Controlling (CO) Professional level certification material code

Hi Folks,
Could you pls let me know the Material code for Controlling Professional level certification course
Thanks in advance
Sneha

Hi,
it is available in the following link
http://www.sap.com/services/education
regards,
ram

Similar Messages

For Professional level certification aspirants in SAP Controlling module

Dear all Professional level Certification aspirants in SAP CO module,
I have recently passed the Certification test on SAP Management Accounting (CO) module in version ERP 6.0 EHP4. I have more than 4 years experience in SAP Controlling module.The following are some of my suggestions regarding preparation for the exam.
1. All the questions were scenario based. The exam tests expert level knowledge and real time scenarios in the module. The theoritical knowledge is not sufficient to clear the exam. Unless you have atleast 5 to 6 implementations in Controlling module, it is not advisable to give it a try.
2. Detailed knowledge of the system configuration settings about the various courses mentioned in the syllabus is required. One needs a clear understanding of Special costing functions, ERP integration, Transfer Pricing, Material ledger, New GL Parallel valuation, Planning and Budgeting fuctions in various components etc.
3. The exam tests in-depth knowledge about various integration aspects of Controlling module with other modules. The advanced master data functionalities of other logistical modules like MM, SD, PP, PM, QM, PS, CS, HCM is tested in detail.
4. Several methods of process and performance optimization of the system are also tested.
3. Some reporting aspects of BW and BI are also tested. The cross application aspects of the system are also tested.
4. The exam also tests the real time skills in preparing Blueprints, Business Process design and trouble shooting the system. Being knowledgeable about some of the processing errors and message classes will be of great help.
Hope this information helps you in preparing for the certification.
Should you need any clarifications, please post a reply to this thread and I will post answers.
All the Best!!
VS.

Hi Vikrant,
the pass mark for the exam is 58%. However it may be different. The passing mark shown on your screen on the day will be the correct passing mark.
All the questions were scenario based which would involve high analytical skills and through understanding of the system integration. It would be difficult to tell any specific question. The questions carry different weightage. If you answer the questions with less weightage correctly than the questions with more weightage, you end up scoring less though you answer more number of questions correctly. and it is vice versa. Go through your syllabus and cources and try to concentrate on the topic areas which contain more weightage.
Moreover, the exam is not completely technical in nature. It tests a lot of analytical and problem solving skills required on the job.
Note:Please do not ask the questions or contents of the exam as they are confidential.
Hope this information helps you.
All the best for your exam!
Regards,
Vishnu.

BI Professional Level Certification

Locking this thread since this will start link farms ...
Hello Experts,
I am an associate level certified BI consultant. I aspire for professional level certification as well.
I need guidance on how to go about it. Any streamlined preparation guideline would be very grateful.
Any question paper dump, etc or any valuable input pertaining to this subject would be helpful.
As of now I have only one link below to follow:
http://www.sap.com/services/education/certification/certificationtest.epx?context=%5b%5bP_BIE_70%7cG%5d%5d%7c
Thanks,
Mihir
Edited by: Arun Varadarajan on Jun 9, 2009 6:54 PM

Please visit a site called tinyurl and use the same
Hi Mihir
For preparing to certification you can just refer to the following thread
Re: SAP BW Certification
Online BW test
http://www.hometutorials.com/SAP-BW/
Document link
New to Materials Management / Warehouse Management?
Certification Question
http://www.sap4india.com/SAP-bi-Interview-Questions.html
BI 7.0 certification questions
Some certification Questions
certification question
Forum post in BI General: Re: BI 7.0 certification Questions
Re: BI 7.0 certification Questions
Visit these links:
http://www.sapbw.info/SAP-BW-Certification-Test-Simulation.html
BI certification tips pls
All the info is compiled at one place.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/biCertificationInfo-Links
and also visit this link:
BI certification
BW Certification imp links:
Plz refer following link it give detailed analysis , i think bw tabs are sufficient for certification:
http://www.sap.com:80/services/education/certification/certroles/certificationtest.epx?context=
FFC760B8923D16BB5150DAE63E7C1A6B331AF0B9E3A8F73CE3A9B7046E051044503600C9
11DBA13DCE978D3AC9057626D2B68111A7CD2D707E2EEC31213097E46EB790DD0106435EE
0756F7B22F3FA4B4FF0645C06954BF3A150E023B4164DA2C3943DE02E599735DB9B4334B30B
38FF20A1DC779D8F55E5F7A6893BDBFA38B94CF455E2A3E0E6851014966C90C80E173937CF7
C2372A6FC%7cDA891B3C877030D9765B85CAE6AC82FC3EB6BC7DA10B7335
wiki containing many links for cerification:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/biCertificationInfo-Links
One privious thread:
BI certification tips pls
Hope it helps u,
Regards,
Santosh
Edited by: Arun Varadarajan on Jun 9, 2009 6:53 PM

Associate and professional Level Certification in TECH ED 2009 - Benguluru

Hello,
I have 4 1/2 tears of Exp in SAP ABAP.
I dont have any associate level certification.
Can i attend the professional level Certification in Tech Ed 2009 Banguluru directly??
I searched in net and found list of certifications availble in tech ed 2009.
http://www.sap.com/services/education/certification/teched_2009/bangalore_exams.epx
But I could not see any Professional level Certification exam.(Only Associate Level)
is that means thisis time we can not give certification exam in Professional level?
Regards,
Krishna.

Thanks.

SAP HCM Professional Level Certification-TM

Hi Gurus,
I am preparing for Professional Level certification ..Do we have any reference materials or links that can help much to prepare for Talent Management areas.
Timely help would be much appreciated!!!
Thank you for all of your support.
Regards,
Chandra

Hello Experts,
Any updates regarding this certification.??..Please share your thoughts..
Regards
Chandra

Professional Level Certification - P_ADM_SYS_70

To All BASIS Community,
May I have some guidance for the preparation of Professional Level Certification - P_ADM_SYS_70.
My total experience is 6 Years.
Looking forward for hearing a favorable response.
Best Regards,
Unni.

Seems like this is a professionals level exam. I do not think tha tthey have released any expert level exams yet.
Thanks,
Paul

Material Manegement certification course code

Hi all,
Sorry this time i am not asking any technical question .
I am aiming to have SAP MM Associate certificatiion . But i am not abel to find from SAP site , which course code shall i go for . Based on course code i need to search for respective books on net .
Can anybody sujjest the course code for SAP MM Associate certificatiion and its respective study material codes which i can find on net (eg-TAMM40 , ect.)
Waiting for your kind reply .
Thanks
Rohit

Hi,
For Asscociate Level,
http://www.sap.com/usa/services/education/certification/certificationtest.epx?context=%5b%5bC_TSCM52_64%7cUS%5d%5d%7c
TSCM50, Part 1, Part 2
TSCM52, Part1, part2
Also SAPERP 081, SMI100(Solution Manager).
Hope Help U !
Regards,
Pardeep malik

SRM 7.0 course codes for Associate level certification

Hi
I would like to go SAP SRM 7.0 Associate level certification, kindly let me know the course codes for SRM 7.0 certification.
currently, i have read SRM.1, SRM 210, SRM 200 & SRM 270 are these manuals are sufficient for SRM 7.0 Associate level certifcation.
Thank you

Hi,
You can get the information from ( training.sap.com ).
C_SRM_71 - SAP Certified Application Associate - SRM 7.0 EhP 1 (The one which you asked for)
C_SRM_72 - SAP Certified Application Associate - SRM 7.2.
P_SRM_71 - SAP Certified Application Professional - SRM 7.0 EhP 1
P_SRM_72 - SAP Certified Application Professional - SRM 7.2
I am not the best judge for those manuals. So I can't suggest you on that part of your question.

Control the use of material code

Hi there,
which field of the DB table MARA (or whichever) controls the use of material as sales code and manufacturing code - DISST? Like STLAN of the structue RC29N.
The request is to list all material codes with its "flag" to build a list of 2 columns:
Sales material code >< Parcel code/lower item
Thanks for your inputs
RB

I found it. EXIT_SAPLV01Z_001 does the trick. A package contains many User-Exits, BADIs and enhancement points, so it took me a while to go thru all of them.

In order level no duplication of material code

Hai Guru's
Client requirement: In order level he is entering minimum 100 line items per order.Any duplication of material code came in same order on that time system has to taken to that line iteam and changed the quantity .
01    x      100 quantity
02     y       50   quantity
03     z       80 quantity
when ever the X material come next time in same order i dont want one more line item. If I enter X material code in same order automatically 01 line item has to come .here i will change the quantity as a 150
01    x      150 quantity.
why because its very difficult to find X material in 100 line items.Client strictly telling he dont want second line item as same material X.
This is Standard SAP not possible if anybody face this type of situation before give me the solution how to face it . If any Development requires please tell me the logic.
Thank u
Regards
Sree Sree

Dear Sree
My suggestion is specific to your comments
when ever the X material come next time in same order i dont want one more line item.
If I enter X material code in same order automatically 01 line item has to come .
here i will change the quantity as a 150"
whereby, if you follow the first suggestion, definitely it will work. The end user has just to input the material code and execute. System will automatically go to first line item of that material code.
For example, you have maintained a material ABC in line items 50, 70 & 100 and in VA02, if you follow the suggestion what I have proposed, system will by default, go to line item 50 only, where you can make changes as per your requirement.
On the second suggestion, as you said a sale order contains some 100 line items in which the material ABC is flowing in line item 20, 60 & 90. What the end user have to do as a one time job is that based on material code, they have to sort the data in excel format so that in the excel sheet, you can see for material code with preceding tabs line items 20, 60 & 90 continuously.
Your job is to develop a BDC with just three fields of course, the input data has to be sale order reference. The format can be
Line Item:::::Item Code::::::Quantity
If the end user would like to change the quantity of ABC for line item 60 instead of 20, in the BDC template, they have to maintain the line item as 60, material code ABC and quantity xxx.
Why dont you make a try with the option cited first ??
thanks
G. Lakshmipathi

ECC 6 - SAP Certification Material - Controlling

hi
If anybody has SAP Certification material for Controlling for ECC 6. Kindly send to the E-mail Id - [email protected]

Hello
SAP Certification material is very tough to get.
People spend hundreds of thousands for certification and it is a height to expect the prized material.
However, there could be people who are willing to part with the material. In case, you get it, place it in the forum, so that everyone else can down load it.
Reg

Cost Centre creat at Controlling Areal level or Company code level???

Hi,
I have a doubt,
1. Cost center is created at controlling area level or company code level.
2. Is it possible to create at company code level.
Please update me.
We have company code field in cost center master.
If we update this field, can we use same cost center for another company code also???
Thanks
Partha

Hi Joshi,
Thanks for your inputs.
We create cost center in CO under controlling area. [In cost center master there is one filed company, its not mandatory.]
Question is - If multiple company codes assigned to one Controlling Area, in this case -
Is it possible to utilize same controlling are for multiple company codes.
You tell me if possible, how it is possible?
Thanks
Partha

How to get first level BOM material if I know 4th level material code only?

Dear all,
I have 4th level BOM material only. How to find first level ( finish material) BOM material ?
We can find bottom level material easily through CS11 if we know top level material.
But how to find top material if we don't know ? we know only bottom most material.........
Thanks....

Kishore,
Multiple runs of "CS15" will help you.
Regards,
Prasobh

Material Code for Process Order Settlement document

HI,
When Process Order to a material having Standard Price is settled, the following entry is passed.
Inventory Change A/C Debit/Credit
Price difference A/C Debit/Credit
It is being obeserved that in the line item of FI document for the Inventory Change the material code appears in the Price difference line items whereas for Inventory Change line item the material code does not appear.
I want to know why this happens ?
Regards
Partha

Using warehouse management /WM) :
- Create a control cycle for the component, using LPK1. Here you define if the supply will be specific for the order (when weighing takes place in the warehouse) or for released orders (normallu full packages of components and weighing is done at plant level). Reference to a supply area.
- The resource used in the operation has a reference to the supply area.
- Components have material master views in WM for the selected storage type
Then, when releasing the orders run LP10 - LP12 to generate the Transfer requirements for the raw materials. These TR will be converted to Transfer Orders and Confirmed, so the stock will be moved to your supply area.
Using Inventory Management, none of the above is required. You can use MF60 to move materials from General Storage Location to Shop Floor SLoc.
Regards

Which 'Professional Level' Layout Application

I love Pages and think it is brilliant value for money etc etc. However I'm considering buying a more professional level layout application to make it easier for me to work with professional printers.
So you Pages users out there who have experience of higher end applications like InDesign and QuarkXPress...
1. Which pro-level app would you choose and why?
2. What features will I get that aren't in Pages?
I know this area is for discussion about Pages and my question is slightly off topic. I will be googling but I value the opinions of many contributors here.
Thanks
Ian

I'd vote for InDesign -- it integrates well with other Adobe apps, and is much more "Mac-like" than the versions of QuarkXPress that I've used before (although I can't speak about the most recent releases).
Compared to Pages, InDesign has a lot of features useful in a professional workflow: much finer control over text and type; more flexibility around professional colour printing options; the ability to "link" images and graphics rather that embed them in the document (allowing for very easy updating of changed images in a document); more capable built-in illustration tools; layers capabilities; and various other pro-level features.
But Barbara is also correct that both ID and QXP require substantial investment in both money and time. Unlike Pages, I found that neither were immediately usable without some background reading and training. And even with many years experience with both applications, I find that I use Pages for 80% of my work-related page layout, including a lot of professionally-printed material, just because I find it vastly easier to use, especially if one is experimenting with layout ideas. ID is more capable, but the price is a far more complex UI.
It sounds like the issues you face are not necessarily around what Pages can do, but how it interacts with printers. Given that, you might first try getting more information from what the problematic aspects are that printers have with your documents, and see if they can be resolved in Pages. I wouldn't suggest leaping to ID or QXP unless you need their more complex features, or if there is some critical function that your printer is demanding.

Controlling (CO) Professional level certification material code

Similar Messages

Maybe you are looking for