Controlling spry accordion from flash doesn't work in IE 8

Hi all,
I created a spry accordion in an html page and a little spry controller in flash, on the same page.
The flash controller contains buttons that should trigger the accordion in the same page.
here is the code I inserted in a flash button:
on (release) {
getURL ("javascript:acc_ricette.openPanel('mypanel_ID'); return false;")
where mypanel_ID is the ID of the accordion on the page.
When I click any flash button this works perfectly in firefox and chrome, but it doesn't work in IE 8 and Opera.
The accordion itself (not using the flash buttons) works in all browser.
Is there a solution
TIA
tony

Similar Messages

Why Position:Relative from CSS doesn't work at Safari 5.03?

If you watch my web page: http://clubdeleonesst.tk
I designed a ComboBox and have some problems with position relative. I used jQuery to create it, you could watch the original example here:
http://www.marghoobsuleman.com/jquery-image-dropdown
And I have been watching that the transparency from Flash doesn't work too. I hope you can solve these bugs.
Message was edited by: FANMixco
Message was edited by: FANMixco

The "disappearing" affect you describe is not normal. You may need to reinstall Safari.
First, try removing the Apple cookies from your Safari Preferences>Security>Cookies panel. Also, go to your Safari Menu and Empty cache. Then try to log-on to Apple Discussions.
Also, regarding the "disappearing" effect, try Safari from another User Account.
Here is guidance from Apple on how to set up the account. You can ignore step 7 in the article.
Also, on the system preference>Accounts panel, click on "log-in" options. There, select "fast user switching". This allows you to go back and forth between user accounts via an icon in your Menu Bar at the top of the computer screen.
Log-on to the new account and start Safari. If Safari is stable in the new account, then your problem is specific to your regular user account. Otherwise, similar response means a system-wide problem.
Post back with results.

I have a black iphone 5 and my flash doesn't work it used to work every once in a while but stopped

I have a black iphone 5 and my flash doesn't work it used to work every once in a while but stopped I went into the camera app and tried to see if it would flash when I took a picture but I saw it light very faintly and hasn't done lot up since. Should I get the led replaced?

First, try bringing up Control Center by swiping up from the bottom of the home screen. Turn on the flashlight by tapping the icon in the lower left. Does the flashlight work? If not, perhaps you have a hardware issue.
If it works, check the top of the screen when you open the Camera app to make sure you have the flash on.

IPhone 4s glitches, is cracked, and camera flash doesn't work. What is the cost to exchange for a new one?

Front screen of my iPhone 4s is cracked, it freezes/lags, camera flash doesn't work, and every time you press a bit harder on the front screen red and grey vertical lines appear. I have had it for more than a year now, so how much will it cost for me to replace it?

These prices are for the U.S.
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model          Out-of-Warranty Service
iPhone 5          $229
iPhone 4S          $199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone          $149
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in U.S. dollars and are subject to local tax.
When setting up out-of-warranty service, Apple will request credit card pre-authorization for the maximum service fee listed above. This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare service contract coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.

Flash doesn't work suddenly [SOLVED]

Today flash doesn't work anymore, I do not remember any modifications. In Firefox the browser segfaults after a few seconds of flash content. In Opera the flash area is replaced with weird graphics http://img294.imageshack.us/img294/5845 … 0x800s.png like this. I reinstalled flash10, no help. I installed flash9, no help, same problems.
Also, gnash plugin works for most flash content, but not for youtube though (on youtube I'll just get a blueish empty screen). Viewing flash videos is a must for my PC use..
EDIT:
I discovered that my sound didn't work, and I remember removing dbus from my modules since somebody says HAL starts it.
I solved it by adding dbus after hal in modules. I know that people say you shouldn't do that, and it creates this error text at bootup, but that did fix my sound, and my flash issues. Weird.
Last edited by nawitus (2009-05-19 10:03:38)

that didnt do the trick either.
I decided to reinstall flashplugin, and then i noticed a warning that said "warning: directory permissions differ on usr/lib/mozilla. filesystem: 700 package: 755."
should i just try to chmod /usr/lib/mozilla, and then reinstall Flash?
EDIT: Yep, i just ran sudo chmod 755 /usr/lib/mozilla, and reinstalled flash. Works well
Last edited by DisturbedFood (2011-03-17 20:52:35)

Flash doesn't work in Firefox 13

Installed Firefox 13 yesterday. Now flash doesn't work. Have done all the supposed fixes to no avail. Have uninstalled and reinstalled flash. I'm at my wits end with this issue. I'm a web designer who uses flash in a number of my sites. VERY IRRITATING when my sites don't display properly. Anyone have a solution other than the pat Mozilla "fixes"?

I received a PM from '''CheckMate''' about this thread. Since this is something that I think should be discussed openly I'll reply here.
The ActiveX plugin (npmozax.dll) issue is now fixed via the Mozilla blocklist, which automatically disables it. For some background on the ActiveX plugin issue, see [https://support.mozilla.org/en-US/forums/contributors/708425 Blocking the old ActiveX plugin] in the contributor's forum thread.
The Flash 11.3 Firefox protected mode problem is a separate issue and one related bug is [https://bugzilla.mozilla.org/show_bug.cgi?id=747683 747683] So, if you did have the ActiveX plugin installed and it is now disabled, AND you have Flash 11.3 installed, then the issue is no longer the ActiveX plugin.
If the problem is Flash 11.3 protected mode (or other issues with Flash 11.3) it's not a good idea to suggest downgrading to 11.2.202.235. The reason why uninstalling Flash and going to a page that requires Flash installs an older version is because the Plugin Finder Service hasn't been updated yet! This is from http://kb.mozillazine.org/Flash#Installing_Flash_on_Windows <br>
'''Quote:'''<br>
''If the Flash plugin is not installed and you visit a page that has Flash content that requires the plugin, the Plug-in Finder Service can download and install Flash for you (see [https://support.mozilla.org/kb/Installing+the+Flash+plugin Installing the Flash plugin (Firefox Support)] for more information). If you want to try this method and Flash is already installed, you can [http://kb.mozillazine.org/Flash#Uninstalling_Flash uninstall Flash] and then visit [http://www.adobe.com/software/flash/about/ Adobe's Flash test page] to launch the Plugin Finder Service ; however, it may offer you an outdated version.''
The alternative (disabling Flash 11.3 protected mode by editing an obscure file) is not good either. I don't know what to suggest in those cases. I think it would be a good idea if you could bring this up in the SUMO Community Discussions forum. There's already a topic started on Flash 11.3 issues, here:
*https://support.mozilla.org/en-US/forums/contributors/708430 Flash 11.3 issues (was: flash 11.3 released)
Here is your original message, for reference:
''Hi, Alice- You locked the thread on the Adobe Flash Plugin update 11.300.257 not working question but you really shouldn't have for the following reasons. First, although I too found today that the Active X has been blocked as of June 7, the problem persists and the instruction is to contact the manufacturer. How about contacting Adobe and straightening this out on the Developer level instead of closing the thread because there's another temporary but much simpler solution that I found. Second, the instructions on how to disable Protected Mode are nuts. I'm pretty advanced, but my common sensed tells me this is too complicated to bother with and shouldn't be necessary and you yourself say this isn't a permanent fix. Third, I found a much simpler solution, at least until this bug is fixed. Completely uninstall the Plugin from the Add and Remove Programs list. Then, when you try to access any video on YouTube which uses the Plugin, Firefox reports that it needs an additional Plugin to play the video (look specifically for the FF blue plugin icon). When you click on it, it automatically downloads the PREVIOUS VERSION, 11.2.202.235 which works perfectly. But if you click on the warning below it that Adobe Flash is needed, the buggy 11.3.300.257 version will be installed again! This has to be fixed by the Developers. Until it is, the fix is simply to roll back the faulty update, which could have also been done with a restore point but I wanted to find the cause. FF apparently knows automatically that this plugin is faulty and installs the previous version, but the other instruction is contradictory and installs the 11.3.300.257 Nice!?!? ''

Edit in Photoshop from Lightroom doesn't work; Automate Photomerge doesn't work

Edit in Photoshop from Lightroom doesn't work.
It opens the Photoshop application with all the menus/windows, but it never opens the actual image I chose to work on.
Likewise, I also can't automate>Photomerge ... I pick all the images for the PHotomerge and hit "okay," but nothing happens. Makes me think it's Photoshop, not Lightroom, that is all wacky.
I'm on a Mac, using OS X Yosemite, 10.10.1 Lightroom is version 5.7 Photoshop is CS5, version 12.0.4
I uninstalled Photoshop CS5 and reinstalled. No change. I also tried dumping PS preferences, but that didn't affect a thing, either.

None of my "Edit In" worked with the pictures in Lightroom for a particular folder. I expanded the 2014 folder and found that two subfolders had a "?" in front of the 2014-07-04" and another. In other words, the folder was missing. After I found the missing folders using the Lightroom "Find Missing Folder" option, I was able to use the "Edit In" menu item. The 2014 folders weren't expanded at first, so I didn't see the ? marks in front of them. With the missing folders, Lightroom's "Edit In" option was basically telling me there was no picture to "Edit In." Howerver, I have Previews and Smart Previews made when I import picture files into Lightroom. So, the "pictures" showed in the slide strip on the bottom, and also in the display in "expand," but it was actually only showing the previews I had built, not the actual missing pictures in the missing folders. I had accidentally moved some directories using Windows Explorer, and I didn't realize my "happy fingers" moved them outside of Lightroom. Of course, Lightroom has no way of knowing I moved them, and just shows the "?" before the missing folder name. After expanding the root folder, then knew what to do. Fixed it easily. It was frustrating, and took about 20 minutes to see the problem. And that fixed the greyed-out "Edit In" Photoshop CC 2014, and all the other plug-ins were greyed out too.
Hope this fixes your problem.
Mike

I have latest version of flash but flash doesn't work in safari!

Why do I have latest version of flash but flash doesn't work in safari!I have flash for mac.Your help will be appreciated.

If you're talking about using Flash on your iPod, you can't. There is no version of Flash that will work on any iOS device. If you're talking about using Flash on your computer, you may want to repost in the correct forum.

Flash doesn't work and work with another browser!!

''locking as a duplicate of - https://support.mozilla.com/en-US/questions/900202''
Flash doesn't work and work with another browser!!.
The message is " An error occurred, please try again later" just with youtube. Other sites work. Another browser works with youtube!!

Whay do you mean "difficult with the camer?"
Two things that might help. Reset all your settings and reset the phone. Use the Settings app to reset all settings. Settings > General > Reset > Reset All Settings Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that helps.

My Flash doesn't work on IE 8

I am a webmaster with an existing flash on
http://www.patriciawells.com
No changes to the flash in about a year. Works great on IE 7,
Firefox, Netscape, Opera, etc....
Downloaded IE 8 Beta 2 this morning and the flash doesn't
work.... Displays an x in the box (like a missing pix on an html
page).
Called Microsoft and they basically told me take a long walk
off a short pier.... So much for them caring about how their beta
works....
Any suggestions would be appreciated.
Thanks
JohnJ

RaleighPilot wrote:
> I am a webmaster with an existing flash on
http://www.patriciawells.com
No
> changes to the flash in about a year. Works great on IE
7, Firefox, Netscape,
> Opera, etc....
>
> Downloaded IE 8 Beta 2 this morning and the flash
doesn't work.... Displays
> an x in the box (like a missing pix on an html page).
>
> Called Microsoft and they basically told me take a long
walk off a short
> pier.... So much for them caring about how their beta
works....
Well, all your object embed tags are correct so it's
obviously the Beta problem.
Nothing can do about it.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

HT204022 Can't seem to get rid of any photos in Photo Stream from my iMac. Following instructions from Apple doesn't work!

Can't seem to get rid of any photos in Photo Stream from my iMac. Following instructions from Apple doesn't work!

You need to update iPhoto. The latest version is 9.4.2.
To do your updates, do the following:
Software Updates
How to do software updates via the apple menu - http://support.apple.com/kb/ht1338. - is a link to Apples article on updating the software on your computer
How to do software updates via the App's store - PH2730 - Mac App Store: Update applications and http://support.apple.com/kb/HT4710.
If you need info on your apple ID -
You can visit the Apple ID Support page - http://www.apple.com/support/appleid/ - to learn more about your Apple ID, or visit the - Apple ID Frequently asked questions page - http://support.apple.com/kb/HE37.

"Exclude page from menu" doesn't work

Choosing Page > Page Properties > Menu Options > Exclude page from menus doesn't work for me in the current release. Anybody else having this problem?

Humm?
Just tested both your process and again by going to Plan View > rt-click on page > Menu Options and both instantly remove the page.
Have you tried just making simple/quick test site with 2-3 pages and trying?
Maybe somthing in your site and not in Muse that's causing the issue.

IPhone 5 torch and flash doesn't work

iPhone 5 torch and flash doesn't work? How can I activate?

The flash is activated as follows:
When you are in camera mode, and the camera is open about to take a photo, you will see an elliptical button in the upper left with a flash-like sign. Press that button and you will find it has three settings: Auto, On, and Off.
Choose one.
I don't know what you mean by "torch".

Exports from Keynote to Flash doesn't work

I am trying to create an automatic slide show and export it as an .swf (or anything) to run on a web site and it doesn't work. For documentation of my tests go to: http://www.equalivote.com/abKeynoteExportTESTS.pdf

Another thought: If you need it to be flash, could you export the slideshow to quicktime, then put the quicktime movie into a flash project? I'm not too familiar with flash but it seems like that would be worth a try.

Calls to JavaScript from Flash doesn't seem to work!!!

Does anyone met this strange issue, the calls to JavaScript
using getURL() doesn't work in IE (6.0.2900.2180). External
Interface doesn't work either when trying to call some function
defined in HTML-page body. Drives me crazy! HELP!!!

Thanks! When page is loaded from the server everything works
alright. But what to do when developing local browser-oriented
applications? Gues this is some sort of security features that
Windows or IE has acqured.

Controlling spry accordion from flash doesn't work in IE 8

Similar Messages

Maybe you are looking for