Controlling issue

I post one document in f-02 normal posting with ref cost center & Profit center i had give. If i want to check the amount like cost center level amount value is showing & But  profit center level the amount value is not updated can u tell me asap

Hello,
Can you please check:
IMG => Controlling => General Controlling => Organization => Maintain Versions
Select your version and click on
"Settings for Profit Center Accounting"
See whether "Online transfer" has been check for each year.
In 0KE5, check whether year and activity indicator has been ticked.
Also check in GB02 whether document numbers are maintained for local documents.
Regards,
Ravi

Similar Messages

  • 5s Volume control issues

    Anyone having volume control issues?  My wife's 5s (less than a month old) is having issues with the up volume.  If she mutes it using the down volume, it won't go back up.  I can get it to work if I hold the volume a long time and it eventually comes back.  Or last time i had to remove her case, hold the volume and release several times before it finally kicked in.  Any thoughts or ideas?  Thanks.

    Hi,
    Please test in other computer to see if the issue persists, it may be caused by the bad output channel.
    But for better solution, I recommend you go to MSDN forum for further help.
    http://msdn.microsoft.com/en-US/
    Thanks for your understanding!
    Regards,
    Ada Liu
    TechNet Community Support

  • Legal control Issue - License cannot be used

    Hi Team,
    The sales order has Legal Control: Issue Error, due to this we are unable to deliver the goods. the below message found in the Log details:
    Access object: License Master
    Key (license nubmer): xxxxx
    Validity period not long enough
    Requested delivery date for item: 02/20/2012
    End of validity period of license: 1231/2011
    License cannot be used
    we tried to extend the validity of license but it is not allowing. can anyone give some inputs on this error.
    Thanks,
    Rajam

    Its a SAP GTS related error.
    I hope you are aware of the License are created under Legal Control in GTS system.
    If I'm not wrong, we can maintain License (GTS) by using TCode /SAPSLL/LCLIC01 and if the License is in active mode then can be modified by using TCode /SAPSLL/LCD_CHANGE
    If my input didn't assist, then try to post your SAP GTS related query in SCN Forum following, for expertise help on SAP GTS.
    - [Forum on *_SAP Global Trade Service_*|SAP Global Trade Services (GTS);
    Regards
    JP

  • Jabber for Windows 9.2 deskphone control issue

    Hi experts,
    I'm having a problem with the newly installed Jabber for Windows 9.2.0. When I click on the bottom right "control phone" and select my Cisco 7941 it fails. I tried restarting the Cisco CTIManager service with no luck.
    Deployment:
    IM&Presence: cloud (Webex service)
    CUCM version: 8.6(2a)
    LDAP integration: full (with authentication)
    Deskphone control was working prior the upgrade of Jabber for Windows. Everything else remained the same version.
    Using Jabber softphone as a client still works fine.
    CUCM ENd User is correctly configured.
    Wireshark trace of my Jabber for Windows 9.2 client communicating with CUCM when attempting to control my deskphone shows the following:
    Username: filippo.zangheri
    Password: checked three times (it is correct because Jabber softphone works fine).
    Any hint?
    Thanks.
    Filippo

    Davide,
    I know i am kind of late to the party on this one but i have fixed my issue and wanted to give you the information to see if this will work for you. If this is even still an issue?
    I too had the same issue and just like you i confirmed everything was correct however I discovered something when I was looking into my End User profile on the CUCM. I had originally swapped my 7971 phone with a new 8945 phone and I had both phones associated with my line for a while before I removed the old 7971.
    My End User profile still had both phones associated with my number even though the 7971 phone had been removed from my line. This was not allowing the CTI to connect to my 8945 phone or allow my jabber client to "Control Phone" properly because it couldn't figure out which phone to control. I went into the CUCM and physically deleted the 7971 phone from the system which released the associated phone in my End User profile. Once I did that, I "Control Phone" in my Jabber client and voila it worked like a charm!
    To make sure I didn't have any Jabber client issues after doing this i signed out of my Jabber client and deleted the local system profile for the Jabber client and then signed back into Jabber and let it recreate the profile. Once that was done i have not had any issues with my Jabber client controlling my phone and all functions work perfectly.
    Hope this helps...

  • [Solved] Screen brightness control issue

    I just purchased a Lenovo T410s. I have set it up to only use Nvidia and only give visibility to the Nvidia GPU. The problem I have is once X starts I can no longer change the screen brightness with the function keys. I'm using KDE and it registers that I'm trying to change the brightness but the screen never changes. If switch to run level 3 I can use the function keys to change the brightness without an issue. I'm confused at what is causing the issue. I'm not sure what information you need to help me, but I will give you what you need if you tell me.
    EDIT: I discovered on the Nvidia forums that the backlight function was disabled in the drivers for this model. Apparently when in use it causes squealing sounds.
    Last edited by migizi (2010-12-09 13:15:40)

    I did some more testing and here is what I found out. I switched my laptop to use integrated GPU only, so that means Arch sees my GPU as the Intel HD. Now I can boot X and control my brightness with the functions keys. Has anyone else run into the problem with Nvidia drivers and the Quatro NVS 3100m GPU?

  • Table Control Issue

    Hi all,
              I had a issue where in when I display some records in the table control, it is showing the records and the rest of the records are going into grey mode.
    For example, Iam getting 3 records into the table control.  From the fourth line of the table control, it is displaying the grey color.( I mean disable mode).
    I have a requirement where the end user must have the facility to enter the records manually also.    
    So, How to make the grids of the table control in such a way we can enter some data manually along with the imported data.
    Please let me get some ideas.
    thanks and regards
    Murali Krishna Tatoju

    Hi Murali,
    I have the following logic in the PBO and it works fine,
    DATA: tab_fill TYPE i,
            calc_fill TYPE i,
            add_fill type i,
            no_lines_add type i.
      CLEAR: tab_fill, calc_fill, add_fill, no_lines_add.
    *check the current line number and the data filled.
      DESCRIBE TABLE g_tc_rate_card_itab LINES tab_fill.{color:red} "g_tc_rate_card_itab----> internal table{color}
      IF tab_fill GE 7.
        calc_fill = tab_fill MOD 7.   {color:red}" Initial 7 rows are available in the table for input u can change this as per you requirement or the no. of rows initially available in your screen{color}
        IF calc_fill = 0.
         add_fill = tab_fill / 7.
         add_fill = add_fill + 1.
         no_lines_add = 7 * add_fill.
          tc_rate_card-lines  =  no_lines_add.  {color; red}" tc_rate_card ----> Table control name{color}
        ENDIF.
      ENDIF.
    By this way you can get rid of the ADD button since as soon as the 7th row is filled with data it adds up more 7 rows in the table control which are read for input.
    Regards,
    Abhijit G. Borakr

  • PDF interactivity : page control issue (pdf file considered as a form)

    Hello there,
    I've got a slight but quite annoying issue when exporting a PDF from my InDesign CS3 file. Let me explain.
    The file is some sort of glossary with interactive content (such as a table of content, images with over effects and text with tooltips) and two buttons on the master page which allow the user to browse the document forward or backwards (basic next/previous page controls). Those two buttons work as expected, but their presence causes something strange when exporting the document.
    What happens is that the exported PDF document is considered as a form when those buttons are present.
    I'd like to keep those controls, but without having Acrobat Reader reminding me that I'm browsing through a form that I won't be able to save (bla bla bla). Which means that I just would like the file to behave as a standard document instead of a form document.
    If any of you ever experienced that issue, I'd like to know how you solved it.
    Thanks a lot.

    Thanks for the answer, but I found out the cause of the issue.
    What happens is quite weird.
    Using inDesign, once your file exceeds 100 buttons it exports itself as a PDF form instead of a standard PDF document. No straight solution seems to exist, but I found a way to bypass this problem.
    Instead of creating my controls in the master page, I created them (only once) in the first page they appear in. Then, in Acrobat Pro, I just selected them and used the "duplicate" command.
    There are two benefits when using this solution:
    your PDF document won't turn into a form (which can be a real problem if you don't want to confuse the document users)
    your PDF file will be lighter. Indeed, when creating a button in inDesign (even if you create it on the master page) the exported PDF document won't contain X occurences of the same button, but X different buttons (which can incread the size of your document dramaticaly when it reaches a large amount of pages).
    It took me hours to find out a solution to this problem, I hope it will help someone else than me.

  • Adding a custom webpart to webpart page not a safe control issue

    When I am adding a custom web part to web part page I am getting below error as a popup. Plz help if any body resolved the same issue.
    Unable to add selected web part(s). (Web Part Name): A Web Part or Web Form Control on this Page cannot be displayed or imported.
    The type could not be found or it is not registered as safe
    Regards.
    Avinash.
    Avinash

    Hi,
    Here you go. This should help you.
    ow many times have you guys faced an issue like this ?"The type could not be found or it is not registered as safe." .To resolve this, make sure that you add safe controls around your web part assembly in web.config.
    <SafeControls>
    < SafeControl Assembly=”WebPart, Version=1.0.0.0, Culture=neutral, PublicKeyToken=abcdeddf23232″ Namespace=”Mywebpart.WebPart” TypeName=”*” Safe=”True” />
    < /SafeControls>
    The above ensure that your web part code is secured and wont let any anonymous users to access the web part.
    Happy SharePointing ;-)
    http://www.c-sharpcorner.com/Blogs/15024/
    Please remember to click 'Mark as Answer' on the answer if it helps you

  • Cross Company Controlling Issue

    Dear Experts,
    My Client is using two controlling areas.First controlling area have 1 company code assigned on it and another have 10 company codes assigned on it. Now they want to do cross company code controlling between these 11 company codes but as the controlling areas are different then how can we cater this issue?
    Please guide.
    Regards,
    Zain Bashir

    Dear Zain
    Controlling area is just like a box limiting the management to slice and dice the data within the defined boundaries of that box. There is no cross controlling area activities possible.
    REF: http://help.sap.com/erp2005_ehp_06_hana/helpdata/en/35/26b5d3afab52b9e10000009b38f974/content.htmhttp://help.sap.com/erp2005_ehp_06_hana/helpdata/en/35/26b5d3afab52b9e10000009b38f974/content.htm

  • Volume Control Issue (Satellite L505D-S5983)

    My laptop: Toshiba Satellite L505D-S5983
    So here's the issue:
    Just recently I've started having problems using my volume control located next to the SD card reader slot.. You know, the volume 'slider'. It's been acting rather strangely, when I try to adjust my volume it doesn't change at all from the current volume percentage that it's at... Even when I'm sliding the slider. So then, I have to go into the manual volume in my hidden icons menu to change the volume. However, after I go through this step, I am then able to use my volume 'slider' control, and it actually works. 
    So, I'd like to know:
    A) Why this is happening?
    B) Am I able to fix this issue?
    C) How would I fix this issue?
    ox♥Scairry♥xo

    Still in need of a response.
    ox♥Scairry♥xo

  • Volume and Control Issues

    Just got two new units a week or so ago, both my husband and I have had issues with sweat (apparently) causing the volume to suddenly increase and then the contol no longer works until it dries out. Given the location where apple dediced to place the controls, you would think they would be sealed and water tight.

    That does sound like a major problem as I mainly use my older shuffle in gym. My biggest problem is that I can't wear the type of ear buds that Apple supplies , I need the type that go in to the canal like shures' so can't think about getting the new shuffle. Can't find any place to write Apple direct about it.

  • ITunes volume control issue?

    Ever since I updated my Mac to iTunes 8.2.1 I've noticed that the volume control in iTunes is fixed on about 40% volume. I can drag the control up or down and it changes the volume but it snaps back to where it was when I let go. I can still change the volume on my Mac but it won't go as loud as it could. Any ideas?

    Hey tvas22,
    I will do my best to assist you  in the hopes of resolving the issue with the sound button. The steps that I would start of with first, would be to do a hard reset. I have included the document Performing a Hard Reset or Forced Reset.
    If you are still experiencing the same issue, I would set the communication level to do nothing in the Playback devices option. I have included the steps below for you to follow.
    1. Right click on the Sound icon in the System Tray
    2. Click on Playback devices
    3. Click on Communications
    4. Click on Do nothing
    5. Click Apply, and close the Window
    The next step to do if you are still experiencing the same issue, would be to perform a clean boot on your Split. I have included the document Using Microsoft System Configuration (Windows 8). See if following these steps you are still experiencing the issue.
    Please let me know the outcome of these troubleshooting steps.
    Best of Luck!
    I worked on behalf of HP

  • Parental control issue

    I am unable to unlock the parental controls in iTunes 9.0. I receive the following error message "The parental control preference could not be unlocked because the user "dw00521" does not have administrative privileges." I don't ever remember creating or adding parental controls. I am the only user of this computer. I cannot access the iTunes store or execute home sharing since these items are turned off in parental controls. Would appreciate any help in how to resolve. I've tried uninstalling and reinstalling iTunes without any luck. Thanks.

    Sorry about the delay, JD.
    Okay ... there may also be an issue with the preferences files relating to parental controls too. So rebuilding your preference files may be of some help here.
    The technique you need to fix that is described in the "Remove iTunes Preference files" section of the "User-specific troubleshooting" section of the following document:
    [iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues|http://support.apple.com/kb/TS1421]
    Before starting out on that, set the PC up to view hidden files and folders, as per the description at the beginning of the "User-specific troubleshooting" section.
    *Some heads-ups before proceeding*
    Be careful of any custom preferences (EQ, imports, etc) you have set up. Take a note of those, because rebuilding the relevant prefs returns all such prefs to their default settings. You may need to set up any such preferences all over again.
    You may also need to reinstall any third-party plugins afterwards.
    Things to expect during the pref file rebuild ... moving one set to the desktop (on XP) causes the setup assistant to run during the rebuild. Avoid saying yes if it asks you to import all the media files on your PC into iTunes. Otherwise, you'll end up duplicating all your content in your iTunes library. Moving the other set of prefs to the desktop (on XP) means that you have to agree to the licence agreement again.

  • 24/7 Usage Control Issues

    I recently setup usage controls on my daughter's phone (iPhone 4) and I'm having a few issues, but they don't seem to be something I can easily reproduce.
    She gets calls from different numbers, adults even, that no one knows. I'm assuming that this is because her number was recycled. At any rate, I wanted to restrict her phone such that she can only talk/text with those on the trusted contacts list through usage controls.
    I set up time restrictions (12:00am - 12:00am) to accomplish this, but I wasn't sure how their system would view this. I want it to block everything, 24/7, but I wasn't sure if this would be viewed. Would it be start time restriction and immediately stop it, or, start time restriction and stop at next 12:00am, then immediately start?
    The reason I ask is because it seems to work, but then other times people on her trusted contacts list can't call or text her. Also, she got a text from someone not on her trusted contacts after I set it up, in the middle of the day (several days later). Just the one though.
    Finally, I would like to know how the time restrictions work specifically. I can set these to maybe 12:00am to 11:59pm, there's a minute there unprotected, but I'm not sure if that will matter. If she receives texts while under a time restriction, are they refused or queued? In other words, if she received a bunch of texts through the day from numbers NOT on her trusted contacts list, at 11:59pm is she going to get a flood of texts?
    Thank you all for reading, I would appreciate any advice!

    Adding: the star for the radio works on both lock screen and control center but pause and next do not.

  • Serial Control Issue

    Dear
    we are facing a Performance issue in serial control items...
    like
    while receivng a material to the inventory
    and
    while issuing a material to the sales order
    the management has decided to proceed to no serial control
    before proceeding to that i like to the impact after changing that
    Note:We have Qunatity with serial contal and pending sales order
    Its urgent pls Seniors need ur advice.
    Thanks
    Mujeeb Ahmed

    Dear
    we are facing a Performance issue in serial control items...
    like
    while receivng a material to the inventory
    and
    while issuing a material to the sales order
    the management has decided to proceed to no serial control
    before proceeding to that i like to the impact after changing that
    Note:We have Qunatity with serial contal and pending sales order
    Its urgent pls Seniors need ur advice.
    Thanks
    Mujeeb Ahmed

  • URGENT: WS data control - Issue in Application server 10.1.3.3

    Hi All,
    I created a ADF web service data control and used that data control in an ADF JSPX page. When I tested the page in JDeveloper 10.1.3.3 (Embedded OC4J) it worked fine. But when I deployed the same in Application Server 10.1.3.3. it shows the following exception:
    javax.faces.el.EvaluationException: oracle.jbo.JboException: JBO-29000: DCA-40012: Failed to create a connection to the Web Service
    Similar issue is already posted in the following threads:
    Re: Web sevice data control deploy error.
    http://kr.forums.oracle.com/forums/thread.jspa?threadID=452703&start=15&tstart=240
    There is bug (ID: 5878326 ) raised in Metalink for this. I applied the patch 5878326 as mentioned in the Metalink. But after applying the patch also, the same exception occurs. I deleted connections.xml and then recreated, but no success.
    I also tried to create a new web service data control and used it in a new ADF JSPX page, again it shows the same exception in App Server 10.1.3.3.
    But the bug in Metalink is closed. Please let me if anyone is facing the same issue and the solution for this.

    Please post ADF related issues to the JDeveloper forum -- ADF is a runtime that gets installed on the app server, so the ADF folks are the most likely of all to be able to be of help.
    -steve-

Maybe you are looking for

  • Error in SNC SMI Scenario  - Demand Data is Not Getting Displayed

    Hi All SCM SNC APO Members,                                               For SMI scenario I am sending Stock and Demand data from R/3 to SNC(5.1) System. The Stock data(Safety Sotck, Stock on hand etc) is visible in XML messages but demand is not ge

  • ITunes Music Files Corrupted by Genius and/or iPod Touch?

    After installing an iPod Touch for the first time, and also running Genius for the first time, on my large (199.61 GB) music library (located on a WD MyBook 500 GB external hard drive), all of my music has disappeared according to iTunes. This is bec

  • How to reuse constant mapping in a project?

    Hi, I have a issue here. I have few constant values such as load_date (sysdate), load_by and few other columns. Currently i'm recreating this constant values in each mappings. How do I create a global constant which can be used as plug and map to my

  • How do I get my iphoto to display pictures in grid

    Recently I was trying to change the title of an event in iPhoto and some how my whole iPhoto program got screwed up. Now when I open a event the pictures load ready to edit instead of grid pattern where you can then click and open the photo you want.

  • {Q} Debuging Servlets with VCafe 4.0 using WebLogic as WEB server

    Hi,           I am trying to set up VCafe 4.0 to debug servlets deployed on WebLogic 5.1.           I don't have any problem with default servlet debugging, but I don't know           how to tell VCafe that my WEB Server isWebLogic. Any ideas?