Controlling Multiple PRI T-1's with 1 d Channel

We are connecting a Redcom IGX to three Cisco 3745 routers (12.4(7g) ios) with 13 T-1's using MGCP and a Call manager running 4.1. We just converted to PRI using 4ESS between the two. The redcom has a way to control (span) up to 5 T-1's using one D Channel, is it possible to control (span) multiple T-1's using one D Channel on the call manager?

Hi Justin,
Teodor is correct here (nice one T!) NFAS is only currently supported with h.323 not MGCP.
Here is a Cisco note indicating this as well as a couple of config docs;
From Esteban @ Cisco;
http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K10070486
From Milan;
http://www.cisco.com/warp/public/793/access_dial/quadt1_nfas.html
From Chris;
http://www.cisco.com/warp/public/793/access_dial/quadt1_nfas.html
Hope this helps!
Rob

Similar Messages

Control multiple apple tv units with 1 remote app

Is it possible to control multiple apple TV units with 1 remote app on an iPhone/iPad? I have apple tv at home, set up under my own personal apple id. I have an apple tv unit at work which I want to use, but that uses our work apple id. can I control both units without having to log out of my personal id and then log into the work one?

On the ATV menu itself there is an option to name the ATV.
Does that not do it for you?

Using airport utility to control multiple speakers at the same time

Can I use the aiport utility on my Ipod to control multiple speakers/airport express units at the same time? I am able to do this directly in ITunes but when I use my Ipod as the "remote" by using the airport utility it only seems to allow me to play music on one set of speakers at a time. If I stream music to one set of speakers and then select a different set it stops the music that was going to the first set in order to stream it to the second set. I hope that this is just user error and not a limitation of the airport utility because I just purchased a brand new Ipod in order to be able to do this (airport utility wasn't compatible with me 2nd Gen). Thanks in advance for any help!

If you have not already done so, now would be a good time to perform a complete power cycle of the entire network.
Power off all devices...modem, routers, computers, etc....in any order that you wish
Wait a few minutes
Power up the modem first, and let it run 2-3 minutes by itself
Power of the wireless router connected to the modem next the same way
Power of the other AirPort routers one at a time about a minute apart
Keep powering up devices one at a time about a minute apart until the entire network is back up
Check the network

Using a single remote app to control multiple Apple TVs

Can you use the remote application which is loaded on my IPad 2 to control multiple ATVs independently? If so, how is this done.

Yes you can.
I have a mixture of AppleTV 1 and 2 and several itunes libraries.
The top level screen lists all devices/itunes libraries - when you choose one it enters the control mode for that and app tends to restart with that iTunes library or AppleTV device. Press icon that looks lie 2 overlapping squares with rounded edges on top left of display to get back to top level screen.
AC

How can I allow the application to line through a field that has been locked after being digitally signed? We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once

How can I allow the application to line through a field that has been locked after being digitally signed?
We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information. However we are receiving an error when attempting to enter data in the field which we have this edit. Error property: line through cannot be set because doing so would violate the document permission setting. any idea how we can get around this issue?

You can control which fields are locked down after signing by setting up a collection. Then those that are not locked can be changed after signing. If this is not possible, then the line outs must occur prior to signing.

Control multiple updates and queries within one transaction in JPA

Hi,
I have a question regarding control multiple updates and queries within one transaction. We are using EclipseLink 2.3.1. With below code, will I be able to:
- have all insert, update, select queries committed in one transaction;
- queryGetBalance will return the latest OrgBalance after update;
- if one fails, everything rolls back.
Thanks!
Jeffrey
PS: I realized that I cannot use em.getTransaction().begin() and em.getTransaction().commit(), since I am using JTA.
=============
@PersistenceContext(unitName="Test")
EntityManager em;
em.setFlushMode(FlushModeType.COMMIT);
newTransaction.setAmount(1000);
newTransaction.setType("check");
em.persist(newTransaction);
orgAudit.setUpdateUser("Joe")
orgAudit.setupUpdateTime(time);
em.merge(orgAudit);
Query queryUpdateBalance = em.createQuery("update OrgBalance o set o.balance = o.balance + :amount where orgId = :myOrgId");
queryUpdateBalance.setParameter("amount", 1000);
queryUpdateBalance.setParameter("myOrgId", 1234);
Query queryGetBalance = em.createQuery("select OrgBalance o where o.orgId = :myOrgId");
queryGetBalance.setHint("javax.persistence.cache.storeMode", CacheStoreMode.REFRESH);
queryGetBalance.setHint("javax.persistence.cache.retrieveMode", CacheRetrieveMode.BYPASS);
queryGetBalance.getResultList();
em.flush();
Edited by: JeffreyW on Dec 12, 2011 10:34 AM

Yes, the operation will be in a single transaction, assuming you are using a JTA managed SessionBean and the code is part of a SessionBean method.

Controlling multiple devices theory

I have an application theory I would like to get some input on.
Take an application like a Servo Engine.vi, it controls communication with the servo and dequeues any servo commands from the main.vi to control the servo.
Now my question is if you have multiple servos:
- Is it best to only have 1 engine running and pass the Axis number through the queue?
- Is it best to run the engines reentrant, so each one handles each servo?
I have done this both ways in the past I really don’t know which way is better.
Thanks, Doug

nonecure wrote:
Now my question is if you have multiple servos:
- Is it best to only have 1 engine running and pass the Axis number through the queue?
- Is it best to run the engines reentrant, so each one handles each servo?
Having 1 engine for controlling multiple servo, it sounds simple
-> probably array of custom data-type can be used
-> Servo engine could be an action engine.
Now the only issue I see here, slight latency is expected while controlling multiple servo drives.
Now moving to, have reentrant engine (multiple clones running, dedicated to each servo), it requires somewhat more coding and is slightly complex
-> mechanism to address & communicate with the right clone (corresponding to a particular servo drive) needs to be implemented and that is an overhead
but on the other hand independent engine clones will have negligible latency.
Lets wait and listen from some of the experts available on board...
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

Controlling multiple relays on PXI 2569 simultaneously using LabVIEW

Hi,
Can anyone please tell me how do I control multiple relays in the PXI 2569 general-purpose raley module? I can't find the example for it. At the moment, the example I have is for controlling individual relay which is only for open/close one relay name at a time.
However, I need to use all the 100 relays and they got to be controlled at the same time.
Kind Regards,
Kieren

The attached snippet doesn't seem to do the trick.
Attachments:
Test 2569 relay control with DAQmx using Digital Out.png ‏36 KB
Test 2569 relay control with DAQmx using Digital Out.vi ‏19 KB

Same application showing multiple times (multiple versions?) in Open With menu

Hello, this has been bugging me for a while, and I hope someone has a clue as to why it is this way.
I know VLC is not Apple software, but my question is not about the player but the Open With menu/window.
As you can see in the photo, when I choose a file to Open With a series of applications, I get more "versions" of VLC I don't know why only VLC and not the others.
I have the 2.0.6 version if it can be of any help, and before my latest update I only had 3 in that menu, now I have 4 VLC's so to speak.
Even before that, before previous updates, I had 2 VLC's in the Open With menu.
It looks like with every update I get some sort of duplicate, in this menu...I don't know why and why only with VLC.
I do not have multiple copies of the program, nor multiple versions.
There is just one and that is the latest version, 'cause older ones get automatically replaced in the Applications folder once the new one is installed.
Why do I only see 1 VLC in the Applications folder, Launchpad, and anywhere else, but I see multiple ones in the Open With menu?
Anyone have an idea?
Should I delete something somewhere maybe leftovers of previous versions or something?
I don't want a huge list, at some point.
Thank you!

You need to rebuild your launch services database.
Open a terminal window (it's in utilities).
Copy and paste this line in terminal:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user
and hit return.
Then relaunch Finder (control-option-click the Finder icon in the dock).

Need Help Audio Amplitude Output Controlling Multiple Parameters

What I am trying to accomplish here is having one audio track effect multiple parameters, obviously all of the parameters would be slightly different so I'm not just making duplicates of one object.
Anyways, is there a way to use the audio amplitude to effect multiple parameters. I want to only have to analyze the audio one time, and then have that analyzation control multiple things. I've tried a Rig, but that doesn't seem to give me the options I need to configure this.

First of all, it doesn't "hurt" anything to have mulitple audio behaviors added to parameters. It doesn't duplicate the audio in any way. What IS the PITA, is you really have to wait for the audio behaviors to "process" (all the way to 100%) because if they're interupted, they'll often NOT finish creating the keyframes all the way to the end of the project.
You can easily add Link Behaviors to anything that is already under audio pararmeter control. You can chain them indefinitely.
However, one good example that might be coincidentally convenient is to create a Number Generator, turn off Animate and link the audio to the Value. Make sure, in the audio behavior to set the Scale value to the maximum value you will need (default is 1 and number values from 0 to 1 are not terribly useful for most things in Motion.) You can subsequently link other parameters to the Number's Value (Object.Numbers.Value from the Source Parameter dropdown in the Link Behavior). You can use the Value offset and Scale parameters in the link behavior to "shape" the behavior for each subsequent parameter under control. The sometimes useful side effect is that you have a visual number to monitor (you can set its opacity to 0 to hide it for the final project appearance.)
For the image below, I created two Number generators and linked the same audio file to each, setting the left number value to the Left Channel of the audio and the right number value to the Right Channel of the audio. I created a small rectangle and created two Replicators off of it (Shape: Rectangle/Tile Fill/Columns 1/Rows 15/ Origin Bottlom). I used Color Over Pattern to color the "audio meter" effect and a Sequence Replicator with an Opacity parameter, Sequencing To, Traversal Custom and to the Location parameter, I linked each back to the corresponding Number Value (Scaled to 100 for percent in the Audio behaviors). The Link behavior to each Location has the Value Offset set to -100 [location works from -100% to 0%].
You could link any number of parameters to the Number Values, and not have the audio parameters re-analyze all the time.

Can I use my Maschine knobs to control multiple instruments "smart controls" in LPX independently?

Can I use 1 hardware contoller to control multiple instruments "smart controls" in LPX? For example....if I mapped 1 instrument's smart controls to my maschine contoller would it overwrite them if I mapped another instruments smart controls to them? I'm wondering if I can switch between mapping's based on which instrument/track I have selected. I know I can do this with quick learn feature....problem is you can only use 1 knob with it.

Thank you for your help, my example is working. Please look the my revised example and let me know if I'm making it more complicated than necessary. In order for it to work,
1. I created a cluster on my front panel to hold the control group reference numbers,
2. Converted it to typedef,
3. Used bundle with name to stuff the control reference numbers into my RefCluster,
4. Used the RefCluster typedef in my subVI,
5. In the subVI, I had to add a variant to data command before using the data.
I also extended the example to actually change values on the front panel to verify that it worked as I intended.
Ken
Attachments:
typedefexample2.zip ‏28 KB

HT4325 Can anyone please tell me if there is an app that allows me to control multiple speakers on my iPad, iPhone or IPod?

Can anyone please tell me if there is an app that allows me to control multiple speakers, via multiple airport express, on my iPad, iPhone or IPod? Thanks!

You can use the camera connection kit to connect, but there's no protocol for any sort of data or file transfer beyond properly named photos and videos. You can plug them in but they won't do anything.
The only printing the iPad natively supports is air print to specific printers, or printing to wifi printers with third party apps. You cannot use flash drives for data transfer (beyond the mentioned photos and videos)

One task control multiple DAQ modules

Is it possible to have one task control 2 or 3 DAQ modules? I do not seem to have luck in doing so.
Also, for a digital output NI device that sources voltage, if I hook up 10v to it and the module has 10 channels, how on earth are the 10 channels each able to source 10V, when I only supply one 10v power supply.
Does it just send extremely small amounts of current per channel versus sending a decent amount of current per channel if I just had one output on?

Hey all,
This is a crosspost, I posted somewhere else after posting this post, just because I did not know whether I posted in the right place, here is the link to the other in case anyone else comes across this problem: http://forums.ni.com/t5/Multifunction-DAQ/one-task-control-multiple-DAQ-modules/td-p/3170766 Sorry about that.
Anyways, I have
NI 9401,
NI 9403,
NI 9474,
NI 9375,
I am using a
NI cDAQ-9184 chassis
I believe these are all compactDAQ.
I would like to combine the 9401 and 9403 into 1 task, and the 9474 and 9375 into 1 task.
Also, I am having issues with one of the modules, the 9375. When I wire False data to the Write DAQ on LabVIEW it seems that the 9375 is still sourcing some voltage. I cannot remember the difference in voltage of then I wire true data versus false, But I believe they were somewhat close. Has anyone came across a problem like such?

I have one apple ID and multiple family members share this with their devices. How do we keep pics and messages separate?

I have one apple ID and multiple family members share this with their individual devices. How do we keep pics and messages separate for each device?

For messages
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime
For other issue:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities

Safari, chrome and firefox cannot verify identity of secure websites after upgrading to 10.7.4, apple engineers have tried multiple things including operating system with no success

safari, chrome and firefox cannot verify identity of secure websites after upgrading to 10.7.4, apple engineers have tried multiple things including operating system with no success

There are several threads about this problem, most notably one called 'Invalid Certificates' is over 4 pages long. Many of us have experienced difficulty connecting to banking and other secure sites. On my Macbook Pro, I cannot get to my banking site with any browser, however I can get there on my iMac using Safari, but get the 'Invalid Certificate' notice with FF and Chrome. The problem started after the installation of 10.7.4. I have sent a message to Apple--they will be dismayed to hear that I cannot complete an order at their online store!

Controlling Multiple PRI T-1's with 1 d Channel

Similar Messages

Maybe you are looking for