Controlling Session Id given to each new opened session on the terminal server 2008

Hello to all
How can we configure the terminal server so that,
when the user open a new session,
they will get the next number (Session Id)?
The need is, the Session Id always go forth (and to prevent the option that a session Id which was logged off will not be given to the next user session).
Alternatively, it will be Ok with us, if session ids which were logged off, will be blocked on "busy" and the server will not give those ids to new user sessions until the next server restart.
Thank you,
Yuval

Hi,
For your requirement, I've consulted with Server RDS expert, and the feedback is it is impossible currently.
If you have further question, please refer to Windows Server Remote Desktop Services (Terminal Services) forum:
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverTS
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

JRE on Terminal Server 2008 won't work in User Sessions

I have a problem with Java 6 Update 14 on a Windows 2008 Terminal Server.
Java Applications (from normal websites) are starting in Administrator account without any problems.
When i start several website with a normal User Account (Internet Explorer 8.0 installed), the Java-Console puts out the following error:
JNLPException[category: Systemkonfiguration : Exception: null : LaunchDesc: null ]
Then the Java tray icon is restarting for 1 or 2 times, and then the java-field on the websites stays emtpy.
Any idea which problem this could be? I think it would be a permission problem, but where i have to search?
Best Regards
Wolfgang Bauer

Now I've tried to install Firefox on the terminal server. Now in user sessions Java is working with Firefox, but not with Internet Explorer, so:
At Administrator account, Java Applets are working with IE and Firefox.
At user accounts, Java Applets work only with Firefox.
So where could be the problem with IE 8.0? When a Java page is loading, the Java tray icon appears for a few seconds, and goes away, 2 or 3 times.
I've already tried to reinstall Java 6
We need to open the Websites with Internet Explorer 8
Best Regards Wolfgang

TS3899 my iphone does not connect to my email provider and fetch my email. I have set up a new account but get the message "server is unavailable"..I have been getting emall ok previously, this occurred when I changed my password on my email account

My iphone does not connect to my email provider and fetch my email. I have been getting emall ok previously, this occurred when I changed my password on my email account. I have "set up a new account" but get the message "server is unavailable". I have tried several things but to no avail. Does anyone have the solution?
Thanks

Did you ever fix this problem? The same thing happened when I just changed my kids passwords and now can't access their mail on their iPods or my iPad but I use the same email provider and mine is fine however I did not change my password. If you fixed it how did you?

Trying to apply an update to Firefox, new window says 'connecto the update server..' but it never connects.

When turning on the computer, I am advised that an update to Firefox is available and it is highly recommended that I update.
But trying to apply an update to Firefox, new window says 'connecto the update server..' but it never connects.

Hello jwmoss, If there is an issue with update or permissions the better and easiest way is to download and install firefox:
1. Download a copy of the latest firefox from http://www.mozilla.org/en-US/firefox/all.html
2. '''''Trash''''' the current Firefox application to do a clean install.
3. Install the version that you have downloaded.
Do not select to remove your personal data, your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks or other personal data.
see also: [https://support.mozilla.org/en-US/kb/install-firefox-mac?redirectlocale=en-US&redirectslug=Installing+Firefox+on+Mac#os=mac&browser=fx18 Installing Firefox on Mac]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

I can't run visa interactive control window. ERROR MESSAGE: "Unable to open session "ASrl::INSTR" Status name VI_ERROR-RSRC BUSY Visa cannot curently access this resource.

I cant run tds220 (driver for oscilloscope).
Error message:
VISA: (Hex 0xBFFF000E) The given session or object reference is invalid.
Furthermore
I cant run Visa INteractive control.
Error message:
"Unable to open session to "ASRL1::INSTR" Return value 0xBFFF0072 Status name VI-ERROE-RSRC-BUSY . VISA csnnot currently access this resource."
Then change ports, this message appears for another port.
Thanks for answer.
Gita

The port is open by another resource. You note that you should also get an error if you try to access the port in hyperterminal. Try rebooting your computer and the first thing you try is opening a VISA session with Visa Interactive control(VISAIC).
If that fails, then you have a driver accessing your ports.
If it works then it was just two applications that were trying to access your port (LabVIEW and VISAIC are seperate apps even thought they both may be using VISA.)
Closing VISA sessions:
LabVIEW will only *automatically* close VISA sessions if you have this option set: Tools>>options>>Automatically close VISA sessions.
Otherwise you need to explicitly call a Visa close on the resource.

My vodafone emais get delivered to my BB each time I open them on the exchange server

Hi
each time I open an old email on my Outlook or on the exchange server, I get it send to my BB as if it was a new email.
It's driving me insane...Does anyone know how to fix thi?
Thanks
Lucia

Probably far too old to register. Sounds like a bug, stopping the "never" selection from working. You may be stuck with it.

SharePoint PowerShell script to open Excel.Application on Windows server 2008 R2

Hi
I am building a PowerShell script to open an Excel file store on SharePoint document library. Sound simple enough but I just couldn't get over an error and hopefully someone can help give an answer here.
I have found many sample codes to use. All of the sample codes show that a new object must be created for Excel application
like ($Excel = New-Object -comobject Excel.Application) before that excel file can be read.
When I run this comand on a SharePoint server (Windows 2008 R2) either inside the script or by itself I keep getting the following error:
New-Object : Cannot load COM type Excel.Application.
+ $excel = New-Object <<<< -Com Excel.Application
+ CategoryInfo : InvalidType: (:) [New-Object], PSArgumentException
For the test, I ran this comand on a Windows 7 with MS Office applications installed, then it ran fine.
Is that because I don't have Office application (Excel) installed on the server to run this or some services need to be turned on?
From the sample codes, look like I should be able to run it on the Server with SharePoint installed.
Thanks for any advice or solution to resolve my issue.
Swanl

So I'm assuming this won't return anything either?
Get-WMIObject Win32_ClassicCOMClassSetting | ? {$_.VersionIndependentProgId -like 'excel.application'}
You need Office/Excel installed on the server because you're accessing those .DLLs for the automation functionality, but depending on what you're trying to do you may be able to use one of the office viewers:
http://www.microsoft.com/en-us/download/details.aspx?id=10 although I'm not sure how much of the com (if any) is exposed in a viewer install. if Office is not possible due to
budget reasons, I believe there are several 3rd party providers who can produce a com object that will handle Excel formats.

"Access Control - Do Not Inherit" Grayed out when setting up a backup on Server 2008 R2 when trying to use remote NAS

I see one response here:
http://social.technet.microsoft.com/Forums/en-US/c99eead0-e2fc-4c83-8cb2-959d03512667/server-2008-r2-dc-backup-greys-out-do-not-inherit-option-for-file-share-backup
But it makes no sense to me. Running that command doesn't do anything.
How do I make the box stop graying out when setting up a backup with the GUI interface? This should be really simple I would think and for some reason the backup utility is graying out the "Do Not Inherit" option so I can backup to the NAS
device that has access control enabled in order to backup to the NAS.
Thanks in advance!

Hi,
From this article, it mentioned that it is by design that we cannot choose "do not inherit" in backup schedule when backup target is a remote shared folder.
Checklist: Schedule Automatic Backups
http://technet.microsoft.com/en-us/library/cc732540.aspx
If you use a remote shared folder, make sure that the folder is available, that you have write access to the folder, and that you are a member of the Administrators group or Backup Operators group on the computer hosting the folder. Each time you create
a backup, it will overwrite the older backups so that you will only have one backup at a time.
The backup will inherit the access control list (ACL) permissions of the folder.
For the account it required, as mentioned above, it should be "a member of Admin group or Backup Operators group, and it should have write permission on target folder".
Also map a network folder as a drive will not help show the mapped drive letter in backup destination. It is still a remote shared folder.
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

Got new update, instaled on my home server 2008, as I had the previous version. Now with the new Itunes my home sharring is ot working when it use to work fine on the older version

Got new iTune update, instaled on my home server 2008 r2, as I had the previous versionon here. Now with the new Itunes my home sharring is not working when it use to work fine on the older version. However this works fine on my windows 7, Iam guessing the new Itune doesn't support Server ? Or is there some thing i need to do. Can Apple Help me ?

Got new iTune update, instaled on my home server 2008 r2, as I had the previous versionon here. Now with the new Itunes my home sharring is not working when it use to work fine on the older version. However this works fine on my Laptop on windows 7, Iam guessing the new Itune doesn't support Server ? Or is there some thing i need to do. Can Apple Help me ?

Installing new Secuirty provider on the WebLogic Server

Hi Everyone,
I think you guys can find a solution for the problem i'm facing in configuring
the weblogic server. I'm evaluting the server a possible client and need to relpy
to him regarding the possible purchase before the mid of next week.
Problem: The problem i'm facing is as follows. I wrote a web service, I'm trying
to install a new service provider on the server. I did copied the jar files to
the java_home\jre\lib\ext directory and did made the change to the java.security
file as suggested in the "Professiona Java Security" book by wrox publication
. But when i run the code it doesn't works on the BEA Server. Even though i tested
successfully on the java server.
The client wwritten in Java works fine. but the server, when tries to make call
to service, it fails on the call to the Encryption algorithm class.
Does any one of you have a solution for this problem. I'm waiting for your reply.
Thanks in advance?
Sumit
SETA Corporation
Virginia

Hi Boris,
Looks like you have not run the post upgrade script for 10.1.3.4.
You need to install SOA 10.1.3.4 Basic Installation. Then start following : http://download.oracle.com/docs/cd/E12524_01/core.1013/e13058/weblogic.htm#BHCIIBFB
You basically, first install 10.1.3.4 basic SOA install, Apply the Opatch 7337034 (HOTPLUG: SOASUITE 10.1.3.4 ON WEBLOGIC 9.2 - CHANGES FOR HOTPLUGGABILITY). Install WLS 9.2 MP3.
Now, Download the Oracle SOA Suite 10.1.3.4 WebLogic Server 9.2 : patch : 7490612.
Then , Modify the following mandatory installation properties in the Weblogic_SOA10134_Base\SOADomain.properties file as per the documentation above.
Cheers
Anirudh Pucha

Need to open a case for Windows Server 2008

Hi,
I'm new to this forum and my first impression is that it is "not friendly" :(
I'm looking for a section where to post a Windows Server issue, but there is not a topic for that. Where could I post it?
Thanks
Max

When you state that the forum is not friendly I hope you mean the layout etc, as I think that people who give up their own time to help others are most friendly.
You could try the Windows Server section?
Kind regards, Kev

Since updating to Ios7 I can't download films on my iPad mini, also iCloud seems to turn itself off. My other iPads are fine, as the mini was under warranty, they have given me a new one. However the problem is still there.

Since updating to IOS 7 I can't download purchased movies, I think the problem is iCloud, as that also keeps turning itself off.
I've been given a new iPad by my local apple store as it was under warranty, but I'm still having exactly the same, so it's not the pad, also my other pads are ok

If you are completely confident that you didn't hide it, then you purchased those with different apple id. If you completely confident that you purchases with same apple id then you have hidden it. One of the other or you are speaking about a miracle. While miracles are possible they are not very likely. Remember
Occam's razor?

How can I uninstall firefox when the add/remove programs in control panel doesn't work, nor does opening it in the run command?

I tried to uninstall firefox using the control panel, add/remove programs. When I click on remove it does nothing. Then I tried using run, firefox, uninstall, helper and this does nothing either. Is there another way to remove it or repair it? I am using windows xp not 2000.

For details of how to manually remove Firefox see http://kb.mozillazine.org/Uninstalling_Firefox - it gives details of the folders you need to delete.
What is your problem with Firefox, re-installing Firefox does not normally fix problems.

Thunderbird cannot open attachment after idle for several hours on Windows Terminal Server 2008 R2 Enterprise

We are using Thunderbird on WTS2008 R1
Cannot open attachment after thunderbird is launched for a short period of time. Tried to save attachment but the attachment saved actually comes with 0kb. Thunderbird works fine after restart itself, not sure if any settings can fix this?

Hi Darrkon,
I suggest checking the status of the HealthMailbox on each of servers.
Also try to re-create the mailbox. You can safely delete and recreate health mailboxes.
Be aware that any local Managed Availability probes that are using the these mailboxes will fail until the Microsoft Exchange Health Manager is restarted. Once that service is restarted, it will recreate any mailboxes that it needs.
More details in the following similar thread, just for your reference:
BSOD after creating DAG
http://social.technet.microsoft.com/Forums/exchange/en-US/44d1cd98-cba1-4ed0-b0e7-8aa76ee3eabc/bsod-after-creating-dag
Thanks
Mavis
Mavis Huang
TechNet Community Support

Cannot open files on the network server.

Folks:
I have a user running Acrobat X Pro. The program works fine in all respects except one: When he tries to open a PDF that is on the server, he gets an error message:
"There was an error opening this document. This file cannot be found."
He has NO problem opening the same file from within Acrobat. He cannot open it from an Explorer window or directory listing.
In a related problem, if he tries to open a file or folder using the mapped drive letter, he gets an error message:
"Windows can't find 'G:\'. Check the spelling and try again."
So this all points to a problem related to Acrobat not recognizing the computer's drive mapping --- but this problem does not exist on any other workstation on the network (all Win8 virtual machines using Acrobat Pro X). But I cannot figure out what the problem is.
Any help? Please?!?
Thanks!
Micah

I am having precisely the same issue.
I am running Adobe Acrobat XI Standard on Windows 8 Professional. All updates have been applied to both.
(I have 4 other computers with identical configurations where this problem does not occur.)
In the problem machine (and a 2nd computer with the same issue) I can easily open the file using a UNC path, e.g. \\server\h\filename.pdf in Adobe Acrobat.
Using the drive mapping, net use h: \\server\h, I cannot access the file H:\filename.pdf.
I can't open H: from within Adobe Acrobat either, not just the PDF.
I can open any other file on that drive with any other program.
I can open \\server\h\filename.pdf and the H: drive from Foxit Reader installed on the same computer.
The specific problem is that Adobe Acrobat XI can't open or see a mapped drive by drive letter.
Any ideas?

Controlling Session Id given to each new opened session on the terminal server 2008

Similar Messages

Maybe you are looking for