Controlling Data source (0CO_PC_PCP_10) Extraction setup
Hi Guys,
I want use controlling data source 0CO_PC_PCP_10 for cost estimate itemization report. and the data target is 0COPC_C10. FIRST TIME I AM WORKING ON CONTROLLING SIDE , please tell me the steps how to setup the data source in R/3 side, and how to activate the data source in r/3 side
please send the steps asap , i will assign the full points.
thanks
kk
Hi KK,
Check these links if they r useful...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
Regards,
Ram.
Similar Messages
-
Single Standard data source which extracts material master and vendor master data
Hi all,
I have a client requirement where user wants to view material master and vendor master in a single report. Is there any standard data source which extracts both the data together..
Thanks!
ArvindHi,
Two are different master info objects and can't get them from one data source.
think about multi provider or info set on two master data objects to club them.
Info object - 0MATERIAL and data source - 0MATERIAL_ATTR
Info object - 0VEDNOR and data source - 0VENDOR_ATTR
Thanks -
Data source and Extract Structure
Hi all,
I have a doubt on Data source and Extract Str,
when i used one info cube with some char and kf's
after i did extraction shall we change the extract strcuture prequently other wise better to use all the predefined extract strcuture hide in data source.
if i hide in datasource after extraction i want to use some of hide fields, so we can use it? if we can use how can we extract data for that specified hide fields to bw side.If you wont to create the genaric data source at that time
you can create cube with some char and kf.
after extraction you wont to modify the structure ? if you mofify
the structure then replicate the data source and delete the data
and upload the data from r/3 to bw.its not correct way every time modifying the
structure.if you put hide means that fields are not coming to
bw side.if put modify the hide field ,first goto rsa6 edit data source
remove the hide check box and save after come to bw replicate the data source
delete the data and load the data (if you wont full data for hide field)
if you dont load full load means only available upto data only what ever field you modify the
hide to unhide, -
Enhancing the standard Data source without deleting setup tables
Hi all,
I am in the the Support Project. My requirement is I want to Enhance u201C2LIS_13_VDITMu201D LO- data source with two fields without disturbing the delta.
Please suggest me how I have to do this.
As Per my Knowledge ,
1. we have to delete setup tables
2. Enhance the data source & re populate the setup tables.
3. Delete the data in the cube & add the two new fields in the cube & repopulate the cube with new Initial .
4. after that delta will be enabled through job control.
But this process is not suitable for our requirement because delta was enabled long back it is going very smooth till date, I donu2019t want to disturb that process.
So please suggest me is there any other procedure to do this.
Thanks,
Kiran ManyamHi,
If historical data (loaded earlier in to BW) are not required for the two enhance field, then it is not required to deleted the setup table and reload them to BI.
In this case simply you can follow the following procedure.
1. Enhance the fields, and update the transfor structure(to unhide these fields). In BI update the required data target with respective IO. and in exit populate the enhance fields. No need to disturb the delta
2. Replicated the DS in BI and do the mappings in tranformation.
Here the existing delta is working, and you will be populating the two fields in the exit only.
Thanks,
Jugal. -
No data in R/3 data source after extraction!
Hello All,
i am extracting the data from R/3 source system ( 4.7 ides system).
after succesffully transferring the data source and replicating it to the BW, i had created a infocube and scheduled the info package so that R/3 data source data gets uploaded into the Info cube created.
after scheduling in the header tab of monitor screen i found the error messege as "no data in R/3 data source, check your data source in R/3".
is it that data does not exist in R/3 Business content data source or is that data has not uploaded into BW?
can nay body here thorw some light onto it?
RaviHi Ravi,
Please check the tables associated with your datasource and look if the data is available inthe respective tables.
You can also check the extracted records in T.code RSA3 in R/3 for your datasource.
Hope it helps!!!!
Regards,
Amit -
Data Source 0PM_OM_OPA_1 extraction strategy
Hi Experts,
Could any one please guide me on Extraction strategy of Data source 0PM_OM_OPA_1
Thanks in Advance,
Nityaclosing this thread
-
SM37 - "pause" V3-update job while importing data source and extract struct
Hi
Insted of deleting an hourly schedulated V3-update job and the recreating it (after a import of a extract structure and a data source) I came to think about whether it is possible to, kind of, pause the job that I otherwise would delete and recreate.
Is this possible some how?
My thought:
1. Find the job in released status.
2. Select the job and change it (top menu Job-->change)
3. Change the scheduling to some day in the future
4. Change job status from released to scheduled
5. Import the extract structure and data source.
6. Change the schedule job back to hourly run.
7. Now the job should run on hourly basis again....
By the way: what do I import first, the data source or the extract structure?
Thanks in advance and kind regards,
TorbenWe did delete and recreate...
-
Data source 0CCMS* extraction failed
Dear Expert,
I am trying to extract the following data sources from our ECC6.0 system.
0CCMS_ASR_DATA
0CCMS_DSR_DATA
0CCMS_WEBAS_STATREC_DATA
but the error message "Error 6 in function module RSS_PROGRAM_GENERATE" always come up once the extraction process started.
Please your help on this.
Thanks and Regards,
BudiThe problem is that this datasource are a kind of exotic
datasource-type. There are Segmented datasources. That is, if you look
at their extract structure e.g. CCMSBI_DSR_EXTSTR the datatype of the
fields cannot be interpreted correctly by RSA3.
You can check them in transaction RSA2 and you will see that
both of them are of Type SEGM, therefore it is not possible to
test them from RSA3.
regards,
Colin |Moloney -
Any data source to extract material price or Standard cost history
Hi All,
Currently we are using data source 0CO_PC_ACT_05 for material price extraction.
But it seems this will only extract current period, previous period and previous year last period.
But my requirement is to extract the material price history for any old periods.
Do we have any table from where we can extract this details? or any standard data source through which we can extract this details?
Thanks,
Muruganand.KHi
Check MBEWH (Material Valuation: History)
Thanks
Kalyan -
Data source not extracting Noted Items
Hi All,
I want to extract records from fbl3n and Noted Items.
I feel 0fi_gl_4 extracts from the same. My issue is it doesnt pick the Noted Items.
I read and came to know Note number 411758 helps to bring this, but our ECC sustem is in 617 component and we are getting
error message as SAP Note 0000411758 cannot be implemented.
Can you help me with New SAP Note or do I require to do any config?
Regards,
VenkateshHi Kiran:
Take a look at SAP Note 609847 - "BW: missing info for Info sources 0SGR, 0SCN, 0CGR".
Regards,
Francisco Milán. -
How to setup Events under Data sources in LBWE
Hi,
I need to know how to setup the events for Shipments data source in LBWE,i activated the data sources and extracted the data but there is no Events for Those shipments data source under application area 08.Other application areas like 11,12...those are having the events.
Why the application 08:Shipment don't have events??How can i assign the events???Can you guide me??
Thanks,Hi,
Oh..Great Help..
May be any one can you share your ideas???
Nick in your system also don't have events for 08 Shipments??
and also i have one more question :In my client they have two clients in R/3, one for customization and another one is testing,but when i changed or activated my DS those are not effected in testing system..
How can i capture those changes into testing client??any one have any idea..as per my knowledge DS are client independent right so automatically effects those changes into another clients.but in my case it is not happening??? Thanks -
Data Source Filter Error - 0CO_PC_PCP_10
Hi all,
I am facing a problem in the data source 0CO_PC_PCP_10. I have configured a filter of date (KADKY) to select a range of date, but during the extration the filter doesn´t work. The selection fetch all dates instead of fetching only the range selected.
Does anybody knows about this problem?
Thank you,
GustavoHi Gustavo,
I am assuming that you have changed the value of SELECTION = 'X' in the table ROOSFIELD for making the field as selection enabled.
I am sorry to break it to you that it will not work because in the extraction FM for this datasource the extraction is done on table KEKO and below selection criteria is hard coded in FM.
So even if you make other fields as selection possible it will never work.
Unless SAP releases a patch/Note to modify the FM SREP_COPC_PCP_10 and make it more field selection enabled.
I think it is better to use KADAT if you want to use selection criteria and then manipulate your data in BW further using KADKY.
Please let me know if there are any questions.
Thanks
Amit -
Report painter -output parameters,Data source,Extract parameter, report
Hi expert,
1)What report painter -output parameters,Data source,Extract parameter, report mean for and what are the difference?
2)I have create new report painter and transport to Test server using T-code:GCTR and I find that the T-code always point to old report. As I had check the SE93 the D_SREPOVARI-REPORT is point to report group.Why this happen?
3) Does creation of new report or modification of the report always need to select the extraction option so that it will able to display the relected changes? Because, I have done modification on the report but it is not reflected the changes even i save until i have to create the extraction is able to display the report but every time i run the report need to select the extraction with option to choose new extract or old. Kindly advice how to save and create the report painter and save will display reflected result .
Please helpHi BR Christian,
Thank you for the prompt reply.
I have few querys as below:
1)Do we every time create new report by copying the existing report painter need to select output parameter, data source and extract parameter in order to be able to display the new report?
2)when modify existing report painter and save it do we need to select output parameter, data source and extract parameter in order to be able to display the modify report correctly?
3) What are the different between right click copy the report inreport painter compare with create report painter with copy GRR1?
4) What are the T-code for modify the report group?
5) When I create a new report with the right click copy in GRR1 and modify the report painter column only and everything remain the same just the report name different why when execute the report it always appear in the selection screen with report button which have option button to select the 2 version of report which one is the destination report that I copy from and one is the new report? How to set the report when execute will only display the new report only without need to select the option with just new report only?
6)For transferring reports you can use GR37 (export) and GR38 (import) can be use to transport from one client to another client? What is difference between GR37 compare with GCTR?
7) If I use GR37 and GR38 it is mean no need to create the transport request which as usual we create transport se10?
we can directly import to another client ussing GR38?
8)When we create a new report with copy with the existing report with just modify the report colunm and the report name difference only what are the setting example: report,report group need to be selected to be include to export/transport to another client?
9) What are the difference between library and report group?
10) Can we set Se93 to execute only report not report group? How?
11) when using GR37 to transport it is also include the report group,library and the particular report?
12) Can I include the variable in the column header to display fiscal year which I have selected from the selection screen?
How and which variable should i use?
please help.
many thanks
Edited by: KH on Jun 18, 2011 6:52 AM
Edited by: KH on Jun 18, 2011 6:55 AM
Edited by: KH on Jun 18, 2011 7:06 AM -
Missing Source in Generic Data Source in CRM
Hi All,
Currently I am having an issue with a Generic Data Source in CRM. The consultants have actually build a data source by referring to the transparent table. I am not too sure how he did it.
Whenever I open up the transaction RSO2 to look at the data source, the "Extraction from DB View", "Extraction from SAP Query" and "Extraction by Function Module" is totally blank.
How would I know how does the consultant setup this extractor? Is there any other program that will have some kind of code to pull it from which transparent table?
Thanks.Hi David,
Your datasource is based on "extraction using Function module". You need to check the function module SMOX3_GET_DATA in se37 and find the tables from where the data is fetched.
Also check this blog by Roberto to find the table and fields: /people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
Bye
Dinesh -
Changing Physical Data Source in DAC
I need to extract data from DEV2 instance of Siebel instead of DEV1.
So i have change the database name, user name and password under Physical Data Sources tab under Setup for the SEBL_VERT_80 datasource.
I have generated parameters and rebuilt the execution plan. However when I run the execution plan some tasks fail and I notice in the session log that the ETL tasks are still trying to extract data from the DEV1 instead of DEV2.
Can someone please let me know what I may be missing? How can I make DAC run ETLs against the DEV2 database?
ThanksMy first thought is that the connections need to be reconfigured in another place.
Have you changed the realtional connections in the Informatica PowerCenter Workflow Manager?
Some worfklows might be configured to retrieve database connection information from there.
- In Worfklow Manager connect to the appropriate repository
- Select "Connections" -> Relational
- Review the connections specified.
- Austin
Maybe you are looking for
-
I have looked but I don't even really know what to call this. But I can reproduce it everytime without fail and I don't understand. Steps to Reporduce Load up Safari (or chrome, whatever it doesn't matter, those two browsers have the excat same probl
-
Trading scenario with AED (Tax procedure- TAXINN)
Hi, I've a query. My client procures a material from a vendor, which he imports. When he sends invoice to my client the details are as follows- Base value- 8440 (Including BEDAEDEcsee+SEcess) VAT 4%- 338 Total invoice amt- 8778/- But vendor paas
-
I have a 6gb Zen Mozaic and I am having trouble finding videos that I can put on the player. I looked at the format of the sample videos that came with the player and they are .avi format so I tried to upload a few other .avi video files to the playe
-
XCrawlerException on Index creation in TREX
Hello All, We're using EP6 NW04 SP9. TREX 6.1. Database Oracle. I've created an index for the KM from 'Index Administrator', that doesn't work. It's a very simple index, called <b>MyIndex</b> and searching only a folder, /documents/Public Documents/h
-
i am using my MS Access 2013 to connect with my oracle database. I created the odbc link and successfully have connection test pass. However i can;t link the database with my MS access. When i am using different software (mapinfo), i am able to conne