CONTROLLING MODULE ACTIVATED OR NOT
HI Gurus,
How do one check, if controlling is activated?
If it's not then "Could this be activated after posting in GL accounts?
Regards
If you got to the icons then yes it is activated. If no service, I would call your carrier.
Similar Messages
-
For Professional level certification aspirants in SAP Controlling module
Dear all Professional level Certification aspirants in SAP CO module,
I have recently passed the Certification test on SAP Management Accounting (CO) module in version ERP 6.0 EHP4. I have more than 4 years experience in SAP Controlling module.The following are some of my suggestions regarding preparation for the exam.
1. All the questions were scenario based. The exam tests expert level knowledge and real time scenarios in the module. The theoritical knowledge is not sufficient to clear the exam. Unless you have atleast 5 to 6 implementations in Controlling module, it is not advisable to give it a try.
2. Detailed knowledge of the system configuration settings about the various courses mentioned in the syllabus is required. One needs a clear understanding of Special costing functions, ERP integration, Transfer Pricing, Material ledger, New GL Parallel valuation, Planning and Budgeting fuctions in various components etc.
3. The exam tests in-depth knowledge about various integration aspects of Controlling module with other modules. The advanced master data functionalities of other logistical modules like MM, SD, PP, PM, QM, PS, CS, HCM is tested in detail.
4. Several methods of process and performance optimization of the system are also tested.
3. Some reporting aspects of BW and BI are also tested. The cross application aspects of the system are also tested.
4. The exam also tests the real time skills in preparing Blueprints, Business Process design and trouble shooting the system. Being knowledgeable about some of the processing errors and message classes will be of great help.
Hope this information helps you in preparing for the certification.
Should you need any clarifications, please post a reply to this thread and I will post answers.
All the Best!!
VS.Hi Vikrant,
the pass mark for the exam is 58%. However it may be different. The passing mark shown on your screen on the day will be the correct passing mark.
All the questions were scenario based which would involve high analytical skills and through understanding of the system integration. It would be difficult to tell any specific question. The questions carry different weightage. If you answer the questions with less weightage correctly than the questions with more weightage, you end up scoring less though you answer more number of questions correctly. and it is vice versa. Go through your syllabus and cources and try to concentrate on the topic areas which contain more weightage.
Moreover, the exam is not completely technical in nature. It tests a lot of analytical and problem solving skills required on the job.
Note:Please do not ask the questions or contents of the exam as they are confidential.
Hope this information helps you.
All the best for your exam!
Regards,
Vishnu. -
QM Active or Not.. How to chk?
Hi
In a system how can i chk weather QM module active or not?
Weather are they using QM or not?
Wats their QM process?
How can we know the above from the system
VijayHi
It is complete process. please check for the follwing details for a first hand answer to your query.
Quality view- QM procurement active,Inspection set_ups, inside Inspect_up you will notice Inspection types attached to it , here you say what kind of inspection the material has to under go based upon the process. one material can have mulitple inspection types, forexample - 01 - for MIGO against PO, 08- for STO, simliarly a material which is having in_process inspection, can have 04- inpsection type, it goes on and can be set as required. This is only yhe basic check. On its own ths set_up alone will not help you to get the lot created during the processes. there are so many othere activities whch are to be carriedout for this to happen.
Pls check the below link forsome information
[Basics Of QM]
Regards -
CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED
dear all
i get this error when calculating production order cost
control data for activity type 1000\4230\1420 not maintained for fiscal year 2007
i hv maintained data in kp26
can any one pl help. i am learnign sap pp and hv 4.7 version
thanks and regardsDear Anshuman
my prob. started during cost cal. in prod. order first error was version 0 not maintained for fiscal year 2007, THEN i maintained it in the path as told by you T code OKEQ.
but after that error changed to CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED ( 1000/4230/1420)
i maintained data in kp26, but the error is still coming
pl. suggest some solution as i am not able to proceed further.
Thanks and regards
Raj -
my computer (window 7) give me message "photo stream is not enabled. when i go to icloud control panel on computer (icloud version2 ) for activation. its not being activated. i tried many times but failed. when i check the photo stream option and apply its shows that its ok. and after closing when i again open icloud panel the photo stream option remains unchecked that means its not activated. please guide me.
Had the same problem. I uninstalled icloud, restarted my pc and reinstalled icloud and it's working fine. Hope this helps.
-
How to find if Reconciliation Ledger is Active or not for Controlling Area
Hi,
How to find if Reconciliation Ledger is Active or not for Controlling Area?
ThanksHi,
You can check using OKKP.
Further TCode KALA is useful in activating/deactivating etc., for the Controlling Area.
Rgds. -
BIOS - Full Theft Protection module Activation - Current setting Permanently disabled
Hi,
Recently purchased a Lenevo X301 laptop and installed with Windows XP. Unfortunately while changing the BIOS setiings, i have selected permanently disable option for computrance anti theft agent under Security settings.
Now I have settings are as follows..
Full Theft Protection module Activation
Current setting - Permanently disabled
Remote Diaable module activation
Current settin - Permanently disabled
I tried to change it enabled state in several ways, but i am not successful, Could you please help me how to activate computrance agent.
Also one more question, do i need to purchase the Computrace LoJack to activate Anri Theft agent in my laptop.
Your quick response is highly appreciated.Regarding your keyboard problem, it seems to be a very low-level problem. The driver cannot access the Control Registers on the Keyboard. By going down from your error message to the lowest level, one can see that it's probably a simple "outb" operation (write data on a specified address, shouldn't fail if the address is correct...) that doesn't succeed.
So I think you defintely need to look in your BIOS if you didn't deactivate something when upgrading, or messed with some address space, or many things I cannot think of right now.
Good luck -
When will the Controlling module will be updated in Purchasing flow.
Hi,
i want to know when will the controlling module get updated in the Purchasing flow as follows
1.creation of Purchasing order.
2.creating the Goods receipt-GR
3.creating the invoice
4. vendor payment
Please help me.hi
kindly note the date flow to the CO module is based on the account assignmed you use in each of the above transaction.
For example if you use the Account Assignment as 'F' in the PO ME21n, then you need to specify the internal order in the PO.
thus the data in the PO shall move to the Internal Order (a CO object).
Cost assignment objects like Cost Center,profit Center , Internal Orders can be assigned in Line items for each FI document which will result in flow of data to the CO objects.
During vendor payment, the FI entry would be Dr Expense & Cr, Vendor.
If controlling is active and you have assigned the Company code to a controlling area, then you will need to specify the cost center in the expense line item.
this will ensure that data moves to the controlling objects.
hope this helps.
regards
eashwar -
How do I turn off background ni file activity when not using Labview? I use labview rarely, and I also use my computer for demanding multimedia applications, including multitrack digital audio recording. I need to reduce as much background activity as possible, and taking a look with task manager I see files such as nimxs.exe, nipalsm.exe, nipalsm.exe, nisvcloc.exe, and nicitdl5.exe running even when I haven't used Labview (8 I believe). These files run even after I right click the NI icon on the lower right and turn off the application. I would like the computer to boot up without these files, and for the necessary files to be activated only when I start the program.
Can this be done or do I have to remove labview from the system to improve performance?
ThanksHello, those processes are part of running NI services that start when Windows boots. These processes serve varied purposes and stopping them can have undefined and unknown consiquences for your NI products. These products run at "normal" priority meaning that they should be preempted by any process running at a higher priority which I would expect your other application to be doing given their time sensitivity. That being said, in Windows XP (I can't speak for other OSes), you can lower their priorities even greater through task manager (right click the process»set priority) to further remove them from contention for resources. If you want to prevent them from running you can set the service startup type to "manual" in Control Panel»Administrative Tools»Services. Right click the process go to Properties and Under the General tab choose Startup Type»Manual. This will start up the processes only when something directly starts it up. LabVIEW will start these processes up as it attempts to use them. When you shut down LabVIEW you will need to manually shut down these processes through task manager. Again, doing this can cause problems with your NI products on your system and it is not advised.
Travis M
LabVIEW R&D
National Instruments -
[Solved] (WW) fglrx(0): Kernel Module version does *not* match driver.
fglrx has just recently stopped working, and I can't quite pinpoint when that was because I honestly hadn't noticed until checking. I've tried a few reinstalls and different xorg options so far, but had no luck.
glxinfo:
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address, GLX_SGI_video_sync, GLX_ARB_multisample,
GLX_ATI_pixel_format_float, GLX_ATI_render_texture
GLX version: 1.2
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_multisample
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (1.5 Mesa 6.5.2)
OpenGL extensions:
GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_blend_color,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_lod_bias
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x23 24 tc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x24 24 tc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x25 24 tc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x26 24 tc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x27 24 dc 0 24 0 r y . 8 8 8 0 0 16 0 0 0 0 0 0 0 None
0x28 24 dc 0 24 0 r y . 8 8 8 0 0 16 8 16 16 16 0 0 0 None
0x29 24 dc 0 32 0 r y . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
0x2a 24 dc 0 32 0 r . . 8 8 8 8 0 16 8 16 16 16 16 0 0 None
Xorg.0.log:
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux yggdrasil 2.6.21-ARCH #1 SMP PREEMPT Mon Jun 11 23:47:51 CEST 2007 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 11 10:14:15 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "gb"
(**) XKB: layout: "gb"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "mx518"
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic,
/usr/share/fonts/Type1,
/usr/share/fonts/TTF
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AIGLX" "off"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c44a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0269 card 1043,8122 rev 80 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1106,1269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:2: chip 1106,2269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:3: chip 1106,3269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:4: chip 1106,4269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:7: chip 1106,7269 card 1043,8122 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1102,0004 card 1102,2002 rev 04 class 04,01,00 hdr 80
(II) PCI: 00:0a:1: chip 1102,7003 card 1102,0040 rev 04 class 09,80,00 hdr 80
(II) PCI: 00:0a:2: chip 1102,4001 card 1102,0010 rev 04 class 0c,00,10 hdr 80
(II) PCI: 00:0e:0: chip 1317,0985 card 1317,0574 rev 11 class 02,00,00 hdr 00
(II) PCI: 00:0f:0: chip 1106,3149 card 1043,80ed rev 80 class 01,04,00 hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1043,80ed rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1106,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1106,3104 rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1043,80ed rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1043,810d rev 60 class 04,01,00 hdr 00
(II) PCI: 00:11:6: chip 1106,3068 card 0000,0000 rev 80 class 07,80,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e48 card 1002,0002 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4e68 card 1002,0003 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000b (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfd900000 - 0xfdefffff (0x600000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0x9ff00000 - 0xbfefffff (0x20000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] rev 0, Mem @ 0xb0000000/27, 0xfde00000/16, I/O @ 0xd000/8, BIOS @ 0xfdd00000/17
(--) PCI: (1:0:1) ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary) rev 0, Mem @ 0xa8000000/27, 0xfdc00000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[1] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[2] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[3] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[5] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[6] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[7] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[8] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[9] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[12] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[13] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[14] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[15] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[18] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[19] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[20] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[21] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[22] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[23] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[24] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[25] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[26] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[1] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[2] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[3] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[5] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[6] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[7] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[8] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[9] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[10] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[11] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[12] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[13] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[14] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[15] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[16] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[17] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[18] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[19] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[20] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[21] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[22] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[23] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[24] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[25] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[26] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[17] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[18] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[19] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[20] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[21] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[23] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[24] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[25] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[26] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[27] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[28] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[29] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[30] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[31] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[32] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "fglrx"
(II) Reloading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) LoadModule: "keyboard"
(II) Loading /usr/lib/xorg/modules/input//keyboard_drv.so
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.38.6
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.38g1
(II) ATI Proprietary Linux Driver Build Date: Jun 22 2007 13:10:21
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.38.1.1.2.3-driver-lnx-x86-x86_64-351593
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x4E48) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[17] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[18] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[19] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[20] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[21] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[23] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[24] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[25] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[26] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[27] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[28] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[29] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[30] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[31] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[32] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x81e4088
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[5] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[6] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[7] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[8] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[9] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[10] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[11] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[12] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[13] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[20] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[21] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[22] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[23] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[24] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[25] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[26] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[27] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[28] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[29] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[30] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[31] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[32] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[33] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[34] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[35] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(WW) fglrx(0): Bad V_BIOS checksum
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "RADEON 9800 PRO" (Chipset = 0x4e48)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xb0000000
(--) fglrx(0): MMIO registers at 0xfde00000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI R360
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: R360
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules//libddc.so
(II) fglrx(0): Connected Display1: DFP on internal TMDS [tmds1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: AIC Model: 9450 Serial#: 329
(II) fglrx(0): Year: 2006 Week: 33
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 37 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing not preferred mode in violation of standard!(II) fglrx(0): redX: 0.647 redY: 0.346 greenX: 0.298 greenY: 0.591
(II) fglrx(0): blueX: 0.150 blueY: 0.118 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 70 vid: 35457
(II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 72 vid: 35969
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 135.0 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 25.2 MHz Image Size: 376 x 301 mm
(II) fglrx(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800 h_border: 0
(II) fglrx(0): v_active: 350 v_sync: 387 v_sync_end 389 v_blanking: 449 v_border: 0
(II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: F-419
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff000523509449010000
(II) fglrx(0): 2110010380251e78e8e595a5584c9726
(II) fglrx(0): 1e5054bfef808180818a818c01010101
(II) fglrx(0): 010101010101bc34009851002a403070
(II) fglrx(0): 1300782d1100001ed60980a0205e6310
(II) fglrx(0): 10605208782d1100001a000000fd0032
(II) fglrx(0): 4b1e500e000a202020202020000000fc
(II) fglrx(0): 00462d3431390a2020202020202000ba
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - DFP on internal TMDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay not supported on this hardware
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 37 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480" 38.16 1024 1048 1152 1280 480 481 484 497 +hsync
(**) fglrx(0): Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 31.48 848 864 952 1056 480 481 484 497 +hsync
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "640x350" 25.18 640 656 752 800 350 387 389 449 +vsync
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (370, 300) mm
(--) fglrx(0): DPI set to (87, 86)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 29.6 MHz (scaled from 0.0 MHz), 29.8 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "800x600" 29.60 800 816 896 992 600 601 604 635 interlace +hsync
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.76 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.67 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480" 38.16 1024 1048 1152 1280 480 481 484 497 +hsync
(**) fglrx(0): Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480" 31.48 848 864 952 1056 480 481 484 497 +hsync
(**) fglrx(0): Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576" 32.66 720 744 816 912 576 577 580 597 +hsync
(**) fglrx(0): Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480" 26.71 720 736 808 896 480 481 484 497 +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "640x350": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "640x350" 25.18 640 656 752 800 350 387 389 449 +vsync
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384" 19.81 512 544 624 664 384 451 453 497
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 300 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 300 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 240 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 240 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 200 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 200 457 459 524 doublescan
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.1
(==) fglrx(0): HPV inactive
(**) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000000f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) LoadModule: "glesx.so" (glesx)
(WW) LoadModule: given non-canonical module name "glesx.so"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension GLESX
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b]
[1] 0 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xfe600000 - 0xfe6000ff (0x100) MX[b]
[7] -1 0 0xfeb00000 - 0xfeb003ff (0x400) MX[b]
[8] -1 0 0x50000000 - 0x50003fff (0x4000) MX[b]
[9] -1 0 0x50004000 - 0x500047ff (0x800) MX[b]
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[11] -1 0 0xfdc00000 - 0xfdc0ffff (0x10000) MX[b](B)
[12] -1 0 0xa8000000 - 0xafffffff (0x8000000) MX[b](B)
[13] -1 0 0xfdd00000 - 0xfdd1ffff (0x20000) MX[b](B)
[14] -1 0 0xfde00000 - 0xfde0ffff (0x10000) MX[b](B)
[15] -1 0 0xb0000000 - 0xb7ffffff (0x8000000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[19] 0 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
[23] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
[24] -1 0 0x0000ef40 - 0x0000ef5f (0x20) IX[b]
[25] -1 0 0x0000ef20 - 0x0000ef3f (0x20) IX[b]
[26] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[b]
[27] -1 0 0x0000eec0 - 0x0000eedf (0x20) IX[b]
[28] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[b]
[29] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[30] -1 0 0x0000eeb0 - 0x0000eebf (0x10) IX[b]
[31] -1 0 0x0000ef80 - 0x0000ef83 (0x4) IX[b]
[32] -1 0 0x0000ef68 - 0x0000ef6f (0x8) IX[b]
[33] -1 0 0x0000ef84 - 0x0000ef87 (0x4) IX[b]
[34] -1 0 0x0000ef88 - 0x0000ef8f (0x8) IX[b]
[35] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[36] -1 0 0x0000efe0 - 0x0000efe7 (0x8) IX[b]
[37] -1 0 0x0000ed80 - 0x0000edbf (0x40) IX[b]
[38] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b](B)
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.0.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xb4000
(II) fglrx(0): [drm] mapped SAREA 0xb4000 to 0xb7282000
(II) fglrx(0): [drm] framebuffer handle = 0xb5000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.37.6
(II) fglrx(0): Date: May 25 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xb4000 at 0xb7282000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xb0000000 FBMappedSize: 0x08000000
(==) fglrx(0): Write-combining range (0xb0000000,0x8000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 7167
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) fglrx(0): GLESX enableFlags = 0
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Using hardware cursor
fbarea0->box.x1 0x00000000, fbarea0->box.y1 0x00000404
fbarea0->box.x2 0x00000500, fbarea0->box.y2 0x00000406
icon[0].start=0x505000
fbarea1->box.x1 0x00000000, fbarea1->box.y1 0x00000406
fbarea1->box.x2 0x00000500, fbarea1->box.y2 0x00000408
icon[1].start=0x508000
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
[glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
(**) Option "CoreKeyboard"
(**) Keyboard0: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "gb"
(**) Keyboard0: XkbLayout: "gb"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) mx518: Device: "/dev/input/mice"
(**) mx518: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) mx518: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "10"
(==) mx518: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) mx518: ZAxisMapping: buttons 4 and 5
(**) Option "ButtonMapping" "1 2 3 6 7"
(**) mx518: Buttons: 14
(**) Option "Resolution" "800"
(**) mx518: Resolution: 800
(II) XINPUT: Adding extended input device "mx518" (type: MOUSE)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) mx518: ps2EnableDataReporting: succeeded
xorg.conf:
Section "ServerLayout"
Identifier "Xorg"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "mx518" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AIGLX" "off" # Disable AIGLX
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
# Fonts
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "drm"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
Load "fglrx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
# Options
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
# Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "mx518"
Driver "mouse"
# Options
Option "CorePointer"
Option "Resolution" "800"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "10"
Option "ButtonMapping" "1 2 3 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "AG Neovo"
ModelName "F-419"
HorizSync 24.0 - 80.0
VertRefresh 50.0 - 75.0
# Options
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Card0"
VendorName "All"
BoardName "All"
Driver "fglrx"
# Options
# Option "XAANoOffscreenPixmaps" "true"
# Option "AGPMode" "8"
# Option "ColorTiling" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
#Section "Extensions"
# Option "XEVIE" "Enable"
# Option "Composite" "Enable"
#Endsection
Would it be possible to explain the other warnings in Xorg.0.log? Rather curious about those apart from the obvious one, too.
Thanks.
Last edited by Newnux (2007-07-11 16:04:15)Indeed, that seems the end-all error of it all.
I'll summarise my warnings, some for curious reasons:
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) # What's this?
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found # Not a problem.
(WW) fglrx(0): Only one display is connnected,so single mode is enabled # No problem.
(WW) fglrx(0): Kernel Module version does *not* match driver.
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
Anyway, I wondered about versions and noticed this:
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xbc000
(II) fglrx(0): [drm] mapped SAREA 0xbc000 to 0xb7285000
(II) fglrx(0): [drm] framebuffer handle = 0xbd000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.37.6
(II) fglrx(0): Date: May 25 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver. # included to show where this was displayed
All versions previous to that show 8.38.6:
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.38.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
So I assume I have an old version dotted around somewhere, but I'm not sure about how it's all loaded and such.
Now, quoting something I'd come across a few times and taking it from thinkwiki:
If you lose hardware acceleration after a driver update this can be caused by an old fglrx kernel module being loaded.
Check out /var/log/Xorg.0.log for a message like:
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
You can verify this yourself by looking at the version message some lines above. It should read something not matching the installed version like:
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.10.19
The cause for this trouble might be that there resist multiple versions of the fglrx module within the kernel module search path.
Go to /lib/modules/<your linux kernel version>/ and type # grep fglrx modules.dep.
If grep finds multiple lines you nailed down the problem. All you have to do now is to delete any versions of the module (look at the filedate) but the most current one. Then run # depmod and you are done.
Hint:
Newer versions (8.21.7) of the fglrx module seem to be installed in the extra/ subdirectory.
Older versions (8.19.10) used to be located in the kernel/drivers/char/drm/ subdirectory.
How does this apply to Arch? I only found one instance of fglrx by using that method.
Edit: Forgot to add that I've tried reinstalling a few times, it doesn't really seem to do anything. Wondering if I should attempt to install an older version or something, but I don't get why the driver numbers don't match for me. Surely others have updated their drivers too.
Last edited by Newnux (2007-07-11 13:28:55) -
How to find out whether USER-EXIT is active or not
Hello!
How can I find out whether USER-EXIT is active or not ?
I set a break-point at these points and nothing happens
if I want save my daocument ???
Why
PERFORM USEREXIT_SAVE_DOCUMENT.
PERFORM USEREXIT_SAVE_DOCUMENT_PREPARE.
Ragards
IlhanHi Ilhan
The easiest way, I guess, is by going to transaction SMOD, sticking in your enhancement name and pressing the test button.
When placing breakpoints, don't use <b>Breakpoints > Breakpoint at > Statement...</b> and enter
PERFORM USEREXIT_SAVE_DOCUMENT
because you won't get any hits since the function module names are stored dynamically.
Rather use <b>Breakpoints > Breakpoint at > Function Module...</b> and enter
USEREXIT_SAVE_DOCUMENT
for a better chance of hitting the breakpoint.
Cheers
Lyal
Message's terrible grammar was edited by:
Lyal Schumann -
How to check weather a material created is active or not
Dear Friends
1 How to check weather a material created is active or not.
2 MIGO standard document has a check button, can we have similar check button in other documents like Purchase requisition.
3 In case of material valuation is Standard (Price control), the costing is done on the basis of the Standard Price or actual cost of the raw material.
I will be thankful for your advice.
Sanjeev1 How to check weather a material created is active or not.
There is a Blue "i" button for the Material, pls click that it will show you the current status..
2 MIGO standard document has a check button, can we have similar check button in other documents like Purchase requisition.
for PR you can see the check button( CtrlShiftF3) beside personal settings -
Inserting rows in table control(Module pool)!!
Hi,
Pls provide me with some code sample for inserting rows in a table control (module pool)...
Regards
GunjanHI
Y dont u create a TABLE CONTROL using wizard and copy the coding-
TRY THIS-
WHEN 'INSR'. "insert row
PERFORM FCODE_INSERT_ROW USING P_TC_NAME
P_TABLE_NAME.
FORM fcode_insert_row
USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_LINES_NAME LIKE FELD-NAME.
DATA L_SELLINE LIKE SY-STEPL.
DATA L_LASTLINE TYPE I.
DATA L_LINE TYPE I.
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE CXTAB_CONTROL.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <LINES> TYPE I.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: get looplines of TableControl *
CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_LINES_NAME.
ASSIGN (L_LINES_NAME) TO <LINES>.
*&SPWIZARD: get current line *
GET CURSOR LINE L_SELLINE.
IF SY-SUBRC <> 0. " append line to table
L_SELLINE = <TC>-LINES + 1.
*&SPWIZARD: set top line *
IF L_SELLINE > <LINES>.
<TC>-TOP_LINE = L_SELLINE - <LINES> + 1 .
ELSE.
<TC>-TOP_LINE = 1.
ENDIF.
ELSE. " insert line into table
L_SELLINE = <TC>-TOP_LINE + L_SELLINE - 1.
L_LASTLINE = <TC>-TOP_LINE + <LINES> - 1.
ENDIF.
*&SPWIZARD: set new cursor line *
L_LINE = L_SELLINE - <TC>-TOP_LINE + 1.
*&SPWIZARD: insert initial line *
INSERT INITIAL LINE INTO <TABLE> INDEX L_SELLINE.
<TC>-LINES = <TC>-LINES + 1.
*&SPWIZARD: set cursor *
SET CURSOR LINE L_LINE.
ENDFORM. " FCODE_INSERT_ROW
HOpe this helps u
Regds,
Seema. -
With out Controlling module configurations, can we Configure PP module dire
< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. Use an appropriate title. >
Hi Experts,
With out Controlling module configurations, can we Configure PP module directly?
Thanks
ChandraHi,
Yes you can configure PP with out CO but you will not get Product Costing results for the materials used.
You will not be able to link Activities, Cost Centers, Over Heads which are production activities.
Cost Analyisis for the Order will not be possible.
To say in brief Cost related entries or break up is not possible if CO is not implemented.
Regards
Balaji -
Dynamic rows increment according to user input in Table Control Module Pool
HI All,
I'm doing a Table Control module pool Program. Now suppose there are two fields - MATNR & MAKTX.
Our requirement is while weu2019ll give the material No (MATNR field), material desc. will be populated in corresponding field (MAKTX field),
Now the problem is, while we are entering Material No. in 1st row it is Material Desc. coming in to corresponding field but while the data is given to next row it replaces the 1st rows data .
eg - ............................... ........ MATNR.............................MAKTX
1st entry in 1st row ..................... 23................................... XXX --after pressing 'ENTER' mat desc XXX comes. now 2nd entry in 2nd row 24 .............................. YYY --after pressing 'ENTER'
1st row details like MATERIAL NO(23) & Desc(XXX) got deleted & that is replaced by 24 YYY
We can not extend that no. of rows of Table Control Table more than one row.
If you kindly help me how it is possible to increase the no. of rows of that table dynamically without replacing the previous row it will be very helpful for me.
Thanks & Regards,
BiswajitHi Biswajit,
This probably means that the table control PAI is modifying the first line always in the internal table instead of current line
eg: we wite the code
loop at screen and then modify the internal table with current line
table_control => name of table control as given on screen
in PAI of the screen
loop at internaltable.
modify internaltable index table_control-current_line .
put a break point here and see*
it will always be updating the first record because of some reason - logic error or coding error*
endloop.
Also in PBO we can see that the internal table will be having just one record after the action mentioned above....it is a case of overwrite
To simply increment the number of lines
table_control-lines = table_control-lines + 1. in PAI
Pls check and revert
Hope it helps
Regards
Byju
Maybe you are looking for
-
The only way I can get the camera to work is by turning the phone off at the top, then instead of 'sliding to open' I slide the camera picture up the screen. This opens the normal camera and I can take pictures. What have I altered, and how can I r
-
Hi, What would be the most simple way to resolve number of http sessions of certain web application deployed to standalone oc4j using remote host and command line? Any good suggestions?
-
Date format for the RES.PdtePerKey parameter in FDM
Hi I am using FDM 11.1.2.1 to load data from Oracle eBS 11.5 to Hyperion Planning 11.1.2.1. I have created a BefExportToDat event script using the parameter RES.PdtePerKey, which contains the period loaded. On the development environment, the script,
-
The requested item could not be found...
My phone is one of the tested for Firefox Mobile (Xperia X10), and yet I keep getting the "The requested item could not be found" when trying to download it...
-
I have mac osx version 10.4.11 dose anyone know what version is the next upgrade and how much it will cost me. thanks