Controlling external displays

When using a secondary display with my macbook pro is it possible to choose what is viewed on that external display?
say i could be running a presentation on the external display but be looking at another program on the macbook pro without it being seen on the external display?
Thanks very much
Rory

Sure. In System Prefs > Displays > Arrangement tab, uncheck the Mirror Displays checkbox. You can drag whatever windows you want to either display. FYI, Apple's Keynote lets you present on one display and view notes, etc., on the other.
Hope this helps...

Similar Messages

External display's brightness can no longer be controlled with external keyboard in 10.8.2

I can no longer control external display's brightness with external keyboard.
Until now my external keyboard controlled external display's brightness and MBPr's keyboard MBPr's brightness. Now the only way of changing external display's brightness is via Display preferences which is cumbersome
Is there any way of going to pre 10.8.2 settings?

I noticed that the keyboard and tablet were'nt working when plugged into a usb hub or monitor usb port. I had to plug in the keyboard and tablet into a mbp usb port where they worked. For some reason, after plugging them back into the usb hub they worked again. Could just be dumb luck though.

Is Mission Control broken with external display?

With mountain lion on macbook pro and an externel monitor attached to it, (and I close the macbook pro display to use only the external display), when I invoke the mission control, I dont see the preview of all the spaces (at the top) and I dont see the "add desktop" button at the top right corner as well.
Once I open the macbook display (such that I am working with both external and laptop display), I see these (add desktop button as well as preview of spaces), on the macbook display where as the big window at the bottom of the screen which shows each application is in the external monitor.
Because of this, I cant use multiple spaces with external monitor only.
Am I missing something or this is a bug??

Posted on the wrong thread.

How can I disable the internal display on my MacBook Pro with connected external display?

I used this metod with the MagSafe power cable connected (see http://osxdaily.com/2012/06/15/yet-another-way-to-turn-off-internal-lcd-display- of-macbook-pro-with-lid-open/).
Open System Preferences and click “Mission Control”, then click on “Hot Corners”
Select a hot corner and pull down the menu to select “Put Display to Sleep”
Now connect the external display to the Mac and move the cursor to the newly created sleep corner to turn off the internal display
Close the MacBook lid and wait a few seconds before opening the lid again, the internal display should stay off while the external display will be powered on
This worked great under Mac OS X 10.7.4, but after the last update to 10.7.5 it doesn’t work more. The built-in display turns off really, but a few seconds after opening the lid it lights up again. Do you have any suggestions? Dimming the brightness or clamshell mode is not very useful.
MacBook Pro 13-inch,
2,7 GHz Intel Core i7,
Mac OS X Lion 10.7.5 (11G56)
Thanks!

I have the same problem: not able to work with my external display mirroring the internal one - while shutting the internal display off.
I believe there is an issue with Mac OS X Lion 7.5 that Apple needs to solve, since apparently it does not happen with this version of the OS only...
https://discussions.apple.com/thread/4315808?start=45&tstart=0
Or any other way to solve it?
Mac Book Air, 13-inch Mid 2011
Mac OS X Lion 10.7.5 11G63
Thank you!

MacBook Pro cannot connect to external display (projector) under Windows

Our office has got one of those lovely new 13" MacBook Pros and we cannot figure out why it cannot connect to either of our 2 projectors with Windows 7.
We have an older MBP with NVidia graphics that connects just fine under both OS X and Windows. And this machine connects fine under Snow Leopard.
There was a recent Thunderbolt chipset update and we applied that; on the Windows side the Intel driver has been updated but nothing happens. Have also zapped the PRAM to no effect.
To add another wrinkle: I just connected the MBP to my Cinema Display and the external display shows fine in both OS X and Windows--Windows didn't even require me to go to the control panel.
This leads me to two thoughts: either it is something with the Thunderbolt to VGA adaptor (hard to believe, though, since it works for OS X) or it is something to do with the native resolution of the projector (equally hard to believe, as changing through various settings in Windows NOTHING happens on the external projector--it doesn't blink, go back or anything.)
Any ideas?

I wish I could find the discussion, but I cannot.
There was a discussion about the Windows 7 driver for the Thunderbolt port. The conclusion I believe was that it only outputs digital signals, not analog.
The other conclusions were:
A USB-VGA adapter adapter bypasses this limitation because the driver is in the adapter itself and works regardless of the OSX/Windows operating system in charge.
Run Windows under VM, where OSX is in charge and can create analog output through Thunderbolt
If only I could find that thread ...

Satellite L500 - How to show external display after closing lid?

Hi,
i`m using the Satellite L500-120 Notebook, and before installing Windows 7 the laptop had a very comfortable function, when i applied an external display.
When i closed the lid of my notebook, the desktop was shown on my external display (with the native resolution of the external display), so i didn`t have to
switch anything at the Control Panel. In Windows 7, i`m missing this function. I already tried to use the Control Panel, but there are no settings, which fits
with the earlier ones. I can duplicate the display, in order to see my desktop screen at my external display, but with the notebook resolution of 1366 x 768.
If i extend the displays, then there is only the background image at the external display, but this time with the native resolution.
So my question is, how to conifgure Windows to recognize that i closed the lid, and that the desktop screen has to be shown on my external display?
Or do i have to install one of the Toshiba applications, which i had before, that realized this function?
Thanks for any help!

Hi
Im not a Windows 7 user because I will wait until it will be released offical but I hope I can help you a little bit:
First of all in Power Management you can choose the action what happens if you close the Lid (e. g. sleep, turn off, etc.). This action should be disabled because otherwise the notebook will shut down or something else.
Then I think you have to install the display driver for your notebook. You can try the Vista driver because the most of them are work on Windows 7.
Then you should be able to set the correct screen resolution for external monitor.
A working display driver is important for clone or extends monitors so check this!!

External display won't work on Window

Hi can anyone please help me in this? when I using window XP, my external display won't display out but when I'm using MAC OS X it work well, why? please help... Thanks

I can only help if you are using an NVidia graphics card, as with that you can use the NVidia Control Panel to setup the external display.
Connect the display
Start NVidia Control panel
Select the Display icon
Then select Change Display Configuration
There you can set the resolution, extend the screen or create a copy et.c.
Hope that helps...

Keep external display full screen on macbook pro

Anyone know how to get an external display to go full screen and not exit full screen when using the internal display? When you click away from the full screen window or switch applications full screen automatically exits.
Is there a way to write a script to tell the full screen only to exit when told to, or does anyone know of a third party program that can do this? I got the freeware cinch to help control full screen on externals but there's no use for it if it will just exit.
 MacBook Pro A1226 2.2GHz Intel

Welcome to the Apple Support Communities
To open Safari always in full-screen mode, open System Preferences > General, and untick "Close windows when quitting an application". Then, close Safari always in full-screen mode, so Safari will always start in full-screen

Win 8.1, Retina MBP, external display, stupid scaling

I've got a Retina MacBook Pro (Late 2013) with a 2880x1800 display, also connected to an external 1920x1080 display, dual-booted into Windows 8.1 with the latest Boot Camp drivers and the most recent nVidia drivers.
In Windows, when I go into the Display control panel and make "Change the size of all items" a little larger, then things look fine on the external display - but the laptop's display shows a teensy tiny taskbar and teensy tiny icons on the desktop.
If I check "Let me choose one scaling level for all my displays", then things look fine on the laptop's display - but the external display's windows and icons are HUGE.
And either way, if I'm not running the laptop's display at Retina resolution - even if I'm running at exactly half resolution, 1440x900 - then the laptop's display is terribly blurry. Makes me want to go back to a pre-Retina laptop.
What are the best Windows settings to have reasonably-sized windows and icons on the Retina display as well as the external display under Windows 8.1?
(Yes, this is just another reminder that I shouldn't bother trying to run Windows on a Mac ... but I thought that handling multiple displays with different pixel densities was supposed to be Windows 8.1's strong suit?)

Good point, but then it's a shame that not only can I not take advantage of the Retina resolution, but then the lower resolution setting makes the Retina display look terribly fuzzy. Even set to exactly half the resolution (2880x1800 -> 1440x900), it looks like WIndows is trying to fuzz everything instead of simply pixel-doubling it.
I understand that's a shortcoming of the nVidia driver. I'll go find the nVidia board to complain...
(I'm extending the desktop, btw, not mirroring.)

Two BenQ external displays not working with new 27" iMac

I have a 27" iMac (newest model) and have been using it with a BenQ BL2710 monitor. It's connected with a mini display port to display port cable. It's been working great; I found that I had to uncheck the 'Displays have separate spaces' box in Mission Control, so I have the menu bar on the iMac'd display only.
Now, I have a 2nd BenQ BL2710 that I'm trying to hook up the same way, using the iMac's 2nd thunderbolt port. The display powers up and all 3 screens look perfect. The problem is getting the arrangement correct. I have the dock on one display, the menu bar on another, and the mouse will only work on one or two of the displays, depending on how I change the arrangement.
I want the dock and the menu bar to be on the iMac's display ply, which is in the center. Is there a trick to getting this done, or do I need a third party dock or other piece of hardware to get it to work?

I just answered my own question; apparently with two external displays connected, the dock has to be positioned on the bottom. I had it on the right of the main iMac display. Moving it to the bottom, and rearranging the position of the monitors in display preferences did the trick.
If anyone knows of a way to accomplish this without moving the dock to the bottom of the screen, I'd be interested. I'd prefer it on the right side, if possible.

External Display Flickers (Intel on board)

Hi,
I have recently made a fresh installation of Arch Linux and trying to setup it for my work environment. I made a basic installation of xfce4 with slim login manager. I wanted to hook my laptop with an external display. I used xrandr to extend my laptop display with the external display. Everything worked fine but my external display flickers insanely bad. I cannot stare at it for > 30s. I dual boot on windows, so I tested the same setup with windows and it worked just fine, out of the box. I even used one of my friend's laptop who's running ubuntu and has the same h/w. It worked out of the box. I have spent more than 8 hours trying to find out where the issue would be and miserably failed. Below are certain logs and output that might help traingulate my issue.
Its a Dell Inspiron N4030, with Intel onboard graphics. I have the xf86-video-intel driver installed and the display works perfectly fine with laptops default display.
Output of xrandr -q
[joker@lucifer ~]$ xrandr -q
Screen 0: minimum 320 x 200, current 2732 x 768, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 309mm x 173mm
1366x768 60.0*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 connected 1366x768+1366+0 (normal left inverted right x axis y axis) 344mm x 194mm
1366x768 60.0*+
1024x768 75.1 72.0 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
/var/log/Xorg.0.log
[ 42.854]
X.Org X Server 1.11.2
Release Date: 2011-11-04
[ 42.854] X Protocol Version 11, Revision 0
[ 42.854] Build Operating System: Linux 3.1.0-3-ARCH x86_64
[ 42.854] Current Operating System: Linux lucifer 3.1.0-4-ARCH #1 SMP PREEMPT Mon Nov 7 22:47:18 CET 2011 x86_64
[ 42.854] Kernel command line: root=/dev/sda5 ro
[ 42.854] Build Date: 07 November 2011 07:53:00AM
[ 42.854]
[ 42.854] Current version of pixman: 0.24.0
[ 42.854] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 42.854] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 42.855] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 10 17:07:34 2011
[ 42.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 42.927] (==) ServerLayout "DualSreen"
[ 42.927] (**) |-->Screen "Screen0" (0)
[ 42.927] (**) | |-->Monitor "Monitor0"
[ 42.945] (**) | |-->Device "Device0"
[ 42.945] (**) |-->Screen "Screen1" (1)
[ 42.945] (**) | |-->Monitor "Monitor1"
[ 42.945] (**) | |-->Device "Device1"
[ 42.945] (**) Option "Xinerama" "1"
[ 42.945] (==) Automatically adding devices
[ 42.945] (==) Automatically enabling devices
[ 42.945] (**) Xinerama: enabled
[ 43.004] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 43.004] Entry deleted from font path.
[ 43.004] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 43.004] Entry deleted from font path.
[ 43.005] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 43.005] Entry deleted from font path.
[ 43.005] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 43.005] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 43.005] Entry deleted from font path.
[ 43.005] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 43.005] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 43.005] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 43.005] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 43.005] (II) Loader magic: 0x7ccae0
[ 43.005] (II) Module ABI versions:
[ 43.005] X.Org ANSI C Emulation: 0.4
[ 43.005] X.Org Video Driver: 11.0
[ 43.005] X.Org XInput driver : 13.0
[ 43.005] X.Org Server Extension : 6.0
[ 43.006] (--) PCI:*(0:0:2:0) 8086:0046:1028:0466 rev 2, Mem @ 0xfac00000/4194304, 0xc0000000/268435456, I/O @ 0x0000f080/8
[ 43.006] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 43.006] (II) LoadModule: "extmod"
[ 43.027] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 43.043] (II) Module extmod: vendor="X.Org Foundation"
[ 43.043] compiled for 1.11.2, module version = 1.0.0
[ 43.043] Module class: X.Org Server Extension
[ 43.043] ABI class: X.Org Server Extension, version 6.0
[ 43.043] (II) Loading extension MIT-SCREEN-SAVER
[ 43.043] (II) Loading extension XFree86-VidModeExtension
[ 43.043] (II) Loading extension XFree86-DGA
[ 43.043] (II) Loading extension DPMS
[ 43.043] (II) Loading extension XVideo
[ 43.043] (II) Loading extension XVideo-MotionCompensation
[ 43.043] (II) Loading extension X-Resource
[ 43.044] (II) LoadModule: "dbe"
[ 43.044] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 43.045] (II) Module dbe: vendor="X.Org Foundation"
[ 43.045] compiled for 1.11.2, module version = 1.0.0
[ 43.045] Module class: X.Org Server Extension
[ 43.045] ABI class: X.Org Server Extension, version 6.0
[ 43.045] (II) Loading extension DOUBLE-BUFFER
[ 43.045] (II) LoadModule: "glx"
[ 43.045] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 43.060] (II) Module glx: vendor="X.Org Foundation"
[ 43.060] compiled for 1.11.2, module version = 1.0.0
[ 43.060] ABI class: X.Org Server Extension, version 6.0
[ 43.060] (==) AIGLX enabled
[ 43.060] (II) Loading extension GLX
[ 43.060] (II) LoadModule: "record"
[ 43.060] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 43.061] (II) Module record: vendor="X.Org Foundation"
[ 43.061] compiled for 1.11.2, module version = 1.13.0
[ 43.061] Module class: X.Org Server Extension
[ 43.061] ABI class: X.Org Server Extension, version 6.0
[ 43.061] (II) Loading extension RECORD
[ 43.061] (II) LoadModule: "dri"
[ 43.061] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 43.063] (II) Module dri: vendor="X.Org Foundation"
[ 43.063] compiled for 1.11.2, module version = 1.0.0
[ 43.063] ABI class: X.Org Server Extension, version 6.0
[ 43.063] (II) Loading extension XFree86-DRI
[ 43.063] (II) LoadModule: "dri2"
[ 43.063] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 43.064] (II) Module dri2: vendor="X.Org Foundation"
[ 43.064] compiled for 1.11.2, module version = 1.2.0
[ 43.064] ABI class: X.Org Server Extension, version 6.0
[ 43.064] (II) Loading extension DRI2
[ 43.064] (II) LoadModule: "intel"
[ 43.091] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 43.114] (II) Module intel: vendor="X.Org Foundation"
[ 43.114] compiled for 1.10.99.902, module version = 2.16.0
[ 43.114] Module class: X.Org Video Driver
[ 43.114] ABI class: X.Org Video Driver, version 11.0
[ 43.114] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 43.114] (++) using VT number 7
[ 43.134] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 43.135] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 43.135] Requested Entity already in use!
[ 43.135] (EE) Screen 1 deleted because of no matching config section.
[ 43.135] (II) UnloadModule: "intel"
[ 43.136] (II) Unloading intel
[ 43.136] drmOpenDevice: node name is /dev/dri/card0
[ 43.136] drmOpenDevice: open result is 8, (OK)
[ 43.136] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 43.136] drmOpenDevice: node name is /dev/dri/card0
[ 43.136] drmOpenDevice: open result is 8, (OK)
[ 43.136] drmOpenByBusid: drmOpenMinor returns 8
[ 43.136] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 43.136] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 43.136] (==) intel(0): RGB weight 888
[ 43.136] (==) intel(0): Default visual is TrueColor
[ 43.136] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 43.136] (--) intel(0): Chipset: "Arrandale"
[ 43.136] (**) intel(0): Relaxed fencing enabled
[ 43.136] (**) intel(0): Wait on SwapBuffers? enabled
[ 43.136] (**) intel(0): Triple buffering? enabled
[ 43.136] (**) intel(0): Framebuffer tiled
[ 43.136] (**) intel(0): Pixmaps tiled
[ 43.136] (**) intel(0): 3D buffers tiled
[ 43.136] (**) intel(0): SwapBuffers wait enabled
[ 43.136] (==) intel(0): video overlay key set to 0x101fe
[ 43.136] (II) intel(0): Output LVDS1 using monitor section Monitor0
[ 43.136] (**) intel(0): Option "Enable" "true"
[ 43.136] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 43.196] (II) intel(0): Output VGA1 has no monitor section
[ 43.196] (II) intel(0): EDID for output LVDS1
[ 43.196] (II) intel(0): Manufacturer: BOE Model: 58e Serial#: 0
[ 43.196] (II) intel(0): Year: 2010 Week: 1
[ 43.196] (II) intel(0): EDID Version: 1.4
[ 43.196] (II) intel(0): Digital Display Input
[ 43.196] (II) intel(0): Undefined color depth
[ 43.196] (II) intel(0): Digital interface is undefined
[ 43.196] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 43.196] (II) intel(0): Gamma: 2.20
[ 43.196] (II) intel(0): No DPMS capabilities specified
[ 43.196] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 43.196] (II) intel(0): First detailed timing is preferred mode
[ 43.196] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 43.196] (II) intel(0): redX: 0.574 redY: 0.335 greenX: 0.335 greenY: 0.585
[ 43.196] (II) intel(0): blueX: 0.154 blueY: 0.119 whiteX: 0.312 whiteY: 0.328
[ 43.196] (II) intel(0): Manufacturer's mask: 0
[ 43.196] (II) intel(0): Supported detailed timing:
[ 43.196] (II) intel(0): clock: 72.3 MHz Image Size: 309 x 173 mm
[ 43.196] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 43.196] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
[ 43.196] (II) intel(0): Supported detailed timing:
[ 43.196] (II) intel(0): clock: 72.3 MHz Image Size: 309 x 173 mm
[ 43.196] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 43.196] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
[ 43.196] (II) intel(0): KFDV9HT14101
[ 43.196] (II) intel(0): Unknown vendor-specific block 0
[ 43.196] (II) intel(0): EDID (in hex):
[ 43.196] (II) intel(0): 00ffffffffffff0009e58e0500000000
[ 43.196] (II) intel(0): 01140104801f11780a3fa09355559527
[ 43.196] (II) intel(0): 1e505400000001010101010101010101
[ 43.196] (II) intel(0): 010101010101411c56a0500016303020
[ 43.196] (II) intel(0): 360035ad1000001a411c56a050001630
[ 43.196] (II) intel(0): 3020360035ad1000001a000000fe004b
[ 43.196] (II) intel(0): 46445639814854313431303100000000
[ 43.196] (II) intel(0): 00004101940100000001010a20200000
[ 43.196] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 43.196] (II) intel(0): Printing DDC gathered Modelines:
[ 43.196] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 43.196] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 43.196] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 43.196] (II) intel(0): Printing probed modes for output LVDS1
[ 43.196] (II) intel(0): Modeline "1366x768"x60.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 43.196] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 43.196] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 43.196] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 43.196] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 43.255] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 43.255] (II) intel(0): EDID for output VGA1
[ 43.255] (II) intel(0): Manufacturer: PHL Model: c02d Serial#: 9740
[ 43.255] (II) intel(0): Year: 2009 Week: 35
[ 43.255] (II) intel(0): EDID Version: 1.3
[ 43.255] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 43.255] (II) intel(0): Sync: Separate
[ 43.255] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 43.255] (II) intel(0): Gamma: 2.20
[ 43.255] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 43.255] (II) intel(0): First detailed timing is preferred mode
[ 43.255] (II) intel(0): redX: 0.635 redY: 0.335 greenX: 0.281 greenY: 0.597
[ 43.255] (II) intel(0): blueX: 0.153 blueY: 0.085 whiteX: 0.312 whiteY: 0.328
[ 43.255] (II) intel(0): Supported established timings:
[ 43.255] (II) intel(0): 720x400@70Hz
[ 43.255] (II) intel(0): 640x480@60Hz
[ 43.255] (II) intel(0): 640x480@67Hz
[ 43.255] (II) intel(0): 640x480@72Hz
[ 43.255] (II) intel(0): 640x480@75Hz
[ 43.255] (II) intel(0): 800x600@56Hz
[ 43.255] (II) intel(0): 800x600@60Hz
[ 43.255] (II) intel(0): 800x600@72Hz
[ 43.255] (II) intel(0): 800x600@75Hz
[ 43.255] (II) intel(0): 832x624@75Hz
[ 43.255] (II) intel(0): 1024x768@60Hz
[ 43.255] (II) intel(0): 1024x768@70Hz
[ 43.255] (II) intel(0): 1024x768@75Hz
[ 43.255] (II) intel(0): Manufacturer's mask: 0
[ 43.255] (II) intel(0): Supported standard timings:
[ 43.255] (II) intel(0): #0: hsize: 640 vsize 400 refresh: 70 vid: 2609
[ 43.255] (II) intel(0): #1: hsize: 1024 vsize 768 refresh: 72 vid: 19553
[ 43.255] (II) intel(0): Supported detailed timing:
[ 43.255] (II) intel(0): clock: 85.8 MHz Image Size: 344 x 194 mm
[ 43.255] (II) intel(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0
[ 43.255] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0
[ 43.255] (II) intel(0): Serial No: AU50935009740
[ 43.255] (II) intel(0): Monitor name: Philips 160E
[ 43.255] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 60 kHz, PixClock max 86 MHz
[ 43.255] (II) intel(0): EDID (in hex):
[ 43.255] (II) intel(0): 00ffffffffffff00410c2dc00c260000
[ 43.255] (II) intel(0): 23130103682213782ab370a255489827
[ 43.255] (II) intel(0): 155054bfee00310a614c010101010101
[ 43.255] (II) intel(0): 0101010101017f2156aa51001e30468f
[ 43.255] (II) intel(0): 330058c21000001e000000ff00415535
[ 43.255] (II) intel(0): 30393335303039373430000000fc0050
[ 43.255] (II) intel(0): 68696c69707320313630450a000000fd
[ 43.255] (II) intel(0): 00384c1e3c08000a20202020202000c0
[ 43.255] (II) intel(0): Printing probed modes for output VGA1
[ 43.255] (II) intel(0): Modeline "1366x768"x60.0 85.75 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.9 kHz)
[ 43.255] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 43.255] (II) intel(0): Modeline "1024x768"x72.0 78.44 1024 1080 1192 1360 768 769 772 801 -hsync +vsync (57.7 kHz)
[ 43.255] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 43.255] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 43.255] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 43.255] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 43.255] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 43.255] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 43.255] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 43.255] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 43.255] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 43.255] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 43.255] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 43.255] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 43.255] (II) intel(0): Output LVDS1 enabled by config file
[ 43.255] (II) intel(0): Output VGA1 connected
[ 43.255] (II) intel(0): Using exact sizes for initial modes
[ 43.255] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 43.255] (II) intel(0): Output VGA1 using initial mode 1366x768
[ 43.255] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 43.255] (II) intel(0): Kernel page flipping support detected, enabling
[ 43.255] (**) intel(0): Display dimensions: (310, 170) mm
[ 43.255] (**) intel(0): DPI set to (111, 114)
[ 43.255] (II) Loading sub module "fb"
[ 43.255] (II) LoadModule: "fb"
[ 43.255] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 43.277] (II) Module fb: vendor="X.Org Foundation"
[ 43.277] compiled for 1.11.2, module version = 1.0.0
[ 43.277] ABI class: X.Org ANSI C Emulation, version 0.4
[ 43.277] (II) Loading sub module "dri2"
[ 43.277] (II) LoadModule: "dri2"
[ 43.277] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 43.277] (II) Module dri2: vendor="X.Org Foundation"
[ 43.277] compiled for 1.11.2, module version = 1.2.0
[ 43.277] ABI class: X.Org Server Extension, version 6.0
[ 43.277] (==) Depth 24 pixmap format is 32 bpp
[ 43.277] (II) intel(0): [DRI2] Setup complete
[ 43.277] (II) intel(0): [DRI2] DRI driver: i965
[ 43.277] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 43.339] (II) UXA(0): Driver registered support for the following operations:
[ 43.339] (II) solid
[ 43.339] (II) copy
[ 43.339] (II) composite (RENDER acceleration)
[ 43.339] (II) put_image
[ 43.339] (II) get_image
[ 43.339] (==) intel(0): Backing store disabled
[ 43.339] (==) intel(0): Silken mouse enabled
[ 43.339] (II) intel(0): Initializing HW Cursor
[ 43.456] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 43.466] (==) intel(0): DPMS enabled
[ 43.466] (==) intel(0): Intel XvMC decoder enabled
[ 43.466] (II) intel(0): Set up textured video
[ 43.466] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 43.466] (II) intel(0): direct rendering: DRI2 Enabled
[ 43.466] (WW) intel(0): Option "Enable" is not used
[ 43.466] (WW) intel(0): Option "TwinView" is not used
[ 43.466] (==) intel(0): hotplug detection: "enabled"
[ 43.466] (--) RandR disabled
[ 43.466] (II) Initializing built-in extension Generic Event Extension
[ 43.466] (II) Initializing built-in extension SHAPE
[ 43.466] (II) Initializing built-in extension MIT-SHM
[ 43.466] (II) Initializing built-in extension XInputExtension
[ 43.466] (II) Initializing built-in extension XTEST
[ 43.466] (II) Initializing built-in extension BIG-REQUESTS
[ 43.466] (II) Initializing built-in extension SYNC
[ 43.466] (II) Initializing built-in extension XKEYBOARD
[ 43.466] (II) Initializing built-in extension XC-MISC
[ 43.466] (II) Initializing built-in extension SECURITY
[ 43.466] (II) Initializing built-in extension XINERAMA
[ 43.466] (II) Initializing built-in extension XFIXES
[ 43.466] (II) Initializing built-in extension RENDER
[ 43.466] (II) Initializing built-in extension RANDR
[ 43.466] (II) Initializing built-in extension COMPOSITE
[ 43.466] (II) Initializing built-in extension DAMAGE
[ 43.605] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 43.605] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 43.605] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 43.605] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 43.605] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 43.605] (II) AIGLX: Loaded and initialized i965
[ 43.605] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 43.605] (II) intel(0): Setting screen physical size to 361 x 203
[ 43.909] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 43.910] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 43.910] (II) LoadModule: "evdev"
[ 43.910] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.910] (II) Module evdev: vendor="X.Org Foundation"
[ 43.910] compiled for 1.10.99.902, module version = 2.6.0
[ 43.910] Module class: X.Org XInput Driver
[ 43.910] ABI class: X.Org XInput driver, version 13.0
[ 43.910] (II) Using input driver 'evdev' for 'Power Button'
[ 43.910] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.911] (**) Power Button: always reports core events
[ 43.911] (**) Power Button: Device: "/dev/input/event7"
[ 43.911] (--) Power Button: Found keys
[ 43.911] (II) Power Button: Configuring as keyboard
[ 43.911] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event7"
[ 43.911] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 43.911] (**) Option "xkb_rules" "evdev"
[ 43.911] (**) Option "xkb_model" "evdev"
[ 43.911] (**) Option "xkb_layout" "us"
[ 43.931] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 43.931] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 43.931] (II) Using input driver 'evdev' for 'Video Bus'
[ 43.931] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.931] (**) Video Bus: always reports core events
[ 43.931] (**) Video Bus: Device: "/dev/input/event15"
[ 43.931] (--) Video Bus: Found keys
[ 43.931] (II) Video Bus: Configuring as keyboard
[ 43.931] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input15/event15"
[ 43.931] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 43.931] (**) Option "xkb_rules" "evdev"
[ 43.931] (**) Option "xkb_model" "evdev"
[ 43.931] (**) Option "xkb_layout" "us"
[ 43.932] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 43.932] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 43.932] (II) Using input driver 'evdev' for 'Power Button'
[ 43.932] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.932] (**) Power Button: always reports core events
[ 43.932] (**) Power Button: Device: "/dev/input/event4"
[ 43.932] (--) Power Button: Found keys
[ 43.932] (II) Power Button: Configuring as keyboard
[ 43.932] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 43.932] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 43.932] (**) Option "xkb_rules" "evdev"
[ 43.932] (**) Option "xkb_model" "evdev"
[ 43.932] (**) Option "xkb_layout" "us"
[ 43.932] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[ 43.932] (II) No input driver/identifier specified (ignoring)
[ 43.932] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
[ 43.932] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 43.932] (II) Using input driver 'evdev' for 'Sleep Button'
[ 43.932] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.932] (**) Sleep Button: always reports core events
[ 43.932] (**) Sleep Button: Device: "/dev/input/event6"
[ 43.932] (--) Sleep Button: Found keys
[ 43.932] (II) Sleep Button: Configuring as keyboard
[ 43.932] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event6"
[ 43.932] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 43.933] (**) Option "xkb_rules" "evdev"
[ 43.933] (**) Option "xkb_model" "evdev"
[ 43.933] (**) Option "xkb_layout" "us"
[ 43.933] (II) config/udev: Adding input device HID 413c:8161 (/dev/input/event2)
[ 43.933] (**) HID 413c:8161: Applying InputClass "evdev keyboard catchall"
[ 43.933] (II) Using input driver 'evdev' for 'HID 413c:8161'
[ 43.933] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.933] (**) HID 413c:8161: always reports core events
[ 43.933] (**) HID 413c:8161: Device: "/dev/input/event2"
[ 43.933] (--) HID 413c:8161: Found keys
[ 43.933] (II) HID 413c:8161: Configuring as keyboard
[ 43.933] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input2/event2"
[ 43.933] (II) XINPUT: Adding extended input device "HID 413c:8161" (type: KEYBOARD, id 10)
[ 43.933] (**) Option "xkb_rules" "evdev"
[ 43.933] (**) Option "xkb_model" "evdev"
[ 43.933] (**) Option "xkb_layout" "us"
[ 43.934] (II) config/udev: Adding input device HID 413c:8162 (/dev/input/event3)
[ 43.934] (**) HID 413c:8162: Applying InputClass "evdev pointer catchall"
[ 43.934] (II) Using input driver 'evdev' for 'HID 413c:8162'
[ 43.934] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.934] (**) HID 413c:8162: always reports core events
[ 43.934] (**) HID 413c:8162: Device: "/dev/input/event3"
[ 43.934] (--) HID 413c:8162: Found 3 mouse buttons
[ 43.934] (--) HID 413c:8162: Found relative axes
[ 43.934] (--) HID 413c:8162: Found x and y relative axes
[ 43.934] (II) HID 413c:8162: Configuring as mouse
[ 43.934] (**) HID 413c:8162: YAxisMapping: buttons 4 and 5
[ 43.934] (**) HID 413c:8162: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 43.934] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/input/input3/event3"
[ 43.934] (II) XINPUT: Adding extended input device "HID 413c:8162" (type: MOUSE, id 11)
[ 43.934] (II) HID 413c:8162: initialized for relative axes.
[ 43.934] (**) HID 413c:8162: (accel) keeping acceleration scheme 1
[ 43.934] (**) HID 413c:8162: (accel) acceleration profile 0
[ 43.934] (**) HID 413c:8162: (accel) acceleration factor: 2.000
[ 43.934] (**) HID 413c:8162: (accel) acceleration threshold: 4
[ 43.934] (II) config/udev: Adding input device HID 413c:8162 (/dev/input/mouse1)
[ 43.934] (II) No input driver/identifier specified (ignoring)
[ 43.934] (II) config/udev: Adding input device Laptop_Integrated_Webcam_0.3M (/dev/input/event10)
[ 43.934] (**) Laptop_Integrated_Webcam_0.3M: Applying InputClass "evdev keyboard catchall"
[ 43.934] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_0.3M'
[ 43.934] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.934] (**) Laptop_Integrated_Webcam_0.3M: always reports core events
[ 43.934] (**) Laptop_Integrated_Webcam_0.3M: Device: "/dev/input/event10"
[ 43.934] (--) Laptop_Integrated_Webcam_0.3M: Found keys
[ 43.934] (II) Laptop_Integrated_Webcam_0.3M: Configuring as keyboard
[ 43.934] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
[ 43.934] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_0.3M" (type: KEYBOARD, id 12)
[ 43.934] (**) Option "xkb_rules" "evdev"
[ 43.934] (**) Option "xkb_model" "evdev"
[ 43.934] (**) Option "xkb_layout" "us"
[ 43.935] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 43.935] (II) No input driver/identifier specified (ignoring)
[ 43.935] (II) config/udev: Adding input device HDA Intel Mic at Ext Right Jack (/dev/input/event12)
[ 43.935] (II) No input driver/identifier specified (ignoring)
[ 43.935] (II) config/udev: Adding input device HDA Intel HP Out at Ext Right Jack (/dev/input/event13)
[ 43.935] (II) No input driver/identifier specified (ignoring)
[ 43.935] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 43.935] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 43.935] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 43.935] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.936] (**) USB OPTICAL MOUSE: always reports core events
[ 43.936] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 43.936] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
[ 43.936] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
[ 43.936] (--) USB OPTICAL MOUSE: Found relative axes
[ 43.936] (--) USB OPTICAL MOUSE: Found x and y relative axes
[ 43.936] (II) USB OPTICAL MOUSE: Configuring as mouse
[ 43.936] (II) USB OPTICAL MOUSE: Adding scrollwheel support
[ 43.936] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 43.936] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 43.936] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1/event1"
[ 43.936] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 13)
[ 43.936] (II) USB OPTICAL MOUSE: initialized for relative axes.
[ 43.936] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 43.936] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 43.936] (II) No input driver/identifier specified (ignoring)
[ 43.936] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 43.936] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 43.936] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 43.936] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.936] (**) AT Translated Set 2 keyboard: always reports core events
[ 43.936] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 43.936] (--) AT Translated Set 2 keyboard: Found keys
[ 43.936] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 43.936] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 43.936] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 43.936] (**) Option "xkb_rules" "evdev"
[ 43.936] (**) Option "xkb_model" "evdev"
[ 43.936] (**) Option "xkb_layout" "us"
[ 43.937] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event14)
[ 43.937] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 43.937] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 43.937] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.937] (**) PS/2 Generic Mouse: always reports core events
[ 43.937] (**) PS/2 Generic Mouse: Device: "/dev/input/event14"
[ 43.937] (--) PS/2 Generic Mouse: Found 3 mouse buttons
[ 43.937] (--) PS/2 Generic Mouse: Found relative axes
[ 43.937] (--) PS/2 Generic Mouse: Found x and y relative axes
[ 43.937] (II) PS/2 Generic Mouse: Configuring as mouse
[ 43.937] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 43.937] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 43.937] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event14"
[ 43.937] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 15)
[ 43.937] (II) PS/2 Generic Mouse: initialized for relative axes.
[ 43.937] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 43.937] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse2)
[ 43.937] (II) No input driver/identifier specified (ignoring)
[ 43.937] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 43.937] (II) No input driver/identifier specified (ignoring)
[ 43.938] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event9)
[ 43.938] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 43.938] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 43.938] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 43.938] (**) Dell WMI hotkeys: always reports core events
[ 43.938] (**) Dell WMI hotkeys: Device: "/dev/input/event9"
[ 43.938] (--) Dell WMI hotkeys: Found keys
[ 43.938] (II) Dell WMI hotkeys: Configuring as keyboard
[ 43.938] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[ 43.938] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
[ 43.938] (**) Option "xkb_rules" "evdev"
[ 43.938] (**) Option "xkb_model" "evdev"
[ 43.938] (**) Option "xkb_layout" "us"
[ 48.392] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 48.392] (II) intel(0): Printing DDC gathered Modelines:
[ 48.392] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 48.456] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 48.457] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 48.457] (II) intel(0): Printing DDC gathered Modelines:
[ 48.457] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 48.517] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 49.976] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 49.976] (II) intel(0): Printing DDC gathered Modelines:
[ 49.976] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 50.035] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 213.440] (II) config/udev: removing device USB OPTICAL MOUSE
[ 213.440] (II) USB OPTICAL MOUSE: Close
[ 213.440] (II) UnloadModule: "evdev"
[ 213.440] (II) Unloading evdev
[ 213.728] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 213.728] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 213.728] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 213.728] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 213.728] (**) USB OPTICAL MOUSE: always reports core events
[ 213.728] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 213.728] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
[ 213.728] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
[ 213.728] (--) USB OPTICAL MOUSE: Found relative axes
[ 213.728] (--) USB OPTICAL MOUSE: Found x and y relative axes
[ 213.728] (II) USB OPTICAL MOUSE: Configuring as mouse
[ 213.728] (II) USB OPTICAL MOUSE: Adding scrollwheel support
[ 213.728] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 213.728] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 213.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input16/event1"
[ 213.728] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 13)
[ 213.728] (II) USB OPTICAL MOUSE: initialized for relative axes.
[ 213.728] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 213.730] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 213.730] (II) No input driver/identifier specified (ignoring)
[ 1627.253] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1627.253] (II) intel(0): Printing DDC gathered Modelines:
[ 1627.253] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1627.311] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1644.964] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1644.964] (II) intel(0): Printing DDC gathered Modelines:
[ 1644.964] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.027] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1645.042] (II) intel(0): Allocated new frame buffer 2752x768 stride 11264, tiled
[ 1645.230] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1645.230] (II) intel(0): Printing DDC gathered Modelines:
[ 1645.230] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.289] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1645.307] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1645.307] (II) intel(0): Printing DDC gathered Modelines:
[ 1645.307] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.365] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1645.387] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1645.387] (II) intel(0): Printing DDC gathered Modelines:
[ 1645.387] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.446] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 1645.447] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 1645.447] (II) intel(0): Printing DDC gathered Modelines:
[ 1645.447] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 1645.505] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
[ 2335.972] (II) intel(0): EDID vendor "BOE", prod id 1422
[ 2335.972] (II) intel(0): Printing DDC gathered Modelines:
[ 2335.972] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
[ 2336.030] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
lspci output
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
12:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
13:00.0 Ethernet controller: Atheros Communications AR8152 v2.0 Fast Ethernet (rev c1)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

No one? I have the exact same problem. MSI x360 laptop, intel onboard graphics. I too use xrandr. I've seen elsewhere that windows users have solved this by turning off GPU overclocking. Maybe this can point us in the right direction?

T60 2007-FUG ATI X1400 Windows 7 64-bit projector and external display problem

I have Windows 7 64-bit Enterprise on my T60. I have tried to install many different ati drivers, but nothing seems to work. I cant use a projector or external display via VGA port. I heard that if I boot with a projector then it works ok.
I have installed Ati Install Manager and so on. I have uninstalled drivers etc. I have search forums. I installed all updates from Lenovo site. BIOS is up to date. I installed X1400 driver from Windows update site. Driver date is 1.12.2008. I cant update it. Everything else works super.
What to do?

Looking at the ATI drivers on the T60 support site, I do not see one that supports Win7....don't know if there is a plan to.
You probably have basic functionality with the Vista driver, but I would not imagine that all options will be available.
If you cannot get the external VGA port to work through the Catalyst Control Center, then I would would chalk it up to a lack of Win7 support.
Regards

External Display Flickering/Blanking out on Windows 8.1 Boot Camp

OK, so I have a MBP 15" Mid-2012 model running the latest versions of Mavericks and all software and drivers on Windows are up-to-date. I am using my external display through an Active HDMI adapter for Mini DisplayPort/Thunderbolt (one that broadcasts audio as well as video).
So, this adapter and image seems to work perfectly fine on the Mac side, however, when I flip the switch to Windows 8.1, the external display goes haywire and goes blank and flickers with occasional lines and static across the screen. Image comes back every few seconds and then will suddenly lose signal.
I've been reading around the internet and I've seen that this could be a hardware issue in that Intel never put support for Thunderbolt/Mini DisplayPort on their chipsets for Windows, not a driver issue.
How screwed am I? If not so screwed, what steps do I need to take to attain functionality of the external display while running Windows 8.1 through Boot Camp?
Note: my Mac does not come with an HDMI port already installed like current Macs. This was the last high-end Macbook Pro to have an optical drive installed on it.

From Tech specs for your machine MacBook Pro (15-inch, Mid 2012) - Technical Specifications
Intel HD Graphics 4000
NVIDIA GeForce GT 650M with 512MB of GDDR5 memory (15-inch 2.3GHz configuration) or NVIDIA GeForce GT 650M with 1GB of GDDR5 memory (15-inch 2.6GHz configuration) and automatic graphics switching
Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on an external display, both at millions of colors
From the Intel downloads, there is a new driver for HD4000...
https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProdId=3712
It may be worth a test.
From Nvidia website...
http://www.nvidia.com/download/driverResults.aspx/77228/en-us
On a later rMBP, I can connect three displays via TB at full resolution.
One suggestion is to try a Display-miniDP cable, instead of a converted HDMI signal, if the monitor will accept a DP connection.
If it works correctly on the Mac side, it would be a driver issue, since the hardware supports it with one OS, but not the other. The effects you describe indicates that some pins on the HDMI are not getting correct signals to maintain image refresh rates or pixel sync. When you use the current connection, does the Control Panel -> Displays detect the model and name correctly? If not, the EDID detection is failing.

Update to 10.6.8 colour problems with external display

I have a mid-2010 13" macbook pro. I use a mini DVI to HDMI adaptor to connect to my Philips LCD TV. It has always worked perfectly including audio. Since update to 10.6.8 (yesterday) there is a colour-cast on the external display that makes it unusable. I have tried a hard reset of the mac with no effect except that the colour cast changed from green to red (strange!).
Anyone had a similar problem or have any ideas how I could solve it? (no time machine so I can't downgrade unfortunately)

Though I am using and iMac 27 and not a macbook, I have the similar issues since the 10.6.8 update.
I too am using the adapter to connect to a Philips 42' LCD.
You can see my post here: (has a pic of what my TV image now looks like since update.)
https://discussions.apple.com/message/15488605#15488605
I ended up going back to 10.6.7, not a fix, but no other alternative..
I used to have this problem a year ago on a PC that happened to have the same ATi Graphics card. I just used the ATI control center and changed a setting to YBR component or something like that in some color settings. But unfortunately we don't have the ATI control panel for mac, least I don't think we have any kind of alternative, but would prolly fix it..

MBP Retina shows wrong resolution on external display since 10.8.4

I have a MBP retina and I'm using it with an external display, Dell U2711, connected via a Mini-DP to DP cable. It all worked amazingly well until 10.8.4 came out. Now, when I connect the display, it no longer shows the correct 2560 X 1440 resolution, but shows 1080p. The displays preferences pane does not allow going over 1080p. It does recognize the display model, though.
It started with one port. The machine has two TB ports, so one of them worked fine and the other didn't (the one closer to the user was acting up). Then it degraded further to the second port. Now, if I plug and unplug several times and fiddle with the displays control panels, I might just get it right eventually. It takes some time, but eventually the machine gets it right. At least that's what I've been experiencing in the last few days.
I don't think it's a hardware issue. It's possible that my cable is at fault, but I seriously doubt that. I'm wondering if anyone else got the same problem, just checking before I go and splurge on a new cable (these cables are not easy to find).
Thanks,
Z

This worked for me:
Step 1: Delete system windowserver preferences
In the Finder, from the menu bar, select "Go -> Go to Folder..."
Enter: /Library/Preferences/
Delete the file called com.apple.windowserver.plist
Step 2: Delete user windowserver preferences
In the Finder, from the menu bar, select "Go -> Go to Folder..."
Enter: ~/Library/Preferences/ByHost/
Delete all files that start with com.apple.windowserver (On my rMBP, there was one file called com.apple.windowserver.12AFB147-95D6-5C70-8F62-C1E4F2BE81BE)
Step 3: Reset the PRAM (These instructions are fromhttp://support.apple.com/kb/HT1379)
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Controlling external displays

Similar Messages

Maybe you are looking for