFlowScope.managedbean_GeneralLedger.inputListOfValues5}">
<f:validator binding="#{bindings.GlalLvl4.validator}"/>
</af:inputListOfValues>
<af:inputText value="#{bindings.GlalLvl4Desc.inputValue}"
label="#{bindings.GlalLvl4Desc.hints.label}"
required="#{bindings.GlalLvl4Desc.hints.mandatory}"
columns="#{bindings.GlalLvl4Desc.hints.displayWidth}"
maximumLength="#{bindings.GlalLvl4Desc.hints.precision}"
shortDesc="#{bindings.GlalLvl4Desc.hints.tooltip}"
partialTriggers="glalLvl4Id"
binding="#{pageFlowScope.managedbean_GeneralLedger.it42}"
id="it42">
<f:validator binding="#{bindings.GlalLvl4Desc.validator}"/>
</af:inputText>
<af:inputListOfValues id="inputListOfValues6"
popupTitle="Search and Select: #{bindings.GlalAcct.hints.label}"
value="#{bindings.GlalAcct.inputValue}"
label="#{bindings.GlalAcct.hints.label}"
model="#{bindings.GlalAcct.listOfValuesModel}"
required="#{bindings.GlalAcct.hints.mandatory}"
columns="#{bindings.GlalAcct.hints.displayWidth}"
shortDesc="#{bindings.GlalAcct.hints.tooltip}"
binding="#{pageFlowScope.managedbean_GeneralLedger.inputListOfValues6}">
<f:validator binding="#{bindings.GlalAcct.validator}"/>
</af:inputListOfValues>
<af:inputText value="#{bindings.GlalAcctDesc.inputValue}"
label="#{bindings.GlalAcctDesc.hints.label}"
required="#{bindings.GlalAcctDesc.hints.mandatory}"
columns="#{bindings.GlalAcctDesc.hints.displayWidth}"
maximumLength="#{bindings.GlalAcctDesc.hints.precision}"
shortDesc="#{bindings.GlalAcctDesc.hints.tooltip}"
partialTriggers="glalAcctId"
binding="#{pageFlowScope.managedbean_GeneralLedger.it43}"
id="it43">
<f:validator binding="#{bindings.GlalAcctDesc.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.GlalDesc1.inputValue}"
label="#{bindings.GlalDesc1.hints.label}"
required="#{bindings.GlalDesc1.hints.mandatory}"
columns="#{bindings.GlalDesc1.hints.displayWidth}"
maximumLength="#{bindings.GlalDesc1.hints.precision}"
shortDesc="#{bindings.GlalDesc1.hints.tooltip}"
binding="#{pageFlowScope.managedbean_GeneralLedger.it44}"
id="it44">
<f:validator binding="#{bindings.GlalDesc1.validator}"/>
</af:inputText>
<af:inputListOfValues id="inputListOfValues7"
popupTitle="Search and Select: #{bindings.GlalClId.hints.label}"
value="#{bindings.GlalClId.inputValue}"
label="#{bindings.GlalClId.hints.label}"
model="#{bindings.GlalClId.listOfValuesModel}"
required="#{bindings.GlalClId.hints.mandatory}"
columns="#{bindings.GlalClId.hints.displayWidth}"
shortDesc="#{bindings.GlalClId.hints.tooltip}"
binding="#{pageFlowScope.managedbean_GeneralLedger.inputListOfValues7}">
<f:validator binding="#{bindings.GlalClId.validator}"/>
</af:inputListOfValues>
<af:inputText value="#{bindings.GlalClassDesc.inputValue}"
label="#{bindings.GlalClassDesc.hints.label}"
required="#{bindings.GlalClassDesc.hints.mandatory}"
columns="#{bindings.GlalClassDesc.hints.displayWidth}"
maximumLength="#{bindings.GlalClassDesc.hints.precision}"
shortDesc="#{bindings.GlalClassDesc.hints.tooltip}"
partialTriggers="glalClIdId"
binding="#{pageFlowScope.managedbean_GeneralLedger.it45}"
id="it45">
<f:validator binding="#{bindings.GlalClassDesc.validator}"/>
</af:inputText>
<af:selectOneChoice value="#{bindings.GlalOptType.inputValue}"
label="#{bindings.GlalOptType.label}"
required="#{bindings.GlalOptType.hints.mandatory}"
shortDesc="#{bindings.GlalOptType.hints.tooltip}"
binding="#{pageFlowScope.managedbean_GeneralLedger.soc4}"
id="soc4">
<f:selectItems value="#{bindings.GlalOptType.items}"
binding="#{pageFlowScope.managedbean_GeneralLedger.si4}"
id="si4"/>
</af:selectOneChoice>
<af:selectOneChoice value="#{bindings.GlalStatus.inputValue}"
label="#{bindings.GlalStatus.label}"
required="#{bindings.GlalStatus.hints.mandatory}"
shortDesc="#{bindings.GlalStatus.hints.tooltip}"
binding="#{pageFlowScope.managedbean_GeneralLedger.soc5}"
id="soc5">
<f:selectItems value="#{bindings.GlalStatus.items}"
binding="#{pageFlowScope.managedbean_GeneralLedger.si5}"
id="si5"/>
</af:selectOneChoice>
<af:selectBooleanCheckbox value="#{bindings.GlalBudFlag.inputValue}"
label="#{bindings.GlalBudFlag.label}"
shortDesc="#{bindings.GlalBudFlag.hints.tooltip}"
binding="#{pageFlowScope.managedbean_GeneralLedger.sbc4}"
id="sbc4"/>
<f:facet name="footer">
<af:panelGroupLayout layout="vertical"
binding="#{pageFlowScope.managedbean_GeneralLedger.pgl8}"
id="pgl8">
<af:commandButton text="Commit"
binding="#{pageFlowScope.managedbean_GeneralLedger.cb29}"
id="cb29"
actionListener="#{bindings.Commit.execute}"
disabled="#{!bindings.Commit.enabled}"/>
</af:panelGroupLayout>
</f:facet>
</af:panelFormLayout>
</af:dialog>
</af:popup>
<af:commandButton actionListener="#{bindings.Delete6.execute}"
text="Delete6"
disabled="#{!bindings.Delete6.enabled}"
binding="#{pageFlowScope.managedbean_GeneralLedger.cb24}"
id="cb24"/>
</af:group>
</f:facet>
remaing code continues another post.
Edited by: Erp on Oct 12, 2011 4:55 AMremaing code
<af:panelCollection binding="#{pageFlowScope.managedbean_GeneralLedger.pc7}"
id="pc7" styleClass="AFStretchWidth"
inlineStyle="width:100.0%;">
<f:facet name="menus"/>
<f:facet name="toolbar"/>
<f:facet name="statusbar"/>
<af:table value="#{bindings.GlLvlAccounts1.collectionModel}"
var="row"
rows="#{bindings.GlLvlAccounts1.rangeSize}"
emptyText="#{bindings.GlLvlAccounts1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.GlLvlAccounts1.rangeSize}"
rowBandingInterval="0"
filterModel="#{bindings.GlLvlAccountsVOCriteriaQuery.queryDescriptor}"
queryListener="#{bindings.GlLvlAccountsVOCriteriaQuery.processQuery}"
filterVisible="true" varStatus="vs"
selectedRowKeys="#{bindings.GlLvlAccounts1.collectionModel.selectedRow}"
selectionListener="#{bindings.GlLvlAccounts1.collectionModel.makeCurrent}"
rowSelection="single"
binding="#{pageFlowScope.managedbean_GeneralLedger.t7}"
id="t7" columnStretching="column:c48"
styleClass="AFStretchWidth"
inlineStyle="width:100.0%;"
partialTriggers=":::q1 :::cb22 :::cb23 :::cb24 :::cb25 :::cb26 :::cb27 :::cb28">
<af:column sortProperty="GlalPlant" filterable="true"
sortable="true"
headerText="#{bindings.GlLvlAccounts1.hints.GlalPlant.label}"
id="c47">
<af:inputListOfValues id="glalPlantId"
popupTitle="Search and Select: #{bindings.GlLvlAccounts1.hints.GlalPlant.label}"
value="#{row.bindings.GlalPlant.inputValue}"
model="#{row.bindings.GlalPlant.listOfValuesModel}"
required="#{bindings.GlLvlAccounts1.hints.GlalPlant.mandatory}"
columns="#{bindings.GlLvlAccounts1.hints.GlalPlant.displayWidth}"
shortDesc="#{bindings.GlLvlAccounts1.hints.GlalPlant.tooltip}">
<f:validator binding="#{row.bindings.GlalPlant.validator}"/>
</af:inputListOfValues>
</af:column>
<af:column sortProperty="GlalPlantDesc"
filterable="true" sortable="true"
headerText="#{bindings.GlLvlAccounts1.hints.GlalPlantDesc.label}"
id="c38">
<af:inputText value="#{row.bindings.GlalPlantDesc.inputValue}"
label="#{bindings.GlLvlAccounts1.hints.GlalPlantDesc.label}"
required="#{bindings.GlLvlAccounts1.hints.GlalPlantDesc.mandatory}"
columns="#{bindings.GlLvlAccounts1.hints.GlalPlantDesc.displayWidth}"
maximumLength="#{bindings.GlLvlAccounts1.hints.GlalPlantDesc.precision}"
shortDesc="#{bindings.GlLvlAccounts1.hints.GlalPlantDesc.tooltip}"
id="it35">
<f:validator binding="#{row.bindings.GlalPlantDesc.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="GlalLvl1" filterable="true"
sortable="true"
headerText="#{bindings.GlLvlAccounts1.hints.GlalLvl1.label}"
id="c46">
<af:inputListOfValues id="glalLvl1Id"
popupTitle="Search and Select: #{bindings.GlLvlAccounts1.hints.GlalLvl1.label}"
value="#{row.bindings.GlalLvl1.inputValue}"
model="#{row.bindings.GlalLvl1.listOfValuesModel}"
required="#{bindings.GlLvlAccounts1.hints.GlalLvl1.mandatory}"
columns="#{bindings.GlLvlAccounts1.hints.GlalLvl1.displayWidth}"
shortDesc="#{bindings.GlLvlAccounts1.hints.GlalLvl1.tooltip}">
<f:validator binding="#{row.bindings.GlalLvl1.validator}"/>
</af:inputListOfValues>
</af:column>
<af:column sortProperty="GlalLvl1Desc"
filterable="true" sortable="true"
headerText="#{bindings.GlLvlAccounts1.hints.GlalLvl1Desc.label}"
id="c43">
<af:inputText value="#{row.bindings.GlalLvl1Desc.inputValue}"
label="#{bindings.GlLvlAccounts1.hints.GlalLvl1Desc.label}"
required="#{bindings.GlLvlAccounts1.hints.GlalLvl1Desc.mandatory}"
columns="#{bindings.GlLvlAccounts1.hints.GlalLvl1Desc.displayWidth}"
maximumLength="#{bindings.GlLvlAccounts1.hints.GlalLvl1Desc.precision}"
shortDesc="#{bindings.GlLvlAccounts1.hints.GlalLvl1Desc.tooltip}"
id="it33">
<f:validator binding="#{row.bindings.GlalLvl1Desc.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="GlalLvl2" filterable="true"
sortable="true"
headerText="#{bindings.GlLvlAccounts1.hints.GlalLvl2.label}"
id="c45">
<af:inputListOfValues id="glalLvl2Id"
popupTitle="Search and Select: #{bindings.GlLvlAccounts1.hints.GlalLvl2.label}"
value="#{row.bindings.GlalLvl2.inputValue}"
model="#{row.bindings.GlalLvl2.listOfValuesModel}"
required="#{bindings.GlLvlAccounts1.hints.GlalLvl2.mandatory}"
columns="#{bindings.GlLvlAccounts1.hints.GlalLvl2.displayWidth}"
shortDesc="#{bindings.GlLvlAccounts1.hints.GlalLvl2.tooltip}">
<f:validator binding="#{row.bindings.GlalLvl2.validator}"/>
</af:inputListOfValues>
</af:column>
<af:column sortProperty="GlalLvl2Desc"
filterable="true" sortable="true"
headerText="#{bindings.GlLvlAccounts1.hints.GlalLvl2Desc.label}"
id="c35">
<af:inputText value="#{row.bindings.GlalLvl2Desc.inputValue}"
label="#{bindings.GlLvlAccounts1.hints.GlalLvl2Desc.label}"
required="#{bindings.GlLvlAccounts1.hints.GlalLvl2Desc.mandatory}"
columns="#{bindings.GlLvlAccounts1.hints.GlalLvl2Desc.displayWidth}"
maximumLength="#{bindings.GlLvlAccounts1.hints.GlalLvl2Desc.precision}"
shortDesc="#{bindings.GlLvlAccounts1.hints.GlalLvl2Desc.tooltip}"
id="it29">
<f:validator binding="#{row.bindings.GlalLvl2Desc.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="GlalLvl3" filterable="true"
sortable="true"
headerText="#{bindings.GlLvlAccounts1.hints.GlalLvl3.label}"
id="c41">
<af:inputListOfValues id="glalLvl3Id"
popupTitle="Search and Select: #{bindings.GlLvlAccounts1.hints.GlalLvl3.label}"
value="#{row.bindings.GlalLvl3.inputValue}"
model="#{row.bindings.GlalLvl3.listOfValuesModel}"
required="#{bindings.GlLvlAccounts1.hints.GlalLvl3.mandatory}"
columns="#{bindings.GlLvlAccounts1.hints.GlalLvl3.displayWidth}"
shortDesc="#{bindings.GlLvlAccounts1.hints.GlalLvl3.tooltip}">
<f:validator binding="#{row.bindings.GlalLvl3.validator}"/>
</af:inputListOfValues>
</af:column>
<af:column sortProperty="GlalLvl3Desc"
filterable="true" sortable="true"
headerText="#{bindings.GlLvlAccounts1.hints.GlalLvl3Desc.label}"
id="c37">
<af:inputText value="#{row.bindings.GlalLvl3Desc.inputValue}"
label="#{bindings.GlLvlAccounts1.hints.GlalLvl3Desc.label}"
required="#{bindings.GlLvlAccounts1.hints.GlalLvl3Desc.mandatory}"
columns="#{bindings.GlLvlAccounts1.hints.GlalLvl3Desc.displayWidth}"
maximumLength="#{bindings.GlLvlAccounts1.hints.GlalLvl3Desc.precision}"
shortDesc="#{bindings.GlLvlAccounts1.hints.GlalLvl3Desc.tooltip}"
id="it32">
<f:validator binding="#{row.bindings.GlalLvl3Desc.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="GlalLvl4" filterable="true"
sortable="true"
headerText="#{bindings.GlLvlAccounts1.hints.GlalLvl4.label}"
id="c34">
<af:inputListOfValues id="glalLvl4Id"
popupTitle="Search and Select: #{bindings.GlLvlAccounts1.hints.GlalLvl4.label}"
value="#{row.bindings.GlalLvl4.inputValue}"
model="#{row.bindings.GlalLvl4.listOfValuesModel}"
required="#{bindings.GlLvlAccounts1.hints.GlalLvl4.mandatory}"
columns="#{bindings.GlLvlAccounts1.hints.GlalLvl4.displayWidth}"
shortDesc="#{bindings.GlLvlAccounts1.hints.GlalLvl4.tooltip}">
<f:validator binding="#{row.bindings.GlalLvl4.validator}"/>
</af:inputListOfValues>
</af:column>
<af:column sortProperty="GlalLvl4Desc"
filterable="true" sortable="true"
headerText="#{bindings.GlLvlAccounts1.hints.GlalLvl4Desc.label}"
id="c42">
<af:inputText value="#{row.bindings.GlalLvl4Desc.inputValue}"
label="#{bindings.GlLvlAccounts1.hints.GlalLvl4Desc.label}"
required="#{bindings.GlLvlAccounts1.hints.GlalLvl4Desc.mandatory}"
columns="#{bindings.GlLvlAccounts1.hints.GlalLvl4Desc.displayWidth}"
maximumLength="#{bindings.GlLvlAccounts1.hints.GlalLvl4Desc.precision}"
shortDesc="#{bindings.GlLvlAccounts1.hints.GlalLvl4Desc.tooltip}"
id="it30">
<f:validator binding="#{row.bindings.GlalLvl4Desc.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="GlalAcct" filterable="true"
sortable="true"
headerText="#{bindings.GlLvlAccounts1.hints.GlalAcct.label}"
id="c33">
<af:inputListOfValues id="glalAcctId"
popupTitle="Search and Select: #{bindings.GlLvlAccounts1.hints.GlalAcct.label}"
value="#{row.bindings.GlalAcct.inputValue}"
model="#{row.bindings.GlalAcct.listOfValuesModel}"
required="#{bindings.GlLvlAccounts1.hints.GlalAcct.mandatory}"
columns="#{bindings.GlLvlAccounts1.hints.GlalAcct.displayWidth}"
shortDesc="#{bindings.GlLvlAccounts1.hints.GlalAcct.tooltip}">
<f:validator binding="#{row.bindings.GlalAcct.validator}"/>
</af:inputListOfValues>
</af:column>
<af:column sortProperty="GlalAcctDesc"
filterable="true" sortable="true"
headerText="#{bindings.GlLvlAccounts1.hints.GlalAcctDesc.label}"
id="c44">
<af:inputText value="#{row.bindings.GlalAcctDesc.inputValue}"
label="#{bindings.GlLvlAccounts1.hints.GlalAcctDesc.label}"
required="#{bindings.GlLvlAccounts1.hints.GlalAcctDesc.mandatory}"
columns="#{bindings.GlLvlAccounts1.hints.GlalAcctDesc.displayWidth}"
maximumLength="#{bindings.GlLvlAccounts1.hints.GlalAcctDesc.precision}"
shortDesc="#{bindings.GlLvlAccounts1.hints.GlalAcctDesc.tooltip}"
id="it34">
<f:validator binding="#{row.bindings.GlalAcctDesc.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="GlalDesc1" filterable="true"
sortable="true"
headerText="#{bindings.GlLvlAccounts1.hints.GlalDesc1.label}"
id="c28">
<af:inputText value="#{row.bindings.GlalDesc1.inputValue}"
label="#{bindings.GlLvlAccounts1.hints.GlalDesc1.label}"
required="#{bindings.GlLvlAccounts1.hints.GlalDesc1.mandatory}"
columns="#{bindings.GlLvlAccounts1.hints.GlalDesc1.displayWidth}"
maximumLength="#{bindings.GlLvlAccounts1.hints.GlalDesc1.precision}"
shortDesc="#{bindings.GlLvlAccounts1.hints.GlalDesc1.tooltip}"
id="it36">
<f:validator binding="#{row.bindings.GlalDesc1.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="GlalClId" filterable="true"
sortable="true"
headerText="#{bindings.GlLvlAccounts1.hints.GlalClId.label}"
id="c36">
<af:inputListOfValues id="glalClIdId"
popupTitle="Search and Select: #{bindings.GlLvlAccounts1.hints.GlalClId.label}"
value="#{row.bindings.GlalClId.inputValue}"
model="#{row.bindings.GlalClId.listOfValuesModel}"
required="#{bindings.GlLvlAccounts1.hints.GlalClId.mandatory}"
columns="#{bindings.GlLvlAccounts1.hints.GlalClId.displayWidth}"
shortDesc="#{bindings.GlLvlAccounts1.hints.GlalClId.tooltip}">
<f:validator binding="#{row.bindings.GlalClId.validator}"/>
</af:inputListOfValues>
</af:column>
<af:column sortProperty="GlalClassDesc"
filterable="true" sortable="true"
headerText="#{bindings.GlLvlAccounts1.hints.GlalClassDesc.label}"
id="c39">
<af:inputText value="#{row.bindings.GlalClassDesc.inputValue}"
label="#{bindings.GlLvlAccounts1.hints.GlalClassDesc.label}"
required="#{bindings.GlLvlAccounts1.hints.GlalClassDesc.mandatory}"
columns="#{bindings.GlLvlAccounts1.hints.GlalClassDesc.displayWidth}"
maximumLength="#{bindings.GlLvlAccounts1.hints.GlalClassDesc.precision}"
shortDesc="#{bindings.GlLvlAccounts1.hints.GlalClassDesc.tooltip}"
id="it37">
<f:validator binding="#{row.bindings.GlalClassDesc.validator}"/>
</af:inputText>
</af:column>
<af:column sortProperty="GlalOptType"
filterable="true" sortable="true"
headerText="#{bindings.GlLvlAccounts1.hints.GlalOptType.label}"
id="c48">
<af:selectOneChoice value="#{row.bindings.GlalOptType.inputValue}"
label="#{row.bindings.GlalOptType.label}"
required="#{bindings.GlLvlAccounts1.hints.GlalOptType.mandatory}"
shortDesc="#{bindings.GlLvlAccounts1.hints.GlalOptType.tooltip}"
id="soc2">
<f:selectItems value="#{row.bindings.GlalOptType.items}"
id="si2"/>
</af:selectOneChoice>
</af:column>
<af:column sortProperty="GlalStatus" filterable="true"
sortable="true"
headerText="#{bindings.GlLvlAccounts1.hints.GlalStatus.label}"
id="c27">
<af:selectOneChoice value="#{row.bindings.GlalStatus.inputValue}"
label="#{row.bindings.GlalStatus.label}"
required="#{bindings.GlLvlAccounts1.hints.GlalStatus.mandatory}"
shortDesc="#{bindings.GlLvlAccounts1.hints.GlalStatus.tooltip}"
id="soc3">
<f:selectItems value="#{row.bindings.GlalStatus.items}"
id="si3"/>
</af:selectOneChoice>
</af:column>
<af:column sortProperty="GlalBudFlag"
filterable="true" sortable="true"
headerText="#{bindings.GlLvlAccounts1.hints.GlalBudFlag.label}"
id="c40">
<af:selectBooleanCheckbox value="#{row.bindings.GlalBudFlag.inputValue}"
label="#{row.bindings.GlalBudFlag.label}"
shortDesc="#{bindings.GlLvlAccounts1.hints.GlalBudFlag.tooltip}"
id="sbc3"/>
</af:column>
</af:table>
</af:panelCollection>
</af:panelBox>
</af:showDetailItem>i deleted this af:query n af:table .
and do the same. but problem is still exist.
Maybe you are looking for
-
Need to concatonate multiple values for same key columns into one string
Hi...I'm attempting to use PL/SQL to read through a table containing more than one column value for a set of keys, and concatonate those values together into one string. For example, in the STUDENT table, for a STUDENT_ID there are multiple MAJORS_AC
-
Change multiple files name at once
Hi I would like to know if someone knows how to change multiple files name in mac. I need to name hundreds of files name, and dont want to do it one by one ... Example: Change from: Doc 1, Doc 2, Doc3 ...to: 2010Summer1; 2010Summer2,etc... Thanks in
-
Hitting the chapter on subprograms and packages in the 2-day developer guide brought up material that is completely new to me, so I'm trying to think my way through it and hoped you guys might help me put some of the pieces together into at least a r
-
Migration tool transferring one minute remaining
Macbook core 2 duo Intel to MBP core 2 duo intel migration assistant hangs at one minute remaining "transferring files to support applications, under one minute remaining." Its been saying this from last night to this morning I have done this 3 times
-
Hi, I'm looking for how to set the asset tag information int the smbios of a toshiba tecra M11 laptop ? I have found this post LINK:[http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=40167] but the tool assettag.Exe don't keep th