Controlling RealPlayer 10 with Rem

I have a creative Extigy with the remote RM-000, and i want to be able to controle real player 0 with it. i have tried this before you have to write a .key file that converts the key pressed into an asci code. but i cant seam to get it to work with real player, as the short cut keys are ctrl+p for example. also how does the remote recognise the key file to use, does it have to be named the application name, of the exe file name or what. Any info would help or even better has any one got a working one, for real player, they could send me.
Regards Olly

hi,
i wrote a wiki, but its in german... sorry.
http://sbrc.pbwiki.com/

Similar Messages

Can I use ARD to control my mac with Back to my Mac service?

Can I use ARD to control my mac with Back to my Mac service?
The with Back to my Mac service on you see your mac in the Shared column, hit Share Screen & your good - on ARD I don't see my remote Mac listed anywhere in that program.
Thanks

ARD, to the best of my knowledge, does not work via Back To My Mac. Certainly it's not an direct or obvious feature, though I can't say that there might not be a workaround I've not heard of.

I have a Text control string box with some initial text. I would like to highlight old text with click of mouse and type in new data from keyboard

I have a text control string box with some initial text (says: Please enter Name). I would like the operator to click on the text control box and have it automatically highlight so that when new data is typed in the old erases (all at once) and the new data is now in the text box.
I tried using the "Text.Selection" property node and when I run it and put the mouse inside the text box the initial text is highlighted and if I press "delete" on the keyboard or if I start to type in new data the initial data does delete but once I start to type new characters they erase each other. For example if I want to type in “Willi
am” I type the “W” and then the “I” but the “I” erases the “W” and now I am only left with an “I” in the text box and so on. I appreciate any help

It seems you are continuously setting the property node over and over again. This should only happen once if you mouse over it.
Create a property node for your text control with the following three items:
(1) KeyFocus (wire a "true" constant to it)
(2) Text.SelStart (Wire a "zero" constant to it)
(3) Text.SelEnd (Wire a constant containing the string length of the text).
Put this property node inside an event structure, triggered by "Mouse enter" on the string control.
(see if the attached example works for you)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Enter_Name.vi ‏23 KB

I can not control my cursor with the trackpad. It moves randomly. It began after an Angry Birds update. Anyone else have this problem?

I have a late 2011 OS X Lion 10.7.4 that is only 6 months old. For the first 4 months I had no problems, but then about 6 weeks ago I downloaded an Angry Birds update from the Apple App Store, and my problems began. When playing Angry Birds the the new Angry Birds update for the first time the cursor began to jump around, moving on it's own as if someone else was controlling it. After a few moments I became obvious I could not control the cursor with the trackpad. When I placed the tip of my finger gently in the center of the trackpad to try to hold the cursor still it becan switching from the game (desktop) to launchpad and mission control. I then put the computer down so I was not even touching it, walked several feet away and the cursor still moved on it's own.
I've done a lot of research over the last few weeks on related articles and realized this is a common problem with numerous different causes: PRAM settings,
screen sharing, remote settings, having fingers accidently touch edges of trackpad, writst resting too close to trackpad, swollen battery, etc. and I don't think it's due to any of those issues.
The problem came out of nowhere. My computer stays at home, and is not used by anyone else. At first it was just Angry Birds, but now it can happen at any time. Sometimes hours or days go by when this does not happen, sometimes it happens so much I can't use the computer at all. It can get so bad that I won't be able to click out of whatever I'm doing on my desktop, and I'll have to shut it down by holding the power button.
Has anyone else had this issue after updating Angry Birds?

try a new/fresh apple brand cable and make sure it is the only usb cable in use. this worked for me, i noticed i had no problem with a lighting cable. i did a restore from scratch and from backup and it did not help me...and if you cant sync than you wont be able to get anything but apps back after the restore

WIth LabVIEW how do I control an instrument with a RS232 output, using a RS232 to USB converter cable.

WIth LabVIEW how do I control an instrument with a RS232 output, using a RS232 to USB converter cable since I dont have rs232 ports. I have two instruments that I want to control in this manner. One is an Imada ZPS force gage with RS232 output. The other is a Panasonic HL-G103-S-J laser micrometer sensor which is RS422. I've done considerable LabVIEW programming using GPIB but I have no experience with devices like these. Any tutorial or examples would be greatly appreciated.
Thanks.
Solved!
Go to Solution.

I understand that you want to control a device which having RS 232 port as output. If so, you can use an USB-RS232 cable from PC to device and you can control or monitor the device.
See this link http://zone.ni.com/devzone/cda/epd/p/id/2669
Also, first check the device in hyperterminal and then continue to program in labVIEW. You can find the serial VI's in Instrument I/O.

Take Control of Workflow with Workflow Analyzer! See Note 1369938.1

Take Control of Workflow with Workflow Analyzer! Immediate Analysis and Output of your EBS Workflow Environment.
The EBS Workflow Analyzer is a script that reviews the current Workflow Footprint, analyzes the configurations, environment, providing feedback, and recommendations on Best Practices and areas of concern.
Video - Watch a 9-minute overview video (9:00)
Go to [Doc 1369938.1|https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1369938.1] for more details and Script Download.
Proactive Benefits:
Immediate Analysis and Output of Workflow Environment
               Identifies Aged Records
              Identifies Workflow Errors & Volumes
              Identifies looping Workflow items and stuck activities
              Identifies Workflow System Setup and configurations
              Identifies and Recommends Workflow Best Practices
Easy To Add Tool for regular Workflow Maintenance
Execute Analysis anytime to compare trending from past outputs
[Please send any items to Feedback.|https://communities.oracle.com/portal/server.pt?open=514&objID=224&mode=2&threadid=297966]
Edited by: user715498 on Feb 14, 2012 11:09 AM
Edited by: user715498 on Feb 14, 2012 11:12 AM

14. Once my photos look the way I want, I then export them to JPEG. I have set up a Photoshop droplet for Lightroom that will then do all my sharpening after export.
That's it! I know it sounds like a lot of steps, but once you've done it a couple of times it goes by really quick. I'm really loving most things about Lightroom in terms of its cataloging and export options. But the image quality of the Lightroom raw conversions just isn't there yet. I've found by integrating both Capture NX and Lightroom I can get top quality results while still gaining advantage of Lightroom's many nice features. It took me a few days of exploration and experimentation to nail down the optimal workflow for my needs. Hopefully this will help some others out and maybe give them some ideas of their own toward a better workflow.
Please feel free to share your thoughts or own experience on all of this.
Thanks to Tony Long for his suggestion in this thread, which caused me to go on a search for the optimal Lightroom/Capture workflow: http://www.adobeforums.com/cgi-bin/webx?7@@.3bc719df/3
If you are interested in taking a look at the final output of the workflow listed above, please look here: http://photos.unsavory.com/p634883589
Cheers everyone!
-©aine

Can Wireless Home Audio products be controlled via IP with any other devices?

I'm interested in knowing if the Wireless Home Audio Director, Conductor or Player can be controlled via IP with alternative controllers? Specifically, I'm interested in integrating the products into a universal remote control or home control system and still have 2 way communications with feedback. IP and RS232 are the most commons ways of accomplishing this.

Hi,
Maybe for basic functions like (play, stop, next) using the IR remote, a third party IR based universal remote may work but that's a big gamble to take, anyway what would be the purpose then of the Linksys DMRW1000 (IP based remote control) remote that Linksys is selling if its compatible with third party remotes.
Wireless Home Audio remote
Well that's my thoughts on this, I hope you'll find the device your looking for.

Is this how i control frame rate with IMAQdr property node?

Is this how i control frame rate with IMAQdr property node? if not, can someone point me in the right direction? for some reason, it doesnt work..
Attachments:
pic.JPG ‏75 KB

Please see this related thread http://forums.ni.com/t5/LabVIEW/IMAQdr-Property-Node/m-p/1642950/highlight/false#M590168
Matt
Product Owner - NI Community
National Instruments

How to handle the table control While working with LSMW?

How to handle the table control While working with LSMW?

its possible in lsmw,
Hi,
LSMW will have a Indicator for headr and itam, i do not remember the correct field, but it will have an indicator, check the fields, there will be a single charecter lenght field, that should be the indicator, and using that we can write the logic.
check that single charecter field, it that is X that means the header record is processed, and do the items.
and, this is another way, try this out also
YOu can do this in "Define Source Structures" step,
the HEADER is defined first,
then the DETAIL below the HEADER.
add the fields to the structures.
Both should have some common key field
Please take care that the name of the common field is the same.
Once you do this it is linked. The you have a header and item corresponding to that header. then run the LSMW as you would.
Thanks

HT1926 I received an ITunes and Quicktime update notice on my Windows 7 PC, from Apple this morning. During the update installation, RealPlayer installed. What gives? Why is Realplayer installing with the Apple software.

I received an ITunes and Quicktime update notice on my Windows 7 PC, from Apple this morning. During the update installation, RealPlayer installed. What gives? Why is Realplayer installing with the Apple software.

Thanks for the reply. I went back to check if there was a history in windows (Event Viewer) but could not locate it in Win7. The only updates that were in the Apple Updater window were the Quicktime and ITunes. Had I let the Realplayer continue on its own, it would have installed the Google Chrome and other apps. I let it finish installing and then removed the entire program. I do not remember checking or seeing anything saying that realplayer was being downloaded until after a reboot was requested from the ITunes Update Installer.
I just thought it was strange since I do not use Realplayer and have not downloaded any software for it.
I am on a corporate PC with a pretty thick firewall, but something may have slipped through.
Thanks again for the assistance.

BAM Data Control - Group query with Active Data Service

Trying to get a group query from a BAM data control to work with Active Data Service in an ADF application (JDeveloper 11.1.1.4.0).
With a flat query, as the data changes, I can see DataChangeEvents fired, resulting in a data push to the client -
<BAMDataChangeEventFilter> <log>
#### DataChangeEvent #### on [DataControl name=CEP_Person_DOB_Flat, binding=data.view_mainPageDef.FlatDOB1.view_pageDefs_FlatDOBViewPageDef_WEB_INF_FlatDOB_xml_FlatDOB.QueryIterator]
Filter/Collection Id : 1966
Collection Level : 0
Event Id : 5
==== DataChangeEntry (#1)
ChangeType : INSERT_AFTER
KeyPath : [2157, 0]
InsertKeyPath : [null, 0]
AttributeNames : [id, _PersonKey, _County, _Surname, _AGE, _DOB, _Country, _FirstName]
AttributeValues : [2157, 10008/129, Vagzukarbsm, Gnnfzxxyqfgpsijcr, 110, Thu Dec 26 00:00:00 GMT 1901, Ekcqvrkoksr, Vwhm]
When I try a group query on the same data, currently just trying to group by _DOB for every 10 years to count the number of people, I get no data change events fired, so don't get any data pushed to the client, though the data has been changed if I refresh the page.
Any ideas ?

can you include bam and jdev versions and also include exception from logs?

How can i control background colors with items (registry.dat)

Hello Evry one.....
plzzzzzzzzz help.
how can i control background colors with display items
in registry.dat
like app.ui.requiredFieldvABGCOLOR=255.0.0
how can i control background colors with others items ????
thanks.

The iPhone has a "remote" app that lets you control Keynote on a Mac, but not on another iOS device (iPhone/iPad/iPod Touch).
There are some apps that let you control limited content on another iOS device - but the content has to be within the app. You might check out SyncPad - perhaps you can import the presentation into it and then control it on the iPad.

Control CS4 Licenses with Snow Leopard server

Hi there i have a team of designers and i have to control the applications that the access and im wondering if theres a way to control the lisenses with snow leopard server application restrictions.

You can allow or deny launching an application, to individual users, groups, computers or computer groups.
You can't allow x number of copies of Photoshop or any application to run concurrently until a license limit is reached.
You would need something like Sassafras Keyserver for that.
http://www.sassafras.com/

Have keyframes in effect controls window coincide with main time line

Hello,
Is there any way I can have the time line in my effects control window coincide with my main time line ?
Example, I add keyframes along my main time line, but any time I wish to edit them, I need to scrub my effect controls window timeline to get to that
spot that coincides on the main time line. I'm just wondering how I can have both time lines show the same area at the same time.
So if I'm at the end of my time line, and add a keyframe, and then wish to just scrub or move my cursor to the beginning of my main time line, the
time line in the upper window ( effects control window ) does not reflect the area of the main time line I am currently at, I need to actually click the time time
line ( main time line ) in order to "refresh" the upper effect control window time line.
Thanks for any advice,
Dave.

Hi Jim,
that's what I mean, thanks for info. I guess this isn't a popular want from users, I just thought it would be neat if we could do this, it's not a big deal, but I thought
I would ask. Thanks for the informatiion - at least I know now.
Dave
JSS1138 wrote:
I think he wants the CTI of the Effects pane to match the CTI of the sequence. If one moves, the other moves as well.
In CS4 this happens by default. Has that changed for CS5?

Access control's method with MVVM

Let's say I want to access an element control's method with MVVM.
My idea is to call these methods through an event fired from ViewModel, maybe using
DependencyProperty and Blend interactivy.
Some suggestions?

I don't really get what you're trying to achieve. Could you be more explicit?
If you need to name a control you're on the wrong track with MVVM! Generally you should really
not call a control's methods from a ViewModel, otherwise that'll make it impossible to run unit tests on that class.

Controlling RealPlayer 10 with Rem

Similar Messages

Maybe you are looking for