Controlling Display size

I have created a Flash swf movie and I want to control the
display size for the display on the output. If a user stretches the
viewer frame all the work area on the sides displays. The view size
I want to display at is 550 X400. Any help with this would be
appreciated.

There is no way to do this that I'm aware of. The TOC and
index are linked together in HTML Help and in any case the tri-pane
can't be moved from the left.

Similar Messages

Windows 8.1 forgets dpi / display size settings for one monitor on almost every reboot

I use TV 32" with 1920x1080 and cintiq 13" with 1920x1080
when I boot my PC the resolution is fine but DPI is wrong.
In smaller monitor It's look like DPI is higher than the bigger one.
I already set dpi to be the same (smallest 100%) but it's not work until I do something to change display setting.
It's really annoy me. This problem is not happen when I use windows 8
Only solution I found is turn off
"Turn on fast start-up".
When I do that It's boot like what I want. every monitor is the same DPI.
But it'll make my boot time longer.
It should be just start up windows and use the same dpi from the start.
So I think this problem is a bug in windows 8.1
Best regards

Thank you for reply.
I've already used the latest graphic card driver. But It's won't help this issue.
In registry editor. I check those variables then value of them is already set like that blog suggest.
So , it look like when windows start-up(with fast start-up) It use something like
suggest value for different monitor size instead of what I set in control panel. But when I turn off fast start-up windows use my setting value.
And I think there are a lot of people who got the same problem as me.
Here is an example.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-desktop/windows-81-forgets-dpi-display-size-settings-for/385cb615-d699-47f8-8c12-717e3364c866

Controlling screen size with DVI to HDMI

I have a Mac mini attached to my 50 inch Pioneer plasma via DVI to HDMI cable. I also have an Apple TV, but I brought the Mac, because I can use iTunes to play video playlists (The Apple TV can't do this yet). And for the most part, the Mac/Plasma hookup works excellent. However, once in a while, when I switch HDMI inputs, or the Mac goes to sleep and awakes, the screen gets off 'kilter' (e.g., the desktop overshoots the borders of the TV). The only way to get it back to normal again, is to power everything off and unhook / rehook the DVI to HDMI cable. I would use VGA, but the screen looks clearer, brigher with HDMI, and I the videos through iTunes fill the screen better. I tried the Gefen DVI detective, but that didn't seem to work. Is there anything else I can try ? I see the Res X program listed here in many posts, but not sure if this would help and not sure how to configure to solve issue....Thanks.

It sounds to me like it is the TV that is failing to hold onto a setting, not the Mac. Can you find evidence of this? There must be various modes controlling the size/aspect ratio of how video is displayed on the plasma. I would check the settings before and after the problem occurs to see if, in fact, the setting is changing under the conditions you describe of either the Mac waking from sleep or the HDMI input on the TV being switched away from and then back to. If you can confirm it is the TV that is behaving this way, then you need to find out why, possibly taking the matter up with Pioneer.

How to control the size of live data in Coherence?

How to control the size of live data in Coherence?
See the following statement:
Pause times increase as the amount of live data in the heap increases. We recommend not exceeding 70% live data in your heap. This includes primary data, backup data, indexes, and application data.
--Excerpted from http://coherence.oracle.com/display/COH35UG/Best+Practices

In any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded.

How to control the size of SVG images in epub files?

There is unfortunately no support for SVG files in InDesign.
Most of my images in jpg convertes nicely, but the small ones do not.
Therefore I want to use SVG files which I have created in Illustrator.
But how do I set the size in the epub file? Right now, whatever I do, they come out too big and I don't know how to control the size.
Is there a program, like Sigil or other, that can place the image for me - I'm no html wizard you see....

In any Java program, it is good practice to make sure your live objects leave some room in the heap for "scratch space." Without this, you will spend too much time in GC, and, in the worst cases, run out of memory. In the general case, you can see how much live data your application requires by looking at the heap used after a full GC's. For Coherence, you should ensure that live data, as you say, is under 70% of the maximum heap size.
Coherence provides you tools to help enforce this policy. [http://coherence.oracle.com/display/COH35UG/local-scheme] describes how to size limit your cache. By implementing an eviction policy, you can control what happens when a size limit is exceeded.

Display Size of the Visual Admininstrator

I have an interesting problem - the display size of the Visual Administrator in one of my Netweaver systems has opened very small - I cannot stretch it any bigger. In all the rest of my systems the Visual Admininstrator opens full screen (we are AIX-UNIX).
I think I can probably solve the problem by rebooting the server but I would like to know if there is any way to control the size of the Visual Admininstrator? Is there a configuration file or something similar?
Thanks
Patrick

Hello Patrick ,
I have no idea how to resize the visual admin.
But the easiest thing to do is to install the visiual admin locally on a windows desktop.
Be shure you have installed jre 1.4.2 on your windows desktop.
Then copy the complete /usr/sap/<SID>/DVEBMGSXX/j2ee/admin
directory to your windows desktop.
Just doubleclick on the go.bat and the visual admin starts.
Create the desired connections and youre finished.
Have fun,
E.ITS-BAsis

HT3142 Display size is too large on yahoo mail

My display size is too large on yahoo mail page only (page I need and use most). How do I correct it, please?
Changing the display selections from system preferences is not working.

There may be a control within the application you are running Yahoo.
Which browser are you using online to access Yahoo?
In the View menu bar of the open application, there may be a choice
to change the size of the display content in the window itself, check.
Some of these use a keyboard command, should the setting go to
Full Screen, you'd need to know the default or escape combination
of keys to restore the application's window to a standard size. This
kind of inside-application setting is not reflected System Wide.
Since I don't know the browser, (as I have five, each is different)
I can't recommend a keyboard combination to re-size the open
application's view or window setting. They can be non-standard.
But that likely is where you'd have to change it back to normal.
PS: Snow Leopard is Mac OS X 10.6.8.
(Tiger is OS X 10.4.x)
Good luck!

Wrong ibook display size

to the forum:
I just purchased a second hand ibook. It came
with Tiger installed and no original system disks.
(The CPU is a 700 MHz PowerPCG3 and there is 640MB
of ram) Although I didn't do much with the machine
under Tiger, everything seemed to be working fine.
In particular, the whole ibook screen was used.
I got the original system disks from Apple and
proceeded with Software Restore. That erased Tiger
and replaced it with earlier system software.
I can boot into system 9 and system 10, BUT
the display (under both systems) is about the size
of the 1984 mac display (surrounded by a large black
border). Otherwise everything is working.
In system 9, the system profiler shows the
display card leading to display(2) which
has a screen size of 640 by 480. The monitor
panel in the control strip shows the
same thing along with "color LCD (1) 1024 by 768".
I don't know why two displays are shown.
In system 10, I can't find anything about the
display size, but it may be at the bottom
of a window I can't see (because of small screen).
Any help would be much appreciated.
Roger Purves
PowerMac G4 1.25 GHz Mac OS X (10.2.x)

You're Welcome Roger!
"... the 10.2.8 combo did help. In OS X 10.2.8, the display is now the right size."
Yippee!
"... booting into System 9 still leads to the small display. Perhaps I should start a new topic in the System 9 forum."
It's been so long since I used OS 9, I couldn't even begin to troubleshoot it!
You're correct, there are some very knowledgeable members in the OS 9 forum, but eww has a handle on it here too.
"...you are running 10.3.9 and 9.2.2 on one of your machines. Can you boot into 9 on that machine? And does Classic run also?"
Yes and yes. But I can't remember the last time I booted into OS 9, or started Classic.
I'm a total OS X junkie. After installing Panther 10.3.x, I never looked back!
I'll take the liberty of anticipating your next question though
My HD is not partitioned.
And Thank You, for extending the courtesy, of awarding in Discussions, as this is not a requirement, nor mandatory, but is much appreciated!
ali b

Controlling the size of a calendar

Can someone tell me how I can control the displayed size of an APEX calendar region? I'd like to make the calendar bigger than the default size but I can't seem to find a way to do it.
Thanks for your help,
Dale

Hi,
In livecycle, select the masterpage node. In the page tab, specify, for instance, 13in in the height property. Put the object at the end of the page, and mark them as visible but don´t print. In acrobat chose "none" in page scaling property (or print with a print button inside the form and control the scaling property form there).

For which display size is Labview 2012 optimized?

Hi,
I have a lap top with a high resolution (1920x1080). After I installed Labview2012, on some of the dialog boxes, ex. Tools->Options (see attached image) not all text is shown completely.
Also, when I opened VI designed for a lower resolution display I get overlapping on labels and controls.
Can anyone tell me if this is due only to the display resolution or also the Labview? And to what display size is Labview2012 optimized?
Regards
Solved!
Go to Solution.

It looks to me like you've set windows fonts to Large, casuing labels to increase in size.
From LV 8(?) to 2009 (or is it a windows thing?) the standard font increased from 14 to 15 causing some mess in block diagrams.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Controlling window size and positioning in RH8 WebHelp

Evening all,
I've seen a post before about controlling the size and/or positioning or RH WebHelp windows, but I haven't been able to find it again.
I'm generating WebHelp in RH8 and at this point am using the default skin and whatever default tri-pane and CSH windows RH chooses to use.
Question is: how do I control the size and position of these windows? Or can I?
I suspect they're set in a .js, but don't know which one. I know I can create new windows, and if I recall correctly, I can make one for CSH and one for the classic tri-pane help display. Is this how folks typically control the windows used to display RH content? Or do they muck about in the original .js files?
Or, and this is the more likely, am I just being too anal-retentive about this and I should just let RH do its default thing and not worry about it?
Thanks - I'm just a bit confused here,
Patrick

Hi Patrick
If you aren't working with a programmer to connect your WebHelp to an application, you really don't have much control over the placement and attributes that are used.
Note that when you create a project in RoboHelp HTML, you have an ability to create a WebHelp window with the desired attributes. But really, all that does is configure the way a window will open if you are using something called the "WebHelp API" to open topics. As you stated earlier, JavaScript is actually used by the API to open the window.
Cheers... rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How can you change the display size on the task bar

how do you change the display size on the task bar

If, however, you want to change the size of the display of the menubar, meaning make the icons and text larger, there is no way to do that directly other than to change the resolution of the screen.
You can change the as-viewed size of that temporarily by using either -
• Mouse zoom - if you have a Magic Mouse (Apple wireless mouse), hold down the Control key and use the scroll up and scroll down finger gestures on the mouse.
• Zoom - go to System Preferences > Universal Access > Seeing and turn on Zoom. You can also use the noted keyboard shortcut to enable/disable this Zoom feature.

Display size query, + quality loss from iMovie originals

Learning to work the iDVD process, but what is the word on a foolproof sizing method, such that the thing will display OK on any TV? I don't see any way to restrict display size in iMovie, and what good is the TV Safe check, if you can't control the display size?? Also is quality loss inevitable? I'm compiling the DVD from separate files, less than 1 gb ea. I used "full quality" Quicktime compressed versions from the original iMovie file (which look fine in QT); then pulled those back in to iMovie, then shared to iDVD. One of the files looks fine encoded, but the other has weird sizzling-oil standing wave artifacts, even on still scenes from jpegs. Looking for help/comment/expressions of sympathy
Thanks,
John
Houston TX

Hi v
Quality of the DVD-disc depends on several things.
• Highes Quality isn't Top - better is Best Performances (up to 60 min movie)
confused naming - in iDVD'08 there is Pro Quality AND I like it.
• Media brand - I use Verbatim
• Type: DVD-R my choise no DVD+R or +/-RW
• I save a Disc-Image and burn this at an as SLOW speed as possibly (eg x1) with Toast™
(Disc Util tool can also do this)
• I DON'T USE the function Share/Export to iDVD from within iMovie - IT IS DESTRUCTIVE !!
Just drop the movie project icon (with a Star on it) into iDVD theme window - then iDVD do the
rendering and so much better. Especially if there is photos in the movie.
• Free space on internal (start-up) hard disc - should be about 25Gb when all material is imported
and structured. This for iDVD to work with - iDVD can't use an extern hard disc as scratch.
(less than 5Gb - result is most probably of no use at all)
This is what come's first to my mind.
Yours Bengt W

In previous versions of Firefox I was able increase the display size on Flickr which remained unless I altered it again. Does any one know how to do this on Firefox 4?

Question
In previous versions of Firefox I was able increase the display size on Flickr which remained unless I altered it again. Does any one know how to do this on Firefox 4

Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Permanent Private Browsing mode"
You can use one of these extensions to adjust the default font size and page zoom on web pages:
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592

How can I control the size of a cell in the GridBagLayout?

Hi,Swing Gurus
I am developing a swing-based program using JBulider5 enterprise.
It seems to me that the GridBagLayout is really a hard nut!
How can I control the size of a cell in the GridBagLayout?
It seems that I cann't control the size of a cell directly.
But how the size of a particular cell is determined when I switch the layout manager from XYLayout to GridBagLayout?
Thx in advance!
Regards,
Justine

hi,i have not done what you are asking but there are fields like
COLUMNWIDTH, MINSIZE, MAXGRIDSIZE, PREFEREDSIZE to which you can set the appropriate values and test for your need.hope this helped.bye martian.

Controlling Display size

Similar Messages

Maybe you are looking for