Controlling the colour of chart bars

A quick question to which i think i already know the answer.
Is there anyway of controlling the colours of bars on a report chart, depending on the data being displayed?
I have a graph of sales/store and which to assign stores their own individual colour, but each store can have multiple bars. Which was done like....
select store, actual_sales
from table
union
select store, planned_sales
from table
union......
Thanks, Matt.

Right now it is not possible. But is is expected in a future release
null

Similar Messages

Change the colour of title bar of frame

how can we change the colour of title bar of any frame?

i want to have control of the title bar.there must be some way out.look & feel gives it colour of that perticular types colour(motif,met,native).but i want my choosen colour for it.if you have any direction to solve it please suggest me that.

How to change the colour of chart in WAD.

Hi,
I have problem with web report. The web report with bar charts used to show with different colours earlier. Now when I execute the web report, the chart displays in single colour (All the rectangular bars in the charts are displayed in single colour say for example red). customer would like to see the chart with different colours. Please put some lights on it how to change the colour of chart in the report.
Thanks,
Sravan.

Hi Krish,
I have followed the steps which you suggested, but I am unable to see the changes when I execute the web report.
I could able to see the colour changes to the bars in the chart in the preview (i.e when I select the series 1 and change the colour for series 1 under Area properties). Like that I have done for all the 5 series, then I have clicked on Complete button, saved the web template and executed it, and I could able to see the changes in the preview but not in the report after execution.
I have two charts in my case, one is <b>Job function</b> chart and the other is <b>Job type</b> chart. The Job function chart is displaying with different colours from the begining, but the job type chart is displays all the columns in RED colour.
Is there any setting I need to do after selecting the colour at the series level.
Please correctt me if I am worng in doing the procedure.
Please update me how to do it...It is usefull if you can come back to me ASAP .
Thanks,
Saravanan.
Message was edited by:
        SARAVANAN PAYANI
Message was edited by:
        SARAVANAN PAYANI
Message was edited by:
        SARAVANAN PAYANI

How Can I change the colour in title bar of Window in Form 9i

Hello
All,
I want to change the colour of title bar in window ?
how can I ?
From
Chriag Patel

Chirag,
this is not in a scope of control for Forms and instead determined by the look and feel.
Frank

How the hell do you stop ATI Catalyst from controling the colours?!

Hi all, I've posted this on the ATI website but thought I'd try here for some expertise from the Adobe people because this has to do with colour profiles and people here may know more.
This is beginning to annoy me. Sorry for the bad tempered start.
I've just bought a 1GB Sapphire HD 4850. And to cut a long story short, when I'm using my Adobe products, there is a colour tint to all images. When I had my previous nVIDIA card, I had no problem. When I uninstall all drivers, again there is no problem with colours. But when I install the Catalyst software, I have problem.
Now, I'm a photographer and use Lightroom, Photoshop and Bridge regularly. I just upgraded to CS4 which I'm still trying out. (I have no idea if this happens in CS3 as it's no longer on my computer.) I got the card on Friday, shot a wedding yesterday. As you can imagine, I'm not in the best mood. I've searched and searched and it seems to be down to the colour profiling which is enforced. After reading http://forums.amd.com/game/messageview.cfm?catid=279&threadid=97593 I've tried installing Powerstrip and loading the colour profile before I installed the card, but that hasn't worked. In fairness, I haven't spent too long figuring out how to use Powerstrip. But at the same time, I don't want Catalyst managing any profiles. My monitor and programs are just fine without it. Furthermore, I'd like to be able to easily choose what manages what.
So please, anyone, how to I completely remove all colour control from Catalyst. Either that or how can I
System:
Phenom 9950 BE on M3A32-MVP Deluxe mobo
4gb ram (but only 3 used because I'm using XP Pro SP3)
1gb Sapphire HD4850 using Catalyst 8.11
Lenovo L220x (primary) and Viewsonic VX924 (secondary)

[newsreader autoquote deleted by forum host]
It's simple, delete it. Catalyst is unnecessary for the operation of
your computer. When you delete it be sure you don't get the video driver
or you will have to go the ATI site and download it again. And if you do
you can down load just the driver without Catalyst.
Catalyst is a video tool for people who don't want to use the tool that
is built into windows.
John Passaneau

How do I control the colour of hyperlinks in send mail

Irrespective of what colour I set as the default for e-mail text, if I include a hperlink it is transformed into blue and underlined. Can I influence this in any way...I'd like al my links to stand out with a different colour to blue.
Cheers
TD

Ok, so if i create my own cell renderer do I set it as the default renderer for the whole table i.e.
table.setDefaultRenderer(MyCellRenderer, renderer);
Does this set one cell renderer for the whole table or is there an individual one for each cell?

Fix colour for title bar

how to make title bar have a fix colour for every OS platform ?

I think you can.
Have a look at
setDefaultLookAndFeelDecorated() in the
Javadocs of JFrame and JDialog.
Regards,
Timno, using LookAndFeel will make the colour of title bar dynamic, i will have different colour for different OS.
i want to set a specific colour for title bar in top level container component (JFrame or JDialog), then it will be the colour for every OS and the colour will not change even user set different colour scheme.

Is it possible to change the colour of the bars in a chart on the iPad?

I'm using keynote for iOS and I'm trying to pick the bar colour for my charts. I understand that the default settings will change the colour for each new series but I have a few charts all with a single series and I would like to change the colours along the way. Below is an image from my presentation, basically I'm looking for guidance on how to make the blue bars into red bars.

Set the grid background color black and set the GridItem background color something else.
Here is an example.it is better to set this kind style attributes in css
<mx:Grid backgroundColor="#000000" verticalGap="0">
   <mx:GridRow>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
   </mx:GridRow>
   <mx:GridRow>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
    <mx:GridItem backgroundColor="#FFFFFF">
     <mx:Label text="Testt"/>
    </mx:GridItem>
   </mx:GridRow>
</mx:Grid>

I would like to change the colour of bars in a chart without losing the underlying default texture associated with my chosen theme. None of the 3D textured fills offered in "Chart Colors" match the textured fill of the theme. Any suggestions?

I would like to change the colour of bars in a chart without losing the underlying default texture associated with my chosen theme. None of the 3D textured fills offered in "Chart Colors" match the textured fill of the theme. Any suggestions?

Thanks Gary, but no, that does not work. First of all, I can't select each bar individually. When I click on one bar, all three bars are selected.
When I use "inspector > graphic" I have 5 fill options: none, color, gradient, image, tinted image. The default selection for the theme I'm using is image. What I would like to use for my charts is the same image that this theme uses for table headers. It has the same texture as the chart, but a different colour. Using anything but image or tinted image removes the texture from the fill.
I have found I can do one of two things. I can select tinted image from the fill selections in "inspector > graphic" or I can select 2D Image Fills from "inspector > chart > chart colors". The first choice does not allow me to match the table header colour because it only allows me to apply a tint to the existing colour and adjust its opacity. The existing colour has too much influence on the fill, so I can't find an RGB adjustment that will match the table header colour. The image selections from "inspector > chart > chart colors" do not quite match the colour or the texture. Again, I can try to tint the image, but I still can't get it to match and the texture is not the same anyway.
The image I want to use obviously exists in the software as it is an attribute of the theme, but for some reason is inaccessible. The other angle I have tried is to edit the theme, but I can't figure out how to do that either.

How to I change the colour (or hightlight) some of the bars in a bar chart in Keynote?

I am using Keynote 6.2.2. I have prepared a chart which displays the quarterly income (as a points on a line) and expenditure (as bars) for the past 3 years. I wish to highlight the Q1 expenditure bars for comparison reasons. At the moment all the bars are coloured red (and the income lines, blue). How can I either change the colours of just the Q1 expenditure bars for each year?

You need to change to; plot columns:
select the chart
click the Edit Chart Data button
click the plot columns button (arrowed)
select the chart then select the individual bars to be changed:

Is it possible to vary the colours of bars on a bar chart on the same axis?

Is it possible to vary the colours of bars on a bar chart on the same axis (I would like every cell value below 7 to be in red and above 7 to appear in green)?

Thank you for picking up on my question. I have subsequently found a conversation thread which gave me a solution. I found that I needed to create additional rows to accomodate values above or below the level that required a different colour and then use a stacked bar chart. The following shows what I needed to create. Apologies for wasting your time, but I only found the relevant conversation after posting my question.

Fine-grained control of colors in a bar chart

Hello,
Short version: How do I control the colors of the bars in a bar chart in Keynote, so that each bar, representing a particular entity, retains its color no matter its position relative to the other bars after updating the chart?
Detailed version: I am using iWork '09. In Keynote I have a 3D bar chart showing an indicator for different companies (industry comparison). The companies are sorted in ascending order by revenue, so that the lowest bar (company with smallest revenue) is to the far left and the tallest - to the far right. I update the chart regularly. I have the following problem: each bar, representing a company, is in a particular color. When I update the chart, if the the order of the companies changes, the colors of the bars do not change, so that in the new chart the order of the colors is the same, although some or all of the bars now represent different companies. In other words: if in version 1 company A is in red and comes before company B which is in blue, if in the next version company A comes after company B, I want its bar to still be red. In the current situation, if company A comes after company B its bar will be blue and comapny B's will be red, i.e. red still comes before blue.

I have to give up the beautiful colors of the automatic chart and only use the restricted number of colors from the color well.
There is no restricion in the choice of colour, the colour depth on a Mac has over 16 million to choose from.
Further, the fill type has options for; colour, gradient, image and tint

Controlling Chart Bar Colors

Hello, I'm just beginning to add charts to my application and I'm finding it difficult to control Chart bar color dynamically. I would like Red, Yellow, Green bars based on limits on the Bar value. Example Values under 5 may be Green, 5 - 9 Yellow, and over 10 Red. The HTML chart appears to either be Random or one Specifc color, and the SVG Chart appears to only be a sinlge color. Both are chosen on the attribute screen of the chart.
Anyone done Dynamic Chart Bar coloring? - Thanks

Hi, and welcome!
Have a look at: [http://apex.oracle.com/pls/otn/f?p=44602:2]
To get this on a Flash Chart, I have:
1 - Set the chart type to: Stacked 2D Column
2 - Set the Color Scheme setting to: Custom
3 - Set the Custom Colors to: red,yellow,green
4 - Created THREE series (with a maximum of 15 rows each) with the following SQL statements:
Series 1:
SELECT NULL LINK, ENAME LABEL, CASE WHEN SAL < 1000 THEN SAL ELSE 0 END VALUE FROM EMP WHERE SAL IS NOT NULL ORDER BY ENAME
Series 2:
SELECT NULL LINK, ENAME LABEL, CASE WHEN SAL BETWEEN 1000 AND 2000 THEN SAL ELSE 0 END VALUE FROM EMP WHERE SAL IS NOT NULL ORDER BY ENAME
Series 3:
SELECT NULL LINK, ENAME LABEL, CASE WHEN SAL > 2000 THEN SAL ELSE 0 END VALUE FROM EMP WHERE SAL IS NOT NULL ORDER BY ENAME
As long as my SQL is correct and the SAL value ranges don't overlap, each ENAME entry will appear in one, and only one, series - for the other two series, the value will be reset to 0, so nothing is shown.
Andy

My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>

Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

How do I remove the coloured bars from running down the side of my emails.

How do I remove the coloured bars from running down the side of my emails.

Hi
The setting I have in Composing are-
Composing
Message Format - Rich Text
In addressingonly have tick in When sending to a group
Responding - tick only the first two boxes
Last only the bullet for Include selected text
Hope htis helps

Controlling the colour of chart bars

Similar Messages

Maybe you are looking for