Controlling Cockpit (COCPCPR) link in Accounting tab (cProjects)

Hi,
How can I have the controlling cockpit (COCPCPR) link to appear in the accounting tab?
I have been able to configure the services for other object links. However, we also want the cocpcpr link to appear under the "Accounting" tab so that a user can use this link to correct cockpit errors, if any, instead of logging in to the R3 system to correct them.
Please advise.

Hi Nk, thanks for responding.
We are on PPM5.0, and have accounting intergration for automatic replication to PS.
The replication works. However, we have the need to visit COCPCPR at times to remove warnings/errors.
I have seen COCPCPR link appear under the cProjects Accounting tab earlier (in some other implementation).
However, I don't see any such link/button in my implementation. We have implemented the object link services by which we are able to get to the object in R3 (in another system). However, the COCPCPR link does not appear under the Accouting tab.
We have PPM and PS on different systems.
Thanks.

Similar Messages

  • Message no. DPR_FIN_GECCO024 Error occurred in accounting - see link controlling cockpit (cProjects)

    Hi, everyone
    I'm integrating PS( which is on IDES system ECC6 PH6) with cProjects( which is on DEV system ECC6 PH6 PPM 5.0). I've done customizing in DEV and IDES. The Controlling Method is Multilevel Controlling (Structure Element, Automatic).
    When I'm saving a project with status 'to be transferd', the warning message appeared and I'm failing to assign PS Project automaticlly. But manual assignment works fine.
    Error occurred in accounting - see link controlling cockpit (cProjects)
    Message no. DPR_FIN_GECCO024
    Diagnosis
    Errors occurred when transferring to accounting.
    System Response
    DPR_FIN_GECCO 024
    Procedure
    Choose the Controlling Cockpit (Project Management) link on the Accounting tab page. In the cockpit, you can create a variant with your Project Management project under Selection Variant Orders Project Management. The errors that occurred are then displayed. If no messages are displayed in the controlling cockpit, they have already been processed or deleted. If this is the case, trigger the transfer again.
    No more messages are displayed once the transfer has been carried out successfully (that is, no errors occurred).
    Here is the problem：
    In this Message, I was told to Choose the Controlling Cockpit (Project Management) link on the Accounting tab page. But actually, I can not find the Controlling Cockpit (Project Management) link on the Accounting tab page. It was missing.
    I don't konw what‘s the problem with the missing Controlling Cockpit and how to deal with this warning message getting automatic PS assignment done.
    By the way, I've done IDES test, cProjects and ERP system were integrated on the same system with RFC destination NONE. And that works fine on IDES, so I guess I've done the right customizing in the ERP system( IDES).
    Best Regards，Yemi

    Hi Yemi,
    Controlling cockpit is accessed to view the error details in the accounting integration. This can be accessed through two ways.
    1) In Project-->Accounting tab
    2) Through tcode - COCPCPR
    You can try the second method to view the error details.
    And coming back to your query on project profile config in PS, as Pramod said, by standard SAP delivers a standard profile in SAP PS for cProjects-->PS integration. You can find the same in the below SPRO path.
    Project System-->Structures-->Operative structure-->Work Breakdown structure(WBS)-->Create Project profile
    Project profile name : CPR0001
    This project profile is used when an automatic PS project is created through accounting integration.
    Hope this helps.
    Regards,
    Ravi

  • Project builder link is not working in cProjects accounting tab.

    Hello All,
    I have a problem in the cProjects accounting tab where when I select the WBS element in the PS project the page opens where the links to the different systems are seen and when i select to the Project Builder:Display WBS element link it takes me to the initial Screen of the ERP systems instead of taking me to the Project Builder transaction code.
    Thanks and regards,
    Lohith

    Make sure the article that you want to share is un-protected from folio Producer dashboard because all articles are protected by default. And other coupkle of settings to enable social sharing.
    I would suggest you go through this documetation here that explains detailed social Sharing instructions http://help.adobe.com/en_US/digitalpubsuite/using/WSf6ef983f54a76485-3d39e50113568f15d7f-8 000.html

  • Error occured in accounting message - Controlling cockpit

    Hi All,
    I have an item / Cproject and a project in PS linked to it. After the role requirement is done, system gives following messages in the PPM system.
    Error occurred in accounting - check the costing in the ERP system  Display Help
    Maintain an activity type for cost/revenue rate R1
    Maintain an activity type for cost/revenue rate ZB_ENG_S_TCAS
    For last 2 messages I know that the activity type assignment to cost/revenue rate is needed. But for first message when I go to correct the entry in controlling cockpit it gives a message - Enter a valid value for the settlement type.
    The settlement rule was created for PS project with settlement type FUL. Still this message is not getting cleared from the RPM system and from the controlling cockpit even after precessing it.
    Can any one please let me know what can be done to solve this?
    Regards,
    Gaurav

    Hi Yemi,
    Controlling cockpit is accessed to view the error details in the accounting integration. This can be accessed through two ways.
    1) In Project-->Accounting tab
    2) Through tcode - COCPCPR
    You can try the second method to view the error details.
    And coming back to your query on project profile config in PS, as Pramod said, by standard SAP delivers a standard profile in SAP PS for cProjects-->PS integration. You can find the same in the below SPRO path.
    Project System-->Structures-->Operative structure-->Work Breakdown structure(WBS)-->Create Project profile
    Project profile name : CPR0001
    This project profile is used when an automatic PS project is created through accounting integration.
    Hope this helps.
    Regards,
    Ravi

  • Hide Accounting Tab in CProjects

    Hi All,
    I want to hide the "Accounting" Tab in CProjects, depending on user authorizations.
    I tried to realize it with BADI "DPR_DETAIL_TAB_CTRL".
    Unfortunately in this BADI I can only hide tabs on detail level e.g.
    tabs for tasks, phase etc.
    But how can I hide tabs on a higher level like the "Accounting" Tab?
    Thanks in advance.

    Hi Hans ,
    You can try with the Badi DPR_DETAIL_TAB_CONTROL, it can hide the Tab dynmically.
    See the example codes for details:
    Sets a detail tab Private (invisible) or Changeable (visible)
    Do not use Mandatory or ReadOnly
    Example: Set Document Tab invisible (Private) for Project
      CASE cs_property-association.
        WHEN cl_dpr_api_co=>sc_association_documents.
          CASE lv_object_type.
            WHEN cl_dpr_co=>sc_ot_project.
              cs_property-property = cl_dpr_fc_property=>sc_private. "Private: No 
    Kind regards,
    Zhenbo

  • CProjects "accounting Tab" role/resource assignments missing

    Hi, I have assinged the Project Taks with roles and resources but when i navigate to the "accounting tab"  and expand the Project structure , the assignments are not visible, However the costs and rev related to the assignments are updated in the back end ( ECC PS).
    Is there some thing which would stop the display of these assignments in the "accountig tab" ?
    thanks
    Edited by: ankushkap on Feb 18, 2011 5:29 PM

    Hi,
    If you are working in Portal than Claer the Cache and Re-login again.
    Thanks
    Arbind

  • Problems with accounting integration cProjects

    Dear Sirs,
    I have some problems with accounting integration between my cProjects 3.10 and my ECC 5.0 system. I have followed the steps in the configuration guide as good I as can. However when I create a project, and go the accounting tab I get the following error:
    The project is unknown in Accounting
    Message no.
    DPR_FIN_GECCO006
    Diagnosis
    Etc..
    In the Cockpit for Controlling Integration I can see the following error at the time the project is created, and a new similar error is created when the status is set to released – replicated.
    No company code could be determined. Message No IAOM_CPROJECTS001. 
    In this message there is a reference to the fact that the company code can be set in the assigned model order for CPR1. I have created such a model order with a reference to company code 0100 for CPR1. However this does not seem to do the job.
    I seem to be stuck, as I have tried every possible and unpossible lead to get any further. Any input for someone with the knowhow is highly appreciated.
    Best regards,
    Jørgen Ruud

    Hello Jørgen,
    It sounds strange, normally after create a model order and assigned to the scenario CPR1, then the determination of company code should work.
    logic: CPR1 -> model order -> company code
    Would you please try the note 875275, if it can help.
    In case that it does not help, you can eithter use the Badi method  to set it hardly, or create a customer message to let SAP check it.
    name of Badi DPR_FIN_GECCO_ATTR
    code like following:
          ls_attribute-data_element     = space.
          ls_attribute-value            = '1000'. 
          ls_attribute-field_name_orext = 'BUKRS'.
          ls_attribute-fldname_receiver = space.
          ls_attribute-struc_name_copa  = space.
          ls_attribute-field_name_copa  = space.
          ls_attribute-ext_attr_name    = space.
          ls_attribute-ext_attr_value   = space.
          INSERT ls_attribute INTO TABLE ct_attributes.
    regards!
    Zhenbo

  • HT204053 How do I link my accounts I have 2 accounts and can't sync my IPod with ITunes

    How do I link 2 accounts in ITunes Store so I can sunk music I purchased?

    You can't link two accounts, all content is tied to the account that downloaded it and accounts can't be merged nor content transferred between them.
    You can have more than account authorised on your computer's iTunes via the Store > Authorise This Computer menu option and you should be able to sync content from both to your iPod. If you redownload and account's purchases (or use iTunes Match or automatic downloads on an account) then you might tie your computer to that account for 90 days : http://support.apple.com/kb/HT4627 - so you won't be able to do those three things on another account until the 90 days have completed.
    To sync music, connect you iPod to your computer and select it on the left-hand sidebar of your computer's iTunes (you can enable the sidebar via option-command-S on a Mac, control-S on a PC), and then use the Music tab on the right-hand side of the iTunes screen to select and sync your music to your iPod.

  • Display Costs on Accounting Tab in Company Code (object / Project) curerncy

    Hello Forum Experts,
    We have this major issue whereas teh costs on the Accounting Tab are shown in Controlling Area Currency.
    It seems this is the standard cProjects behaviour.
    What changes / enhancement do we have to implement to ensure that the costs are shown in company Code Currency.
    For example: Controlling Area Currency is USD.
    There is a branch of teh company operating in Gemany - it has its own company Code. So they create projects in Germany and would expect to plan and see teh costs in cProjects in Euros instead of USD's.
    How can we solev this problem. It is quite amjor and most probably the foreign comapies will not use the system as it amkes no sense to them to plan / see costs in another cuurency than their own...
    Thank you,
    LT

    Hi LT,
    The costing in cProjects is always carried out in Controlling Area currency.
    Make modifications in the following Class to display the costing in cProjects in Company Code Currency  :
    1) Class: CL_GUI_EASY_COST_PLANNING
    Method: CONSTRUCTOR
    Here set Object currency "1" as Default .
    2) Class CL_R3_OLR3_INTERNAL_ORDER
    Method GET_REPORTING_DATA
    Regards
    Sejo

  • Costing data in Accounting Tab

    Hi,
    When I create a task and have a role assignment, it does calculate the costing based on rates defined but as soon as I assign a resource to the role the cost data goes away.
    Can anyone help me understand this costing process? It works fine at the task level and role level as far as resources are not assigned to them.
    We need to assign resources to use CATS for time booking. It seems I'm missing something here.
    Pl. help.
    Thx/DS

    Hello DS,
    As I have mentioned earlier there are two ways of doing Accounting in cProjects, Task based and role based.
    For Task based accounting you need to define Cost / Revenue rate for Task type in customizing. When particular task type is used while defineing a task, in Additional data tab of that task you will get this default cost / revenue rate. Also at project header lever on Additional data tab you will require to define Org. Unit.
    There are further two ways to do Role based accounting.
    a) Without staffing: Here in customizing you need to define Cost / Revenue rate for particular Role type in define project role type. So when you create a Project role using that project role type, you will get this default cost revenue rate in Costing tab page.
    b) With Staffing: Here in Define project role type you need not define Cost / Revenue rate, instead you define the same for a Resource in tcode : BP. So whenever a Project role is staffed with the Resource, accounting is done.
    For both scenarios you need to define Org. Unit as mentioned earlier.
    Hope this clarifies your doubt.
    Regards,
    Niraj

  • Need 'Edit' on 11g report to link to Criteria Tab instead of Results Tab

    In Answers 10g, a user had the option to 'Modify Criteria' when editing a saved Answers Report. Now, in Answers 11g, when a user clicks 'Edit', it first runs the report (sending off the logical sql to the bi server immediately) and then you have to switch the results tab - the report is run immediately upon opening.
    I am currently using Noetix Views on top of Answers for a transactional db and we are running into major CPU issues (I run a report with a single view and CPU climbs to 100% or crashes the db all together). I need to be able to edit filters, columns, etc in the criteria tab without running the report in my Answers 11g. What I am doing now is clicking 'edit' and quickly switching to the 'results' tab hoping that maybe I can beat the logical sql on its way to the bi server (but never do).
    Is there any way to have the 'Edit' option link directly to the Criteria tab without sending the sql off to the bi server?
    All feedback is welcome - Thanks!

    I wasn't able to find a setting within OBI 11g that would control this functionality. However, I did find a javascript tweak that accomplishes the effect you want.
    I'm going to assume a Windows-based OBI system, but the file paths should be similar for *nix as well. There are two javascript files that contain links to the Analysis editor. One controls the "Edit" link in Catalog Manager and the other controls the "Edit Analysis" menu item in the Dashboard editor. You probably want to modify both.
    [OBI11_INSTALL_DIR]\Oracle_BI1\bifoundation\web\app\res\b_mozilla\catalog\actionhandlerimpl.js
    [OBI11_INSTALL_DIR]\Oracle_BI1\bifoundation\web\app\res\b_mozilla\dashboards\dashboardeditor.js
    If the application has already been deployed to WebLogic, you need need to perform the same modifications on these paths.
    [OBI11_INSTALL_DIR]\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\b_mozilla\catalog\actionhandlerimpl.js
    [OBI11_INSTALL_DIR]\user_projects\domains\bifoundation_domain\servers\bi_server1\tmp\_WL_user\analytics_11.1.1\7dezjl\war\res\b_mozilla\dashboards\dashboardeditor.js
    1. Make a backup copy of each original file.
    2. Open the javascript file in a text editor.
    3. Search the text file for the string "&Action=results" and replace all instances with "&Action=criteria".
    4. Save the file.
    5. Clear your browser cache and try the "Edit" link again.
    I highly doubt Oracle will support this modification. You may need to reapply the changes after an Oracle patch, but it should help with your performance issues.
    Jeff
    Noetix

  • Safari wont let me open links in new tabs anymore? Please help!?

    On my Macbook, I'm using Safari as my browser.
    Everything was fine until this morning; suddenly Safari will not give me the option of opening links from one page in another tab in the same window.
    For example, if I'm browsing on EBay and want to open a search result in a new tab of the same window, usually when I would right click on my track pad or magic mouse, it would say "Open link in new tab" or "Open link in new window". However, now when I right click, it just says, "Open link" "Open link in new window" and "Copy link".
    I haven't changed any settings or anything on my Macbook whatsoever in the last 3 hours (at least that I'm aware of). Can anyone please tell me how to get this back to normal?
    Also, it seems that when I right click anywhere on a page, I only see the options "back" and "reload" whereas before there was "view source" etc.
    Please help!
    xx0

    Hi,
    From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
    From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
    Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
    Since you are running Snow Leopard, *make sure Safari is opening in 32-bit mode, not 64*. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Also, (in that same window) *make sure Safari is NOT running in Rosetta.*
    

Web pages now include a small icon or 'favicon' which is visible in the address bar and next to bookmarks. These icons take up disk space and slow Safari down. It is possible to erase the icons from your computer and start fresh. *To delete Safari's icon cache using the Finder, open your user folder, navigate to ~/Library/Safari/ and move this file "webpageIcons.db to the Trash.*
    If Safari still won't let you open links in new tabs, go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If it's a successful launch, then that .plist file needs to be moved to the Trash.
    If your forum profile is correct (10.6.1) go to the Apple Menu/Software Updates ...
    Very important to keep your system software up to date.
    If you install the 10.6.3 update make sure and repair disk permissions.
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Carolyn
    Edited by: Carolyn

  • Changing account receivable in accounting tab

    Dear All,
    I would like to change GL account in the account receivable field on accounting tab of a customer business partner master data. The customer has had some transactions booked in general ledger, is it possible to replace it with other AR account ? I have actually created GL account per customer group. I use UDF and FMS so that each time when select a certain customer group, the GL account automatically filled in the field. Please help. Thanks
    Rgds,

    Once the Business Partner (BP) is posted with entries you cant change.
    But You can create another BP and you can transfer the amount by passing the journal. You should link the new BP to Old BP thru Payments Consolidation. So that only,  we can get the pending invoices at the time of Incoming/Outgoing payments.

  • Error while linking dms document with cProject.

    Hi,
       I am encountering an error while try to link the document in cProject under SAP DMS tab. The error message is
    Link Not Possible: The SAP R/3 DMS document info record contains orig (Message number 26 000).
    Pls help me out to solve the this issue.
    Thanking you.
    Regards,
    N.Ramesh

    Hi,
    There is no link between SAP R/3 and SAP DMS server.
    Please be create for RFC's through SM59 tcode.
    Regards,
    Srini Nookala

  • "Open Link In New Tab" option not working.

    Last night I updated Firefox and now I am unable to use the "Open Link in New Tab" feature from the file menu or from the right-click menu. The only way I can open a link in a new tab now is if I control-click it.

    Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
    There are a couple of places to check for the Ask toolbar:
    * Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
    * Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Maybe you are looking for